diff options
-rw-r--r-- | GPL/traffic_scripts/PacketVerifier.py | 5 | ||||
-rw-r--r-- | GPL/traffic_scripts/geneve_tunnel.py | 348 | ||||
-rw-r--r-- | GPL/traffic_scripts/vxlan.py | 1 | ||||
-rw-r--r-- | docs/tag_documentation.rst | 12 | ||||
-rw-r--r-- | resources/api/vpp/supported_crcs.yaml | 8 | ||||
-rw-r--r-- | resources/libraries/python/GeneveUtil.py | 126 | ||||
-rw-r--r-- | resources/libraries/python/LispSetup.py | 4 | ||||
-rw-r--r-- | resources/libraries/python/VPPUtil.py | 23 | ||||
-rw-r--r-- | resources/libraries/python/topology.py | 2 | ||||
-rw-r--r-- | resources/libraries/robot/ip/geneve.robot | 74 | ||||
-rw-r--r-- | resources/libraries/robot/shared/test_teardown.robot | 136 | ||||
-rw-r--r-- | resources/libraries/robot/shared/traffic.robot | 91 | ||||
-rw-r--r-- | tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot | 107 |
13 files changed, 92 insertions, 845 deletions
diff --git a/GPL/traffic_scripts/PacketVerifier.py b/GPL/traffic_scripts/PacketVerifier.py index bb91b9361c..c915921625 100644 --- a/GPL/traffic_scripts/PacketVerifier.py +++ b/GPL/traffic_scripts/PacketVerifier.py @@ -331,10 +331,9 @@ def create_gratuitous_arp_request(src_mac, src_ip): def auto_pad(packet): """Pads zeroes at the end of the packet if the total packet length is less - then 60 bytes in case of IPv4 or 78 bytes in case of IPv6. + then 64 bytes in case of IPv4 or 78 bytes in case of IPv6. """ - # TODO: add document explaining deduction of FCS part - min_len = 78 if packet.haslayer(IPv6) else 60 + min_len = 78 if packet.haslayer(IPv6) else 64 pad_layer = Raw if packet.haslayer(Raw) \ else Padding if packet.haslayer(Padding) else None if pad_layer: diff --git a/GPL/traffic_scripts/geneve_tunnel.py b/GPL/traffic_scripts/geneve_tunnel.py deleted file mode 100644 index 4cd728b575..0000000000 --- a/GPL/traffic_scripts/geneve_tunnel.py +++ /dev/null @@ -1,348 +0,0 @@ -#!/usr/bin/env python3 - -# Copyright (c) 2020 Cisco and/or its affiliates. -# -# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later -# -# Licensed under the Apache License 2.0 or -# GNU General Public License v2.0 or later; you may not use this file -# except in compliance with one of these Licenses. You -# may obtain a copy of the Licenses at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html -# -# Note: If this file is linked with Scapy, which is GPLv2+, your use of it -# must be under GPLv2+. If at any point in the future it is no longer linked -# with Scapy (or other GPLv2+ licensed software), you are free to choose -# Apache 2. -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""Traffic script for GENEVE tunnel verification.""" - -import sys - -from ipaddress import ip_address -from scapy.contrib.geneve import GENEVE -from scapy.layers.inet import IP, UDP -from scapy.layers.inet6 import IPv6, ICMPv6ND_NS -from scapy.layers.l2 import Ether -from scapy.packet import Raw - -from .PacketVerifier import RxQueue, TxQueue -from .TrafficScriptArg import TrafficScriptArg - - -def check_geneve( - pkt_recv, ip_layer, outer_src_mac, outer_dst_mac, inner_src_mac, - inner_dst_mac, outer_src_ip, outer_dst_ip, inner_src_ip, inner_dst_ip, - udp_dport, gen_vni): - """Check received GENEVE packet. - - :param pkt_recv: Received packet to verify. - :param ip_layer: Scapy IP or IPv6 layer. - :param outer_src_mac: Outer source MAC address. - :param outer_dst_mac: Outer destination MAC address. - :param inner_src_mac: Inner source MAC address. - :param inner_dst_mac: Inner destination MAC address. - :param outer_src_ip: Outer source IP/IPv6 address. - :param outer_dst_ip: Outer destination IP/IPv6 address. - :param inner_src_ip: Inner source IP/IPv6 address. - :param inner_dst_ip: Inner destination IP/IPv6 address. - :param udp_dport: UDP destination port. - :param gen_vni: GENEVE VNI. - :type pkt_recv: scapy.Ether - :type ip_layer: scapy.layers.inet.IP or scapy.layers.inet6.IPv6 - :type outer_src_mac: str - :type outer_dst_mac: str - :type inner_src_mac: str - :type inner_dst_mac: str - :type outer_src_ip: str - :type outer_dst_ip: str - :type inner_src_ip: str - :type inner_dst_ip: str - :type udp_dport: int - :type gen_vni: int - :raises RuntimeError: If received packet is invalid. - """ - try: - if not isinstance(pkt_recv[0], Ether): - raise RuntimeError( - f"Received packet hasn't outer Ether layer: {pkt_recv!r}" - ) - elif not isinstance(pkt_recv[1], ip_layer): - raise RuntimeError( - f"Received packet hasn't outer {ip_layer.__name__} layer: " - f"{pkt_recv!r}" - ) - elif not isinstance(pkt_recv[2], UDP): - raise RuntimeError( - f"Received packet hasn't UDP layer: {pkt_recv!r}" - ) - elif not isinstance(pkt_recv[3], GENEVE): - raise RuntimeError( - f"Received packet hasn't GENEVE layer: {pkt_recv!r}" - ) - elif not isinstance(pkt_recv[4], Ether): - raise RuntimeError( - f"Received packet hasn't inner Ether layer: {pkt_recv!r}" - ) - elif not isinstance(pkt_recv[5], ip_layer): - raise RuntimeError( - f"Received packet hasn't inner {ip_layer.__name__} layer: " - f"{pkt_recv!r}" - ) - elif not isinstance(pkt_recv[6], Raw): - raise RuntimeError( - f"Received packet hasn't inner Raw layer: {pkt_recv!r}" - ) - except IndexError: - raise RuntimeError( - f"Received packet doesn't contain all layers: {pkt_recv!r}" - ) - - if pkt_recv[Ether].src != outer_src_mac: - raise RuntimeError( - f"Received frame has invalid outer source MAC address: " - f"{pkt_recv[Ether].src} should be: {outer_src_mac}" - ) - - if pkt_recv[Ether].dst != outer_dst_mac: - raise RuntimeError( - f"Received frame has invalid outer destination MAC address: " - f"{pkt_recv[Ether].dst} should be: {outer_dst_mac}" - ) - - if pkt_recv[ip_layer].src != outer_src_ip: - raise RuntimeError( - f"Received packet has invalid outer source address: " - f"{pkt_recv[ip_layer].src} should be: {outer_src_ip}" - ) - - if pkt_recv[ip_layer].dst != outer_dst_ip: - raise RuntimeError( - f"Received packet has invalid outer destination address: " - f"{pkt_recv[ip_layer].dst} should be: {outer_dst_ip}" - ) - - if pkt_recv[UDP].dport != udp_dport: - raise RuntimeError( - f"Received packet has invalid UDP dport: " - f"{pkt_recv[UDP].dport} should be: {udp_dport}" - ) - - if pkt_recv[GENEVE].vni != gen_vni: - raise RuntimeError( - f"Received packet has invalid GENEVE vni: " - f"{pkt_recv[GENEVE].vni} should be: {gen_vni}" - ) - - if pkt_recv[GENEVE].proto != 0x6558: - raise RuntimeError( - f"Received packet has invalid GENEVE protocol number: " - f"{pkt_recv[GENEVE].proto} should be: 0x6558" - ) - - if pkt_recv[Ether:2].src != inner_src_mac: - raise RuntimeError( - f"Received frame has invalid inner source MAC address: " - f"{pkt_recv[Ether:2].src} should be: {inner_src_mac}" - ) - - if pkt_recv[Ether:2].dst != inner_dst_mac: - raise RuntimeError( - f"Received frame has invalid inner destination MAC address: " - f"{pkt_recv[Ether:2].dst} should be: {inner_dst_mac}" - ) - - if pkt_recv[ip_layer:2].src != inner_src_ip: - raise RuntimeError( - f"Received packet has invalid inner source address: " - f"{pkt_recv[ip_layer:2].src} should be: {inner_src_ip}" - ) - - if pkt_recv[ip_layer:2].dst != inner_dst_ip: - raise RuntimeError( - f"Received packet has invalid inner destination address: " - f"{pkt_recv[ip_layer:2].dst} should be: {inner_dst_ip}" - ) - - -def check_ip(pkt_recv, ip_layer, src_mac, dst_mac, src_ip, dst_ip): - """Check received IP/IPv6 packet. - - :param pkt_recv: Received packet to verify. - :param ip_layer: Scapy IP layer. - :param src_mac: Source MAC address. - :param dst_mac: Destination MAC address. - :param src_ip: Source IP/IPv6 address. - :param dst_ip: Destination IP/IPv6 address. - :type pkt_recv: scapy.Ether - :type ip_layer: scapy.layers.inet.IP or scapy.layers.inet6.IPv6 - :type src_mac: str - :type dst_mac: str - :type src_ip: str - :type dst_ip: str - :raises RuntimeError: If received packet is invalid. - """ - if pkt_recv[Ether].src != src_mac: - raise RuntimeError( - f"Received frame has invalid source MAC address: " - f"{pkt_recv[Ether].src} should be: {src_mac}" - ) - - if pkt_recv[Ether].dst != dst_mac: - raise RuntimeError( - f"Received frame has invalid destination MAC address: " - f"{pkt_recv[Ether].dst} should be: {dst_mac}" - ) - - if not pkt_recv.haslayer(ip_layer): - raise RuntimeError( - f"Not an {ip_layer.__name__} packet received: {pkt_recv!r}" - ) - - if pkt_recv[ip_layer].dst != dst_ip: - raise RuntimeError( - f"Received packet has invalid destination {ip_layer.__name__} " - f"address: {pkt_recv[ip_layer.__name__].dst} should be: {dst_ip}" - ) - - if pkt_recv[ip_layer].src != src_ip: - raise RuntimeError( - f"Received packet has invalid destination {ip_layer.__name__} " - f"address: {pkt_recv[ip_layer.__name__].dst} should be: {src_ip}" - ) - - if ip_layer == IP and pkt_recv[ip_layer].proto != 61: - raise RuntimeError( - f"Received packet has invalid IP protocol: " - f"{pkt_recv[ip_layer].proto} should be: 61" - ) - - -def main(): - """Send and receive GENEVE packets.""" - - args = TrafficScriptArg( - [ - u"tx_src_mac", u"tx_dst_mac", u"rx_src_mac", u"rx_dst_mac", - u"tun_local_ip", u"tun_remote_ip", u"tun_vni", u"tun_src_ip", - u"tun_dst_ip" - ] - ) - - tx_txq = TxQueue(args.get_arg(u"tx_if")) - tx_rxq = RxQueue(args.get_arg(u"tx_if")) - rx_txq = TxQueue(args.get_arg(u"rx_if")) - rx_rxq = RxQueue(args.get_arg(u"rx_if")) - - rx_src_mac = args.get_arg(u"rx_src_mac") - rx_dst_mac = args.get_arg(u"rx_dst_mac") - tx_src_mac = args.get_arg(u"tx_src_mac") - tx_dst_mac = args.get_arg(u"tx_dst_mac") - - tun_local_ip = args.get_arg(u"tun_local_ip") - tun_remote_ip = args.get_arg(u"tun_remote_ip") - tun_vni = args.get_arg(u"tun_vni") - tun_src_ip = args.get_arg(u"tun_src_ip") - tun_dst_ip = args.get_arg(u"tun_dst_ip") - - geneve_tunnel_mac = u"d0:0b:ee:d0:00:00" - geneve_udp_dport = 6081 - - tx_sent_packets = list() - src_ip = ip_address(tun_src_ip) - dst_ip = ip_address(tun_dst_ip) - ip_layer = IP if src_ip.version == 4 else IPv6 - tx_ip_pkt = ip_layer(src=src_ip, dst=dst_ip, proto=61) \ - if ip_layer == IP else ip_layer(src=src_ip, dst=dst_ip) - tx_pkt_send = (Ether(src=tx_src_mac, dst=tx_dst_mac) / tx_ip_pkt) - tx_pkt_send /= Raw() - size_limit = 78 if ip_layer == IPv6 else 60 - if len(tx_pkt_send) < size_limit: - tx_pkt_send[Raw].load += b"\0" * (size_limit - len(tx_pkt_send)) - - tx_sent_packets.append(tx_pkt_send) - tx_txq.send(tx_pkt_send) - - while True: - rx_pkt_recv = rx_rxq.recv(2) - - if rx_pkt_recv is None: - raise RuntimeError(f"GENEVE packet Rx timeout") - - if rx_pkt_recv.haslayer(ICMPv6ND_NS): - # read another packet in the queue if the current one is ICMPv6ND_NS - continue - else: - # otherwise process the current packet - break - - check_geneve( - rx_pkt_recv, ip_layer, rx_src_mac, rx_dst_mac, geneve_tunnel_mac, - rx_src_mac, tun_local_ip, tun_remote_ip, str(src_ip), str(dst_ip), - geneve_udp_dport, tun_vni - ) - - rx_inner_ip_pkt = IP( - src=rx_pkt_recv[Ether:2][IP].dst, - dst=rx_pkt_recv[Ether:2][IP].src, - proto=61 - ) if isinstance(rx_pkt_recv[Ether:2][1], IP) else IPv6( - src=rx_pkt_recv[Ether:2][IPv6].dst, - dst=rx_pkt_recv[Ether:2][IPv6].src - ) - rx_inner_ip_pkt /= Raw() - rx_inner_pkt = ( - Ether(src=rx_pkt_recv[4].dst, dst=rx_pkt_recv[4].src) / - rx_inner_ip_pkt - ) - size_limit = 78 if isinstance(rx_pkt_recv[Ether:2][1], IPv6) else 60 - if len(rx_inner_pkt) < size_limit: - rx_inner_pkt[Raw].load += b"\0" * (size_limit - len(rx_inner_pkt)) - - rx_outer_ip_pkt = IP( - src=rx_pkt_recv[Ether:1][IP].dst, - dst=rx_pkt_recv[Ether:1][IP].src - ) if isinstance(rx_pkt_recv[Ether:1][1], IP) else IPv6( - src=rx_pkt_recv[Ether:1][IPv6].dst, - dst=rx_pkt_recv[Ether:1][IPv6].src - ) - rx_pkt_send = ( - Ether(src=rx_pkt_recv[Ether:1].dst, dst=rx_pkt_recv[Ether:1].src) / - rx_outer_ip_pkt / - UDP(sport=6081, dport=6081) / - GENEVE(vni=rx_pkt_recv[GENEVE].vni) / - rx_inner_pkt - ) - rx_txq.send(rx_pkt_send) - - while True: - tx_pkt_recv = tx_rxq.recv(2, ignore=tx_sent_packets) - ip_layer = IP - - if tx_pkt_recv is None: - raise RuntimeError(f"{ip_layer.__name__} packet Rx timeout") - - if tx_pkt_recv.haslayer(ICMPv6ND_NS): - # read another packet in the queue if the current one is ICMPv6ND_NS - continue - else: - # otherwise process the current packet - break - - check_ip( - tx_pkt_recv, ip_layer, tx_dst_mac, tx_src_mac, str(dst_ip), str(src_ip) - ) - - sys.exit(0) - - -if __name__ == u"__main__": - main() diff --git a/GPL/traffic_scripts/vxlan.py b/GPL/traffic_scripts/vxlan.py index 33e5c7adff..985784d6f5 100644 --- a/GPL/traffic_scripts/vxlan.py +++ b/GPL/traffic_scripts/vxlan.py @@ -37,6 +37,5 @@ class VXLAN(Packet): def mysummary(self): return self.sprintf(f"VXLAN (vni={VXLAN.vni})") - bind_layers(UDP, VXLAN, dport=4789) bind_layers(VXLAN, Ether) diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst index a2d9f8466f..c37df8508b 100644 --- a/docs/tag_documentation.rst +++ b/docs/tag_documentation.rst @@ -219,10 +219,6 @@ Scaling Tags usually with 63 flow differing in source port number. Could be UDP or TCP. If NAT is used, the clients are inside. Outside IP range can differ. -.. topic:: GENEVE4_1TUN - - Test with 1 GENEVE IPv4 tunnel. - Test Category Tags ------------------ @@ -591,14 +587,6 @@ Encapsulation Tags All SRv6 test cases with two SIDs and without decapsulation. -.. topic:: GENEVE - - All test cases with GENEVE. - -.. topic:: GENEVE_L3MODE - - All test cases with GENEVE tunnel in L3 mode. - Interface Tags -------------- diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml index 7b5a718c29..2d25a42dfa 100644 --- a/resources/api/vpp/supported_crcs.yaml +++ b/resources/api/vpp/supported_crcs.yaml @@ -43,8 +43,6 @@ # 6x^ tc01-64B-1c-ethip4udp-ip4base-iacl1sf-10kflows-mrr # tc01-64B-1c-ethip4udp-ip4base-iacl1sl-10kflows-mrr # ^^ ip4fwdANDiaclANDacl10AND100_flows - add_node_next: '0x2457116d' # dev - add_node_next_reply: '0x2ed75f32' # dev avf_create: '0xdaab8ae2' # dev avf_create_reply: '0x5383d31f' # dev bond_create: '0x48883c7e' # perf @@ -92,10 +90,6 @@ det44_session_dump: '0xe45a3af7' # perf teardown # TODO: Which test to run to verify det44_* messages? # dhcp_proxy_dump / details # honeycomb - geneve_add_del_tunnel2: '0x8c2a9999' # dev - geneve_add_del_tunnel2_reply: '0x5383d31f' # dev - geneve_tunnel_details: '0xe27e2748' # dev - geneve_tunnel_dump: '0xf9e6675e' # dev gpe_enable_disable: '0xc264d7bf' # dev gpe_enable_disable_reply: '0xe8d4e804' # dev # gre_tunnel_add_del / reply # unused L1 keyword: create_gre_tunnel_interface @@ -255,8 +249,6 @@ # ^ dot1qANDl2bdmaclrnANDbaseANDmemif sw_interface_set_flags: '0x6a2b491a' # dev sw_interface_set_flags_reply: '0xe8d4e804' # dev - sw_interface_set_geneve_bypass: '0x65247409' # dev - sw_interface_set_geneve_bypass_reply: '0xe8d4e804' # dev sw_interface_set_l2_bridge: '0x2e483cd0' # dev sw_interface_set_l2_bridge_reply: '0xe8d4e804' # dev sw_interface_set_l2_xconnect: '0x1aaa2dbb' # dev diff --git a/resources/libraries/python/GeneveUtil.py b/resources/libraries/python/GeneveUtil.py deleted file mode 100644 index 3c8ebeebb3..0000000000 --- a/resources/libraries/python/GeneveUtil.py +++ /dev/null @@ -1,126 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -"""VPP GENEVE Plugin utilities library.""" - -from ipaddress import ip_address - -from resources.libraries.python.Constants import Constants -from resources.libraries.python.InterfaceUtil import InterfaceUtil -from resources.libraries.python.IPAddress import IPAddress -from resources.libraries.python.PapiExecutor import PapiSocketExecutor -from resources.libraries.python.topology import Topology - - -class GeneveUtil: - """VPP GENEVE Plugin Keywords.""" - - @staticmethod - def add_geneve_tunnel( - node, local_address, remote_address, vni, multicast_if=None, - encap_vrf=0, l3_mode=False, next_index=None): - """Add GENEVE tunnel on the specified VPP node. - - :param node: Topology node. - :param local_address: Local IP address. - :param remote_address: Remote IP address. - :param vni: Virtual network ID. - :param multicast_if: Interface key of multicast interface; used only if - remote is multicast. (Default value = None) - :param encap_vrf: The FIB ID for sending unicast GENEVE encap packets or - receiving multicast packets. (Default value = 0) - :param l3_mode: Use geneve tunnel in L3 mode (ip routing) if Tue else in - L2 mode (L2 switching). (Default value = False) - :param next_index: The index of the next node. - :type node: dict - :type local_address: str - :type remote_address: str - :type vni: int - :type multicast_if: str - :type encap_vrf: int - :type l3_mode: bool - :type next_index: int - :returns: SW interface index of created geneve tunnel. - :rtype: int - """ - cmd = u"geneve_add_del_tunnel2" - args = dict( - is_add=True, - local_address=IPAddress.create_ip_address_object( - ip_address(local_address) - ), - remote_address=IPAddress.create_ip_address_object( - ip_address(remote_address) - ), - mcast_sw_if_index=Topology.get_interface_sw_index( - node, multicast_if - ) if multicast_if else Constants.BITWISE_NON_ZERO, - encap_vrf_id=int(encap_vrf), - decap_next_index=next_index if l3_mode - else Constants.BITWISE_NON_ZERO, - vni=int(vni), - l3_mode=l3_mode - ) - err_msg = f"Failed to configure GENEVE tunnel on host {node[u'host']}!" - with PapiSocketExecutor(node) as papi_exec: - sw_if_index = papi_exec.add(cmd, **args).get_sw_if_index(err_msg) - - if_key = Topology.add_new_port(node, u"geneve_tunnel") - Topology.update_interface_sw_if_index(node, if_key, sw_if_index) - - ifc_name = InterfaceUtil.vpp_get_interface_name(node, sw_if_index) - Topology.update_interface_name(node, if_key, ifc_name) - - ifc_mac = InterfaceUtil.vpp_get_interface_mac(node, sw_if_index) - Topology.update_interface_mac_address(node, if_key, ifc_mac) - - return sw_if_index - - @staticmethod - def enable_interface_geneve_bypass(node, interface, is_ipv6=False): - """Add ipv4/ipv6-geneve-bypass graph node for a given interface on - the specified VPP node. - - :param node: Topology node. - :param interface: Interface key from topology file of interface - to add geneve bypass node for. - :param is_ipv6: Enable ipv6-geneve-bypass graph node if True else enable - ipv4-geneve-bypass graph node. - :type node: dict - :type interface: str - :type is_ipv6: bool - """ - cmd = u"sw_interface_set_geneve_bypass" - args = dict( - is_ipv6=is_ipv6, - enable=True, - sw_if_index=Topology.get_interface_sw_index(node, interface) - ) - err_msg = ( - f"Failed to enable {u'ipv6' if is_ipv6 else u'ipv4'}-geneve-bypass " - f"on interface {interface} on host {node[u'host']}!" - ) - with PapiSocketExecutor(node) as papi_exec: - papi_exec.add(cmd, **args).get_reply(err_msg) - - @staticmethod - def show_geneve_tunnel_data(node): - """Show the GENEVE tunnels data. - - :param node: DUT node. - :type node: dict - """ - cmds = [ - u"geneve_tunnel_dump", - ] - PapiSocketExecutor.dump_and_log(node, cmds) diff --git a/resources/libraries/python/LispSetup.py b/resources/libraries/python/LispSetup.py index 6579764596..59cb1a808d 100644 --- a/resources/libraries/python/LispSetup.py +++ b/resources/libraries/python/LispSetup.py @@ -40,8 +40,8 @@ class LispEid: :type eid: str :type prefix_len: int """ - eid_addr = dict( - prefix=IPUtil.create_prefix_object(ip_address(eid), prefix_len) + eid_addr = dict(prefix=IPUtil.create_prefix_object( + ip_address(eid), prefix_len) ) if prefix_len else dict(mac=str(eid)) return dict( diff --git a/resources/libraries/python/VPPUtil.py b/resources/libraries/python/VPPUtil.py index a7ec44c974..c735494282 100644 --- a/resources/libraries/python/VPPUtil.py +++ b/resources/libraries/python/VPPUtil.py @@ -361,26 +361,3 @@ class VPPUtil: logger.trace(f"show threads:\n{threads_data}") return threads_data - - @staticmethod - def vpp_add_graph_node_next(node, graph_node_name, graph_next_name): - """Set the next node for a given node. - - :param node: Node to run command on. - :param graph_node_name: Graph node to add the next node on. - :param graph_next_name: Graph node to add as the next node. - :type node: dict - :type graph_node_name: str - :type graph_next_name: str - :returns: The index of the next node. - :rtype: int - """ - cmd = u"add_node_next" - args = dict( - node_name=graph_node_name, - next_name=graph_next_name - ) - with PapiSocketExecutor(node) as papi_exec: - reply = papi_exec.add(cmd, **args).get_reply() - - return reply[u"next_index"] diff --git a/resources/libraries/python/topology.py b/resources/libraries/python/topology.py index 2b930c08dc..338ccb6b57 100644 --- a/resources/libraries/python/topology.py +++ b/resources/libraries/python/topology.py @@ -174,7 +174,7 @@ class Topology: port_types = ( u"subinterface", u"vlan_subif", u"memif", u"tap", u"vhost", u"loopback", u"gre_tunnel", u"vxlan_tunnel", u"eth_bond", - u"eth_avf", u"eth_rdma", u"geneve_tunnel" + u"eth_avf", u"eth_rdma" ) for node_data in nodes.values(): diff --git a/resources/libraries/robot/ip/geneve.robot b/resources/libraries/robot/ip/geneve.robot deleted file mode 100644 index c9de91d708..0000000000 --- a/resources/libraries/robot/ip/geneve.robot +++ /dev/null @@ -1,74 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.GeneveUtil -| -| Documentation | Keywords for GENEVE tunnels in VPP. - -*** Keywords *** -| Initialize GENEVE L3 mode in circular topology -| | [Documentation] | Initialization of GENEVE L3 mode on DUT1. -| | -| | [Arguments] | ${with_bypass}=${False} -| | -| | Set interfaces in path up -| | -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | 24 -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0] -| | VPP Interface Set IP Address -| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | 24 -| | VPP Add IP Neighbor -| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] -| | ${next_index}= | VPP Add Graph Node Next -| | ... | ${dut1} | geneve4-input | ethernet-input -| | -| | ${src_ip_int} = | IP To Int | ${gen_tunnel.src_ip} -| | ${dst_ip_int} = | IP To Int | ${gen_tunnel.dst_ip} -| | ${if_ip_int} = | IP To Int | ${gen_tunnel.if_ip} -| | -| | FOR | ${nr} | IN RANGE | 0 | ${n_tunnels} -| | | ${src_ip} = | Int To IP | ${${src_ip_int} + ${nr} * 256} -| | | ${dst_ip} = | Int To IP | ${${dst_ip_int} + ${nr} * 256} -| | | ${if_ip} = | Int To IP | ${${if_ip_int} + ${nr} * 256} -| | | Vpp Route Add -| | | ... | ${dut1} | ${src_ip} | ${gen_tunnel.ip_mask} -| | | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0] -| | | ${tunnel_sw_index}= | Add Geneve Tunnel -| | | ... | ${dut1} | ${gen_tunnel.local} | ${gen_tunnel.remote} -| | | ... | ${${gen_tunnel.vni} + ${nr}} | l3_mode=${True} -| | | ... | next_index=${next_index} -| | | ${tunnel_if_key}= | Get Interface By SW Index -| | | ... | ${dut1} | ${tunnel_sw_index} -| | | ${tunnel_if_mac}= | Get Interface MAC -| | | ... | ${dut1} | ${tunnel_if_key} -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${tunnel_if_key} | ${if_ip} | 24 -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${tunnel_if_key} | ${dut1_if2_ip4} | ${DUT1_vf2_mac}[0] -| | | Vpp Route Add -| | | ... | ${dut1} | ${dst_ip} | ${gen_tunnel.ip_mask} -| | | ... | gateway=${dut1_if2_ip4} | interface=${tunnel_if_key} -| | | Vpp Route Add -| | | ... | ${dut1} | ${gen_tunnel.remote} | 32 -| | | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0] -| | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${tunnel_if_key} | ${gen_tunnel.local} | ${tunnel_if_mac} -| | | Vpp Route Add -| | | ... | ${dut1} | ${gen_tunnel.local} | 32 | gateway=${if_ip} -| | | Set Interface State -| | | ... | ${dut1} | ${tunnel_if_key} | up -| | END -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60} diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot index d6df417db1..c3d1e8a5ca 100644 --- a/resources/libraries/robot/shared/test_teardown.robot +++ b/resources/libraries/robot/shared/test_teardown.robot @@ -61,22 +61,30 @@ | | END | | Clean Sockets On All Nodes | ${nodes} -# Additional Test Tear Down Actions in alphabetical order -| Additional Test Tear Down Action For acl +| Additional Test Tear Down Action For performance | | [Documentation] -| | ... | Additional teardown for tests which uses ACL feature. +| | ... | Additional teardown for tests which uses performance measurement. +| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. | | -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Settings | ${dut1} -| | Run Keyword If Test Failed -| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} +| | ... | TODO: Document what test variables are required or optional. +| | +| | Run Keyword If Test Passed | Return From Keyword +| | ${use_latency} = | Get Use Latency +| | ${rate_for_teardown} = | Get Rate For Teardown +| | Call Resetter +| | Set Test Variable | \${extended_debug} | ${True} +| | Send traffic at specified rate +| | ... | trial_duration=${1.0} +| | ... | rate=${rate_for_teardown} +| | ... | trial_multiplicity=${1} +| | ... | use_latency=${use_latency} +| | ... | duration_limit=${1.0} -| Additional Test Tear Down Action For classify +| Additional Test Tear Down Action For packet_trace | | [Documentation] -| | ... | Additional teardown for tests which uses classify tables. +| | ... | Additional teardown for tests which uses packet trace. | | -| | Run Keyword If Test Failed -| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} +| | Show Packet Trace on All DUTs | ${nodes} | Additional Test Tear Down Action For container | | [Documentation] @@ -86,40 +94,42 @@ | | | Destroy all '${container_group}' containers | | END -| Additional Test Tear Down Action For det44 +| Additional Test Tear Down Action For vhost | | [Documentation] -| | ... | Additional teardown for tests which uses DET44 feature. +| | ... | Additional teardown for tests which uses vhost(s) and VM(s). | | -| | FOR | ${dut} | IN | @{duts} -| | | Run Keyword If Test Failed -| | | ... | Show DET44 verbose | ${nodes['${dut}']} -| | END +| | Show VPP vhost on all DUTs | ${nodes} +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs -| Additional Test Tear Down Action For geneve4 +| Additional Test Tear Down Action For vhost-pt | | [Documentation] -| | ... | Additional teardown for tests which uses GENEVE IPv4 tunnel. +| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). | | -| | FOR | ${dut} | IN | @{duts} -| | | Run Keyword If Test Failed -| | | ... | Show Geneve Tunnel Data | ${nodes['${dut}']} -| | END +| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Keyword Should Exist | vnf_manager.Kill All VMs +| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs -| Additional Test Tear Down Action For linux_bridge +| Additional Test Tear Down Action For det44 | | [Documentation] -| | ... | Additional teardown for tests which uses linux_bridge. +| | ... | Additional teardown for tests which uses DET44 feature. | | | | FOR | ${dut} | IN | @{duts} -| | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} +| | | Run Keyword If Test Failed +| | | ... | Show DET44 verbose | ${nodes['${dut}']} | | END -| Additional Test Tear Down Action For macipacl +| Additional Test Tear Down Action For nat-ed | | [Documentation] -| | ... | Additional teardown for tests which uses MACIP ACL feature. +| | ... | Additional teardown for tests which uses NAT feature. | | -| | Run Keyword If Test Failed -| | ... | Vpp Log Macip Acl Settings | ${dut1} -| | Run Keyword If Test Failed -| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} +| | FOR | ${dut} | IN | @{duts} +| | | Show NAT44 Config | ${nodes['${dut}']} +| | | Show NAT44 Summary | ${nodes['${dut}']} +| | | Show NAT Base Data | ${nodes['${dut}']} +| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} +| | END | Additional Test Tear Down Action For namespace | | [Documentation] @@ -129,41 +139,38 @@ | | | Clean Up Namespaces | ${nodes['${dut}']} | | END -| Additional Test Tear Down Action For nat-ed +| Additional Test Tear Down Action For linux_bridge | | [Documentation] -| | ... | Additional teardown for tests which uses NAT feature. +| | ... | Additional teardown for tests which uses linux_bridge. | | | | FOR | ${dut} | IN | @{duts} -| | | Show NAT44 Config | ${nodes['${dut}']} -| | | Show NAT44 Summary | ${nodes['${dut}']} -| | | Show NAT Base Data | ${nodes['${dut}']} -| | | Vpp Get Ip Table Summary | ${nodes['${dut}']} +| | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP} | | END -| Additional Test Tear Down Action For packet_trace +| Additional Test Tear Down Action For acl | | [Documentation] -| | ... | Additional teardown for tests which uses packet trace. +| | ... | Additional teardown for tests which uses ACL feature. | | -| | Show Packet Trace on All DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Settings | ${dut1} +| | Run Keyword If Test Failed +| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1} -| Additional Test Tear Down Action For performance +| Additional Test Tear Down Action For macipacl | | [Documentation] -| | ... | Additional teardown for tests which uses performance measurement. -| | ... | Optionally, call \${resetter} (if defined) to reset DUT state. +| | ... | Additional teardown for tests which uses MACIP ACL feature. | | -| | ... | TODO: Document what test variables are required or optional. +| | Run Keyword If Test Failed +| | ... | Vpp Log Macip Acl Settings | ${dut1} +| | Run Keyword If Test Failed +| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1} + +| Additional Test Tear Down Action For classify +| | [Documentation] +| | ... | Additional teardown for tests which uses classify tables. | | -| | Run Keyword If Test Passed | Return From Keyword -| | ${use_latency} = | Get Use Latency -| | ${rate_for_teardown} = | Get Rate For Teardown -| | Call Resetter -| | Set Test Variable | \${extended_debug} | ${True} -| | Send traffic at specified rate -| | ... | trial_duration=${1.0} -| | ... | rate=${rate_for_teardown} -| | ... | trial_multiplicity=${1} -| | ... | use_latency=${use_latency} -| | ... | duration_limit=${1.0} +| | Run Keyword If Test Failed +| | ... | Show Classify Tables Verbose on all DUTs | ${nodes} | Additional Test Tear Down Action For srv6 | | [Documentation] @@ -175,20 +182,3 @@ | | ... | Show SR Steering Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | | ... | Show SR LocalSIDs on all DUTs | ${nodes} - -| Additional Test Tear Down Action For vhost -| | [Documentation] -| | ... | Additional teardown for tests which uses vhost(s) and VM(s). -| | -| | Show VPP vhost on all DUTs | ${nodes} -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs - -| Additional Test Tear Down Action For vhost-pt -| | [Documentation] -| | ... | Additional teardown for tests which uses pci-passtrough and VM(s). -| | -| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Keyword Should Exist | vnf_manager.Kill All VMs -| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot index 08f579c9df..1f10787bc1 100644 --- a/resources/libraries/robot/shared/traffic.robot +++ b/resources/libraries/robot/shared/traffic.robot @@ -61,7 +61,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify headers \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify headers \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| | | @@ -120,7 +120,7 @@ | | ... | *Example:* | | | | ... | \| Packet transmission from port to port should fail \ -| | ... | \| \${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ +| | ... | \| ${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \ | | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \ | | ... | \| 08:00:27:ee:fd:b3 \| 08:00:27:7d:fd:10 \| | | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} @@ -150,7 +150,7 @@ | | ... | - dst_ip - Packet destination IP address. Type: string | | | | ... | *Example:* -| | ... | \| Send packet and verify marking \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \ | | ... | \| 192.168.122.1 \| | | @@ -190,9 +190,9 @@ | | ... | *Example:* | | | | ... | \| Send VXLAN encapsulated packet and verify received packet \ -| | ... | \| \${tg_node} \| port4 \| port4 \ +| | ... | \| ${tg_node} \| port4 \| port4 \ | | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \ -| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| \${102} \| +| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \| | | | | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if} | | ... | ${tx_src_mac} | ${tx_dst_mac} @@ -231,7 +231,7 @@ | | ... | *Example:* | | | | ... | \| Send ICMP echo request and verify answer \ -| | ... | \| \${nodes['TG']} \| eth2 \ +| | ... | \| ${nodes['TG']} \| eth2 \ | | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \ | | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \| | | @@ -270,14 +270,14 @@ | | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string | | | | ... | *Example:* -| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ | | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ -| | ... | \| \${1001} \| \00} \| 192.168.3.3 \| 192.168.4.4 \ -| | ... | \| 192.168.100.2 \| 192.168.100.3 \| +| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ +| | ... | \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -329,7 +329,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -373,14 +373,14 @@ | | ... | - dst_tun - Destination tunnel IP address. Type: string | | | | ... | *Example:* -| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \| -| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \| +| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \| +| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \| | | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \ -| | ... | \| sixteenbytes_key \| \${auth_alg} \| twentybytessecretkey \ -| | ... | \| \${1001} \| \${1000} \| 192.168.3.3 \| 192.168.4.4 \ -| | ... | \| 192.168.100.2 \| 192.168.100.3 \| +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \ +| | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \ +| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \ +| | ... | \| 192.168.100.3 \| | | | | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac} | | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg} @@ -429,7 +429,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP GPE encap \| \${nodes['TG']} \ +| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ | | ... | \| 10.0.0.1 \| 32.0.0.1 \ | | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ @@ -476,7 +476,7 @@ | | | | ... | *Example:* | | -| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \ +| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \ | | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ | | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \ | | ... | \| 10.0.1.2 \| @@ -529,7 +529,7 @@ | | | | ... | *Example:* | | ... | \| Send IPv6 Packet and verify SRv6 encapsulation in received packet\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ +| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \ | | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 2002:1:: \ | | ... | \| 2003:2:: \| 2003:1:: \| 2002:2:: \| decap=${False} \ | | ... | \| tg_dstsid3=2002:4:: \| dut_dstsid3=2003:4:: \ @@ -589,7 +589,7 @@ | | ... | *Example:* | | | | ... | \| Send TCP or UDP packet and verify network address translations \ -| | ... | \| \${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ +| | ... | \| ${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \ | | ... | \| 08:00:27:c9:6a:d5 \| 192.168.0.0 \| 68.142.68.0 \| 20.0.0.0 \ | | ... | \| TCP \| 1024 \| 8080 \| | | @@ -609,46 +609,3 @@ | | ... | --src_port_in ${src_port_in} | --src_port_out ${src_port_out} | | ... | --dst_port ${dst_port} | | Run Traffic Script On Node | nat.py | ${tg_node} | ${args} - -| Send IP packet and verify GENEVE encapsulation in received packets -| | [Documentation] | Send IP packet from TG to DUT. Receive GENEVE packet\ -| | ... | from DUT on TG and verify GENEVE encapsulation. Send GENEVE packet in\ -| | ... | opposite direction and verify received IP packet. -| | -| | ... | *Arguments:* -| | ... | - node - TG node. Type: dictionary -| | ... | - tx_interface - TG Interface 1. Type: string -| | ... | - rx_interface - TG Interface 2. Type: string -| | ... | - tx_dst_mac - Destination MAC for TX interface / DUT interface 1 MAC. -| | ... | Type: string -| | ... | - rx_src_mac - Source MAC for RX interface / DUT interface 2 MAC. -| | ... | Type: string -| | ... | - tun_local_ip - GENEVE tunnel source IP address. Type: string -| | ... | - tun_remote_ip - GENEVE tunnel destination IP address. Type: string -| | ... | - tun_vni - GENEVE tunnel VNI. Type: integer -| | ... | - tun_src_ip - Source IP address of original IP packet / inner source -| | ... | IP address of GENEVE packet. Type: string -| | ... | - tun_dst_ip - Destination IP address of original IP packet / inner -| | ... | destination IP address of GENEVE packet. Type: string -| | -| | ... | *Example:* -| | ... | \| Send IP packet and verify GENEVE encapsulation in received packets\ -| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 1.1.1.2 \| 1.1.1.1 \ -| | ... | \| 1 \| 10.128.1.0 \| 10.0.1.0 \| 24 \|11.0.1.2\| -| | -| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} -| | ... | ${tx_dst_mac} | ${rx_src_mac} | ${tun_local_ip} | ${tun_remote_ip} -| | ... | ${tun_vni} | ${tun_src_ip} | ${tun_dst_ip} -| | -| | ${tx_src_mac}= | Get Interface Mac | ${node} | ${tx_interface} -| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_interface} -| | ${rx_dst_mac}= | Get Interface Mac | ${node} | ${rx_interface} -| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_interface} -| | ${args}= | Catenate | --rx_if ${rx_if_name} | --tx_if ${tx_if_name} -| | ... | --tx_src_mac ${tx_src_mac} | --tx_dst_mac ${tx_dst_mac} -| | ... | --rx_src_mac ${rx_src_mac} | --rx_dst_mac ${rx_dst_mac} -| | ... | --tun_local_ip ${tun_local_ip} | --tun_remote_ip ${tun_remote_ip} -| | ... | --tun_vni ${tun_vni} | --tun_src_ip ${tun_src_ip} -| | ... | --tun_dst_ip ${tun_dst_ip} -| | Run Traffic Script On Node | geneve_tunnel.py | ${node} | ${args} diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot deleted file mode 100644 index fe20d6dd6d..0000000000 --- a/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot +++ /dev/null @@ -1,107 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/ip/geneve.robot -| Resource | resources/libraries/robot/shared/traffic.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | ETH | IP4FWD | IP4BASE | UDP | ENCAP | GENEVE -| ... | GENEVE_L3MODE | GENEVE4_1TUN | DRV_VFIO_PCI -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | ethip4--ethip4udpgeneve-1tun-ip4base -| -| Suite Setup | Setup suite topology interfaces | scapy -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace | geneve4 -| -| Test Template | Local Template -| -| Documentation | *L2BD with GENEVE L3 mode test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\ -| ... | routing over GENEVE tunnel. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\ -| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\ -| ... | DUT1 is tested with ${nic_name}. -| ... | *[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link\ -| ... | to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified\ -| ... | for correctness and its outer and inner IPv4 and MAC addresses, UDP\ -| ... | ports and GENEVE vni and protocol number. Then test\ -| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to\ -| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for\ -| ... | correctness and its IPv4 and MAC addresses -| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926. - -*** Variables *** -| @{plugins_to_enable}= | dpdk_plugin.so | geneve_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | vfio-pci -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 0 -| ${overhead}= | ${0} -# IP settings -| ${dut1_if1_ip4}= | 20.0.0.1 -| ${dut1_if2_ip4}= | 30.0.0.1 -| ${tg_if1_ip4}= | 20.0.0.2 -| ${tg_if2_ip4}= | 30.0.0.2 -# GENEVE settings -| ${gen_mode}= | L3 -| ${n_tunnels}= | ${1} -| &{gen_tunnel}= -| ... | local=1.1.1.2 | remote=1.1.1.1 | vni=${1} -| ... | src_ip=10.128.1.0 | dst_ip=10.0.1.0 | ip_mask=${24} | if_ip=11.0.1.2 - -*** Keywords *** -| Local Template -| | -| | [Documentation] -| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration. -| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. -| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\ -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize GENEVE L3 mode in circular topology -| | Then Send IP packet and verify GENEVE encapsulation in received packets -| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] -| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0] -| | ... | ${gen_tunnel}[local] | ${gen_tunnel}[remote] | ${gen_tunnel}[vni] -| | ... | ${gen_tunnel}[src_ip] | ${gen_tunnel}[dst_ip] -| | And Show Geneve Tunnel Data | ${nodes['DUT1']} - -*** Test Cases *** -| 64B-ethip4--ethip4udpgeneve-1tun-ip4base-dev -| | [Tags] | 64B -| | frame_size=${64} | phy_cores=${0} |