diff options
14 files changed, 1828 insertions, 41 deletions
diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py new file mode 100644 index 0000000000..667d4eccdc --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1000ip4dst1000.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.3.231.0 + - Destination IP address range: 20.0.0.0 - 20.3.231.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.3.231.0 + - Destination IP address range: 10.0.0.0 - 10.3.231.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.3.231.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.3.231.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.3.231.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.3.231.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py new file mode 100644 index 0000000000..8d0950caed --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src100ip4dst100.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.99.0 + - Destination IP address range: 20.0.0.0 - 20.0.99.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.99.0 + - Destination IP address range: 10.0.0.0 - 10.0.99.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.99.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.99.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.99.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.99.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py new file mode 100644 index 0000000000..77a2f845c6 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src1ip4dst1.py @@ -0,0 +1,95 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 + - Destination IP address range: 20.0.0.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 + - Destination IP address range: 10.0.0.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_ip = u"10.0.0.0" + self.p1_dst_ip = u"20.0.0.0" + + self.p2_src_ip = u"20.0.0.0" + self.p2_dst_ip = u"10.0.0.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_ip, + dst=self.p1_dst_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_ip, + dst=self.p2_dst_ip, + proto=61 + ) + ) + + return base_pkt_a, base_pkt_b, None, None + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py new file mode 100644 index 0000000000..59bf2054a0 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src2ip4dst2.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.1.0 + - Destination IP address range: 20.0.0.0 - 20.0.1.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.1.0 + - Destination IP address range: 10.0.0.0 - 10.0.1.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.1.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.1.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.1.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.1.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py new file mode 100644 index 0000000000..7eb661d610 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src4ip4dst4.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.3.0 + - Destination IP address range: 20.0.0.0 - 20.0.3.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.3.0 + - Destination IP address range: 10.0.0.0 - 10.0.3.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.3.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.3.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.3.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py new file mode 100644 index 0000000000..1db7715ca8 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-3n-ethip4-ip4src8ip4dst8.py @@ -0,0 +1,165 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / + - Direction 0 --> 1: + - Source IP address range: 10.0.0.0 - 10.0.7.0 + - Destination IP address range: 20.0.0.0 - 20.0.7.0 + - Direction 1 --> 0: + - Source IP address range: 20.0.0.0 - 20.0.7.0 + - Destination IP address range: 10.0.0.0 - 10.0.7.0 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"10.0.0.0" + self.p1_src_end_ip = u"10.0.7.0" + + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.7.0" + + self.p2_src_start_ip = u"20.0.0.0" + self.p2_src_end_ip = u"20.0.7.0" + + self.p2_dst_start_ip = u"10.0.0.0" + self.p2_dst_end_ip = u"10.0.7.0" + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=61 + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=61 + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p1_src_start_ip, + max_value=self.p1_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p1_dst_start_ip, + max_value=self.p1_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + # Direction 1 --> 0 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"ip_src", + min_value=self.p2_src_start_ip, + max_value=self.p2_src_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_src", + pkt_offset=u"IP.src" + ), + STLVmFlowVar( + name=u"ip_dst", + min_value=self.p2_dst_start_ip, + max_value=self.p2_dst_end_ip, + size=4, + step=256, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"ip_dst", + pkt_offset=u"IP.dst" + ), + STLVmFixIpv4( + offset=u"IP" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :returns: Traffic streams. + :rtype: Object + """ + return TrafficStreams() diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml index 10deb6e1f4..c7787539da 100644 --- a/resources/api/vpp/supported_crcs.yaml +++ b/resources/api/vpp/supported_crcs.yaml @@ -299,6 +299,8 @@ wireguard_interface_create_reply: '0x5383d31f' wireguard_peer_add: '0x9b8aad61' wireguard_peer_add_reply: '0x084a0cd3' + wg_set_async_mode: '0xa6465f7c' + wg_set_async_mode_reply: '0xe8d4e804' # Please keep alphabetic order. # Use bash command "env LC_COLLATE=C sort -u" if not clear. diff --git a/resources/libraries/python/WireGuardUtil.py b/resources/libraries/python/WireGuardUtil.py index d8d2396164..6e6237e7e7 100644 --- a/resources/libraries/python/WireGuardUtil.py +++ b/resources/libraries/python/WireGuardUtil.py @@ -68,7 +68,7 @@ class WireGuardUtil: :param node: VPP node to add config on. :param listen_port: WireGuard interface listen port. - :param wg_src: WireGuard srouce IPv4. + :param wg_src: WireGuard source IPv4. :param private_key: WireGuard interface private key :type node: dict :type listen_port: int @@ -118,12 +118,9 @@ class WireGuardUtil: :type keepalive_time: int """ endpoint_ip = ip_address(endpoint_ip) - wg_name = InterfaceUtil.vpp_get_interface_name( - node, sw_if_index=interface - ) cmd = u"wireguard_peer_add" - err_msg = f"Failed to add wireguard interface" \ - f"{wg_name} peer on host {node[u'host']}" + err_msg = f"Failed to add peer of wireguard interface" \ + f"{interface} on host {node[u'host']}" args = dict( peer=dict( public_key=peer_pubkey, @@ -139,6 +136,23 @@ class WireGuardUtil: papi_exec.add(cmd, **args).get_reply(err_msg) @staticmethod + def vpp_wireguard_set_async_mode(node, async_enable=1): + """Set wireguard async mode on or off. + + :param node: VPP node to set wireguard async mode. + :param async_enable: Async mode on or off. + :type node: dict + :type async_enable: int + """ + cmd = u"wg_set_async_mode" + err_msg = f"Failed to set wireguard async mode on host {node[u'host']}" + args = dict( + async_enable=async_enable + ) + with PapiSocketExecutor(node) as papi_exec: + papi_exec.add(cmd, **args).get_reply(err_msg) + + @staticmethod def _wireguard_create_tunnel_interface_on_dut( node, if1_key, if2_mac_addr, src_ip, peer_endpoint_ip, peer_allowed_ips, peer_n_allowed_ips, dut_wg_ip, port, @@ -162,11 +176,11 @@ class WireGuardUtil: :type nodes: dict :type if1_key: str :type if2_mac_addr: str - :type src_ip: src - :type peer_endpoint_ip: src + :type src_ip: str + :type peer_endpoint_ip: str :type peer_allowed_ips: list :type peer_n_allowed_ips: int - :type dut_wg_ip: src + :type dut_wg_ip: str :type port: int :type keepalive_time: int :type dut_private_key: bytes @@ -213,10 +227,10 @@ class WireGuardUtil: ) @staticmethod - def vpp_wireguard_create_tunnel_interface_on_duts( + def vpp_wireguard_create_tunnel_interfaces_on_duts( nodes, if1_key, if2_key, if1_ip_addr, if2_ip_addr, if1_mac_addr, if2_mac_addr, wg_if1_ip_addr, wg_if2_ip_addr, - n_allowed_ips, port, keepalive_time, raddr_ip1, raddr_ip2): + n_tunnels, port, keepalive_time, raddr_ip1, raddr_ip2): """Create WireGuard tunnel interfaces between two VPP nodes. :param nodes: VPP nodes to create tunnel interfaces. @@ -229,8 +243,7 @@ class WireGuardUtil: :param if2_mac_addr: VPP node2 interface mac address. :param wg_if1_ip_addr: VPP node 1 WireGuard interface IPv4 address. :param wg_if2_ip_addr: VPP node 2 WireGuard interface IPv4 address. - :param allowed_ips: WireGuard interface allowed ip list. - :param n_allowed_ips: Number of allowed ips. + :param n_tunnels: Number of wireguard tunnels. :param port: WireGuard interface listen port or Peer interface destination port. :param keepalive_time: WireGuard persistent keepalive time. @@ -247,32 +260,39 @@ class WireGuardUtil: :type if2_mac_addr: str :type wg_if1_ip_addr: str :type wg_if2_ip_addr: str - :type allowed_ips: str - :type n_allowed_ips: int + :type n_tunnels: int :type port: int :type keepalive_time: int :type raddr_ip1: str :type raddr_ip2: str """ - dut1_privatekey, dut1_pubkey = \ - WireGuardUtil.generate_wireguard_privatekey_and_pubkey() - dut2_privatekey, dut2_pubkey = \ - WireGuardUtil.generate_wireguard_privatekey_and_pubkey() - raddr_ip1 = ip_address(raddr_ip1) - raddr_ip2 = ip_address(raddr_ip2) - dut1_allowed_ips = \ - [IPUtil.create_prefix_object(raddr_ip2, 24),] - dut2_allowed_ips = \ - [IPUtil.create_prefix_object(raddr_ip1, 24),] - #Configure WireGuard interface on DUT1 - WireGuardUtil._wireguard_create_tunnel_interface_on_dut( - nodes[u'DUT1'], if1_key, if2_mac_addr, if1_ip_addr, if2_ip_addr, - dut1_allowed_ips, n_allowed_ips, wg_if1_ip_addr, port, - keepalive_time, dut1_privatekey, dut2_pubkey - ) - #Configure WireGuard interface on DUT2 - WireGuardUtil._wireguard_create_tunnel_interface_on_dut( - nodes[u'DUT2'], if2_key, if1_mac_addr, if2_ip_addr, if1_ip_addr, - dut2_allowed_ips, n_allowed_ips, wg_if2_ip_addr, port, - keepalive_time, dut2_privatekey, dut1_pubkey - ) + for i in range(n_tunnels): + if1_ipaddr = str(ip_address(if1_ip_addr) + i*256) + if2_ipaddr = str(ip_address(if2_ip_addr) + i*256) + wg_if1_ipaddr = str(ip_address(wg_if1_ip_addr) + i*256) + wg_if2_ipaddr = str(ip_address(wg_if2_ip_addr) + i*256) + + allowed_ipaddr1 = ip_address(raddr_ip1) + i*256 + allowed_ipaddr2 = ip_address(raddr_ip2) + i*256 + dut1_allowed_ips = \ + [IPUtil.create_prefix_object(allowed_ipaddr2, 24),] + dut2_allowed_ips = \ + [IPUtil.create_prefix_object(allowed_ipaddr1, 24),] + + dut1_privatekey, dut1_pubkey = \ + WireGuardUtil.generate_wireguard_privatekey_and_pubkey() + dut2_privatekey, dut2_pubkey = \ + WireGuardUtil.generate_wireguard_privatekey_and_pubkey() + + #Configure WireGuard interface on DUT1 + WireGuardUtil._wireguard_create_tunnel_interface_on_dut( + nodes[u'DUT1'], if1_key, if2_mac_addr, if1_ipaddr, if2_ipaddr, + dut1_allowed_ips, 1, wg_if1_ipaddr, port, + keepalive_time, dut1_privatekey, dut2_pubkey + ) + #Configure WireGuard interface on DUT2 + WireGuardUtil._wireguard_create_tunnel_interface_on_dut( + nodes[u'DUT2'], if2_key, if1_mac_addr, if2_ipaddr, if1_ipaddr, + dut2_allowed_ips, 1, wg_if2_ipaddr, port, + keepalive_time, dut2_privatekey, dut1_pubkey + ) diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..dec630fb09 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_1000 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard1000tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${1000} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard1000tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..8536ef2d62 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard100tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_100 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard100tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${100} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard100tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot index 13d95512cd..5f611a8ee2 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard1tnlsw-ip4base-ndrpdr.robot @@ -77,15 +77,15 @@ | ${dut2_if1_ip4}= | 200.0.0.2 | ${dut2_if2_ip4}= | 192.168.20.1 | ${tg_if2_ip4}= | 192.168.20.2 -| ${wg_if1_ip4}= | 192.168.110.1 -| ${wg_if2_ip4}= | 192.168.120.1 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 | ${raddr_ip4}= | 20.0.0.0 | ${laddr_ip4}= | 10.0.0.0 | ${n_tunnels}= | ${1} | ${listen_port}= | ${51820} | ${keepalive_time}= | ${256} # Traffic profile: -| ${traffic_profile}= | trex-stl-3n-ethip4-ip4dst${n_tunnels} +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} *** Keywords *** | Local Template @@ -111,7 +111,7 @@ | | When Initialize layer driver | ${nic_driver} | | And Initialize layer interface | | And Initialize WireGuard in 3-node circular topology -| | And VPP WireGuard Create Tunnel Interface On DUTs +| | And VPP WireGuard Create Tunnel Interfaces On DUTs | | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] | | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..05e642d1a1 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard2tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_2 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard2tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${2} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard2tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..48af908725 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard4tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_4 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard4tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${4} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard4tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot new file mode 100644 index 0000000000..1f321e0683 --- /dev/null +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4udpwireguard8tnlsw-ip4base-ndrpdr.robot @@ -0,0 +1,169 @@ +# Copyright (c) 2022 Intel and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/shared/default.robot +| Resource | resources/libraries/robot/wireguard/wireguard.robot +| +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_8 +| ... | IP4FWD | NIC_Intel-X710 | WIREGUARD | DRV_VFIO_PCI +| ... | RXQ_SIZE_0 | TXQ_SIZE_0 +| ... | ethip4udpwireguard8tnlsw-ip4base +| +| Suite Setup | Setup suite topology interfaces | performance +| Suite Teardown | Tear down suite | performance +| Test Setup | Setup test | performance +| Test Teardown | Tear down test | performance +| +| Test Template | Local Template +| +| Documentation | **RFC2544: Pkt throughput IPv4 WireGuard tunnel mode.** +| ... | +| ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \ +| ... | topology with single links between nodes. +| ... | +| ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 on TG-DUTn, \ +| ... | Eth-IPv4-UDP-WireGuard on DUT1-DUT2. +| ... | +| ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with \ +| ... | multiple WireGuard tunnels between them. DUTs get IPv4 traffic from TG, \ +| ... | and send to another DUT, where packets are decrypted and sent back \ +| ... | to TG. +| ... | +| ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \ +| ... | Drop Rate) with zero packet loss tolerance and throughput PDR \ +| ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \ +| ... | expressed in percentage of packets transmitted. NDR and PDR are \ +| ... | discovered for different Ethernet L2 frame sizes using MLRsearch \ +| ... | library. +| ... | Test packets are generated by TG on \ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups \ +| ... | (flow-group per direction, number of flows per flow-group equals to \ +| ... | number of WireGuard tunnels) with all packets \ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and \ +| ... | static payload. MAC addresses are matching MAC addresses of the TG \ +| ... | node interfaces. Incrementing of IP.src and IP.dst \ +| ... | are applied to both streams. +| ... | +| ... | - **[Ref] Applicable standard specifications:** RFC4303 and RFC2544. + + +*** Variables *** +| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so +| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so +| ... | wireguard_plugin.so | crypto_openssl_plugin.so +| ${crypto_type}= | ${None} +| ${nic_name}= | Intel-X710 +| ${nic_driver}= | vfio-pci +| ${nic_rxq_size}= | 0 +| ${nic_txq_size}= | 0 +| ${nic_pfs}= | 2 +| ${nic_vfs}= | 0 +| ${osi_layer}= | L3 +| ${overhead}= | ${60} +| ${tg_if1_ip4}= | 192.168.10.2 +| ${dut1_if1_ip4}= | 192.168.10.1 +| ${dut1_if2_ip4}= | 200.0.0.1 +| ${dut2_if1_ip4}= | 200.0.0.2 +| ${dut2_if2_ip4}= | 192.168.20.1 +| ${tg_if2_ip4}= | 192.168.20.2 +| ${wg_if1_ip4}= | 1.0.0.1 +| ${wg_if2_ip4}= | 1.0.0.2 +| ${raddr_ip4}= | 20.0.0.0 +| ${laddr_ip4}= | 10.0.0.0 +| ${n_tunnels}= | ${8} +| ${listen_port}= | ${51820} +| ${keepalive_time}= | ${256} +# Traffic profile: +| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src${n_tunnels}ip4dst${n_tunnels} + +*** Keywords *** +| Local Template +| | [Documentation] +| | ... | - **[Cfg]** DUT runs wireguard tunnel config. \ +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm. +| | +| | ... | *Arguments:* +| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | +| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} +| | +| | Set Test Variable | \${frame_size} +| | +| | Given Set Max Rate And Jumbo +| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} +| | And Pre-initialize layer driver | ${nic_driver} +| | And Apply startup configuration on all VPP DUTs +| | When Initialize layer driver | ${nic_driver} +| | And Initialize layer interface +| | And Initialize WireGuard in 3-node circular topology +| | And VPP WireGuard Create Tunnel Interfaces On DUTs +| | ... | ${nodes} | ${DUT1_${int}2}[0] | ${DUT2_${int}1}[0] +| | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${DUT1_${int}2_mac}[0] +| | ... | ${DUT2_${int}1_mac}[0] | ${wg_if1_ip4} | ${wg_if2_ip4} +| | ... | ${n_tunnels} | ${listen_port} | ${keepalive_time} +| | ... | ${laddr_ip4} | ${raddr_ip4} +| | Then Find NDR and PDR intervals using optimized search + +*** Test Cases *** +| 64B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 1C +| | frame_size=${64} | phy_cores=${1} + +| 64B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 2C +| | frame_size=${64} | phy_cores=${2} + +| 64B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 64B | 4C +| | frame_size=${64} | phy_cores=${4} + +| 1518B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 1C +| | frame_size=${1518} | phy_cores=${1} + +| 1518B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 2C +| | frame_size=${1518} | phy_cores=${2} + +| 1518B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 1518B | 4C +| | frame_size=${1518} | phy_cores=${4} + +| 9000B-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 1C +| | frame_size=${9000} | phy_cores=${1} + +| 9000B-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 2C +| | frame_size=${9000} | phy_cores=${2} + +| 9000B-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | 9000B | 4C +| | frame_size=${9000} | phy_cores=${4} + +| IMIX-1c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 1C +| | frame_size=IMIX_v4_1 | phy_cores=${1} + +| IMIX-2c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 2C +| | frame_size=IMIX_v4_1 | phy_cores=${2} + +| IMIX-4c-ethip4udpwireguard8tnlsw-ip4base-ndrpdr +| | [Tags] | IMIX | 4C +| | frame_size=IMIX_v4_1 | phy_cores=${4} |