diff options
14 files changed, 1561 insertions, 19 deletions
diff --git a/bootstrap-verify-perf.sh b/bootstrap-verify-perf.sh index 86714a7e0b..47c71b6fb1 100755 --- a/bootstrap-verify-perf.sh +++ b/bootstrap-verify-perf.sh @@ -226,6 +226,10 @@ case "$TEST_TAG" in 'mrrANDnic_intel-xl710AND1t1cANDipsechw' 'mrrANDnic_intel-xl710AND2t2cANDipsechw') ;; + VERIFY-PERF-SRV6 ) + TAGS=('mrrANDsrv6AND1t1c' + 'mrrANDsrv6AND2t2c') + ;; VPP-VERIFY-PERF-IP4 ) TAGS=('mrrANDnic_intel-x520-da2AND1t1cANDip4base' 'mrrANDnic_intel-x520-da2AND1t1cANDip4fwdANDfib_2m') @@ -264,6 +268,10 @@ case "$TEST_TAG" in 'mrrANDnic_intel-xl710AND1t1cANDipsechw' 'mrrANDnic_intel-xl710AND2t2cANDipsechw') ;; + VPP-VERIFY-PERF-SRV6 ) + TAGS=('mrrANDsrv6AND1t1c' + 'mrrANDsrv6AND2t2c') + ;; * ) TAGS=('perftest') esac diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index 8f1774e2f5..f42d9644fb 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -787,13 +787,13 @@ | | ... | | ... | *Arguments:* | | ... | - rate - Rate for sending packets. Type: string -| | ... | - framesize - L2 Frame Size [B]. Type: integer +| | ... | - framesize - L2 Frame Size [B]. Type: integer/string | | ... | - traffic_profile - Traffic profile. Type: string | | ... | | ... | *Example:* | | ... -| | ... | \| Tear down performance test with MACIP ACL \| 100000pps \| 64 \ -| | ... | \| ${traffic_profile} \| +| | ... | \| Tear down performance test with SRv6 with encapsulation \ +| | ... | \| 100000pps \| 64 \| ${traffic_profile} \| | | ... | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile} | | ... @@ -803,3 +803,18 @@ | | Run Keyword If Test Failed | | ... | Show SR Steering Policies on all DUTs | ${nodes} | | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes} + +| Tear down mrr test with SRv6 with encapsulation +| | [Documentation] | Common test teardown for mrr tests with SRv6 with \ +| | ... | encapsulation feature used. +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Tear down mrr test with SRv6 with encapsulation \| +| | ... +| | Remove All Added Ports On All DUTs From Topology | ${nodes} +| | Show VAT History On All DUTs | ${nodes} +| | Run Keyword If Test Failed | Show SR Policies on all DUTs | ${nodes} +| | Run Keyword If Test Failed +| | ... | Show SR Steering Policies on all DUTs | ${nodes} +| | Run Keyword If Test Failed | Show SR LocalSIDs on all DUTs | ${nodes} diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot new file mode 100644 index 0000000000..3a45f85ab8 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot @@ -0,0 +1,239 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ +| ... | one SID (SRH not inserted) test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-IPv6 on DUT1-DUT2, Eth-IPv6 on\ +| ... | TG-DUTn for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End - for other direction.\ +| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2002:2::1 +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dst_addr_nr}= | ${1} +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${prefix}= | ${64} +# outer IPv6 header: 40B +| ${srv6_overhead_nosrh}= | ${40} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_nosrh} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot index 311c3ef158..d6fbcc03ee 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot @@ -50,7 +50,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3. -| ... *** Variables *** # X520-DA2 bandwidth limit @@ -75,11 +74,13 @@ # outer IPv6 header: 40B | ${srv6_overhead_nosrh}= | ${40} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -90,7 +91,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '1' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot new file mode 100644 index 0000000000..1fab4390ae --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot @@ -0,0 +1,242 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ +| ... | two SIDs (SRH inserted) test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, Eth-IPv6\ +| ... | on TG-DUTn for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and two SR behaviours (functions) - End and End.DX6 - for\ +| ... | other direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ +| ... | by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2_1}= | 2003:2:: +| ${dut1_sid2_2}= | 2003:3:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1_1}= | 2002:2:: +| ${dut2_sid1_2}= | 2002:3:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2002:2::1 +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dst_addr_nr}= | ${1} +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 2 SIDs: 40+40B +| ${srv6_overhead_2sids}= | ${80} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_2sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot index 799a704d17..c12bff9f36 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot @@ -51,7 +51,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3. -| ... *** Variables *** # X520-DA2 bandwidth limit @@ -78,11 +77,13 @@ # outer IPv6 header + SRH with 2 SIDs: 40+40B | ${srv6_overhead_2sids}= | ${80} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -93,7 +94,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'with' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot new file mode 100644 index 0000000000..c22e727b60 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot @@ -0,0 +1,241 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | SRv6 +| ... +| Suite Setup | Set up 3-node performance topology with DUT's NIC model +| ... | L3 | Intel-X520-DA2 +| Suite Teardown | Tear down 3-node performance topology +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ +| ... | two SIDs (SRH inserted) without decapsulation test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| ... | DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End - for other direction.\ +| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2_1}= | 2003:2:: +| ${dut1_sid2_2}= | 2003:3:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1_1}= | 2002:2:: +| ${dut2_sid1_2}= | 2002:3:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2002:2::1 +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dst_addr_nr}= | ${1} +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 2 SIDs: 40+40B +| ${srv6_overhead_2sids}= | ${80} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_2sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot index beb7ccad17..d563109b4a 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot @@ -50,8 +50,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3. -| ... - *** Variables *** # X520-DA2 bandwidth limit @@ -78,11 +76,13 @@ # outer IPv6 header + SRH with 2 SIDs: 40+40B | ${srv6_overhead_2sids}= | ${80} # Traffic profile: -| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -93,7 +93,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding over SRv6 with encapsulation with '2' x SID 'without' decapsulation in 3-node circular topology diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot new file mode 100644 index 0000000000..2895b45f50 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot @@ -0,0 +1,266 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | SRv6_PROXY_DYN | MEMIF | LXC +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L3 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance test suite with Dynamic SRv6 proxy +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ +| ... | Dynamic SRv6 proxy test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End.AD - for other\ +| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ +| ... | by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2003:1::1 +| ${out_sid1_1}= | 2002:3:: +| ${out_sid1_2}= | 2002:4:: +| ${out_sid2_1}= | 2003:3:: +| ${out_sid2_2}= | 2003:4:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut1-memif-1-if1_ip6}= | 3001:1::1 +| ${dut1-memif-1-if2_ip6}= | 3001:1::2 +| ${dut1_nh}= | 4002:: +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${dut2-memif-1-if1_ip6}= | 3002:1::1 +| ${dut2-memif-1-if2_ip6}= | 3002:1::2 +| ${dut2_nh}= | 4001:: +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${srv6_overhead_3sids}= | ${96} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | LXC +| ${container_image}= | ${EMPTY} +| ${container_install_dkms}= | ${FALSE} +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${rxq} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_3sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot index 0c1b93b7d3..01495b2a0b 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot @@ -57,7 +57,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. -| ... *** Variables *** # X520-DA2 bandwidth limit @@ -104,7 +103,9 @@ *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | Set Test Variable | ${rxq} @@ -116,7 +117,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot new file mode 100644 index 0000000000..41b3c31647 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot @@ -0,0 +1,266 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | SRv6_PROXY_MASQ | MEMIF | LXC +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L3 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance test suite with Masquerading SRv6 proxy +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Raw results for Segment routing over IPv6 dataplane with\ +| ... | Masquerading SRv6 proxy test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\ +| ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End.AM - for other\ +| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ +| ... | by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2003:1::1 +| ${out_sid1_1}= | 2002:3:: +| ${out_sid1_2}= | 2002:4:: +| ${out_sid2_1}= | 2003:3:: +| ${out_sid2_2}= | 2003:4:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut1-memif-1-if1_ip6}= | 3001:1::1 +| ${dut1-memif-1-if2_ip6}= | 3001:1::2 +| ${dut1_nh}= | 4002:: +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${dut2-memif-1-if1_ip6}= | 3002:1::1 +| ${dut2-memif-1-if2_ip6}= | 3002:1::2 +| ${dut2_nh}= | 4001:: +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${srv6_overhead_3sids}= | ${96} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | LXC +| ${container_image}= | ${EMPTY} +| ${container_install_dkms}= | ${FALSE} +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${rxq} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_3sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot index 798875fb15..f71e305ba0 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot @@ -57,7 +57,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. -| ... *** Variables *** # X520-DA2 bandwidth limit @@ -104,7 +103,9 @@ *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | Set Test Variable | ${rxq} @@ -116,7 +117,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot new file mode 100644 index 0000000000..87c240ae72 --- /dev/null +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot @@ -0,0 +1,266 @@ +# Copyright (c) 2018 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance/performance_setup.robot +| ... +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR +| ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY +| ... | SRv6_PROXY_STAT | MEMIF | LXC +| ... +| Suite Setup | Run Keywords +| ... | Set up 3-node performance topology with DUT's NIC model | L3 +| ... | Intel-X520-DA2 +| ... | AND | Set up performance test suite with MEMIF +| ... | AND | Set up performance test suite with Static SRv6 proxy +| ... | AND | Set up performance topology with containers +| ... +| Suite Teardown | Tear down 3-node performance topology with container +| ... +| Test Setup | Set up performance test +| ... +| Test Teardown | Tear down mrr test with SRv6 with encapsulation +| ... +| Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ +| ... | Static SRv6 proxy test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\ +| ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\ +| ... | routing and static route, SR policy and steering policy for one\ +| ... | direction and one SR behaviour (function) - End.AS - for other\ +| ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\ +| ... | by Intel. +| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\ +| ... | at line rate and reports total received/sent packets over trial period.\ +| ... | Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with\ +| ... | all packets containing Ethernet header,IPv6 header with static payload.\ +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ +| ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. + +*** Variables *** +# X520-DA2 bandwidth limit +| ${s_limit}= | ${10000000000} +# SIDs +| ${dut1_sid1}= | 2002:1:: +| ${dut1_sid2}= | 2003:2:: +| ${dut1_bsid}= | 2002:1::1 +| ${dut2_sid1}= | 2002:2:: +| ${dut2_sid2}= | 2003:1:: +| ${dut2_bsid}= | 2003:1::1 +| ${out_sid1_1}= | 2002:3:: +| ${out_sid1_2}= | 2002:4:: +| ${out_sid2_1}= | 2003:3:: +| ${out_sid2_2}= | 2003:4:: +| ${sid_prefix}= | ${64} +# IP settings +| ${tg_if1_ip6_subnet}= | 2001:1:: +| ${tg_if2_ip6_subnet}= | 2001:2:: +| ${dut1_if1_ip6}= | 2001:1::1 +| ${dut1_if2_ip6}= | 2001:3::1 +| ${dut1-memif-1-if1_ip6}= | 3001:1::1 +| ${dut1-memif-1-if2_ip6}= | 3001:1::2 +| ${dut1_nh}= | 4002:: +| ${dut2_if1_ip6}= | 2001:3::2 +| ${dut2_if2_ip6}= | 2001:2::1 +| ${dut2-memif-1-if1_ip6}= | 3002:1::1 +| ${dut2-memif-1-if2_ip6}= | 3002:1::2 +| ${dut2_nh}= | 4001:: +| ${prefix}= | ${64} +# outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B +| ${srv6_overhead_3sids}= | ${96} +# Traffic profile: +| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 +# LXC container +| ${container_count}= | ${1} +| ${container_engine}= | LXC +| ${container_image}= | ${EMPTY} +| ${container_install_dkms}= | ${FALSE} +# CPU settings +| ${system_cpus}= | ${1} +| ${vpp_cpus}= | ${5} +| ${container_cpus}= | ${5} + +*** Keywords *** +| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | ... +| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... +| | # Test Variables required for test teardown +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${rxq} +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | ${max_rate}= | Calculate pps | ${s_limit} +| | ... | ${get_framesize} + ${srv6_overhead_3sids} +| | ... +| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | And Add PCI devices to DUTs in 3-node single link topology +| | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology +| | Then Traffic should pass with maximum rate | ${perf_trial_duration} +| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} + +*** Test Cases *** +| tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${78} + +| tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${1518} + +| tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=${9000} + +| tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 1T1C | STHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=1 | rxq=1 | framesize=IMIX_v4_1 + +| tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${78} + +| tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${1518} + +| tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=${9000} + +| tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 2T2C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=2 | rxq=1 | framesize=IMIX_v4_1 + +| tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 78B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${78} + +| tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 1518B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${1518} + +| tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ +| | ... | throughput test. +| | ... +| | [Tags] | 9000B | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=${9000} + +| tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ +| | ... | throughput test. +| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) +| | ... +| | [Tags] | IMIX | 4T4C | MTHREAD +| | ... +| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | wt=4 | rxq=2 | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot index fe0cbe2375..050b90697f 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot @@ -57,7 +57,6 @@ | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\ | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01. -| ... *** Variables *** # X520-DA2 bandwidth limit @@ -104,7 +103,9 @@ *** Keywords *** | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| | ... | | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | Set Test Variable | ${rxq} @@ -116,7 +117,6 @@ | | ${threshold}= | Set Variable | ${min_rate} | | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology | | And Add PCI devices to DUTs in 3-node single link topology -| | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs |