diff options
| -rw-r--r-- | tests/perf/Bridge_Domain_Intel-X520-DA2.robot | 114 | ||||
| -rw-r--r-- | tests/perf/Bridge_Domain_Intel-X710-DA2.robot (renamed from tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot) | 112 | ||||
| -rw-r--r-- | tests/perf/Bridge_Domain_Intel-XL710.robot | 222 | ||||
| -rw-r--r-- | tests/perf/Long_Bridge_Domain_Intel-XL710.robot | 258 |
4 files changed, 414 insertions, 292 deletions
diff --git a/tests/perf/Bridge_Domain_Intel-X520-DA2.robot b/tests/perf/Bridge_Domain_Intel-X520-DA2.robot index ab5eac4c93..ab1703053f 100644 --- a/tests/perf/Bridge_Domain_Intel-X520-DA2.robot +++ b/tests/perf/Bridge_Domain_Intel-X520-DA2.robot @@ -55,19 +55,16 @@ *** Keywords *** | L2 Bridge Domain NDR Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find NDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps. | append=True | | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo | | Add PCI devices to DUTs from 3-node single link topology -| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | L2 bridge domain initialized in a 3-node circular topology | | Find NDR using binary search and pps @@ -76,21 +73,16 @@ | L2 Bridge Domain PDR Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True -| | Set Test Documentation | LT=${glob_loss_acceptance} | append=True -| | Set Test Documentation | ${glob_loss_acceptance_type}. | append=True | | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo | | Add PCI devices to DUTs from 3-node single link topology -| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | L2 bridge domain initialized in a 3-node circular topology | | Find PDR using binary search and pps @@ -102,89 +94,179 @@ | TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${64} | ${100000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC02: 64B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${64} | ${100000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${1518} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC04: 1518B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${1518} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC05: 9000B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${9000} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC06: 9000B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${9000} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC07: 64B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${64} | ${100000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC08: 64B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${64} | ${100000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC09: 1518B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${1518} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC10: 1518B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${1518} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC11: 9000B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${9000} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC12: 9000B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${9000} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC13: 64B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${64} | ${100000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC14: 64B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${64} | ${100000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC15: 1518B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${1518} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC16: 1518B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${1518} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC17: 9000B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${9000} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC18: 9000B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${9000} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search diff --git a/tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot b/tests/perf/Bridge_Domain_Intel-X710-DA2.robot index 70a5d85178..2dc66362d0 100644 --- a/tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot +++ b/tests/perf/Bridge_Domain_Intel-X710-DA2.robot @@ -55,22 +55,16 @@ *** Keywords *** | L2 Bridge Domain NDR Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find NDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps. | append=True | | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo | | Add PCI devices to DUTs from 3-node single link topology -| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | L2 bridge domain initialized in a 3-node circular topology | | Find NDR using binary search and pps @@ -79,24 +73,16 @@ | L2 Bridge Domain PDR Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True -| | Set Test Documentation | LT=${glob_loss_acceptance} | append=True -| | Set Test Documentation | ${glob_loss_acceptance_type}. | append=True | | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo | | Add PCI devices to DUTs from 3-node single link topology -| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs | | L2 bridge domain initialized in a 3-node circular topology | | Find PDR using binary search and pps @@ -108,89 +94,179 @@ | TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${64} | ${100000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC02: 64B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${64} | ${100000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${1518} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC04: 1518B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${1518} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC05: 9000B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${9000} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC06: 9000B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | ... | ${9000} | ${10000} | 1 | 1 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC07: 64B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${64} | ${100000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC08: 64B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${64} | ${100000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC09: 1518B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${1518} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC10: 1518B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${1518} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC11: 9000B NDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${9000} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC12: 9000B PDR binary search - DUT L2BD - 2thread 2core 1rxq | | ... | ${9000} | ${10000} | 2 | 1 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC13: 64B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${64} | ${100000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC14: 64B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${64} | ${100000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 100kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC15: 1518B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${1518} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC16: 1518B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${1518} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | TC17: 9000B NDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${9000} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | TC18: 9000B PDR binary search - DUT L2BD - 4thread 4core 2rxq | | ... | ${9000} | ${10000} | 4 | 2 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ +| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search diff --git a/tests/perf/Bridge_Domain_Intel-XL710.robot b/tests/perf/Bridge_Domain_Intel-XL710.robot new file mode 100644 index 0000000000..edefb2cada --- /dev/null +++ b/tests/perf/Bridge_Domain_Intel-XL710.robot @@ -0,0 +1,222 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Library | resources.libraries.python.NodePath +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG +| ... | NIC_Intel-XL710 +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L2 | Intel-XL710 +| Suite Teardown | 3-node Performance Suite Teardown +| Test Setup | Setup all DUTs before test +| Test Teardown | Run Keywords +| ... | Run Keyword If Test Failed +| ... | Traffic should pass with no loss | 10 +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | fail_on_loss=${False} +| ... | AND | Remove startup configuration of VPP from all DUTs +| ... | AND | Show vpp trace dump on all DUTs +| Documentation | *RFC2544: Pkt throughput L2BD test cases* +| ... +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\ +| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC\ +| ... | XL710-DA2 by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\ +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\ +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\ +| ... | of packets transmitted. NDR and PDR are discovered for different\ +| ... | Ethernet L2 frame sizes using either binary search or linear search\ +| ... | algorithms with configured starting rate and final step that determines\ +| ... | throughput measurement resolution. Test packets are generated by TG on\ +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\ +| ... | (flow-group per direction, 253 flows per flow-group) with all packets\ +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\ +| ... | payload. MAC addresses are matching MAC addresses of the TG node\ +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. + +*** Variables *** +#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +| ${s_24.5G} | ${24500000000} +#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +| ${s_18.75Mpps} | ${18750000} + +*** Keywords *** +| L2 Bridge Domain NDR Binary Search BW limit +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo +| | Add PCI devices to DUTs from 3-node single link topology +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs +| | Apply startup configuration on all VPP DUTs +| | L2 bridge domain initialized in a 3-node circular topology +| | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| L2 Bridge Domain NDR Binary Search +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${max_rate}= | Set Variable | ${s_limit} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo +| | Add PCI devices to DUTs from 3-node single link topology +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs +| | Apply startup configuration on all VPP DUTs +| | L2 bridge domain initialized in a 3-node circular topology +| | Find NDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} + +| L2 Bridge Domain PDR Binary Search BW limit +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo +| | Add PCI devices to DUTs from 3-node single link topology +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs +| | Apply startup configuration on all VPP DUTs +| | L2 bridge domain initialized in a 3-node circular topology +| | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} + +| L2 Bridge Domain PDR Binary Search +| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} +| | Set Test Variable | ${framesize} +| | Set Test Variable | ${min_rate} +| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} +| | ${binary_min}= | Set Variable | ${min_rate} +| | ${binary_max}= | Set Variable | ${max_rate} +| | ${threshold}= | Set Variable | ${min_rate} +| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo +| | Add PCI devices to DUTs from 3-node single link topology +| | ${get_framesize}= | Get Frame Size | ${framesize} +| | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs +| | Apply startup configuration on all VPP DUTs +| | L2 bridge domain initialized in a 3-node circular topology +| | Find PDR using binary search and pps +| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge +| | ... | ${min_rate} | ${max_rate} | ${threshold} +| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} + +*** Test Cases *** +| TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq +| | ... | ${64} | ${100000} | 1 | 1 | ${s_18.75Mpps} +| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ +| | ... | 18.75Mpps rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search + +| TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq +| | ... | ${1518} | ${10000} | 1 | 1 | ${s_24.5G} +| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at\ +| | ... | 24.5G rate, step 10kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit + +| TC07: 64B NDR binary search - DUT L2BD - 2thread 2core 1rxq +| | ... | ${64} | ${100000} | 2 | 1 | ${s_18.75Mpps} +| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ +| | ... | 18.75Mpps rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search + +| TC09: 1518B NDR binary search - DUT L2BD - 2thread 2core 1rxq +| | ... | ${1518} | ${10000} | 2 | 1 | ${s_24.5G} +| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ +| | ... | 24.5G rate, step 10kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit + +| TC13: 64B NDR binary search - DUT L2BD - 4thread 4core 2rxq +| | ... | ${64} | ${100000} | 4 | 2 | ${s_18.75Mpps} +| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at\ +| | ... | 18.75Mpps rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search + +| TC15: 1518B NDR binary search - DUT L2BD - 4thread 4core 2rxq +| | ... | ${1518} | ${10000} | 4 | 2 | ${s_24.5G} +| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at\ +| | ... | 24.5G rate, step 10kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit + +| TC19: IMIX_v4_1 NDR binary search - DUT L2BD - 1thread 1core 1rxq +| | ... | IMIX_v4_1 | ${100000} | 1 | 1 | ${s_24.5G} +| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ +| | ... | 24.5G rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit + +| TC20: IMIX_v4_1 NDR binary search - DUT L2BD - 2thread 2core 1rxq +| | ... | IMIX_v4_1 | ${100000} | 2 | 1 | ${s_24.5G} +| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ +| | ... | 24.5G rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit + +| TC21: IMIX_v4_1 NDR binary search - DUT L2BD - 4thread 4core 2rxq +| | ... | IMIX_v4_1 | ${100000} | 4 | 2 | ${s_24.5G} +| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port. +| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at\ +| | ... | 24.5G rate, step 100kpps. +| | [Template] | L2 Bridge Domain NDR Binary Search BW limit diff --git a/tests/perf/Long_Bridge_Domain_Intel-XL710.robot b/tests/perf/Long_Bridge_Domain_Intel-XL710.robot deleted file mode 100644 index a1b64b424a..0000000000 --- a/tests/perf/Long_Bridge_Domain_Intel-XL710.robot +++ /dev/null @@ -1,258 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance.robot -| Library | resources.libraries.python.NodePath -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG -| ... | NIC_Intel-XL710 -| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model -| ... | L2 | Intel-XL710 -| Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *RFC2544: Pkt throughput L2BD test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- -| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC -| ... | XL710-DA2 by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static -| ... | payload. MAC addresses are matching MAC addresses of the TG node -| ... | interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Variables *** -#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps -| ${s_24.5G} | ${24500000000} -#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps -| ${s_18.75Mpps} | ${18750000} - -*** Test Cases *** -| TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 18.75Mpps rate, step 100kpps. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 24.5G rate, step 10kpps. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC07: 64B NDR binary search - DUT L2BD - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 18.75Mpps rate, step 100kpps. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC09: 1518B NDR binary search - DUT L2BD - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 24.5G rate, step 10kpps. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC13: 64B NDR binary search - DUT L2BD - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 18.75Mpps rate, step 100kpps. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Set Variable | ${s_18.75Mpps} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC15: 1518B NDR binary search - DUT L2BD - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 24.5G rate, step 10kpps. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC19: IMIX_v4_1 NDR binary search - DUT L2BD - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size -| | ... | using binary search start at 24.5G rate, step 100kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | IMIX_v4_1 -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC20: IMIX_v4_1 NDR binary search - DUT L2BD - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size -| | ... | using binary search start at 24.5G rate, step 100kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | IMIX_v4_1 -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC21: IMIX_v4_1 NDR binary search - DUT L2BD - 4thread 4core 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 thread, 4 phy core, \ -| | ... | 2 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size -| | ... | using binary search start at 24.5G rate, step 100kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | IMIX_v4_1 -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_24.5G} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-bridge -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} |