diff options
| -rw-r--r-- | tests/suites/performance/long_bridge_domain.robot | 88 | ||||
| -rw-r--r-- | tests/suites/performance/long_ipv4.robot | 129 | ||||
| -rw-r--r-- | tests/suites/performance/long_xconnect.robot | 83 | ||||
| -rw-r--r-- | tests/suites/performance/short_bridge_domain.robot | 85 | ||||
| -rw-r--r-- | tests/suites/performance/short_ipv4.robot | 93 | ||||
| -rw-r--r-- | tests/suites/performance/short_xconnect.robot | 92 |
6 files changed, 443 insertions, 127 deletions
diff --git a/tests/suites/performance/long_bridge_domain.robot b/tests/suites/performance/long_bridge_domain.robot index 44cab87df4..477e0467ed 100644 --- a/tests/suites/performance/long_bridge_domain.robot +++ b/tests/suites/performance/long_bridge_domain.robot @@ -20,6 +20,12 @@ | Test Teardown | Run Keywords | Show statistics on all DUTs | ... | AND | Reset startup configuration of VPP on all DUTs | Documentation | *Throughput search suite (based on RFC2544).* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link +| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per +| ... | direction). Packets contain Ethernet header, IPv4 header, +| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are +| ... | matching MAC addresses of the TG node. *** Test Cases *** | Find NDR by using RFC2544 linear search and 64B frames through bridge domain in 3-node topology @@ -27,16 +33,13 @@ | | ... | Find throughput with non drop rate for 64B frames by using | | ... | linear search starting at 4.1Mpps, stepping down with step of 0.1Mpps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 4100000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} @@ -47,16 +50,13 @@ | | ... | linear search starting at 812,743pps, stepping down with step of | | ... | 10,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} @@ -67,16 +67,13 @@ | | ... | linear search starting at 138,580pps, stepping down with step of | | ... | 5,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} @@ -86,16 +83,47 @@ | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | linear search starting at 8.2Mpps, stepping down with step of 0.1Mpps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 8200000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Linear search +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by +| | ... | using linear search starting at 812,743pps, stepping down with step +| | ... | of 10,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by +| | ... | using linear search starting at 138,580pps, stepping down with step +| | ... | of 5,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} @@ -106,17 +134,47 @@ | | ... | frames by using linear search starting at 9.8Mpps, stepping down | | ... | with step of 0.1Mpps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 9800000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B +| | ... | frames by using linear search starting at 812,743pps, stepping down +| | ... | with step of 10,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through bridge domain in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B +| | ... | frames by using linear search starting at 138,580pps, stepping +| | ... | down with step of 5,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} diff --git a/tests/suites/performance/long_ipv4.robot b/tests/suites/performance/long_ipv4.robot index 7b2111ab63..ac363136af 100644 --- a/tests/suites/performance/long_ipv4.robot +++ b/tests/suites/performance/long_ipv4.robot @@ -24,6 +24,12 @@ | Test Teardown | Run Keywords | Show statistics on all DUTs | ... | AND | Reset startup configuration of VPP on all DUTs | Documentation | *Throughput search suite (based on RFC2544).* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link +| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per +| ... | direction). Packets contain Ethernet header, IPv4 header, +| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are +| ... | matching MAC addresses of the TG node. *** Test Cases *** | Find NDR by using RFC2544 linear search and 64B frames through IPv4 forwarding in 3-node topology @@ -31,16 +37,13 @@ | | ... | Find throughput with non drop rate for 64B frames by using | | ... | linear search starting at 4.1Mpps, stepping down with step of 0.1Mpps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 4400000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} @@ -51,16 +54,13 @@ | | ... | linear search starting at 812,743pps, stepping down with step of | | ... | 10,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} @@ -71,16 +71,13 @@ | | ... | linear search starting at 138,580pps, stepping down with step of | | ... | 5,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} @@ -90,36 +87,134 @@ | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | linear search starting at 8.8Mpps, stepping down with step of 0.1Mpps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 8800000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Linear search +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by +| | ... | using linear search starting at 812,743pps, stepping down with step +| | ... | of 10.000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by +| | ... | using linear search starting at 138,580pps, stepping down with step +| | ... | of 5,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through IPv4 forwarding in 3-node topology | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | linear search starting at 9.8Mpps, stepping down with step of 0.1Mpps +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B +| | ... | frames by using linear search starting at 9.8Mpps, stepping down with +| | ... | step of 0.1Mpps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 9800000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B +| | ... | frames by using linear search starting at 812,743pps, stepping down +| | ... | with step of 10.000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B +| | ... | frames by using linear search starting at 138,580pps, stepping down +| | ... | with step of 5,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 64B +| | ... | frames by using binary search with threshold 5,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${binary_min}= | Set Variable | 8000000 +| | ${binary_max}= | Set Variable | 9000000 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | 14880952 +| | ${threshold}= | Set Variable | 5000 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B +| | ... | frames by using binary search with threshold 5,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${binary_min}= | Set Variable | 8000000 +| | ${binary_max}= | Set Variable | 10000000 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | 14880952 +| | ${threshold}= | Set Variable | 5000 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4 +| | ... | ${min_rate} | ${max_rate} +| | ... | ${threshold} diff --git a/tests/suites/performance/long_xconnect.robot b/tests/suites/performance/long_xconnect.robot index fab92e6b54..bc191bdb2e 100644 --- a/tests/suites/performance/long_xconnect.robot +++ b/tests/suites/performance/long_xconnect.robot @@ -34,7 +34,6 @@ | | ... | Find throughput with non drop rate for 64B frames by using | | ... | linear search starting at 5Mpps, stepping down with step of 0.1Mpps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 4800000 | | ${step_rate}= | Set Variable | 100000 @@ -42,7 +41,6 @@ | | ${max_rate}= | Set Variable | 14880952 | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} @@ -52,16 +50,13 @@ | | ... | Find throughput with non drop rate for 1518B frames by using | | ... | linear search starting at 812,743pps, stepping down with step of 10,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${start_rate}= | Set Variable | 812743 | | ${step_rate}= | Set Variable | 10000 | | ${min_rate}= | Set Variable | 10000 | | ${max_rate}= | Set Variable | 812743 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} @@ -71,16 +66,13 @@ | | ... | Find throughput with non drop rate for 9000B frames by using | | ... | linear search starting at 138,580pps, stepping down with step 5,000pps | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${start_rate}= | Set Variable | 138580 | | ${step_rate}= | Set Variable | 5000 | | ${min_rate}= | Set Variable | 5000 | | ${max_rate}= | Set Variable | 138580 -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} @@ -90,16 +82,47 @@ | | ... | Find throughput on 2 cores with non drop rate for 64B frames by using | | ... | linear search starting at 8.2Mpps, stepping down with step of 0.1Mpps | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 12000000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Linear search +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by +| | ... | using linear search starting at 812,743pps, stepping down with step +| | ... | of 10,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by +| | ... | using linear search starting at 138,580pps, stepping down with step +| | ... | of 5,000pps +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} @@ -107,20 +130,50 @@ | Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through L2 cross connect in 3-node topology | | [Documentation] | | ... | Find throughput on 4 cores and rss 2 with non drop rate for 64B -| | ... | frames by using linear search starting at 8.2Mpps, stepping down +| | ... | frames by using linear search starting at 12.2Mpps, stepping down | | ... | with step of 0.1Mpps | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${start_rate}= | Set Variable | 12200000 | | ${step_rate}= | Set Variable | 100000 | | ${min_rate}= | Set Variable | 100000 | | ${max_rate}= | Set Variable | 14880952 -| | # VPP setup | | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Linear search | | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} | | ... | ${step_rate} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B +| | ... | frames by using linear search starting at 812,743pps, stepping down +| | ... | with step of 10,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B frames by +| | ... | using linear search starting at 138,580pps, stepping down with step +| | ... | of 5,000pps +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} diff --git a/tests/suites/performance/short_bridge_domain.robot b/tests/suites/performance/short_bridge_domain.robot index 27671c1259..81ba0319d8 100644 --- a/tests/suites/performance/short_bridge_domain.robot +++ b/tests/suites/performance/short_bridge_domain.robot @@ -22,19 +22,16 @@ | Documentation | Minimal throughput acceptance test cases *** Test Cases *** -| 1core VPP passes 64B frames through bridge domain at 2x 3.5Mpps in 3-node topology +| 1core VPP passes 64B frames through bridge domain at 2x 3.2Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through bridge domain -| | ... | at 2x3.5Mpps in 3-node topology +| | ... | at 2x3.2Mpps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 3.5mpps -| | # VPP setup +| | ${rate}= | Set Variable | 3.2mpps | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge @@ -43,14 +40,11 @@ | | ... | VPP with 1 core should pass 1518B frames through bridge domain | | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge @@ -59,45 +53,88 @@ | | ... | VPP with 1 core should pass 9000B frames through bridge domain | | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge -| 2core VPP with rss 1 passes 64B frames through bridge domain at 2x 7.6Mpps in 3-node topology +| 2core VPP with rss 1 passes 64B frames through bridge domain at 2x 6.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through bridge domain -| | ... | at 2x7.6Mpps in 3-node topology +| | ... | at 2x6.9Mpps in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 7.6mpps -| | # VPP setup +| | ${rate}= | Set Variable | 6.9mpps | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge -| 4core VPP with rss 2 passes 64B frames through bridge domain at 2x 8.6Mpps in 3-node topology +| 2core VPP with rss 1 passes 1518B frames through bridge domain at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 1518B frames through bridge domain +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge + +| 2core VPP with rss 1 passes 9000B frames through bridge domain at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 9000B frames through bridge domain +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge + +| 4core VPP with rss 2 passes 64B frames through bridge domain at 2x 7.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through bridge -| | ... | domain at 2x8.6Mpps in 3-node topology +| | ... | domain at 2x7.9Mpps in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 8.6mpps -| | # VPP setup +| | ${rate}= | Set Variable | 7.9mpps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge + +| 4core VPP with rss 2 passes 1518B frames through bridge domain at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through bridge +| | ... | domain at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge + +| 4core VPP with rss 2 passes 9000B frames through bridge domain at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2should pass 9000B frames through bridge +| | ... | domain at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps | | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND L2 bridge domain initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-bridge diff --git a/tests/suites/performance/short_ipv4.robot b/tests/suites/performance/short_ipv4.robot index f96623beb6..549bb0adf4 100644 --- a/tests/suites/performance/short_ipv4.robot +++ b/tests/suites/performance/short_ipv4.robot @@ -26,82 +26,119 @@ | Documentation | Minimal throughput acceptance test cases *** Test Cases *** -| 1core VPP passes 64B frames through IPv4 forwarding at 2x 3.5mpps in 3-node topology +| 1core VPP passes 64B frames through IPv4 forwarding at 2x 3.5Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through IPv4 forwarding -| | ... | at 2x3.5mpps in 3-node topology +| | ... | at 2x3.5Mpps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-IPv4 -| 1core VPP passes 1518B frames through IPv4 forwarding at 2x 10gbps in 3-node topology +| 1core VPP passes 1518B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through IPv4 forwarding -| | ... | at 2x10gbps in 3-node topology +| | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-IPv4 -| 1core VPP passes 9000B frames through IPv4 forwarding at 2x 10gbps in 3-node topology +| 1core VPP passes 9000B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through IPv4 forwarding -| | ... | at 2x10gbps in 3-node topology +| | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-IPv4 -| 2core VPP with rss 1 passes 64B frames through IPv4 forwarding at 2x 8.2mpps in 3-node topology +| 2core VPP with rss 1 passes 64B frames through IPv4 forwarding at 2x 7.5Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through IPv4 forwarding -| | ... | at 2x8.2mpps in 3-node topology +| | ... | at 2x7.5Mpps in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 8.2mpps -| | # VPP setup +| | ${rate}= | Set Variable | 7.5mpps | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-IPv4 -| 4core VPP with rss 2 passes 64B frames through IPv4 forwarding at 2x 9.2mpps in 3-node topology +| 2core VPP with rss 1 passes 1518B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 1518B frames through IPv4 forwarding +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 2core VPP with rss 1 passes 9000B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 9000B frames through IPv4 forwarding +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 64B frames through IPv4 forwarding at 2x 7.8Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through IPv4 -| | ... | forwarding at 2x9.2mpps in 3-node topology +| | ... | forwarding at 2x7.8Mpps in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 9.2mpps -| | # VPP setup -| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | ${rate}= | Set Variable | 7.8mpps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 1518B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through IPv4 +| | ... | forwarding at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 + +| 4core VPP with rss 2 passes 9000B frames through IPv4 forwarding at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 9000B frames through IPv4 +| | ... | forwarding at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND IPv4 forwarding initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/suites/performance/short_xconnect.robot b/tests/suites/performance/short_xconnect.robot index a909e8b8e7..25eef3f65c 100644 --- a/tests/suites/performance/short_xconnect.robot +++ b/tests/suites/performance/short_xconnect.robot @@ -23,83 +23,119 @@ | Documentation | Minimal throughput acceptance test cases *** Test Cases *** -| 1core VPP passes 64B frames through L2 cross connect at 2x 3.5mpps in 3-node topology +| 1core VPP passes 64B frames through L2 cross connect at 2x 3.8Mpps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 64B frames through L2 cross connect -| | ... | at 2x3.5mpps in 3-node topology +| | ... | at 2x3.8Mpps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 3.5mpps -| | # VPP setup +| | ${rate}= | Set Variable | 3.8mpps | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-xconnect -| 1core VPP passes 1518B frames through L2 cross connect at 2x 10gbps in 3-node topology +| 1core VPP passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 1518B frames through L2 cross connect -| | ... | at 2x10gbps in 3-node topology +| | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 1518 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-xconnect -| 1core VPP passes 9000B frames through L2 cross connect at 2x 10gbps in 3-node topology +| 1core VPP passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology | | [Documentation] | | ... | VPP with 1 core should pass 9000B frames through L2 cross connect -| | ... | at 2x10gbps in 3-node topology +| | ... | at 2x10Gbps in 3-node topology | | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD -| | # Variables | | ${framesize}= | Set Variable | 9000 | | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10gbps -| | # VPP setup | | Given Setup '1' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-xconnect -| 2core VPP with rss 1 passes 64B frames through L2 cross connect at 2x 11.0mpps in 3-node topology +| 2core VPP with rss 1 passes 64B frames through L2 cross connect at 2x 8.3Mpps in 3-node topology | | [Documentation] | | ... | VPP with 2 cores should pass 64B frames through L2 cross connect -| | ... | at 2x11.0mpps in 3-node topology +| | ... | at 2x8.3Mpps in 3-node topology | | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD -| | # Variables | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 11.0mpps -| | # VPP setup +| | ${rate}= | Set Variable | 8.3mpps | | Given Setup '2' worker threads and rss '1' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-xconnect -| 4core VPP with rss 2 passes 64B frames through L2 cross connect at 2x 11.6mpps in 3-node topology +| 2core VPP with rss 1 passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 1518B frames through L2 cross connect +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect + +| 2core VPP with rss 1 passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 2 cores should pass 9000B frames through L2 cross connect +| | ... | at 2x10Gbps in 3-node topology +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect + +| 4core VPP with rss 2 passes 64B frames through L2 cross connect at 2x 9.9Mpps in 3-node topology | | [Documentation] | | ... | VPP with 4 cores and rss 2 should pass 64B frames through L2 cross -| | ... | connect at 2x11.6mpps in 3-node topology -| | # Variables +| | ... | connect at 2x9.9Mpps in 3-node topology | | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | | ${framesize}= | Set Variable | 64 | | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 11.6mpps -| | # VPP setup +| | ${rate}= | Set Variable | 9.9mpps | | Given Setup '4' worker threads and rss '2' without HTT on all DUTs | | AND L2 xconnect initialized in a 3-node circular topology -| | # Sent traffic with specified rate | | Then Traffic should pass with no loss | ${duration} | ${rate} | | ... | ${framesize} | 3-node-xconnect +| 4core VPP with rss 2 passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through L2 cross +| | ... | connect at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect + +| 4core VPP with rss 2 passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology +| | [Documentation] +| | ... | VPP with 4 cores and rss 2 should pass 9000B frames through L2 cross +| | ... | connect at 2x10Gbps in 3-node topology +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${duration}= | Set Variable | 10 +| | ${rate}= | Set Variable | 10gbps +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | AND L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect |