aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--GPL/traffic_scripts/PacketVerifier.py5
-rw-r--r--GPL/traffic_scripts/geneve_tunnel.py348
-rw-r--r--GPL/traffic_scripts/vxlan.py1
-rw-r--r--docs/tag_documentation.rst12
-rw-r--r--resources/api/vpp/supported_crcs.yaml8
-rw-r--r--resources/libraries/python/GeneveUtil.py126
-rw-r--r--resources/libraries/python/LispSetup.py4
-rw-r--r--resources/libraries/python/VPPUtil.py23
-rw-r--r--resources/libraries/python/topology.py2
-rw-r--r--resources/libraries/robot/ip/geneve.robot74
-rw-r--r--resources/libraries/robot/shared/test_teardown.robot136
-rw-r--r--resources/libraries/robot/shared/traffic.robot91
-rw-r--r--tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot107
13 files changed, 845 insertions, 92 deletions
diff --git a/GPL/traffic_scripts/PacketVerifier.py b/GPL/traffic_scripts/PacketVerifier.py
index c915921625..bb91b9361c 100644
--- a/GPL/traffic_scripts/PacketVerifier.py
+++ b/GPL/traffic_scripts/PacketVerifier.py
@@ -331,9 +331,10 @@ def create_gratuitous_arp_request(src_mac, src_ip):
def auto_pad(packet):
"""Pads zeroes at the end of the packet if the total packet length is less
- then 64 bytes in case of IPv4 or 78 bytes in case of IPv6.
+ then 60 bytes in case of IPv4 or 78 bytes in case of IPv6.
"""
- min_len = 78 if packet.haslayer(IPv6) else 64
+ # TODO: add document explaining deduction of FCS part
+ min_len = 78 if packet.haslayer(IPv6) else 60
pad_layer = Raw if packet.haslayer(Raw) \
else Padding if packet.haslayer(Padding) else None
if pad_layer:
diff --git a/GPL/traffic_scripts/geneve_tunnel.py b/GPL/traffic_scripts/geneve_tunnel.py
new file mode 100644
index 0000000000..2fec3b0ac6
--- /dev/null
+++ b/GPL/traffic_scripts/geneve_tunnel.py
@@ -0,0 +1,348 @@
+#!/usr/bin/env python3
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+#
+# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
+#
+# Licensed under the Apache License 2.0 or
+# GNU General Public License v2.0 or later; you may not use this file
+# except in compliance with one of these Licenses. You
+# may obtain a copy of the Licenses at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
+#
+# Note: If this file is linked with Scapy, which is GPLv2+, your use of it
+# must be under GPLv2+. If at any point in the future it is no longer linked
+# with Scapy (or other GPLv2+ licensed software), you are free to choose
+# Apache 2.
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic script for GENEVE tunnel verification."""
+
+import sys
+
+from ipaddress import ip_address
+from scapy.contrib.geneve import GENEVE
+from scapy.layers.inet import IP, UDP
+from scapy.layers.inet6 import IPv6, ICMPv6ND_NS
+from scapy.layers.l2 import Ether
+from scapy.packet import Raw
+
+from .PacketVerifier import RxQueue, TxQueue
+from .TrafficScriptArg import TrafficScriptArg
+
+
+def check_geneve(
+ pkt_recv, ip_layer, outer_src_mac, outer_dst_mac, inner_src_mac,
+ inner_dst_mac, outer_src_ip, outer_dst_ip, inner_src_ip, inner_dst_ip,
+ udp_dport, gen_vni):
+ """Check received GENEVE packet.
+
+ :param pkt_recv: Received packet to verify.
+ :param ip_layer: Scapy IP or IPv6 layer.
+ :param outer_src_mac: Outer source MAC address.
+ :param outer_dst_mac: Outer destination MAC address.
+ :param inner_src_mac: Inner source MAC address.
+ :param inner_dst_mac: Inner destination MAC address.
+ :param outer_src_ip: Outer source IP/IPv6 address.
+ :param outer_dst_ip: Outer destination IP/IPv6 address.
+ :param inner_src_ip: Inner source IP/IPv6 address.
+ :param inner_dst_ip: Inner destination IP/IPv6 address.
+ :param udp_dport: UDP destination port.
+ :param gen_vni: GENEVE VNI.
+ :type pkt_recv: scapy.Ether
+ :type ip_layer: scapy.layers.inet.IP or scapy.layers.inet6.IPv6
+ :type outer_src_mac: str
+ :type outer_dst_mac: str
+ :type inner_src_mac: str
+ :type inner_dst_mac: str
+ :type outer_src_ip: str
+ :type outer_dst_ip: str
+ :type inner_src_ip: str
+ :type inner_dst_ip: str
+ :type udp_dport: int
+ :type gen_vni: int
+ :raises RuntimeError: If received packet is invalid.
+ """
+ try:
+ if not isinstance(pkt_recv[0], Ether):
+ raise RuntimeError(
+ f"Received packet hasn't outer Ether layer: {pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[1], ip_layer):
+ raise RuntimeError(
+ f"Received packet hasn't outer {ip_layer.__name__} layer: "
+ f"{pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[2], UDP):
+ raise RuntimeError(
+ f"Received packet hasn't UDP layer: {pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[3], GENEVE):
+ raise RuntimeError(
+ f"Received packet hasn't GENEVE layer: {pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[4], Ether):
+ raise RuntimeError(
+ f"Received packet hasn't inner Ether layer: {pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[5], ip_layer):
+ raise RuntimeError(
+ f"Received packet hasn't inner {ip_layer.__name__} layer: "
+ f"{pkt_recv!r}"
+ )
+ elif not isinstance(pkt_recv[6], Raw):
+ raise RuntimeError(
+ f"Received packet hasn't inner Raw layer: {pkt_recv!r}"
+ )
+ except IndexError:
+ raise RuntimeError(
+ f"Received packet doesn't contain all layers: {pkt_recv!r}"
+ )
+
+ if pkt_recv[Ether].src != outer_src_mac:
+ raise RuntimeError(
+ f"Received frame has invalid outer source MAC address: "
+ f"{pkt_recv[Ether].src} should be: {outer_src_mac}"
+ )
+
+ if pkt_recv[Ether].dst != outer_dst_mac:
+ raise RuntimeError(
+ f"Received frame has invalid outer destination MAC address: "
+ f"{pkt_recv[Ether].dst} should be: {outer_dst_mac}"
+ )
+
+ if pkt_recv[ip_layer].src != outer_src_ip:
+ raise RuntimeError(
+ f"Received packet has invalid outer source address: "
+ f"{pkt_recv[ip_layer].src} should be: {outer_src_ip}"
+ )
+
+ if pkt_recv[ip_layer].dst != outer_dst_ip:
+ raise RuntimeError(
+ f"Received packet has invalid outer destination address: "
+ f"{pkt_recv[ip_layer].dst} should be: {outer_dst_ip}"
+ )
+
+ if pkt_recv[UDP].dport != udp_dport:
+ raise RuntimeError(
+ f"Received packet has invalid UDP dport: "
+ f"{pkt_recv[UDP].dport} should be: {udp_dport}"
+ )
+
+ if pkt_recv[GENEVE].vni != gen_vni:
+ raise RuntimeError(
+ f"Received packet has invalid GENEVE vni: "
+ f"{pkt_recv[GENEVE].vni} should be: {gen_vni}"
+ )
+
+ if pkt_recv[GENEVE].proto != 0x6558:
+ raise RuntimeError(
+ f"Received packet has invalid GENEVE protocol number: "
+ f"{pkt_recv[GENEVE].proto} should be: 0x6558"
+ )
+
+ if pkt_recv[Ether:2].src != inner_src_mac:
+ raise RuntimeError(
+ f"Received frame has invalid inner source MAC address: "
+ f"{pkt_recv[Ether:2].src} should be: {inner_src_mac}"
+ )
+
+ if pkt_recv[Ether:2].dst != inner_dst_mac:
+ raise RuntimeError(
+ f"Received frame has invalid inner destination MAC address: "
+ f"{pkt_recv[Ether:2].dst} should be: {inner_dst_mac}"
+ )
+
+ if pkt_recv[ip_layer:2].src != inner_src_ip:
+ raise RuntimeError(
+ f"Received packet has invalid inner source address: "
+ f"{pkt_recv[ip_layer:2].src} should be: {inner_src_ip}"
+ )
+
+ if pkt_recv[ip_layer:2].dst != inner_dst_ip:
+ raise RuntimeError(
+ f"Received packet has invalid inner destination address: "
+ f"{pkt_recv[ip_layer:2].dst} should be: {inner_dst_ip}"
+ )
+
+
+def check_ip(pkt_recv, ip_layer, src_mac, dst_mac, src_ip, dst_ip):
+ """Check received IP/IPv6 packet.
+
+ :param pkt_recv: Received packet to verify.
+ :param ip_layer: Scapy IP layer.
+ :param src_mac: Source MAC address.
+ :param dst_mac: Destination MAC address.
+ :param src_ip: Source IP/IPv6 address.
+ :param dst_ip: Destination IP/IPv6 address.
+ :type pkt_recv: scapy.Ether
+ :type ip_layer: scapy.layers.inet.IP or scapy.layers.inet6.IPv6
+ :type src_mac: str
+ :type dst_mac: str
+ :type src_ip: str
+ :type dst_ip: str
+ :raises RuntimeError: If received packet is invalid.
+ """
+ if pkt_recv[Ether].src != src_mac:
+ raise RuntimeError(
+ f"Received frame has invalid source MAC address: "
+ f"{pkt_recv[Ether].src} should be: {src_mac}"
+ )
+
+ if pkt_recv[Ether].dst != dst_mac:
+ raise RuntimeError(
+ f"Received frame has invalid destination MAC address: "
+ f"{pkt_recv[Ether].dst} should be: {dst_mac}"
+ )
+
+ if not pkt_recv.haslayer(ip_layer):
+ raise RuntimeError(
+ f"Not an {ip_layer.__name__} packet received: {pkt_recv!r}"
+ )
+
+ if pkt_recv[ip_layer].dst != dst_ip:
+ raise RuntimeError(
+ f"Received packet has invalid destination {ip_layer.__name__} "
+ f"address: {pkt_recv[ip_layer.__name__].dst} should be: {dst_ip}"
+ )
+
+ if pkt_recv[ip_layer].src != src_ip:
+ raise RuntimeError(
+ f"Received packet has invalid destination {ip_layer.__name__} "
+ f"address: {pkt_recv[ip_layer.__name__].dst} should be: {src_ip}"
+ )
+
+ if ip_layer == IP and pkt_recv[ip_layer].proto != 61:
+ raise RuntimeError(
+ f"Received packet has invalid IP protocol: "
+ f"{pkt_recv[ip_layer].proto} should be: 61"
+ )
+
+
+def main():
+ """Send and receive GENEVE packets."""
+
+ args = TrafficScriptArg(
+ [
+ u"tx_src_mac", u"tx_dst_mac", u"rx_src_mac", u"rx_dst_mac",
+ u"tun_local_ip", u"tun_remote_ip", u"tun_vni", u"tun_src_ip",
+ u"tun_dst_ip"
+ ]
+ )
+
+ tx_txq = TxQueue(args.get_arg(u"tx_if"))
+ tx_rxq = RxQueue(args.get_arg(u"tx_if"))
+ rx_txq = TxQueue(args.get_arg(u"rx_if"))
+ rx_rxq = RxQueue(args.get_arg(u"rx_if"))
+
+ rx_src_mac = args.get_arg(u"rx_src_mac")
+ rx_dst_mac = args.get_arg(u"rx_dst_mac")
+ tx_src_mac = args.get_arg(u"tx_src_mac")
+ tx_dst_mac = args.get_arg(u"tx_dst_mac")
+
+ tun_local_ip = args.get_arg(u"tun_local_ip")
+ tun_remote_ip = args.get_arg(u"tun_remote_ip")
+ tun_vni = args.get_arg(u"tun_vni")
+ tun_src_ip = args.get_arg(u"tun_src_ip")
+ tun_dst_ip = args.get_arg(u"tun_dst_ip")
+
+ geneve_tunnel_mac = u"d0:0b:ee:d0:00:00"
+ geneve_udp_dport = 6081
+
+ tx_sent_packets = list()
+ src_ip = ip_address(tun_src_ip)
+ dst_ip = ip_address(tun_dst_ip)
+ ip_layer = IP if src_ip.version == 4 else IPv6
+ tx_ip_pkt = ip_layer(src=src_ip, dst=dst_ip, proto=61) \
+ if ip_layer == IP else ip_layer(src=src_ip, dst=dst_ip)
+ tx_pkt_send = (Ether(src=tx_src_mac, dst=tx_dst_mac) / tx_ip_pkt)
+ tx_pkt_send /= Raw()
+ size_limit = 78 if ip_layer == IPv6 else 60
+ if len(tx_pkt_send) < size_limit:
+ tx_pkt_send[Raw].load += b"\0" * (size_limit - len(tx_pkt_send))
+
+ tx_sent_packets.append(tx_pkt_send)
+ tx_txq.send(tx_pkt_send)
+
+ while True:
+ rx_pkt_recv = rx_rxq.recv(2)
+
+ if rx_pkt_recv is None:
+ raise RuntimeError(f"GENEVE packet Rx timeout")
+
+ if rx_pkt_recv.haslayer(ICMPv6ND_NS):
+ # read another packet in the queue if the current one is ICMPv6ND_NS
+ continue
+ else:
+ # otherwise process the current packet
+ break
+
+ check_geneve(
+ rx_pkt_recv, ip_layer, rx_src_mac, rx_dst_mac, geneve_tunnel_mac,
+ rx_src_mac, tun_local_ip, tun_remote_ip, str(src_ip), str(dst_ip),
+ geneve_udp_dport, int(tun_vni)
+ )
+
+ rx_inner_ip_pkt = IP(
+ src=rx_pkt_recv[Ether:2][IP].dst,
+ dst=rx_pkt_recv[Ether:2][IP].src,
+ proto=61
+ ) if isinstance(rx_pkt_recv[Ether:2][1], IP) else IPv6(
+ src=rx_pkt_recv[Ether:2][IPv6].dst,
+ dst=rx_pkt_recv[Ether:2][IPv6].src
+ )
+ rx_inner_ip_pkt /= Raw()
+ rx_inner_pkt = (
+ Ether(src=rx_pkt_recv[4].dst, dst=rx_pkt_recv[4].src) /
+ rx_inner_ip_pkt
+ )
+ size_limit = 78 if isinstance(rx_pkt_recv[Ether:2][1], IPv6) else 60
+ if len(rx_inner_pkt) < size_limit:
+ rx_inner_pkt[Raw].load += b"\0" * (size_limit - len(rx_inner_pkt))
+
+ rx_outer_ip_pkt = IP(
+ src=rx_pkt_recv[Ether:1][IP].dst,
+ dst=rx_pkt_recv[Ether:1][IP].src
+ ) if isinstance(rx_pkt_recv[Ether:1][1], IP) else IPv6(
+ src=rx_pkt_recv[Ether:1][IPv6].dst,
+ dst=rx_pkt_recv[Ether:1][IPv6].src
+ )
+ rx_pkt_send = (
+ Ether(src=rx_pkt_recv[Ether:1].dst, dst=rx_pkt_recv[Ether:1].src) /
+ rx_outer_ip_pkt /
+ UDP(sport=6081, dport=6081) /
+ GENEVE(vni=rx_pkt_recv[GENEVE].vni) /
+ rx_inner_pkt
+ )
+ rx_txq.send(rx_pkt_send)
+
+ while True:
+ tx_pkt_recv = tx_rxq.recv(2, ignore=tx_sent_packets)
+ ip_layer = IP
+
+ if tx_pkt_recv is None:
+ raise RuntimeError(f"{ip_layer.__name__} packet Rx timeout")
+
+ if tx_pkt_recv.haslayer(ICMPv6ND_NS):
+ # read another packet in the queue if the current one is ICMPv6ND_NS
+ continue
+ else:
+ # otherwise process the current packet
+ break
+
+ check_ip(
+ tx_pkt_recv, ip_layer, tx_dst_mac, tx_src_mac, str(dst_ip), str(src_ip)
+ )
+
+ sys.exit(0)
+
+
+if __name__ == u"__main__":
+ main()
diff --git a/GPL/traffic_scripts/vxlan.py b/GPL/traffic_scripts/vxlan.py
index 985784d6f5..33e5c7adff 100644
--- a/GPL/traffic_scripts/vxlan.py
+++ b/GPL/traffic_scripts/vxlan.py
@@ -37,5 +37,6 @@ class VXLAN(Packet):
def mysummary(self):
return self.sprintf(f"VXLAN (vni={VXLAN.vni})")
+
bind_layers(UDP, VXLAN, dport=4789)
bind_layers(VXLAN, Ether)
diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst
index c37df8508b..a2d9f8466f 100644
--- a/docs/tag_documentation.rst
+++ b/docs/tag_documentation.rst
@@ -219,6 +219,10 @@ Scaling Tags
usually with 63 flow differing in source port number. Could be UDP or TCP.
If NAT is used, the clients are inside. Outside IP range can differ.
+.. topic:: GENEVE4_1TUN
+
+ Test with 1 GENEVE IPv4 tunnel.
+
Test Category Tags
------------------
@@ -587,6 +591,14 @@ Encapsulation Tags
All SRv6 test cases with two SIDs and without decapsulation.
+.. topic:: GENEVE
+
+ All test cases with GENEVE.
+
+.. topic:: GENEVE_L3MODE
+
+ All test cases with GENEVE tunnel in L3 mode.
+
Interface Tags
--------------
diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml
index 2d25a42dfa..7b5a718c29 100644
--- a/resources/api/vpp/supported_crcs.yaml
+++ b/resources/api/vpp/supported_crcs.yaml
@@ -43,6 +43,8 @@
# 6x^ tc01-64B-1c-ethip4udp-ip4base-iacl1sf-10kflows-mrr
# tc01-64B-1c-ethip4udp-ip4base-iacl1sl-10kflows-mrr
# ^^ ip4fwdANDiaclANDacl10AND100_flows
+ add_node_next: '0x2457116d' # dev
+ add_node_next_reply: '0x2ed75f32' # dev
avf_create: '0xdaab8ae2' # dev
avf_create_reply: '0x5383d31f' # dev
bond_create: '0x48883c7e' # perf
@@ -90,6 +92,10 @@
det44_session_dump: '0xe45a3af7' # perf teardown
# TODO: Which test to run to verify det44_* messages?
# dhcp_proxy_dump / details # honeycomb
+ geneve_add_del_tunnel2: '0x8c2a9999' # dev
+ geneve_add_del_tunnel2_reply: '0x5383d31f' # dev
+ geneve_tunnel_details: '0xe27e2748' # dev
+ geneve_tunnel_dump: '0xf9e6675e' # dev
gpe_enable_disable: '0xc264d7bf' # dev
gpe_enable_disable_reply: '0xe8d4e804' # dev
# gre_tunnel_add_del / reply # unused L1 keyword: create_gre_tunnel_interface
@@ -249,6 +255,8 @@
# ^ dot1qANDl2bdmaclrnANDbaseANDmemif
sw_interface_set_flags: '0x6a2b491a' # dev
sw_interface_set_flags_reply: '0xe8d4e804' # dev
+ sw_interface_set_geneve_bypass: '0x65247409' # dev
+ sw_interface_set_geneve_bypass_reply: '0xe8d4e804' # dev
sw_interface_set_l2_bridge: '0x2e483cd0' # dev
sw_interface_set_l2_bridge_reply: '0xe8d4e804' # dev
sw_interface_set_l2_xconnect: '0x1aaa2dbb' # dev
diff --git a/resources/libraries/python/GeneveUtil.py b/resources/libraries/python/GeneveUtil.py
new file mode 100644
index 0000000000..3c8ebeebb3
--- /dev/null
+++ b/resources/libraries/python/GeneveUtil.py
@@ -0,0 +1,126 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""VPP GENEVE Plugin utilities library."""
+
+from ipaddress import ip_address
+
+from resources.libraries.python.Constants import Constants
+from resources.libraries.python.InterfaceUtil import InterfaceUtil
+from resources.libraries.python.IPAddress import IPAddress
+from resources.libraries.python.PapiExecutor import PapiSocketExecutor
+from resources.libraries.python.topology import Topology
+
+
+class GeneveUtil:
+ """VPP GENEVE Plugin Keywords."""
+
+ @staticmethod
+ def add_geneve_tunnel(
+ node, local_address, remote_address, vni, multicast_if=None,
+ encap_vrf=0, l3_mode=False, next_index=None):
+ """Add GENEVE tunnel on the specified VPP node.
+
+ :param node: Topology node.
+ :param local_address: Local IP address.
+ :param remote_address: Remote IP address.
+ :param vni: Virtual network ID.
+ :param multicast_if: Interface key of multicast interface; used only if
+ remote is multicast. (Default value = None)
+ :param encap_vrf: The FIB ID for sending unicast GENEVE encap packets or
+ receiving multicast packets. (Default value = 0)
+ :param l3_mode: Use geneve tunnel in L3 mode (ip routing) if Tue else in
+ L2 mode (L2 switching). (Default value = False)
+ :param next_index: The index of the next node.
+ :type node: dict
+ :type local_address: str
+ :type remote_address: str
+ :type vni: int
+ :type multicast_if: str
+ :type encap_vrf: int
+ :type l3_mode: bool
+ :type next_index: int
+ :returns: SW interface index of created geneve tunnel.
+ :rtype: int
+ """
+ cmd = u"geneve_add_del_tunnel2"
+ args = dict(
+ is_add=True,
+ local_address=IPAddress.create_ip_address_object(
+ ip_address(local_address)
+ ),
+ remote_address=IPAddress.create_ip_address_object(
+ ip_address(remote_address)
+ ),
+ mcast_sw_if_index=Topology.get_interface_sw_index(
+ node, multicast_if
+ ) if multicast_if else Constants.BITWISE_NON_ZERO,
+ encap_vrf_id=int(encap_vrf),
+ decap_next_index=next_index if l3_mode
+ else Constants.BITWISE_NON_ZERO,
+ vni=int(vni),
+ l3_mode=l3_mode
+ )
+ err_msg = f"Failed to configure GENEVE tunnel on host {node[u'host']}!"
+ with PapiSocketExecutor(node) as papi_exec:
+ sw_if_index = papi_exec.add(cmd, **args).get_sw_if_index(err_msg)
+
+ if_key = Topology.add_new_port(node, u"geneve_tunnel")
+ Topology.update_interface_sw_if_index(node, if_key, sw_if_index)
+
+ ifc_name = InterfaceUtil.vpp_get_interface_name(node, sw_if_index)
+ Topology.update_interface_name(node, if_key, ifc_name)
+
+ ifc_mac = InterfaceUtil.vpp_get_interface_mac(node, sw_if_index)
+ Topology.update_interface_mac_address(node, if_key, ifc_mac)
+
+ return sw_if_index
+
+ @staticmethod
+ def enable_interface_geneve_bypass(node, interface, is_ipv6=False):
+ """Add ipv4/ipv6-geneve-bypass graph node for a given interface on
+ the specified VPP node.
+
+ :param node: Topology node.
+ :param interface: Interface key from topology file of interface
+ to add geneve bypass node for.
+ :param is_ipv6: Enable ipv6-geneve-bypass graph node if True else enable
+ ipv4-geneve-bypass graph node.
+ :type node: dict
+ :type interface: str
+ :type is_ipv6: bool
+ """
+ cmd = u"sw_interface_set_geneve_bypass"
+ args = dict(
+ is_ipv6=is_ipv6,
+ enable=True,
+ sw_if_index=Topology.get_interface_sw_index(node, interface)
+ )
+ err_msg = (
+ f"Failed to enable {u'ipv6' if is_ipv6 else u'ipv4'}-geneve-bypass "
+ f"on interface {interface} on host {node[u'host']}!"
+ )
+ with PapiSocketExecutor(node) as papi_exec:
+ papi_exec.add(cmd, **args).get_reply(err_msg)
+
+ @staticmethod
+ def show_geneve_tunnel_data(node):
+ """Show the GENEVE tunnels data.
+
+ :param node: DUT node.
+ :type node: dict
+ """
+ cmds = [
+ u"geneve_tunnel_dump",
+ ]
+ PapiSocketExecutor.dump_and_log(node, cmds)
diff --git a/resources/libraries/python/LispSetup.py b/resources/libraries/python/LispSetup.py
index 59cb1a808d..6579764596 100644
--- a/resources/libraries/python/LispSetup.py
+++ b/resources/libraries/python/LispSetup.py
@@ -40,8 +40,8 @@ class LispEid:
:type eid: str
:type prefix_len: int
"""
- eid_addr = dict(prefix=IPUtil.create_prefix_object(
- ip_address(eid), prefix_len)
+ eid_addr = dict(
+ prefix=IPUtil.create_prefix_object(ip_address(eid), prefix_len)
) if prefix_len else dict(mac=str(eid))
return dict(
diff --git a/resources/libraries/python/VPPUtil.py b/resources/libraries/python/VPPUtil.py
index c735494282..a7ec44c974 100644
--- a/resources/libraries/python/VPPUtil.py
+++ b/resources/libraries/python/VPPUtil.py
@@ -361,3 +361,26 @@ class VPPUtil:
logger.trace(f"show threads:\n{threads_data}")
return threads_data
+
+ @staticmethod
+ def vpp_add_graph_node_next(node, graph_node_name, graph_next_name):
+ """Set the next node for a given node.
+
+ :param node: Node to run command on.
+ :param graph_node_name: Graph node to add the next node on.
+ :param graph_next_name: Graph node to add as the next node.
+ :type node: dict
+ :type graph_node_name: str
+ :type graph_next_name: str
+ :returns: The index of the next node.
+ :rtype: int
+ """
+ cmd = u"add_node_next"
+ args = dict(
+ node_name=graph_node_name,
+ next_name=graph_next_name
+ )
+ with PapiSocketExecutor(node) as papi_exec:
+ reply = papi_exec.add(cmd, **args).get_reply()
+
+ return reply[u"next_index"]
diff --git a/resources/libraries/python/topology.py b/resources/libraries/python/topology.py
index 338ccb6b57..2b930c08dc 100644
--- a/resources/libraries/python/topology.py
+++ b/resources/libraries/python/topology.py
@@ -174,7 +174,7 @@ class Topology:
port_types = (
u"subinterface", u"vlan_subif", u"memif", u"tap", u"vhost",
u"loopback", u"gre_tunnel", u"vxlan_tunnel", u"eth_bond",
- u"eth_avf", u"eth_rdma"
+ u"eth_avf", u"eth_rdma", u"geneve_tunnel"
)
for node_data in nodes.values():
diff --git a/resources/libraries/robot/ip/geneve.robot b/resources/libraries/robot/ip/geneve.robot
new file mode 100644
index 0000000000..c9de91d708
--- /dev/null
+++ b/resources/libraries/robot/ip/geneve.robot
@@ -0,0 +1,74 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.GeneveUtil
+|
+| Documentation | Keywords for GENEVE tunnels in VPP.
+
+*** Keywords ***
+| Initialize GENEVE L3 mode in circular topology
+| | [Documentation] | Initialization of GENEVE L3 mode on DUT1.
+| |
+| | [Arguments] | ${with_bypass}=${False}
+| |
+| | Set interfaces in path up
+| |
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | 24
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0]
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | 24
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0]
+| | ${next_index}= | VPP Add Graph Node Next
+| | ... | ${dut1} | geneve4-input | ethernet-input
+| |
+| | ${src_ip_int} = | IP To Int | ${gen_tunnel.src_ip}
+| | ${dst_ip_int} = | IP To Int | ${gen_tunnel.dst_ip}
+| | ${if_ip_int} = | IP To Int | ${gen_tunnel.if_ip}
+| |
+| | FOR | ${nr} | IN RANGE | 0 | ${n_tunnels}
+| | | ${src_ip} = | Int To IP | ${${src_ip_int} + ${nr} * 256}
+| | | ${dst_ip} = | Int To IP | ${${dst_ip_int} + ${nr} * 256}
+| | | ${if_ip} = | Int To IP | ${${if_ip_int} + ${nr} * 256}
+| | | Vpp Route Add
+| | | ... | ${dut1} | ${src_ip} | ${gen_tunnel.ip_mask}
+| | | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0]
+| | | ${tunnel_sw_index}= | Add Geneve Tunnel
+| | | ... | ${dut1} | ${gen_tunnel.local} | ${gen_tunnel.remote}
+| | | ... | ${${gen_tunnel.vni} + ${nr}} | l3_mode=${True}
+| | | ... | next_index=${next_index}
+| | | ${tunnel_if_key}= | Get Interface By SW Index
+| | | ... | ${dut1} | ${tunnel_sw_index}
+| | | ${tunnel_if_mac}= | Get Interface MAC
+| | | ... | ${dut1} | ${tunnel_if_key}
+| | | VPP Interface Set IP Address
+| | | ... | ${dut1} | ${tunnel_if_key} | ${if_ip} | 24
+| | | VPP Add IP Neighbor
+| | | ... | ${dut1} | ${tunnel_if_key} | ${dut1_if2_ip4} | ${DUT1_vf2_mac}[0]
+| | | Vpp Route Add
+| | | ... | ${dut1} | ${dst_ip} | ${gen_tunnel.ip_mask}
+| | | ... | gateway=${dut1_if2_ip4} | interface=${tunnel_if_key}
+| | | Vpp Route Add
+| | | ... | ${dut1} | ${gen_tunnel.remote} | 32
+| | | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0]
+| | | VPP Add IP Neighbor
+| | | ... | ${dut1} | ${tunnel_if_key} | ${gen_tunnel.local} | ${tunnel_if_mac}
+| | | Vpp Route Add
+| | | ... | ${dut1} | ${gen_tunnel.local} | 32 | gateway=${if_ip}
+| | | Set Interface State
+| | | ... | ${dut1} | ${tunnel_if_key} | up
+| | END
+| | All VPP Interfaces Ready Wait | ${nodes} | retries=${60}
diff --git a/resources/libraries/robot/shared/test_teardown.robot b/resources/libraries/robot/shared/test_teardown.robot
index c3d1e8a5ca..d6df417db1 100644
--- a/resources/libraries/robot/shared/test_teardown.robot
+++ b/resources/libraries/robot/shared/test_teardown.robot
@@ -61,30 +61,22 @@
| | END
| | Clean Sockets On All Nodes | ${nodes}
-| Additional Test Tear Down Action For performance
+# Additional Test Tear Down Actions in alphabetical order
+| Additional Test Tear Down Action For acl
| | [Documentation]
-| | ... | Additional teardown for tests which uses performance measurement.
-| | ... | Optionally, call \${resetter} (if defined) to reset DUT state.
-| |
-| | ... | TODO: Document what test variables are required or optional.
+| | ... | Additional teardown for tests which uses ACL feature.
| |
-| | Run Keyword If Test Passed | Return From Keyword
-| | ${use_latency} = | Get Use Latency
-| | ${rate_for_teardown} = | Get Rate For Teardown
-| | Call Resetter
-| | Set Test Variable | \${extended_debug} | ${True}
-| | Send traffic at specified rate
-| | ... | trial_duration=${1.0}
-| | ... | rate=${rate_for_teardown}
-| | ... | trial_multiplicity=${1}
-| | ... | use_latency=${use_latency}
-| | ... | duration_limit=${1.0}
+| | Run Keyword If Test Failed
+| | ... | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword If Test Failed
+| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
-| Additional Test Tear Down Action For packet_trace
+| Additional Test Tear Down Action For classify
| | [Documentation]
-| | ... | Additional teardown for tests which uses packet trace.
+| | ... | Additional teardown for tests which uses classify tables.
| |
-| | Show Packet Trace on All DUTs | ${nodes}
+| | Run Keyword If Test Failed
+| | ... | Show Classify Tables Verbose on all DUTs | ${nodes}
| Additional Test Tear Down Action For container
| | [Documentation]
@@ -94,23 +86,6 @@
| | | Destroy all '${container_group}' containers
| | END
-| Additional Test Tear Down Action For vhost
-| | [Documentation]
-| | ... | Additional teardown for tests which uses vhost(s) and VM(s).
-| |
-| | Show VPP vhost on all DUTs | ${nodes}
-| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Keyword Should Exist | vnf_manager.Kill All VMs
-| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs
-
-| Additional Test Tear Down Action For vhost-pt
-| | [Documentation]
-| | ... | Additional teardown for tests which uses pci-passtrough and VM(s).
-| |
-| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error
-| | ... | Keyword Should Exist | vnf_manager.Kill All VMs
-| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs
-
| Additional Test Tear Down Action For det44
| | [Documentation]
| | ... | Additional teardown for tests which uses DET44 feature.
@@ -120,23 +95,13 @@
| | | ... | Show DET44 verbose | ${nodes['${dut}']}
| | END
-| Additional Test Tear Down Action For nat-ed
+| Additional Test Tear Down Action For geneve4
| | [Documentation]
-| | ... | Additional teardown for tests which uses NAT feature.
+| | ... | Additional teardown for tests which uses GENEVE IPv4 tunnel.
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Show NAT44 Config | ${nodes['${dut}']}
-| | | Show NAT44 Summary | ${nodes['${dut}']}
-| | | Show NAT Base Data | ${nodes['${dut}']}
-| | | Vpp Get Ip Table Summary | ${nodes['${dut}']}
-| | END
-
-| Additional Test Tear Down Action For namespace
-| | [Documentation]
-| | ... | Additional teardown for tests which uses namespace.
-| |
-| | FOR | ${dut} | IN | @{duts}
-| | | Clean Up Namespaces | ${nodes['${dut}']}
+| | | Run Keyword If Test Failed
+| | | ... | Show Geneve Tunnel Data | ${nodes['${dut}']}
| | END
| Additional Test Tear Down Action For linux_bridge
@@ -147,15 +112,6 @@
| | | Linux Del Bridge | ${nodes['${dut}']} | ${bid_TAP}
| | END
-| Additional Test Tear Down Action For acl
-| | [Documentation]
-| | ... | Additional teardown for tests which uses ACL feature.
-| |
-| | Run Keyword If Test Failed
-| | ... | Vpp Log Plugin Acl Settings | ${dut1}
-| | Run Keyword If Test Failed
-| | ... | Vpp Log Plugin Acl Interface Assignment | ${dut1}
-
| Additional Test Tear Down Action For macipacl
| | [Documentation]
| | ... | Additional teardown for tests which uses MACIP ACL feature.
@@ -165,12 +121,49 @@
| | Run Keyword If Test Failed
| | ... | Vpp Log Macip Acl Interface Assignment | ${dut1}
-| Additional Test Tear Down Action For classify
+| Additional Test Tear Down Action For namespace
| | [Documentation]
-| | ... | Additional teardown for tests which uses classify tables.
+| | ... | Additional teardown for tests which uses namespace.
| |
-| | Run Keyword If Test Failed
-| | ... | Show Classify Tables Verbose on all DUTs | ${nodes}
+| | FOR | ${dut} | IN | @{duts}
+| | | Clean Up Namespaces | ${nodes['${dut}']}
+| | END
+
+| Additional Test Tear Down Action For nat-ed
+| | [Documentation]
+| | ... | Additional teardown for tests which uses NAT feature.
+| |
+| | FOR | ${dut} | IN | @{duts}
+| | | Show NAT44 Config | ${nodes['${dut}']}
+| | | Show NAT44 Summary | ${nodes['${dut}']}
+| | | Show NAT Base Data | ${nodes['${dut}']}
+| | | Vpp Get Ip Table Summary | ${nodes['${dut}']}
+| | END
+
+| Additional Test Tear Down Action For packet_trace
+| | [Documentation]
+| | ... | Additional teardown for tests which uses packet trace.
+| |
+| | Show Packet Trace on All DUTs | ${nodes}
+
+| Additional Test Tear Down Action For performance
+| | [Documentation]
+| | ... | Additional teardown for tests which uses performance measurement.
+| | ... | Optionally, call \${resetter} (if defined) to reset DUT state.
+| |
+| | ... | TODO: Document what test variables are required or optional.
+| |
+| | Run Keyword If Test Passed | Return From Keyword
+| | ${use_latency} = | Get Use Latency
+| | ${rate_for_teardown} = | Get Rate For Teardown
+| | Call Resetter
+| | Set Test Variable | \${extended_debug} | ${True}
+| | Send traffic at specified rate
+| | ... | trial_duration=${1.0}
+| | ... | rate=${rate_for_teardown}
+| | ... | trial_multiplicity=${1}
+| | ... | use_latency=${use_latency}
+| | ... | duration_limit=${1.0}
| Additional Test Tear Down Action For srv6
| | [Documentation]
@@ -182,3 +175,20 @@
| | ... | Show SR Steering Policies on all DUTs | ${nodes}
| | Run Keyword If Test Failed
| | ... | Show SR LocalSIDs on all DUTs | ${nodes}
+
+| Additional Test Tear Down Action For vhost
+| | [Documentation]
+| | ... | Additional teardown for tests which uses vhost(s) and VM(s).
+| |
+| | Show VPP vhost on all DUTs | ${nodes}
+| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Keyword Should Exist | vnf_manager.Kill All VMs
+| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs
+
+| Additional Test Tear Down Action For vhost-pt
+| | [Documentation]
+| | ... | Additional teardown for tests which uses pci-passtrough and VM(s).
+| |
+| | ${vnf_status} | ${value}= | Run Keyword And Ignore Error
+| | ... | Keyword Should Exist | vnf_manager.Kill All VMs
+| | Run Keyword If | '${vnf_status}' == 'PASS' | vnf_manager.Kill All VMs
diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot
index 1f10787bc1..08f579c9df 100644
--- a/resources/libraries/robot/shared/traffic.robot
+++ b/resources/libraries/robot/shared/traffic.robot
@@ -61,7 +61,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Send packet and verify headers \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| Send packet and verify headers \| \${nodes['TG']} \| 10.0.0.1 \
| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \|
| |
@@ -120,7 +120,7 @@
| | ... | *Example:*
| |
| | ... | \| Packet transmission from port to port should fail \
-| | ... | \| ${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \
+| | ... | \| \${nodes['TG']} \| 10.0.0.1 \ \| 32.0.0.1 \| eth2 \
| | ... | \| 08:00:27:a2:52:5b \| eth3 \| 08:00:27:4d:ca:7a \
| | ... | \| 08:00:27:ee:fd:b3 \| 08:00:27:7d:fd:10 \|
| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port}
@@ -150,7 +150,7 @@
| | ... | - dst_ip - Packet destination IP address. Type: string
| |
| | ... | *Example:*
-| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| Send packet and verify marking \| \${nodes['TG']} \| eth1 \| eth2 \
| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \
| | ... | \| 192.168.122.1 \|
| |
@@ -190,9 +190,9 @@
| | ... | *Example:*
| |
| | ... | \| Send VXLAN encapsulated packet and verify received packet \
-| | ... | \| ${tg_node} \| port4 \| port4 \
+| | ... | \| \${tg_node} \| port4 \| port4 \
| | ... | \| fa:16:3e:6d:f9:c5 \| fa:16:3e:e6:6d:9a \| 192.168.0.1 \
-| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| ${102} \|
+| | ... | \| 192.168.0.2 \| ${101} \| 192.168.0.2 \| 192.168.0.1 \| \${102} \|
| |
| | [Arguments] | ${tg_node} | ${tx_if} | ${rx_if}
| | ... | ${tx_src_mac} | ${tx_dst_mac}
@@ -231,7 +231,7 @@
| | ... | *Example:*
| |
| | ... | \| Send ICMP echo request and verify answer \
-| | ... | \| ${nodes['TG']} \| eth2 \
+| | ... | \| \${nodes['TG']} \| eth2 \
| | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \
| | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \|
| |
@@ -270,14 +270,14 @@
| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string
| |
| | ... | *Example:*
-| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
-| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
+| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \|
+| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \|
| | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\
-| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \
-| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \
+| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \
| | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \
-| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \
-| | ... | \| 192.168.100.3 \|
+| | ... | \| \${1001} \| \00} \| 192.168.3.3 \| 192.168.4.4 \
+| | ... | \| 192.168.100.2 \| 192.168.100.3 \|
| |
| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac}
| | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg}
@@ -329,7 +329,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \
| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \
| | ... | \| 10.0.1.2 \|
@@ -373,14 +373,14 @@
| | ... | - dst_tun - Destination tunnel IP address. Type: string
| |
| | ... | *Example:*
-| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
-| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
+| | ... | \| \${encr_alg}= \| Crypto Alg AES CBC 128 \|
+| | ... | \| \${auth_alg}= \| Integ Alg SHA1 96 \|
| | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\
-| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \
-| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| ${encr_alg} \
-| | ... | \| sixteenbytes_key \| ${auth_alg} \| twentybytessecretkey \
-| | ... | \| ${1001} \| ${1000} \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \
-| | ... | \| 192.168.100.3 \|
+| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| \${encr_alg} \
+| | ... | \| sixteenbytes_key \| \${auth_alg} \| twentybytessecretkey \
+| | ... | \| \${1001} \| \${1000} \| 192.168.3.3 \| 192.168.4.4 \
+| | ... | \| 192.168.100.2 \| 192.168.100.3 \|
| |
| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface} | ${tx_dst_mac}
| | ... | ${rx_src_mac} | ${crypto_alg} | ${crypto_key} | ${integ_alg}
@@ -429,7 +429,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \
+| | ... | \| Send packet and verify LISP GPE encap \| \${nodes['TG']} \
| | ... | \| 10.0.0.1 \| 32.0.0.1 \
| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \
@@ -476,7 +476,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| Send packet and verify LISP encap \| \${nodes['TG']} \| 10.0.0.1 \
| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \
| | ... | \| 10.0.1.2 \|
@@ -529,7 +529,7 @@
| |
| | ... | *Example:*
| | ... | \| Send IPv6 Packet and verify SRv6 encapsulation in received packet\
-| | ... | \| ${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \
| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 2002:1:: \
| | ... | \| 2003:2:: \| 2003:1:: \| 2002:2:: \| decap=${False} \
| | ... | \| tg_dstsid3=2002:4:: \| dut_dstsid3=2003:4:: \
@@ -589,7 +589,7 @@
| | ... | *Example:*
| |
| | ... | \| Send TCP or UDP packet and verify network address translations \
-| | ... | \| ${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \
+| | ... | \| \${nodes['TG']} \| port1 \| port2 \| 08:00:27:cc:4f:54 \
| | ... | \| 08:00:27:c9:6a:d5 \| 192.168.0.0 \| 68.142.68.0 \| 20.0.0.0 \
| | ... | \| TCP \| 1024 \| 8080 \|
| |
@@ -609,3 +609,46 @@
| | ... | --src_port_in ${src_port_in} | --src_port_out ${src_port_out}
| | ... | --dst_port ${dst_port}
| | Run Traffic Script On Node | nat.py | ${tg_node} | ${args}
+
+| Send IP packet and verify GENEVE encapsulation in received packets
+| | [Documentation] | Send IP packet from TG to DUT. Receive GENEVE packet\
+| | ... | from DUT on TG and verify GENEVE encapsulation. Send GENEVE packet in\
+| | ... | opposite direction and verify received IP packet.
+| |
+| | ... | *Arguments:*
+| | ... | - node - TG node. Type: dictionary
+| | ... | - tx_interface - TG Interface 1. Type: string
+| | ... | - rx_interface - TG Interface 2. Type: string
+| | ... | - tx_dst_mac - Destination MAC for TX interface / DUT interface 1 MAC.
+| | ... | Type: string
+| | ... | - rx_src_mac - Source MAC for RX interface / DUT interface 2 MAC.
+| | ... | Type: string
+| | ... | - tun_local_ip - GENEVE tunnel source IP address. Type: string
+| | ... | - tun_remote_ip - GENEVE tunnel destination IP address. Type: string
+| | ... | - tun_vni - GENEVE tunnel VNI. Type: integer
+| | ... | - tun_src_ip - Source IP address of original IP packet / inner source
+| | ... | IP address of GENEVE packet. Type: string
+| | ... | - tun_dst_ip - Destination IP address of original IP packet / inner
+| | ... | destination IP address of GENEVE packet. Type: string
+| |
+| | ... | *Example:*
+| | ... | \| Send IP packet and verify GENEVE encapsulation in received packets\
+| | ... | \| \${nodes['TG']} \| eth1 \| eth2 \
+| | ... | \| 52:54:00:d4:d8:22 \| 52:54:00:d4:d8:3e \| 1.1.1.2 \| 1.1.1.1 \
+| | ... | \| 1 \| 10.128.1.0 \| 10.0.1.0 \| 24 \|11.0.1.2\|
+| |
+| | [Arguments] | ${node} | ${tx_interface} | ${rx_interface}
+| | ... | ${tx_dst_mac} | ${rx_src_mac} | ${tun_local_ip} | ${tun_remote_ip}
+| | ... | ${tun_vni} | ${tun_src_ip} | ${tun_dst_ip}
+| |
+| | ${tx_src_mac}= | Get Interface Mac | ${node} | ${tx_interface}
+| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_interface}
+| | ${rx_dst_mac}= | Get Interface Mac | ${node} | ${rx_interface}
+| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_interface}
+| | ${args}= | Catenate | --rx_if ${rx_if_name} | --tx_if ${tx_if_name}
+| | ... | --tx_src_mac ${tx_src_mac} | --tx_dst_mac ${tx_dst_mac}
+| | ... | --rx_src_mac ${rx_src_mac} | --rx_dst_mac ${rx_dst_mac}
+| | ... | --tun_local_ip ${tun_local_ip} | --tun_remote_ip ${tun_remote_ip}
+| | ... | --tun_vni ${tun_vni} | --tun_src_ip ${tun_src_ip}
+| | ... | --tun_dst_ip ${tun_dst_ip}
+| | Run Traffic Script On Node | geneve_tunnel.py | ${node} | ${args}
diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot
new file mode 100644
index 0000000000..fe20d6dd6d
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot
@@ -0,0 +1,107 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/ip/geneve.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | IP4BASE | UDP | ENCAP | GENEVE
+| ... | GENEVE_L3MODE | GENEVE4_1TUN | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4--ethip4udpgeneve-1tun-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | geneve4
+|
+| Test Template | Local Template
+|
+| Documentation | *L2BD with GENEVE L3 mode test cases*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
+| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
+| ... | routing over GENEVE tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
+| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\
+| ... | DUT1 is tested with ${nic_name}.
+| ... | *[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link\
+| ... | to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified\
+| ... | for correctness and its outer and inner IPv4 and MAC addresses, UDP\
+| ... | ports and GENEVE vni and protocol number. Then test\
+| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to\
+| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for\
+| ... | correctness and its IPv4 and MAC addresses
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | geneve_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+# IP settings
+| ${dut1_if1_ip4}= | 20.0.0.1
+| ${dut1_if2_ip4}= | 30.0.0.1
+| ${tg_if1_ip4}= | 20.0.0.2
+| ${tg_if2_ip4}= | 30.0.0.2
+# GENEVE settings
+| ${gen_mode}= | L3
+| ${n_tunnels}= | ${1}
+| &{gen_tunnel}=
+| ... | local=1.1.1.2 | remote=1.1.1.1 | vni=${1}
+| ... | src_ip=10.128.1.0 | dst_ip=10.0.1.0 | ip_mask=${24} | if_ip=11.0.1.2
+
+*** Keywords ***
+| Local Template
+| |
+| | [Documentation]
+| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize GENEVE L3 mode in circular topology
+| | Then Send IP packet and verify GENEVE encapsulation in received packets
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
+| | ... | ${gen_tunnel}[local] | ${gen_tunnel}[remote] | ${gen_tunnel}[vni]
+| | ... | ${gen_tunnel}[src_ip] | ${gen_tunnel}[dst_ip]
+| | And Show Geneve Tunnel Data | ${nodes['DUT1']}
+
+*** Test Cases ***
+| 64B-ethip4--ethip4udpgeneve-1tun-ip4base-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}