diff options
13 files changed, 516 insertions, 62 deletions
diff --git a/docs/report/vpp_performance_tests/containers.rst b/docs/report/vpp_performance_tests/containers.rst index 8fd03207d8..d3eeb71b0b 100644 --- a/docs/report/vpp_performance_tests/containers.rst +++ b/docs/report/vpp_performance_tests/containers.rst @@ -535,10 +535,10 @@ Following container networking topologies are tested in CSIT |release|: - Kubernetes/Ligato topologies: - - eth-l2xcbase-eth-2memif-1vnf. - - eth-l2xcbase-eth-4memif-2vnf. - - eth-l2bdbasemaclrn-eth-2memif-1vnf. - - eth-l2bdbasemaclrn-eth-4memif-2vnf. + - eth-1drcl2xcbase-eth-2memif-1drcl2xc. + - eth-1drcl2xcbase-eth-4memif-2drcl2xc. + - eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc. + - eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc. References diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst new file mode 100644 index 0000000000..3ac7da60a4 --- /dev/null +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_memif.rst @@ -0,0 +1,74 @@ +Container memif Connections +=========================== + +This section includes summary graphs of VPP Phy-to-Phy packet latency +with Container memif Connections measured at 50% of discovered NDR throughput +rate. Latency is reported for VPP running in multiple configurations of +VPP worker thread(s), a.k.a. VPP data plane thread(s), and their +physical CPU core(s) placement. + +VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-ndrdisc-lat50.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-ndrdisc-lat50} + \label{fig:64B-1t1c-container_memif-ndrdisc-lat50} + \end{figure} + +*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + +VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-ndrdisc-lat50.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-ndrdisc-lat50} + \label{fig:64B-2t2c-container_memif-ndrdisc-lat50} + \end{figure} + +*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst new file mode 100644 index 0000000000..fd3cd3423d --- /dev/null +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/container_orchestrated.rst @@ -0,0 +1,74 @@ +Container Orchestrated Topologies +================================= + +This section includes summary graphs of VPP Phy-to-Phy packet latency +with CContainer Orchestrated Topologies measured at 50% of discovered NDR +throughput rate. Latency is reported for VPP running in multiple configurations +of VPP worker thread(s), a.k.a. VPP data plane thread(s), and their +physical CPU core(s) placement. + +VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-ndrdisc-lat50.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-ndrdisc-lat50} + \label{fig:64B-1t1c-container_orchestrated-ndrdisc-lat50} + \end{figure} + +*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + +VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-ndrdisc-lat50.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-ndrdisc-lat50} + \label{fig:64B-2t2c-container_orchestrated-ndrdisc-lat50} + \end{figure} + +*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst index 7db10ee0cd..c42b4c9325 100644 --- a/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst +++ b/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst @@ -30,4 +30,6 @@ TGint2-to-SUT2-to-SUT1-to-TGint1. ip4_tunnels ip6_tunnels vm_vhost + container_memif + container_orchestrated ipsec diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst new file mode 100644 index 0000000000..8c26762fcf --- /dev/null +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_memif.rst @@ -0,0 +1,151 @@ +Container memif Connections +=========================== + +Following sections include summary graphs of VPP Phy-to-Phy performance +with Container memif Connections, including NDR throughput (zero packet loss) +and PDR throughput (<0.5% packet loss). Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +~~~~~~~~~~~~~~ + +VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented +in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-ndrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-ndrdisc} + \label{fig:64B-1t1c-container_memif-ndrdisc} + \end{figure} + +*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + +VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented +in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-ndrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-ndrdisc} + \label{fig:64B-2t2c-container_memif-ndrdisc} + \end{figure} + +*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + + +PDR Throughput +~~~~~~~~~~~~~~ + +VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented +in the graph below. PDR measured for 0.5% packet loss ratio. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_memif-pdrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_memif-pdrdisc} + \label{fig:64B-1t1c-container_memif-pdrdisc} + \end{figure} + +*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + +VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented +in the graph below. PDR measured for 0.5% packet loss ratio. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_memif-pdrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_memif-pdrdisc} + \label{fig:64B-2t2c-container_memif-pdrdisc} + \end{figure} + +*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/vpp/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst new file mode 100644 index 0000000000..f9601c032a --- /dev/null +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/container_orchestrated.rst @@ -0,0 +1,151 @@ +Container Orchestrated Topologies +================================= + +Following sections include summary graphs of VPP Phy-to-Phy performance +with Container Orchestrated Topologies, including NDR throughput (zero packet +loss) and PDR throughput (<0.5% packet loss). Performance is reported for VPP +running in multiple configurations of VPP worker thread(s), a.k.a. VPP +data plane thread(s), and their physical CPU core(s) placement. + +NDR Throughput +~~~~~~~~~~~~~~ + +VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented +in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-ndrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-ndrdisc} + \label{fig:64B-1t1c-container_orchestrated-ndrdisc} + \end{figure} + +*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + +VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented +in the graph below. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-ndrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-ndrdisc} + \label{fig:64B-2t2c-container_orchestrated-ndrdisc} + \end{figure} + +*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*ndrdisc" * + + +PDR Throughput +~~~~~~~~~~~~~~ + +VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented +in the graph below. PDR measured for 0.5% packet loss ratio. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-container_orchestrated-pdrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-container_orchestrated-pdrdisc} + \label{fig:64B-1t1c-container_orchestrated-pdrdisc} + \end{figure} + +*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + +VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented +in the graph below. PDR measured for 0.5% packet loss ratio. + +.. raw:: html + + <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-container_orchestrated-pdrdisc.html"></iframe> + +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-container_orchestrated-pdrdisc} + \label{fig:64B-2t2c-container_orchestrated-pdrdisc} + \end{figure} + +*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet +Switching (base).* + +CSIT source code for the test cases used for above plots can be found in CSIT +git repository: + +.. only:: html + + .. program-output:: cd ../../../../../ && set -x && cd tests/kubernetes/perf/container_memif && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/kubernetes/perf/container_memif + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-[1-9]drc(l2xcbase|l2bdbasemaclrn)-.*pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/index.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/index.rst index 91191ef412..7c2a1a9e26 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/index.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/index.rst @@ -42,4 +42,6 @@ and their indices. ip4_tunnels ip6_tunnels vm_vhost + container_memif + container_orchestrated ipsec diff --git a/resources/templates/kubernetes/eth-1drcl2bdbase-eth-2memif-1drcl2xc.yaml b/resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc.yaml index 726e9734ab..726e9734ab 100644 --- a/resources/templates/kubernetes/eth-1drcl2bdbase-eth-2memif-1drcl2xc.yaml +++ b/resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc.yaml diff --git a/resources/templates/kubernetes/eth-1drcl2bdbase-eth-4memif-2drcl2xc.yaml b/resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc.yaml index 5bf290d0ee..5bf290d0ee 100644 --- a/resources/templates/kubernetes/eth-1drcl2bdbase-eth-4memif-2drcl2xc.yaml +++ b/resources/templates/kubernetes/eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc.yaml diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot index c1eb97ba3f..c5ed51334b 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot @@ -62,7 +62,7 @@ # X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} # Kubernetes profile -| ${kubernetes_profile} | eth-1drcl2bdbase-eth-2memif-1drcl2xc +| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc # Traffic profile: | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 # CPU settings @@ -166,7 +166,7 @@ | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** -| tc01-64B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -177,18 +177,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR -| tc02-64B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR -| tc03-IMIX-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -200,7 +200,7 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR -| tc04-IMIX-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -208,11 +208,11 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR -| tc05-1518B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -223,18 +223,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR -| tc06-1518B-1t1c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR -| tc07-64B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. @@ -245,18 +245,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR -| tc08-64B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR -| tc09-IMIX-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. @@ -264,11 +264,11 @@ | | ... | linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR -| tc10-IMIX-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -276,28 +276,28 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR -| tc11-1518B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-ndrdisc +| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR -| tc12-1518B-2t2c-eth-1dcrl2bdbase-eth-2memif-1drcl2xc-k8s-pdrdisc +| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot index c7f20ec1f9..ace97fe2cc 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot @@ -62,7 +62,7 @@ # X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} # Kubernetes profile -| ${kubernetes_profile} | eth-1drcl2bdbase-eth-4memif-2drcl2xc +| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc # Traffic profile: | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 # CPU settings @@ -169,7 +169,7 @@ | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** -| tc01-64B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -180,18 +180,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR -| tc02-64B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR -| tc03-IMIX-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -203,7 +203,7 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR -| tc04-IMIX-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -211,11 +211,11 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR -| tc05-1518B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -226,18 +226,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR -| tc06-1518B-1t1c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR -| tc07-64B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. @@ -248,18 +248,18 @@ | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR -| tc08-64B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR -| tc09-IMIX-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\ | | ... | 1 receive queue per NIC port. @@ -267,11 +267,11 @@ | | ... | linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR -| tc10-IMIX-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -279,28 +279,28 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR -| tc11-1518B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-ndrdisc +| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR -| tc12-1518B-2t2c-eth-1drcl2bdbase-eth-4memif-2drcl2xc-k8s-pdrdisc +| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\ | | ... | 1 receive queue per NIC port. | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot index a0178dae7c..038cb165df 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot @@ -184,7 +184,7 @@ | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR @@ -208,7 +208,7 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR @@ -230,7 +230,7 @@ | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR @@ -252,7 +252,7 @@ | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR @@ -264,7 +264,7 @@ | | ... | linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR @@ -276,7 +276,7 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR @@ -287,7 +287,7 @@ | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR @@ -298,6 +298,6 @@ | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot index 8cdea90640..e10d21ca3a 100644 --- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot +++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot @@ -187,7 +187,7 @@ | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR @@ -211,7 +211,7 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC +| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR @@ -233,7 +233,7 @@ | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC +| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR @@ -255,7 +255,7 @@ | | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ | | ... | linerate, step 100kpps, LT=0.5%. | | ... -| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR @@ -267,7 +267,7 @@ | | ... | linerate, step 10kpps. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR @@ -279,7 +279,7 @@ | | ... | linerate, step 10kpps, LT=0.5%. | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | ... -| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC +| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR @@ -290,7 +290,7 @@ | | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR @@ -301,6 +301,6 @@ | | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ | | ... | linerate, step 10kpps, LT=0.5%. | | ... -| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC +| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH | | [Template] | L2 Cross Connect Binary Search | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR |