aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot152
-rw-r--r--tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot1
2 files changed, 153 insertions, 0 deletions
diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot
new file mode 100644
index 0000000000..864d24f7fb
--- /dev/null
+++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr.robot
@@ -0,0 +1,152 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/crypto/ipsec.robot
+| Resource | resources/libraries/robot/overlay/lispgpe.robot
+| ...
+| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | IP4FWD
+| ... | LISPGPE | IPSEC | IPSECHW | IPSECTRAN | ENCAP | IP4UNRLAY | IP4OVRLAY
+| ... | NIC_Intel-XL710
+| ...
+| Suite Setup | Set up IPSec performance test suite | L3 | Intel-XL710
+| ... | HW_cryptodev
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| ...
+| Test Teardown | Tear down performance mrr test
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 IPsec transport mode performance test suite.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 on TG-DUTn,\
+| ... | Eth-IPv4-IPSec-LISPGPE-IPv4 on DUT1-DUT2
+| ... | *[Cfg] DUT configuration:* Each DUT is configured with LISP and IPsec\
+| ... | in each direction. IPsec is in transport mode. DUTs get IPv4 traffic\
+| ... | from TG, encrypt it and send to another DUT, where packets are\
+| ... | decrypted and sent back to TG.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, number of flows per flow-group equals to\
+| ... | number of IPSec tunnels) with all packets\
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and\
+| ... | static payload. MAC addresses are matching MAC addresses of the TG\
+| ... | node interfaces. Incrementing of IP.dst (IPv4 destination address)\
+| ... | field is applied to both streams.
+| ... | *[Ref] Applicable standard specifications:* RFC6830, RFC4303 and\
+| ... | RFC2544.
+
+*** Variables ***
+# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
+| ${s_24.5G}= | ${24500000000}
+# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
+| ${s_18.75Mpps}= | ${18750000}
+| ${dut2_spi}= | ${1000}
+| ${dut1_spi}= | ${1001}
+| ${ESP_PROTO}= | ${50}
+| ${overhead}= | ${54}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] Each DUT is configured with LISP and IPsec in each direction.\
+| | ... | IPsec is in transport mode.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
+| | ... | trial throughput test.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | ${encr_alg} = | Crypto Alg AES CBC 128
+| | ${auth_alg} = | Integ Alg SHA1 96
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
+| | ... | ${s_24.5G} | ${framesize} | overhead=${overhead}
+| | ... | pps_limit=${s_18.75Mpps}
+| | And Add cryptodev to all DUTs | ${phy_cores}
+| | And Add DPDK dev default RXD to all DUTs | 2048
+| | And Add DPDK dev default TXD to all DUTs | 2048
+| | And Apply startup configuration on all VPP DUTs
+| | When Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | When Initialize LISP GPE IPv4 over IPsec in 3-node circular topology
+| | ... | ${encr_alg} | ${auth_alg}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
+
+| tc02-64B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
+
+| tc03-64B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
+
+| tc04-1518B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc05-1518B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc06-1518B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc07-9000B-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc08-9000B-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc09-9000B-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc10-IMIX-1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc11-IMIX-2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc12-IMIX-4c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
index 8354abcb7b..cfe4a50027 100644
--- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdr.robot
@@ -78,6 +78,7 @@
| | Set Test Variable | ${framesize}
| | Set Test Variable | ${min_rate} | ${10000}
| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
| | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
| | ... | ${s_limit} | ${framesize}