diff options
5 files changed, 281 insertions, 160 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 7db6577095..0b7eafa761 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -236,30 +236,30 @@ | | ${dut2_vif2}= | Set Variable | ${dut2_vhost_if2} | | Set Interface State | ${dut2} | ${dut2_vif1} | up | | Set Interface State | ${dut2} | ${dut2_vif2} | up -| | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif1} -| | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif2} -| | ${dut1_if1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if1} -| | ${dut1_if2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if2} -| | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif1} -| | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif2} -| | ${dut2_if1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if1} -| | ${dut2_if2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if2} -| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} -| | ... | via 4.4.4.2 sw_if_index ${dut1_vif1_idx} multipath -| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_1} -| | ... | via 1.1.1.2 sw_if_index ${dut1_if1_idx} multipath -| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_2} -| | ... | via 2.2.2.2 sw_if_index ${dut1_if2_idx} multipath -| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} -| | ... | via 5.5.5.2 sw_if_index ${dut1_vif2_idx} multipath -| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_1} -| | ... | via 2.2.2.1 sw_if_index ${dut2_if1_idx} multipath -| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} -| | ... | via 4.4.4.1 sw_if_index ${dut2_vif1_idx} multipath -| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} -| | ... | via 5.5.5.2 sw_if_index ${dut2_vif2_idx} multipath -| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_2} -| | ... | via 3.3.3.2 sw_if_index ${dut2_if2_idx} multipath +| | Add Fib Table | ${dut1} | ${fib_table_1} +| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE} +| | Add Fib Table | ${dut1} | ${fib_table_1} +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | Add Fib Table | ${dut1} | ${fib_table_2} +| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | Add Fib Table | ${dut1} | ${fib_table_2} +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_1} +| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_1} +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_2} +| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_2} +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} @@ -280,6 +280,10 @@ | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif1} +| | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_vif2} +| | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif1} +| | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_vif2} | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} | | ... | ${dut1_vif1_idx} | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} @@ -347,18 +351,18 @@ | | Set interfaces in path in 3-node circular topology up | | ${fib_table_1}= | Set Variable | ${101} | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr} -| | ${dut1_if1_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if1} -| | ${dut1_if2_idx}= | Get Interface SW Index | ${dut1} | ${dut1_if2} -| | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_1} -| | ... | via 1.1.1.2 sw_if_index ${dut1_if1_idx} multipath -| | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_2} -| | ... | via 2.2.2.2 sw_if_index ${dut1_if2_idx} multipath -| | ${dut2_if1_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if1} -| | ${dut2_if2_idx}= | Get Interface SW Index | ${dut2} | ${dut2_if2} -| | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_1} -| | ... | via 2.2.2.1 sw_if_index ${dut2_if1_idx} multipath -| | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_2} -| | ... | via 3.3.3.2 sw_if_index ${dut2_if2_idx} multipath +| | Add Fib Table | ${dut1} | ${fib_table_1} +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE} +| | Add Fib Table | ${dut1} | ${fib_table_2} +| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_1} +| | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1} +| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE} +| | Add Fib Table | ${dut2} | ${fib_table_2} +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2} +| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1} @@ -400,27 +404,27 @@ | | | ... | dut1-vhost-${number}-if2 | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up | | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up -| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if1} -| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} -| | | ... | ${dut1-vhost-${number}-if2} | | | Configure vhost interfaces for L2BD forwarding | ${dut2} | | | ... | ${sock1} | ${sock2} | dut2-vhost-${number}-if1 | | | ... | dut2-vhost-${number}-if2 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if1} | up | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up -| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if1} -| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} -| | | ... | ${dut2-vhost-${number}-if2} -| | | Add fib table | ${dut1} | 20.20.20.0 | 24 | ${fib_table_1} -| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut1_vif1_idx} multipath -| | | Add fib table | ${dut1} | 10.10.10.0 | 24 | ${fib_table_2} -| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut1_vif2_idx} multipath -| | | Add fib table | ${dut2} | 20.20.20.0 | 24 | ${fib_table_1} -| | | ... | via ${ip_net_vif1}.1 sw_if_index ${dut2_vif1_idx} multipath -| | | Add fib table | ${dut2} | 10.10.10.0 | 24 | ${fib_table_2} -| | | ... | via ${ip_net_vif2}.2 sw_if_index ${dut2_vif2_idx} multipath +| | | Add Fib Table | ${dut1} | ${fib_table_1} +| | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1_vif1} +| | | ... | multipath=${TRUE} +| | | Add Fib Table | ${dut1} | ${fib_table_2} +| | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1_vif2} +| | | ... | multipath=${TRUE} +| | | Add Fib Table | ${dut2} | ${fib_table_1} +| | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1} +| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2_vif1} +| | | ... | multipath=${TRUE} +| | | Add Fib Table | ${dut2} | ${fib_table_2} +| | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2} +| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2_vif2} +| | | ... | multipath=${TRUE} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} | | | ... | ${fib_table_1} | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} @@ -434,6 +438,14 @@ | | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 | | | ... | ${dut2} | ${dut2-vhost-${number}-if1} | ${ip_net_vif1}.1 | 30 | | | ... | ${dut2} | ${dut2-vhost-${number}-if2} | ${ip_net_vif2}.1 | 30 +| | | ${dut1_vif1_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if1} +| | | ${dut1_vif2_idx}= | Get Interface SW Index | ${dut1} +| | | ... | ${dut1-vhost-${number}-if2} +| | | ${dut2_vif1_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if1} +| | | ${dut2_vif2_idx}= | Get Interface SW Index | ${dut2} +| | | ... | ${dut2-vhost-${number}-if2} | | | ${dut1_vif1_mac}= | Get Vhost User Mac By Sw Index | ${dut1} | | | ... | ${dut1_vif1_idx} | | | ${dut1_vif2_mac}= | Get Vhost User Mac By Sw Index | ${dut1} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot index 5dc941725f..8d88399a3e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot @@ -69,8 +69,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -92,8 +94,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -114,8 +118,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -137,8 +143,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -160,8 +168,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -182,8 +192,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -205,8 +217,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -228,8 +242,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -250,8 +266,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot index 2afbb093c8..b7203795e2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot @@ -79,8 +79,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -107,8 +109,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -136,8 +140,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -164,8 +170,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -192,8 +200,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -219,8 +229,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -248,8 +260,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -276,8 +290,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -305,8 +321,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -333,8 +351,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -361,8 +381,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -388,8 +410,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -407,6 +431,7 @@ | | ... | step 100kpps. | | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC | | ${framesize}= | Set Variable | ${64} +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local | | ${min_rate}= | Set Variable | ${100000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} @@ -417,8 +442,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -445,8 +472,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -474,8 +503,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -502,8 +533,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -530,8 +563,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -557,8 +592,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv4 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And Add Fib Table | ${dut1} | 1 +| | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot index c619b6530b..90b5d9567a 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot @@ -65,8 +65,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -88,8 +90,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -110,8 +114,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -133,8 +139,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -156,8 +164,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -178,8 +188,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -201,8 +213,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -224,8 +238,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -246,8 +262,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot index 6808603262..5fb9c472cf 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot @@ -75,8 +75,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -103,8 +105,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -132,8 +136,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -160,8 +166,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -188,8 +196,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -215,8 +225,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -244,8 +256,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -272,8 +286,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -301,8 +317,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -329,8 +347,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -357,8 +377,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -384,8 +406,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -413,8 +437,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -441,8 +467,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -470,8 +498,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -498,8 +528,10 @@ | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -526,8 +558,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable @@ -553,8 +587,10 @@ | | And Add PCI devices to DUTs in 3-node single link topology | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE} +| | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE} +| | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE} | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable |