diff options
17 files changed, 1891 insertions, 47 deletions
diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst index 7d458c2924..4edcaac526 100644 --- a/docs/tag_documentation.rst +++ b/docs/tag_documentation.rst @@ -289,6 +289,10 @@ Feature tags COP whitelist. +.. topic:: SNAT + + SNAT configured and tested. + Encryption tags --------------- diff --git a/resources/libraries/python/SNATUtil.py b/resources/libraries/python/SNATUtil.py new file mode 100644 index 0000000000..02cf493a93 --- /dev/null +++ b/resources/libraries/python/SNATUtil.py @@ -0,0 +1,171 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""SNAT utilities library.""" + +from resources.libraries.python.VatExecutor import VatTerminal + + +class SNATUtil(object): + """This class defines the methods to set SNAT.""" + + def __init__(self): + pass + + @staticmethod + def set_snat_interfaces(node, int_in, int_out): + """Set inside and outside interfaces for SNAT. + + :param node: DUT node. + :param int_in: Inside interface. + :param int_out: Outside interface. + :type node: dict + :type int_in: str + :type int_out: str + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If setting of inside and outside interfaces for + SNAT fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_set_interfaces.vat', + int_in=int_in, int_out=int_out) + return response + except: + raise RuntimeError("Setting of inside and outside interfaces for " + "SNAT failed!") + + @staticmethod + def set_snat_deterministic(node, ip_in, subnet_in, ip_out, subnet_out): + """Set deterministic behaviour of SNAT. + + :param node: DUT node. + :param ip_in: Inside IP. + :param subnet_in: Inside IP subnet. + :param ip_out: Outside IP. + :param subnet_out: Outside IP subnet. + :type node: dict + :type ip_in: str + :type subnet_in: str or int + :type ip_out: str + :type subnet_out: str or int + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If setting of deterministic behaviour of SNAT + fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_set_deterministic.vat', + ip_in=ip_in, subnet_in=subnet_in, + ip_out=ip_out, subnet_out=subnet_out) + return response + except: + raise RuntimeError("Setting of deterministic behaviour of SNAT " + "failed!") + + @staticmethod + def set_snat_workers(node, lcores): + """Set SNAT workers. + + :param node: DUT node. + :param lcores: list of cores, format: range e.g. 1-5 or list of ranges + e.g.: 1-5,18-22. + :type node: dict + :type lcores: str + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If setting of SNAT workers fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_set_workers.vat', lcores=lcores) + return response + except: + raise RuntimeError("Setting of SNAT workers failed!") + + @staticmethod + def show_snat(node): + """Show the SNAT settings. + + :param node: DUT node. + :type node: dict + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If getting of SNAT settings fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_show_snat.vat') + return response + except: + raise RuntimeError("Getting of SNAT settings failed!") + + @staticmethod + def show_snat_deterministic_forward(node, ip_addr): + """Show forward IP address and port(s). + + :param node: DUT node. + :param ip_addr: IP address. + :type node: dict + :type ip_addr: str + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If command 'exec snat deterministic forward' + fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_deterministic_forward.vat', ip=ip_addr) + return response + except: + raise RuntimeError("Command 'exec snat deterministic forward {ip}'" + " failed!".format(ip=ip_addr)) + + @staticmethod + def show_snat_deterministic_reverse(node, ip_addr, port): + """Show reverse IP address. + + :param node: DUT node. + :param ip_addr: IP address. + :param port: Port. + :type node: dict + :type ip_addr: str + :type port: str or int + :returns: Response of the command. + :rtype: str + :raises RuntimeError: If command 'exec snat deterministic reverse' + fails. + """ + + try: + with VatTerminal(node, json_param=False) as vat: + response = vat.vat_terminal_exec_cmd_from_template( + 'snat/snat_deterministic_reverse.vat', + ip=ip_addr, port=port) + return response + except: + raise RuntimeError( + "Command 'exec snat deterministic reverse {ip}:{port}'" + " failed!".format(ip=ip_addr, port=port)) diff --git a/resources/libraries/python/TrafficGenerator.py b/resources/libraries/python/TrafficGenerator.py index 2313ec856b..8387ce2b3c 100644 --- a/resources/libraries/python/TrafficGenerator.py +++ b/resources/libraries/python/TrafficGenerator.py @@ -438,6 +438,161 @@ class TrafficGenerator(object): _p0, _p1, _async, _latency, warmup_time), timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-1u-1p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.0.0 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1024 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1028 " + "--p{5}_dst_end_udp_port 1028 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-1u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.0.0 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 1038 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-10u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.0.9 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 1173 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-100u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.0.99 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 2523 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration) + 60) + + elif traffic_type in ["3-node-IPv4-SNAT-1000u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.3.231 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 16023 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-2000u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.7.207 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 31022 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + + elif traffic_type in ["3-node-IPv4-SNAT-4000u-15p"]: + (ret, stdout, stderr) = ssh.exec_command( + "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " + "--duration={1} -r {2} -s {3} " + "--p{4}_src_start_ip 20.0.0.0 " + "--p{4}_src_end_ip 20.0.15.159 " + "--p{4}_dst_start_ip 12.0.0.2 " + "--p{5}_src_start_ip 12.0.0.2 " + "--p{5}_src_end_ip 12.0.0.2 " + "--p{5}_dst_start_ip 200.0.0.0 " + "--p{4}_src_start_udp_port 1024 " + "--p{4}_src_end_udp_port 1038 " + "--p{4}_dst_start_udp_port 1024 " + "--p{5}_src_start_udp_port 1024 " + "--p{5}_dst_start_udp_port 1024 " + "--p{5}_dst_end_udp_port 61022 " + "{6} {7} --warmup_time={8}'".format(Constants.REMOTE_FW_DIR, + duration, rate, framesize, + _p0, _p1, _async, _latency, + warmup_time), + timeout=int(duration)+60) + elif traffic_type in ["3-node-IPv4-dst-10000"]: (ret, stdout, stderr) = ssh.exec_command( "sh -c '{0}/resources/tools/t-rex/t-rex-stateless.py " diff --git a/resources/libraries/python/VppConfigGenerator.py b/resources/libraries/python/VppConfigGenerator.py index 267c47845f..e109d768fa 100644 --- a/resources/libraries/python/VppConfigGenerator.py +++ b/resources/libraries/python/VppConfigGenerator.py @@ -67,7 +67,7 @@ ip6 {{ hash-buckets 2000000 heap-size 3G }} - +{snatconfig} """ # End VPP configuration template. @@ -83,22 +83,21 @@ class VppConfigGenerator(object): :param node: DUT node :type node: dict - :return: nothing + :returns: nothing """ for port in node['interfaces'].keys(): pci_addr = Topology.get_interface_pci_addr(node, port) if pci_addr: self.add_pci_device(node, pci_addr) - def add_pci_device(self, node, *pci_devices): """Add PCI device configuration for node. :param node: DUT node. - :param pci_device: PCI devices (format 0000:00:00.0 or 00:00.0) + :param pci_devices: PCI devices (format 0000:00:00.0 or 00:00.0) :type node: dict :type pci_devices: tuple - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -129,7 +128,7 @@ class VppConfigGenerator(object): :param cpu_config: CPU configuration option, as a string. :type node: dict :type cpu_config: str - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -150,7 +149,7 @@ class VppConfigGenerator(object): as a string. :type node: dict :type socketmem_config: str - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -168,7 +167,7 @@ class VppConfigGenerator(object): :param heapsize_config: Heap Size configuration, as a string. :type node: dict :type heapsize_config: str - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -186,56 +185,73 @@ class VppConfigGenerator(object): :param rxqueues_config: Rxqueues configuration, as a string. :type node: dict :type rxqueues_config: str - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) - if not hostname in self._nodeconfig: + if hostname not in self._nodeconfig: self._nodeconfig[hostname] = {} - if not 'rxqueues_config' in self._nodeconfig[hostname]: + if 'rxqueues_config' not in self._nodeconfig[hostname]: self._nodeconfig[hostname]['rxqueues_config'] = [] self._nodeconfig[hostname]['rxqueues_config'].append(rxqueues_config) - logger.debug('Setting hostname {} rxqueues config to {}'.\ - format(hostname, rxqueues_config)) + logger.debug('Setting hostname {} rxqueues config to {}'. + format(hostname, rxqueues_config)) def add_no_multi_seg_config(self, node): """Add No Multi Seg configuration for node. :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) - if not hostname in self._nodeconfig: + if hostname not in self._nodeconfig: self._nodeconfig[hostname] = {} - if not 'no_multi_seg_config' in self._nodeconfig[hostname]: + if 'no_multi_seg_config' not in self._nodeconfig[hostname]: self._nodeconfig[hostname]['no_multi_seg_config'] = [] - self._nodeconfig[hostname]['no_multi_seg_config'].append( - "no-multi-seg") - logger.debug('Setting hostname {} config with {}'.\ - format(hostname, "no-multi-seg")) + self._nodeconfig[hostname]['no_multi_seg_config'].append("no-multi-seg") + logger.debug('Setting hostname {} config with {}'. + format(hostname, "no-multi-seg")) def add_enable_vhost_user_config(self, node): """Add enable-vhost-user configuration for node. :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) - if not hostname in self._nodeconfig: + if hostname not in self._nodeconfig: self._nodeconfig[hostname] = {} - if not 'enable_vhost_user' in self._nodeconfig[hostname]: + if 'enable_vhost_user' not in self._nodeconfig[hostname]: self._nodeconfig[hostname]['enable_vhost_user'] = [] - self._nodeconfig[hostname]['enable_vhost_user'].append( - "enable-vhost-user") - logger.debug('Setting hostname {} config with {}'.\ - format(hostname, "enable-vhost-user")) + self._nodeconfig[hostname]['enable_vhost_user'].\ + append("enable-vhost-user") + logger.debug('Setting hostname {} config with {}'. + format(hostname, "enable-vhost-user")) + + def add_snat_config(self, node): + """Add SNAT configuration for the node. + + :param node: DUT node. + :type node: dict + :returns: nothing + """ + if node['type'] != NodeType.DUT: + raise ValueError('Node type is not a DUT') + hostname = Topology.get_node_hostname(node) + if hostname not in self._nodeconfig: + self._nodeconfig[hostname] = {} + if 'snat_config' not in self._nodeconfig[hostname]: + self._nodeconfig[hostname]['snat_config'] = [] + self._nodeconfig[hostname]['snat_config'].append("deterministic") + logger.debug('Setting hostname {} config with {}'. + format(hostname, "SNAT")) def add_cryptodev_config(self, node, count): """Add cryptodev configuration for node. @@ -276,7 +292,7 @@ class VppConfigGenerator(object): :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -291,7 +307,7 @@ class VppConfigGenerator(object): :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -306,7 +322,7 @@ class VppConfigGenerator(object): :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -337,7 +353,7 @@ class VppConfigGenerator(object): :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') @@ -352,45 +368,59 @@ class VppConfigGenerator(object): :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) if hostname in self._nodeconfig: self._nodeconfig[hostname]['rxqueues_config'] = [] - logger.debug('Clearing rxqueues config for hostname {}.'.\ - format(hostname)) + logger.debug('Clearing rxqueues config for hostname {}.'. + format(hostname)) def remove_no_multi_seg_config(self, node): """Remove No Multi Seg configuration from node. :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) if hostname in self._nodeconfig: self._nodeconfig[hostname]['no_multi_seg_config'] = [] - logger.debug('Clearing No Multi Seg config for hostname {}.'.\ - format(hostname)) + logger.debug('Clearing No Multi Seg config for hostname {}.'. + format(hostname)) def remove_enable_vhost_user_config(self, node): """Remove enable-vhost-user configuration from node. :param node: DUT node. :type node: dict - :return: nothing + :returns: nothing """ if node['type'] != NodeType.DUT: raise ValueError('Node type is not a DUT') hostname = Topology.get_node_hostname(node) if hostname in self._nodeconfig: self._nodeconfig[hostname]['enable_vhost_user'] = [] - logger.debug('Clearing enable-vhost-user config for hostname {}.'.\ - format(hostname)) + logger.debug('Clearing enable-vhost-user config for hostname {}.'. + format(hostname)) + + def remove_snat_config(self, node): + """Remove SNAT configuration for the node. + + :param node: DUT node. + :type node: dict + :returns: nothing + """ + if node['type'] != NodeType.DUT: + raise ValueError('Node type is not a DUT') + hostname = Topology.get_node_hostname(node) + if hostname in self._nodeconfig: + self._nodeconfig[hostname]['snat_config'] = [] + logger.debug('Clearing SNAT config for hostname {}.'.format(hostname)) def apply_config(self, node, waittime=5, retries=12): """Generate and apply VPP configuration for node. @@ -404,6 +434,8 @@ class VppConfigGenerator(object): :type node: dict :type waittime: int :type retries: int + :raises RuntimeError: If writing config file failed, or restarting of + VPP failed. """ if node['type'] != NodeType.DUT: @@ -420,6 +452,7 @@ class VppConfigGenerator(object): enablevhostuser = "" cryptodevconfig = "" uiodriverconfig = "" + snatconfig = "" if hostname in self._nodeconfig: cfg = self._nodeconfig[hostname] @@ -451,6 +484,11 @@ class VppConfigGenerator(object): if 'enable_vhost_user' in cfg: enablevhostuser = " " + "\n ".join(cfg['enable_vhost_user']) + if 'snat_config' in cfg: + snatconfig = "snat {\n" + snatconfig += " " + "\n ".join(cfg['snat_config']) + snatconfig += "\n}" + vppconfig = VPP_CONFIG_TEMPLATE.format(cpuconfig=cpuconfig, pciconfig=pciconfig, cryptodevconfig=cryptodevconfig, @@ -460,7 +498,8 @@ class VppConfigGenerator(object): rxqueuesconfig=rxqueuesconfig, txqueuesconfig=txqueuesconfig, nomultiseg=nomultiseg, - enablevhostuser=enablevhostuser) + enablevhostuser=enablevhostuser, + snatconfig=snatconfig) logger.debug('Writing VPP config to host {}: "{}"'.format(hostname, vppconfig)) @@ -517,7 +556,6 @@ class VppConfigGenerator(object): (ret, stdout, stderr) = \ ssh.exec_command('echo show hardware-interfaces | ' 'nc 0 5002') - if ret == 0: vpp_is_running = True else: diff --git a/resources/libraries/python/ssh.py b/resources/libraries/python/ssh.py index 7b15998be0..961f7e2ee8 100644 --- a/resources/libraries/python/ssh.py +++ b/resources/libraries/python/ssh.py @@ -285,7 +285,7 @@ class SSH(object): logger.trace('SCP {0} to {1}:{2}'.format( local_path, self._ssh.get_transport().getpeername(), remote_path)) # SCPCLient takes a paramiko transport as its only argument - scp = SCPClient(self._ssh.get_transport()) + scp = SCPClient(self._ssh.get_transport(), socket_timeout=10) start = time() scp.put(local_path, remote_path) scp.close() diff --git a/resources/libraries/robot/default.robot b/resources/libraries/robot/default.robot index 08315c32ef..05314d6a15 100644 --- a/resources/libraries/robot/default.robot +++ b/resources/libraries/robot/default.robot @@ -281,6 +281,13 @@ | | :FOR | ${dut} | IN | @{duts} | | | Add Enable Vhost User Config | ${nodes['${dut}']} +| Add SNAT to all DUTs +| | [Documentation] | Add SNAT configuration to all DUTs. +| | ... +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Add SNAT Config | ${nodes['${dut}']} + | Add Cryptodev to all DUTs | | [Documentation] | AddCryptodev to VPP startup configuration to all | | ... | DUTs @@ -310,6 +317,7 @@ | | | Remove Rxqueues Config | ${nodes['${dut}']} | | | Remove No Multi Seg Config | ${nodes['${dut}']} | | | Remove Enable Vhost User Config | ${nodes['${dut}']} +| | | Remove SNAT Config | ${nodes['${dut}']} | Setup default startup configuration of VPP on all DUTs | | [Documentation] | Setup default startup configuration of VPP to all DUTs. diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot index ccfc526b03..7c1589392b 100644 --- a/resources/libraries/robot/performance.robot +++ b/resources/libraries/robot/performance.robot @@ -2334,6 +2334,43 @@ | | Add arp on dut | ${dut2} | ${dut2_if1} | ${dut1_dut2_ip4_address} | | ... | ${dut1_if2_mac} +| SNAT is initialized in a 3-node circular topology +| | [Documentation] | Initialization of 3-node topology with SNAT between DUTs: +| | ... | - set interfaces up +| | ... | - set IP addresses +| | ... | - set ARP +| | ... | - create routes +| | ... | - set SNAT - only on DUT1 +| | ... +| | Set Interface State | ${dut1} | ${dut1_if1} | up +| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | Set Interface State | ${dut2} | ${dut2_if1} | up +| | Set Interface State | ${dut2} | ${dut2_if2} | up +| | All Vpp Interfaces Ready Wait | ${nodes} +| | ... +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if1} | 10.0.0.1 | 20 +| | IP addresses are set on interfaces | ${dut1} | ${dut1_if2} | 11.0.0.1 | 20 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if1} | 11.0.0.2 | 20 +| | IP addresses are set on interfaces | ${dut2} | ${dut2_if2} | 12.0.0.1 | 20 +| | ... +| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ... +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 11.0.0.2 | ${dut2_if1_mac} +| | Add arp on dut | ${dut2} | ${dut2_if1} | 11.0.0.1 | ${dut1_if2_mac} +| | Add arp on dut | ${dut2} | ${dut2_if2} | 12.0.0.2 | ${tg_if2_mac} +| | ... +| | Vpp Route Add | ${dut1} | 12.0.0.2 | 32 | 11.0.0.2 | ${dut1_if2} +| | Vpp Route Add | ${dut1} | 20.0.0.0 | 18 | 10.0.0.2 | ${dut1_if1} +| | Vpp Route Add | ${dut2} | 12.0.0.0 | 24 | 12.0.0.2 | ${dut2_if2} +| | Vpp Route Add | ${dut2} | 200.0.0.0 | 30 | 11.0.0.1 | ${dut2_if1} +| | ... +| | Set inside and outside interfaces | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Set deterministic mode for SNAT | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 + | DPDK 2-node Performance Suite Setup with DUT's NIC model | | [Documentation] | | ... | Updates interfaces on all nodes and setup global diff --git a/resources/libraries/robot/snat.robot b/resources/libraries/robot/snat.robot new file mode 100644 index 0000000000..12c7a71369 --- /dev/null +++ b/resources/libraries/robot/snat.robot @@ -0,0 +1,150 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.SNATUtil +| Library | resources.libraries.python.NAT.NATUtil +| Documentation | Keywords for SNAT feature in VPP. + +*** Keywords *** +| Set inside and outside interfaces +| | [Documentation] | Set inside and outside interfaces for SNAT. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to set SNAT interfaces on. Type: dictionary +| | ... | - int_in - Inside interface. Type: string +| | ... | - int_out - Outside interface. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set inside and outside interfaces \| ${nodes['DUT1']} \ +| | ... | \| FortyGigabitEtherneta/0/0 \| FortyGigabitEtherneta/0/1 \| +| | ... +| | [Arguments] | ${node} | ${int_in} | ${int_out} +| | ... +| | ${int_in_name}= | Set variable | ${node['interfaces']['${int_in}']['name']} +| | ${int_out_name}= | Set variable | ${node['interfaces']['${int_out}']['name']} +| | Set SNAT Interfaces | ${node} | ${int_in_name} | ${int_out_name} + +| Set deterministic mode for SNAT +| | [Documentation] | Set deterministic behaviour of SNAT. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to set deterministic mode for SNAT on. +| | ... | Type: dictionary +| | ... | - ip_in - Inside IP. Type: string +| | ... | - subnet_in - Inside IP subnet. Type: string +| | ... | - ip_out - Outside IP. Type: string +| | ... | - subnet_out - Outside IP subnet. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set deterministic mode for SNAT \| ${nodes['DUT1']} \ +| | ... | \| 100.0.0.0 \| 12 \| 12.1.1.0 \| 24 \| +| | ... +| | [Arguments] | ${node} | ${ip_in} | ${subnet_in} | ${ip_out} | ${subnet_out} +| | ... +| | Set SNAT deterministic | ${node} | ${ip_in} | ${subnet_in} | ${ip_out} +| | ... | ${subnet_out} + +| Set workers for SNAT +| | [Documentation] | Set workers for SNAT. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to set SNAT workers on. Type: dictionary +| | ... | - lcores - list of cores, format: range e.g. 1-5 or list of ranges \ +| | ... | e.g.: 1-5,18-22. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Set workers for SNAT \| ${nodes['DUT1']} \| 12-23,36-47 \| +| | ... +| | [Arguments] | ${node} | ${lcores} +| | ... +| | Set SNAT workers | ${node} | ${lcores} + +| Show SNAT verbose +| | [Documentation] | Get the SNAT settings on the node. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to show SNAT. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Show SNAT verbose \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Show SNAT | ${node} + +| Get SNAT deterministic forward +| | [Documentation] | Show forward IP address and port(s). +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to get SNAT deterministic forward on. +| | ... | Type: dictionary +| | ... | - ip - IP address. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Get SNAT deterministic forward \| ${nodes['DUT1']} \| 10.0.0.2 \| +| | ... +| | [Arguments] | ${node} | ${ip} +| | ... +| | Show SNAT deterministic forward | ${node} | ${ip} + +| Get SNAT deterministic reverse +| | [Documentation] | Show reverse IP address. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to get SNAT deterministic reverse on. +| | ... | Type: dictionary +| | ... | - ip - IP address. Type: string +| | ... | - port - Port. Type: string or integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Get SNAT deterministic reverse \| ${nodes['DUT1']} \| 10.0.0.2 \ +| | ... | \| 1025 \| +| | ... +| | [Arguments] | ${node} | ${ip} | ${port} +| | ... +| | Show SNAT deterministic reverse | ${node} | ${ip} | ${port} + +| Get NAT interfaces +| | [Documentation] | Get list of interfaces configured with NAT from VPP node. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to get SNAT interfaces on. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Get NAT interfaces \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | VPP get NAT interfaces | ${node} + +| Get NAT static mappings +| | [Documentation] | Get NAT static mappings from VPP node. +| | ... +| | ... | *Arguments:* +| | ... | - node - DUT node to get SNAT static mappings on. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Get NAT static mappings \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | VPP get NAT static mappings | ${node} diff --git a/resources/templates/vat/snat/snat_deterministic_forward.vat b/resources/templates/vat/snat/snat_deterministic_forward.vat new file mode 100644 index 0000000000..3bb7b2b1f9 --- /dev/null +++ b/resources/templates/vat/snat/snat_deterministic_forward.vat @@ -0,0 +1 @@ +exec snat deterministic forward {ip}
\ No newline at end of file diff --git a/resources/templates/vat/snat/snat_deterministic_reverse.vat b/resources/templates/vat/snat/snat_deterministic_reverse.vat new file mode 100644 index 0000000000..1b9ac5bac5 --- /dev/null +++ b/resources/templates/vat/snat/snat_deterministic_reverse.vat @@ -0,0 +1 @@ +exec snat deterministic reverse {ip}:{port}
\ No newline at end of file diff --git a/resources/templates/vat/snat/snat_set_deterministic.vat b/resources/templates/vat/snat/snat_set_deterministic.vat new file mode 100644 index 0000000000..200ae69008 --- /dev/null +++ b/resources/templates/vat/snat/snat_set_deterministic.vat @@ -0,0 +1 @@ +exec snat deterministic add in {ip_in}/{subnet_in} out {ip_out}/{subnet_out}
\ No newline at end of file diff --git a/resources/templates/vat/snat/snat_set_interfaces.vat b/resources/templates/vat/snat/snat_set_interfaces.vat new file mode 100644 index 0000000000..905c219ca3 --- /dev/null +++ b/resources/templates/vat/snat/snat_set_interfaces.vat @@ -0,0 +1 @@ +exec set interface snat in {int_in} out {int_out}
\ No newline at end of file diff --git a/resources/templates/vat/snat/snat_set_workers.vat b/resources/templates/vat/snat/snat_set_workers.vat new file mode 100644 index 0000000000..23e8bac3eb --- /dev/null +++ b/resources/templates/vat/snat/snat_set_workers.vat @@ -0,0 +1 @@ +exec set snat workers {lcores}
\ No newline at end of file diff --git a/resources/templates/vat/snat/snat_show_snat.vat b/resources/templates/vat/snat/snat_show_snat.vat new file mode 100644 index 0000000000..0ce9f1e914 --- /dev/null +++ b/resources/templates/vat/snat/snat_show_snat.vat @@ -0,0 +1 @@ +exec show snat verbose
\ No newline at end of file diff --git a/resources/tools/t-rex/t-rex-stateless.py b/resources/tools/t-rex/t-rex-stateless.py index 504ef50eef..ae8d187670 100755 --- a/resources/tools/t-rex/t-rex-stateless.py +++ b/resources/tools/t-rex/t-rex-stateless.py @@ -172,12 +172,13 @@ def create_streams_v46(base_pkt_a, base_pkt_b, vm1, vm2, frame_size): return (stream1, stream2, lat_stream1, lat_stream2) + def create_streams(traffic_options, frame_size=64): """Create two IP packets to be used in stream. :param traffic_options: Parameters for packets. :param frame_size: Size of L2 frame. - :type traffic_options: list + :type traffic_options: dict :type frame_size: int :return: Packet instances. :rtype: Tuple of STLPktBuilder @@ -197,13 +198,91 @@ def create_streams(traffic_options, frame_size=64): p1_dst_end_ip = traffic_options['p1_dst_end_ip'] p2_dst_end_ip = traffic_options['p2_dst_end_ip'] - base_pkt_a = Ether()/IP(src=p1_src_start_ip, dst=p1_dst_start_ip, proto=61) - base_pkt_b = Ether()/IP(src=p2_src_start_ip, dst=p2_dst_start_ip, proto=61) + try: + p1_src_start_udp_port = traffic_options['p1_src_start_udp_port'] + p1_src_end_udp_port = traffic_options['p1_src_end_udp_port'] + p1_dst_start_udp_port = traffic_options['p1_dst_start_udp_port'] + p2_src_start_udp_port = traffic_options['p2_src_start_udp_port'] + p2_dst_start_udp_port = traffic_options['p2_dst_start_udp_port'] + p2_dst_end_udp_port = traffic_options['p2_dst_end_udp_port'] + ports_defined = True + except KeyError: + ports_defined = False + + if ports_defined: + base_pkt_a = (Ether() / + IP(src=p1_src_start_ip, dst=p1_dst_start_ip, proto=17) / + UDP(sport=int(p1_src_start_udp_port), + dport=int(p1_dst_start_udp_port))) + base_pkt_b = (Ether() / + IP(src=p2_src_start_ip, dst=p2_dst_start_ip, proto=17) / + UDP(sport=int(p2_src_start_udp_port), + dport=int(p2_dst_start_udp_port))) + else: + base_pkt_a = Ether() / IP(src=p1_src_start_ip, dst=p1_dst_start_ip, + proto=61) + base_pkt_b = Ether() / IP(src=p2_src_start_ip, dst=p2_dst_start_ip, + proto=61) # The following code applies raw instructions to packet (IP src/dst # increment). It splits the generated traffic by "ip_src"/"ip_dst" variable # to cores and fix IPv4 header checksum. - if p1_dst_end_ip and p2_dst_end_ip: + if ports_defined: + if p1_src_start_udp_port != p1_src_end_udp_port and \ + p1_src_start_ip != p1_src_end_ip: + vm1 = STLScVmRaw([ + STLVmTupleGen(ip_min=p1_src_start_ip, + ip_max=p1_src_end_ip, + port_min=int(p1_src_start_udp_port), + port_max=int(p1_src_end_udp_port), + name="tuple"), + STLVmWrFlowVar(fv_name="tuple.ip", pkt_offset="IP.src"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple.port", pkt_offset="UDP.sport") + ]) + vm2 = STLScVmRaw([ + STLVmTupleGen(ip_min=p2_dst_start_ip, + ip_max=p2_dst_start_ip, + port_min=int(p2_dst_start_udp_port), + port_max=int(p2_dst_end_udp_port), + name="tuple"), + STLVmWrFlowVar(fv_name="tuple.ip", pkt_offset="IP.dst"), + STLVmFixIpv4(offset="IP"), + STLVmWrFlowVar(fv_name="tuple.port", pkt_offset="UDP.dport") + ]) + elif p1_src_start_udp_port != p1_src_end_udp_port: + vm1 = STLScVmRaw([ + STLVmFlowVar(name="sport", + min_value=int(p1_src_start_udp_port), + max_value=int(p1_src_end_udp_port), + size=2, op="inc"), + STLVmWrFlowVar(fv_name="sport", pkt_offset="UDP.sport") + ]) + vm2 = STLScVmRaw([ + STLVmFlowVar(name="dport", + min_value=int(p2_dst_start_udp_port), + max_value=int(p2_dst_end_udp_port), + size=2, op="inc"), + STLVmWrFlowVar(fv_name="dport", pkt_offset="UDP.dport") + ]) + elif p1_src_start_udp_port == p1_src_end_udp_port: + vm1 = STLScVmRaw([STLVmFlowVar(name="src", + min_value=p1_src_start_ip, + max_value=p1_src_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="src", + pkt_offset="IP.src"), + STLVmFixIpv4(offset="IP"), + ], split_by_field="src") + vm2 = STLScVmRaw([STLVmFlowVar(name="src", + min_value=p2_src_start_ip, + max_value=p2_src_end_ip, + size=4, op="inc"), + STLVmWrFlowVar(fv_name="src", + pkt_offset="IP.src"), + STLVmFixIpv4(offset="IP"), + ], split_by_field="src") + elif p1_dst_end_ip and p2_dst_end_ip: vm1 = STLScVmRaw([STLVmFlowVar(name="dst", min_value=p1_dst_start_ip, max_value=p1_dst_end_ip, @@ -524,6 +603,7 @@ def parse_args(): # help="Port 1 source MAC address") # parser.add_argument("--p1_dst_mac", # help="Port 1 destination MAC address") + parser.add_argument("--p1_src_start_ip", required=True, help="Port 1 source start IP address") parser.add_argument("--p1_src_end_ip", @@ -534,10 +614,26 @@ def parse_args(): parser.add_argument("--p1_dst_end_ip", default=False, help="Port 1 destination end IP address") + + parser.add_argument("--p1_src_start_udp_port", + default=None, + help="Port 1 source start UDP port.") + parser.add_argument("--p1_src_end_udp_port", + default=None, + help="Port 1 source end UDP port.") + + parser.add_argument("--p1_dst_start_udp_port", + default=None, + help="Port 1 destination start UDP port.") + parser.add_argument("--p1_dst_end_udp_port", + default=None, + help="Port 1 destination end UDP port.") + # parser.add_argument("--p2_src_mac", # help="Port 2 source MAC address") # parser.add_argument("--p2_dst_mac", # help="Port 2 destination MAC address") + parser.add_argument("--p2_src_start_ip", required=True, help="Port 2 source start IP address") parser.add_argument("--p2_src_end_ip", @@ -549,6 +645,20 @@ def parse_args(): default=False, help="Port 2 destination end IP address") + parser.add_argument("--p2_src_start_udp_port", + default=None, + help="Port 2 source start UDP port.") + parser.add_argument("--p2_src_end_udp_port", + default=None, + help="Port 2 source end UDP port.") + + parser.add_argument("--p2_dst_start_udp_port", + default=None, + help="Port 2 destination start UDP port.") + parser.add_argument("--p2_dst_end_udp_port", + default=None, + help="Port 2 destination end UDP port.") + return parser.parse_args() diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-snat-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-snat-ndrpdrdisc.robot new file mode 100644 index 0000000000..21227c0316 --- /dev/null +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-snat-ndrpdrdisc.robot @@ -0,0 +1,246 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Resource | resources/libraries/robot/snat.robot +| Resource | resources/libraries/robot/traffic.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | SNAT | BASE | THIS +| ... +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| ... +| Documentation | *SNAT performance test cases* +| ... +| ... | *High level description* +| ... +| ... | - NDR and PDR tests +| ... | - 3-node topology, TG-DUT1-DUT2-TG, SNAT is enabled between DUTs. +| ... | - Cores / threads: 1t1c and 2t2c +| ... | - Framesize: 64B, 1518B, IMIX +| ... | - Packet: ETH / IP(src, dst) / UDP(src_port, dst_port) / payload +| ... +| ... | *Low level description* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 +| ... | tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, one flow per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with UDP header and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-1p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc02-64B-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-1p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc03-1518B-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-1p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc04-1518B-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-1p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc05-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-1p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc06-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 1 port (session) per user. +| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-1p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-1p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale-snat-ndrpdrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale-snat-ndrpdrdisc.robot new file mode 100644 index 0000000000..a9b0c5df16 --- /dev/null +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale-snat-ndrpdrdisc.robot @@ -0,0 +1,919 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Resource | resources/libraries/robot/snat.robot +| Resource | resources/libraries/robot/traffic.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | SNAT | SCALE | THIS +| ... +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| ... +| Test Setup | Performance test setup +| ... +| Documentation | *SNAT performance test cases* +| ... +| ... | *High level description* +| ... +| ... | - NDR and PDR tests +| ... | - 3-node topology, TG-DUT1-DUT2-TG, SNAT is enabled between DUTs. +| ... | - Cores / threads: 1t1c and 2t2c +| ... | - Framesize: 64B, 1518B, IMIX +| ... | - Packet: ETH / IP(src, dst) / UDP(src_port, dst_port) / payload +| ... | - scale: src: 1 user, 10 users, 100 users, ..., 4000 up to the memory +| ... | limit; 15 ports per user +| ... +| ... | *Low level description* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2 +| ... | tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, one flow per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with UDP header and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit} | ${10000000000} + +*** Test Cases *** +| tc01-64B-1t1c-ethip4-ip4base-snat-1u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc02-64B-1t1c-ethip4-ip4base-snat-1u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc03-64B-1t1c-ethip4-ip4base-snat-10u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-10u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc04-64B-1t1c-ethip4-ip4base-snat-10u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-10u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc05-64B-1t1c-ethip4-ip4base-snat-100u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-100u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc06-64B-1t1c-ethip4-ip4base-snat-100u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-100u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc07-64B-1t1c-ethip4-ip4base-snat-1000u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1000u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc08-64B-1t1c-ethip4-ip4base-snat-1000u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1000u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc09-64B-1t1c-ethip4-ip4base-snat-2000u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 2000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-2000u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-2000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc10-64B-1t1c-ethip4-ip4base-snat-2000u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 2000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-2000u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-2000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc11-64B-1t1c-ethip4-ip4base-snat-4000u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 4000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-4000u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-4000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc12-64B-1t1c-ethip4-ip4base-snat-4000u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 4000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-4000u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${64} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-4000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc13-1518B-1t1c-ethip4-ip4base-snat-1u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc14-1518B-1t1c-ethip4-ip4base-snat-1u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc15-1518B-1t1c-ethip4-ip4base-snat-10u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-10u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc16-1518B-1t1c-ethip4-ip4base-snat-10u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-10u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc17-1518B-1t1c-ethip4-ip4base-snat-100u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-100u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc18-1518B-1t1c-ethip4-ip4base-snat-100u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-100u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc19-1518B-1t1c-ethip4-ip4base-snat-1000u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1000u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc20-1518B-1t1c-ethip4-ip4base-snat-1000u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1000u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | ${1518} +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc21-IMIX-1t1c-ethip4-ip4base-snat-1u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc22-IMIX-1t1c-ethip4-ip4base-snat-1u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1 user and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc23-IMIX-1t1c-ethip4-ip4base-snat-10u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-10u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc24-IMIX-1t1c-ethip4-ip4base-snat-10u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 10 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-10u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-10u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc25-IMIX-1t1c-ethip4-ip4base-snat-100u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-100u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc26-IMIX-1t1c-ethip4-ip4base-snat-100u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 100 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-100u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-100u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} + +| tc27-IMIX-1t1c-ethip4-ip4base-snat-1000u-15p-ndrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Run keywords | Performance test teardown | ${min_rate}pps +| | ... | ${framesize} | 3-node-IPv4-SNAT-1000u-15p +| | ... | AND | Show SNAT verbose | ${dut1} +| | ... | AND | Show SNAT verbose | ${dut2} +| | ... +| | [Tags] | 1T1C | STHREAD | NDRDISC +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} + +| tc28-IMIX-1t1c-ethip4-ip4base-snat-1000u-15p-pdrdisc +| | [Documentation] +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\ +| | ... | 1 receive queue per NIC port. SNAT is configured between DUTs -\ +| | ... | 1000 users and 15 ports (sessions) per user. +| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. +| | ... +| | [Teardown] | Performance test teardown | ${min_rate}pps | ${framesize} +| | ... | 3-node-IPv4-SNAT-1000u-15p +| | ... +| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH +| | ... +| | ${framesize}= | Set Variable | IMIX_v4_1 +| | ${min_rate}= | Set Variable | ${100000} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add SNAT to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When SNAT is initialized in a 3-node circular topology +| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} +| | ... | ${binary_max} | 3-node-IPv4-SNAT-1000u-15p | ${min_rate} | ${max_rate} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} |