diff options
53 files changed, 119 insertions, 170 deletions
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index d45adc6cf9..9a1de5cc77 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -87,8 +87,8 @@ | | ... | using PLRsearch algorithm. | | ... | Display results as formatted test message. | | ... | Fail if computed lower bound is 110% of the minimal rate or less. -| | ... | Input rates are understood as uni-directional, -| | ... | reported result contains aggregate rates. +| | ... | Input rates are unidirectional, in transaction per second. +| | ... | Reported result may contain aggregate pps rates, depending on test. | | ... | Currently, the min_rate value is hardcoded to match test teardowns. | | ... | Call \${resetter} (if defined) to reset DUT state before each trial. | | @@ -143,8 +143,8 @@ | | ... | using an optimized search algorithm. | | ... | Display findings as a formatted test message. | | ... | Fail if a resulting lower bound has too high loss fraction. -| | ... | Input rates are understood as uni-directional, -| | ... | reported result contains aggregate rates. +| | ... | Input rates are unidirectional, in transaction per second. +| | ... | Reported result may contain aggregate pps rates, depending on test. | | ... | Additional latency measurements are performed for smaller loads, | | ... | even if latency stream is disabled in search. Their results | | ... | are also displayed. @@ -159,7 +159,7 @@ | | ... | Type: string | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or | | ... | string -| | ... | - max_rate - Calculated maximal transmit rate [tps]. +| | ... | - max_rate - Calculated maximal unidirectional transmit rate [tps]. | | ... | Type: float | | ... | - resetter - Callable to reset DUT state before each trial. | | ... | - transaction_scale - Number of ASTF transaction (zero if unlimited). @@ -236,8 +236,8 @@ | Find Throughput Using MLRsearch | | [Documentation] | | ... | Find and return lower bound NDR (zero PLR) -| | ... | aggregate throughput using MLRsearch algorithm. -| | ... | Input rates are understood as uni-directional. +| | ... | throughput using MLRsearch algorithm. +| | ... | Input and output rates are understood as uni-directional, in tps. | | ... | Currently, the min_rate value is hardcoded to match test teardowns. | | ... | Call \${resetter} (if defined) to reset DUT state before each trial. | | @@ -246,7 +246,7 @@ | | ... | Type: string | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or | | ... | string -| | ... | - max_rate - Calculated maximal transmit rate [tps]. +| | ... | - max_rate - Calculated maximal unidirectional transmit rate [tps]. | | ... | Type: float | | ... | - resetter - Callable to reset DUT state before each trial. | | ... | - transaction_scale - Number of ASTF transaction (zero if unlimited). @@ -254,7 +254,8 @@ | | ... | transactions. Default is "packet". | | | | ... | *Returns:* -| | ... | - Lower bound for bi-directional throughput at given PLR. Type: float +| | ... | - Lower bound for uni-directional tps throughput at given PLR. +| | ... | Type: float | | | | ... | *Example:* | | @@ -296,13 +297,13 @@ | | [Documentation] | | ... | Send traffic at specified rate, single trial. | | ... | Extract latency information and append it to text message. -| | ... | The rate argument is int, so should not include "pps". +| | ... | The rate argument is float, so should not include "pps". | | ... | If the given rate is too low, a safe value is used instead. | | ... | Call \${resetter} (if defined) to reset DUT state before each trial. | | | | ... | *Arguments:* | | ... | - message_prefix - Preface to test message addition. Type: string -| | ... | - rate - Rate [tps] for sending packets. +| | ... | - rate - Unidirectional rate [tps] for sending packets. | | ... | Type: float | | | | ... | *Example:* @@ -352,7 +353,7 @@ | | ... | string | | ... | - ramp_up_duration - Suitable traffic duration [s]. | | ... | Type: float -| | ... | - ramp_up_rate - Suitable transmit rate [tps]. +| | ... | - ramp_up_rate - Suitable unidirectional transmit rate [tps]. | | ... | Type: float | | ... | - transaction_type - String identifier to determine how to count | | ... | transactions. Default is "packet". @@ -394,7 +395,7 @@ | | | | ... | *Arguments:* | | ... | - trial_duration - Duration of single trial [s]. Type: float -| | ... | - rate - Target transmit rate [tps]. Type: float +| | ... | - rate - Target unidirectional transmit rate [tps]. Type: float | | ... | Type: string | | ... | - trial_multiplicity - How many trials in this measurement. | | ... | Type: boolean @@ -614,7 +615,7 @@ | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or | | ... | string | | ... | *Arguments:* -| | ... | - rate - Rate [tps] for sending packets. +| | ... | - rate - Unidirectional rate [tps] for sending packets. | | ... | Type: float | | | | ... | *Example:* diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index 71f05cc075..2bc7109a29 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 35c3e5a7e8..cb7b0a826d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 6bd4e5f9ad..c320ccf12f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 079378099b..255987a36a 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec10000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index 00e0bd7155..fa2759b125 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index d2616a9f9c..3c2cfa709b 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 729c4ae8ca..349b658fc8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index bc2dada640..07297acce9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index e802692e61..8ab6dcbad9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index d5e3a0f22f..6b9ae46358 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 1a24c6a3f1..e32456cc76 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index d0c235ee99..d21b2c5d62 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec1tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index c712e49fa2..51fc3ee8bd 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 9f6eda436b..159f13665e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 6fee5fb803..5a9f776673 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index ba0b6bcf24..8d94e9c013 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec20000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index 18ea04a2e9..4b91d695d8 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 83b8746530..25944d3034 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 5d21180735..cadb95b367 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index e4cfe4d478..2f62543011 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index 2e234745bc..89c9ab0c59 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index bbdb57f9f7..62830afa77 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index aa27e1c337..38789a2f21 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 08da271ac3..27bf36865f 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec400tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index b387a4e131..46bc84cbe2 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 1d89410bf9..ae327080f0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 97a7842348..f8809f9b0c 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 368c758924..4567c86986 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec40tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index 2c16245e9f..73be86c935 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 122e24e699..784ae849df 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index f2c4319287..70842d431e 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 39752a9b12..6c647c8217 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec4tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index ab49221762..1610c41f2d 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index 6d76d08d8c..2853c7f895 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index d009ad6f23..24ef76b8e9 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index a5a15da372..748b2c1591 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec5000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot index fbfb631984..3c91b4bddd 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac256sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot index f3569b8d46..8ed3fd67d0 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128cbc-hmac512sha-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -109,8 +109,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot index 08fba2fa13..982cb061a3 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes128gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot index 6afea0d023..f1e1c3bb28 100644 --- a/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot +++ b/tests/vpp/perf/crypto/10ge2p1x710-ethip4ipsec60000tnlsw-1atnl-ip4base-int-aes256gcm-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -110,8 +110,7 @@ | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] | | ... | ${DUT2_${int}1}[0] | ${n_tunnels} | ${encr_alg} | ${auth_alg} | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And VPP IPsec Create Tunnel Interfaces | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2}[0] diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot index eb3abb300c..a0a8f3cf84 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot index 01886d9f67..18ef575b1e 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-10ch-1ach-20vh-10vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot index adf9dbc0f7..a73d74aac5 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot index 7319d68ba4..daaf0601b9 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-1ch-1ach-2vh-1vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot index 697e5fecee..55b6d99707 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot index fe93ae2b99..fb9882e499 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-2ch-1ach-4vh-2vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot index fb4ec99418..9aaba04b66 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot index cbcccfc194..67f7b00574 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-4ch-1ach-8vh-4vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot index 8d21fee2f0..58a2908a3f 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot index f907f807a3..5d9ea7cdfb 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-6ch-1ach-12vh-6vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot index 8f82411342..c5c0816eee 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm1t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} diff --git a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot index d34c71d5c0..fd26e1f452 100644 --- a/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot +++ b/tests/vpp/perf/nfv_density/vm_vhost/chain_dot1qip4vxlan/2n-10ge2p1x710-dot1qip4vxlan-l2bd-8ch-1ach-16vh-8vm2t-testpmd-reconf.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. +# Copyright (c) 2021 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -105,8 +105,7 @@ | | And Configure chains of NFs connected via vhost-user | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo} | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=testpmd_io -| | ${bidirectional_throughput}= | Find Throughput Using MLRsearch -| | ${unidirectional_throughput}= | Evaluate | ${bidirectional_throughput} / 2.0 +| | ${unidirectional_throughput} = | Find Throughput Using MLRsearch | | Start Traffic on Background | ${unidirectional_throughput} | | And Initialize layer dot1q | | ... | count=${nf_total_chains} | vlan_per_chain=${False} |