aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xresources/libraries/bash/entry/cleanup_dpdk.sh40
-rwxr-xr-xresources/libraries/bash/entry/init_dpdk.sh39
-rwxr-xr-xresources/libraries/bash/entry/install_dpdk.sh41
-rwxr-xr-xresources/libraries/bash/entry/patch_l3fwd.sh39
-rwxr-xr-xresources/libraries/bash/entry/patch_l3fwd_flip_routes (renamed from tests/dpdk/dpdk_scripts/patch_l3fwd_flip_routes)0
-rwxr-xr-xresources/libraries/bash/entry/run_l3fwd.sh40
-rwxr-xr-xresources/libraries/bash/entry/run_testpmd.sh40
-rw-r--r--resources/libraries/bash/function/dpdk.sh362
-rw-r--r--resources/libraries/python/Constants.py42
-rw-r--r--resources/libraries/python/DPDK/DPDKTools.py123
-rw-r--r--resources/libraries/python/DPDK/L2fwdTest.py58
-rw-r--r--resources/libraries/python/DPDK/L3fwdTest.py140
-rw-r--r--resources/libraries/python/DPDK/TestpmdTest.py85
-rw-r--r--resources/libraries/python/DpdkUtil.py157
-rw-r--r--resources/libraries/python/QemuUtils.py17
-rw-r--r--resources/libraries/python/autogen/Regenerator.py39
-rw-r--r--resources/libraries/robot/dpdk/default.robot24
-rw-r--r--resources/libraries/robot/shared/suite_setup.robot4
-rw-r--r--resources/libraries/robot/shared/suite_teardown.robot2
-rwxr-xr-xtests/dpdk/dpdk_scripts/cleanup_dpdk.sh86
-rwxr-xr-xtests/dpdk/dpdk_scripts/init_dpdk.sh27
-rwxr-xr-xtests/dpdk/dpdk_scripts/install_dpdk.sh71
-rwxr-xr-xtests/dpdk/dpdk_scripts/patch_l3fwd.sh35
-rwxr-xr-xtests/dpdk/dpdk_scripts/run_l2fwd.sh148
-rwxr-xr-xtests/dpdk/dpdk_scripts/run_l3fwd.sh126
-rw-r--r--tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot14
-rw-r--r--tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot14
-rw-r--r--tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot14
-rw-r--r--tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot14
-rw-r--r--tests/dpdk/perf/__init__.robot2
30 files changed, 1093 insertions, 750 deletions
diff --git a/resources/libraries/bash/entry/cleanup_dpdk.sh b/resources/libraries/bash/entry/cleanup_dpdk.sh
new file mode 100755
index 0000000000..726f98c1a1
--- /dev/null
+++ b/resources/libraries/bash/entry/cleanup_dpdk.sh
@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Cleanup the DPDK framework on the DUT node. Bind interfaces to driver.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_kill || die
+dpdk_bind "${@}" || die
diff --git a/resources/libraries/bash/entry/init_dpdk.sh b/resources/libraries/bash/entry/init_dpdk.sh
new file mode 100755
index 0000000000..910ade38f9
--- /dev/null
+++ b/resources/libraries/bash/entry/init_dpdk.sh
@@ -0,0 +1,39 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Initialize the DPDK framework on the DUT node. Bind interfaces to driver.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_bind "${@}" || die
diff --git a/resources/libraries/bash/entry/install_dpdk.sh b/resources/libraries/bash/entry/install_dpdk.sh
new file mode 100755
index 0000000000..d87aa5a832
--- /dev/null
+++ b/resources/libraries/bash/entry/install_dpdk.sh
@@ -0,0 +1,41 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Install the DPDK framework on the DUT node. Check prerequisites.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_extract || die
+dpdk_compile || die
+dpdk_precheck || die
diff --git a/resources/libraries/bash/entry/patch_l3fwd.sh b/resources/libraries/bash/entry/patch_l3fwd.sh
new file mode 100755
index 0000000000..0ce02a0047
--- /dev/null
+++ b/resources/libraries/bash/entry/patch_l3fwd.sh
@@ -0,0 +1,39 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Recompile DPDK l3fwd sample app with patching.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_l3fwd_compile "${@}" || die
diff --git a/tests/dpdk/dpdk_scripts/patch_l3fwd_flip_routes b/resources/libraries/bash/entry/patch_l3fwd_flip_routes
index e0b204eb9c..e0b204eb9c 100755
--- a/tests/dpdk/dpdk_scripts/patch_l3fwd_flip_routes
+++ b/resources/libraries/bash/entry/patch_l3fwd_flip_routes
diff --git a/resources/libraries/bash/entry/run_l3fwd.sh b/resources/libraries/bash/entry/run_l3fwd.sh
new file mode 100755
index 0000000000..5716dec59a
--- /dev/null
+++ b/resources/libraries/bash/entry/run_l3fwd.sh
@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Helper functions for starting l3fwd.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_kill || die
+dpdk_l3fwd "${@}" || die
diff --git a/resources/libraries/bash/entry/run_testpmd.sh b/resources/libraries/bash/entry/run_testpmd.sh
new file mode 100755
index 0000000000..6208487774
--- /dev/null
+++ b/resources/libraries/bash/entry/run_testpmd.sh
@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Helper functions for starting testpmd.
+
+set -exuo pipefail
+
+# Assumptions:
+# + There is a directory holding CSIT code to use (this script is there).
+# + At least one of the following is true:
+# ++ JOB_NAME environment variable is set,
+# ++ or this entry script has access to arguments.
+# Consequences (and specific assumptions) are multiple,
+# examine tree of functions for current description.
+
+# FIXME: Define API contract (as opposed to just help) for bootstrap.
+
+# "set -eu" handles failures from the following two lines.
+BASH_ENTRY_DIR="$(dirname $(readlink -e "${BASH_SOURCE[0]}"))"
+BASH_FUNCTION_DIR="$(readlink -e "${BASH_ENTRY_DIR}/../function")"
+source "${BASH_FUNCTION_DIR}/common.sh" || {
+ echo "Source failed." >&2
+ exit 1
+}
+source "${BASH_FUNCTION_DIR}/dpdk.sh" || die "Source failed."
+common_dirs || die
+dpdk_kill || die
+dpdk_testpmd "${@}" || die
diff --git a/resources/libraries/bash/function/dpdk.sh b/resources/libraries/bash/function/dpdk.sh
new file mode 100644
index 0000000000..da46c6d49c
--- /dev/null
+++ b/resources/libraries/bash/function/dpdk.sh
@@ -0,0 +1,362 @@
+#!/usr/bin/env bash
+
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -exuo pipefail
+
+
+function common_dirs () {
+
+ # Set global variables, create some directories (without touching content).
+ # This function assumes running in remote testbed. It might override other
+ # functions if included from common.sh.
+
+ # Variables set:
+ # - BASH_FUNCTION_DIR - Path to existing directory this file is located in.
+ # - DPDK_DIR - Path to DPDK framework.
+ # - CSIT_DIR - Path to CSIT framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ this_file=$(readlink -e "${BASH_SOURCE[0]}") || {
+ die "Some error during locating of this source file."
+ }
+ BASH_FUNCTION_DIR=$(dirname "${this_file}") || {
+ die "Some error during dirname call."
+ }
+ CSIT_DIR=$(readlink -e "/tmp/openvpp-testing") || {
+ die "Readlink failed."
+ }
+ mkdir -p "${CSIT_DIR}/dpdk" || die "Mkdir failed."
+ DPDK_DIR=$(readlink -e "${CSIT_DIR}/dpdk") || {
+ die "Readlink failed."
+ }
+}
+
+
+function dpdk_bind () {
+
+ # Bind interfaces to driver.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # - @ - Script cli arguments.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ pushd "${DPDK_DIR}/" || die "Pushd failed"
+
+ sudo ./usertools/dpdk-devbind.py -b "${@}" || {
+ die "Bind ${@} failed"
+ }
+
+ popd || die "Popd failed"
+}
+
+
+function dpdk_compile () {
+
+ # Compile DPDK archive.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # - CSIT_DIR - Path to CSIT framework.
+ # Variables exported:
+ # - RTE_SDK - DPDK directory.
+ # - RTE_TARGET - Make targed of DPDK framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ arch=$(uname -m) || {
+ die "Get CPU architecture failed."
+ }
+
+ # DPDK prefers "arm64" to "aarch64" and does not allow arm64 native target.
+ if [ ${arch} == "aarch64" ]; then
+ arch="arm64"
+ machine="armv8a"
+ else
+ machine="native"
+ fi
+
+ # Patch settings.
+ sed_mlx="s/^CONFIG_RTE_LIBRTE_MLX5_PMD=n/CONFIG_RTE_LIBRTE_MLX5_PMD=y/g"
+ sed_i40e="s/^CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/g"
+ sed_file="./config/common_base"
+
+ pushd "${DPDK_DIR}" || die "Pushd failed"
+ if ( lsmod || die ) | fgrep mlx; then
+ sed -i "${sed_mlx}" "${sed_file}" || die
+ fi
+
+ sed -i "${sed_i40e}" "${sed_file}" || die "Patch failed"
+
+ # Compile
+ make install T="${arch}"-"${machine}"-linuxapp-gcc -j || {
+ die "Failed to compile DPDK!"
+ }
+ popd || die "Popd failed"
+
+ # Compile the l3fwd.
+ export RTE_SDK="${DPDK_DIR}/"
+ export RTE_TARGET="${arch}-${machine}-linuxapp-gcc"
+ # Patch settings.
+ sed_rxd="s/^#define RTE_TEST_RX_DESC_DEFAULT 128/#define RTE_TEST_RX_DESC_DEFAULT 1024/g"
+ sed_txd="s/^#define RTE_TEST_TX_DESC_DEFAULT 512/#define RTE_TEST_TX_DESC_DEFAULT 1024/g"
+ sed_file="./main.c"
+ pushd "${RTE_SDK}"/examples/l3fwd || die "Pushd failed"
+ sed -i "${sed_rxd}" "${sed_file}" || die "Patch failed"
+ sed -i "${sed_txd}" "${sed_file}" || die "Patch failed"
+ make clean || die "Failed to compile l3fwd"
+ make -j || die "Failed to compile l3fwd"
+ popd || die "Popd failed"
+}
+
+
+function dpdk_extract () {
+
+ # Extract DPDK framework.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # - CSIT_DIR - Path to CSIT framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ pushd "${CSIT_DIR}" || die "Pushd failed"
+ tar -xvf download_dir/dpdk*.tar.xz --strip=1 --directory "${DPDK_DIR}" || {
+ die "Failed to extract DPDK!"
+ }
+}
+
+
+function dpdk_kill () {
+
+ # Kill testpmd and/or l3fwd if running.
+
+ # Function will be noisy and requires custom error handling.
+ set -x
+ set +e
+
+ # Try to kill the testpmd.
+ sudo pgrep testpmd
+ if [ $? -eq "0" ]; then
+ success=false
+ sudo pkill testpmd
+ for attempt in {1..60}; do
+ echo "Checking if testpmd is still alive, attempt nr ${attempt}"
+ sudo pgrep testpmd
+ if [ $? -eq "1" ]; then
+ success=true
+ break
+ fi
+ echo "testpmd is still alive, waiting 1 second"
+ sleep 1
+ done
+ if [ "$success" = false ]; then
+ echo "The command sudo pkill testpmd failed"
+ sudo pkill -9 testpmd
+ exit 1
+ fi
+ else
+ echo "testpmd is not running"
+ fi
+
+ # Try to kill the l3fwd.
+ l3fwd_pid="$(pgrep l3fwd)"
+ if [ ! -z "${l3fwd_pid}" ]; then
+ success=false
+ sudo kill -15 "${l3fwd_pid}"
+ for attempt in {1..60}; do
+ echo "Checking if l3fwd is still alive, attempt nr ${attempt}"
+ l3fwd_pid="$(pgrep l3fwd)"
+ if [ -z "${l3fwd_pid}" ]; then
+ success=true
+ break
+ fi
+ echo "l3fwd is still alive, waiting 1 second"
+ sleep 1
+ done
+ if [ "${success}" = false ]; then
+ echo "The command sudo kill -15 l3fwd failed"
+ sudo kill -9 "${l3fwd_pid}"
+ exit 1
+ fi
+ else
+ echo "l3fwd is not running"
+ fi
+
+ # Remove hugepages
+ sudo rm -f /dev/hugepages/* || die "Removing hugepages failed!"
+}
+
+
+function dpdk_l3fwd_compile () {
+
+ # Compile DPDK l3fwd sample app.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # - CSIT_DIR - Path to CSIT framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ arch=$(uname -m) || {
+ die "Get CPU architecture failed."
+ }
+
+ # DPDK prefers "arm64" to "aarch64" and does not allow arm64 native target.
+ if [ ${arch} == "aarch64" ]; then
+ arch="arm64"
+ machine="armv8a"
+ else
+ machine="native"
+ fi
+
+ # Compile the l3fwd.
+ export RTE_SDK="${DPDK_DIR}/"
+ export RTE_TARGET="${arch}-${machine}-linuxapp-gcc"
+ # Patch settings.
+ sed_rxd="s/^#define RTE_TEST_RX_DESC_DEFAULT 128/#define RTE_TEST_RX_DESC_DEFAULT 2048/g"
+ sed_txd="s/^#define RTE_TEST_TX_DESC_DEFAULT 512/#define RTE_TEST_TX_DESC_DEFAULT 2048/g"
+ sed_file="./main.c"
+ pushd "${RTE_SDK}"/examples/l3fwd || die "Pushd failed"
+ sed -i "${sed_rxd}" "${sed_file}" || die "Patch failed"
+ sed -i "${sed_txd}" "${sed_file}" || die "Patch failed"
+ chmod +x ${1} && source ${1} || die "Patch failed"
+ make clean || die "Failed to compile l3fwd"
+ make -j || die "Failed to compile l3fwd"
+ popd || die "Popd failed"
+}
+
+
+function dpdk_l3fwd () {
+
+ # Run DPDK l3fwd.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ arch=$(uname -m) || {
+ die "Get CPU architecture failed."
+ }
+
+ # DPDK prefers "arm64" to "aarch64" and does not allow arm64 native target.
+ if [ ${arch} == "aarch64" ]; then
+ arch="arm64"
+ machine="armv8a"
+ else
+ machine="native"
+ fi
+
+ rm -f screenlog.0 || true
+ binary="${DPDK_DIR}/examples/l3fwd/build/app/l3fwd"
+
+ sudo sh -c "screen -dmSL DPDK-test ${binary} ${@}" || {
+ die "Failed to start l3fwd"
+ }
+
+ for attempt in {1..60}; do
+ echo "Checking if l3fwd is alive, attempt nr ${attempt}"
+ if fgrep "L3FWD: entering main loop on lcore" screenlog.0; then
+ exit 0
+ fi
+ sleep 1
+ done
+ cat screenlog.0
+
+ exit 1
+}
+
+
+function dpdk_precheck () {
+
+ # Precheck system settings (nr_hugepages, max_map_count).
+ #
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ sys_hugepage="$(< /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages)"
+ node0="/sys/devices/system/node/node0/hugepages/hugepages-2048kB/"
+ node1="/sys/devices/system/node/node1/hugepages/hugepages-2048kB/"
+ if [ ${sys_hugepage} -lt 4096 ]; then
+ echo 2048 | sudo tee "${node0}"/nr_hugepages || die
+ echo 2048 | sudo tee "${node1}"/nr_hugepages || die
+ fi
+
+ sys_map="$(< /proc/sys/vm/max_map_count)"
+ if [ ${sys_map} -lt 200000 ]; then
+ echo 200000 | sudo tee /proc/sys/vm/max_map_count || die
+ fi
+}
+
+
+function dpdk_testpmd () {
+
+ # Run DPDK testpmd.
+ #
+ # Variables read:
+ # - DPDK_DIR - Path to DPDK framework.
+ # Functions called:
+ # - die - Print to stderr and exit.
+
+ set -exuo pipefail
+
+ arch=$(uname -m) || {
+ die "Get CPU architecture failed."
+ }
+
+ # DPDK prefers "arm64" to "aarch64" and does not allow arm64 native target.
+ if [ ${arch} == "aarch64" ]; then
+ arch="arm64"
+ machine="armv8a"
+ else
+ machine="native"
+ fi
+
+ rm -f screenlog.0 || true
+ binary="${DPDK_DIR}/${arch}-${machine}-linuxapp-gcc/app/testpmd"
+
+ sudo sh -c "screen -dmSL DPDK-test ${binary} ${@}" || {
+ die "Failed to start testpmd"
+ }
+
+ for attempt in {1..60}; do
+ echo "Checking if testpmd is alive, attempt nr ${attempt}"
+ if fgrep "Press enter to exit" screenlog.0; then
+ cat screenlog.0
+ exit 0
+ fi
+ sleep 1
+ done
+ cat screenlog.0
+
+ exit 1
+}
diff --git a/resources/libraries/python/Constants.py b/resources/libraries/python/Constants.py
index 7f45efe4e8..de7a120252 100644
--- a/resources/libraries/python/Constants.py
+++ b/resources/libraries/python/Constants.py
@@ -323,6 +323,38 @@ class Constants:
u"rdma-core": u"rdma-",
}
+ # Number of virtual functions of physical nic.
+ NIC_DRIVER_TO_VFS = {
+ u"vfio-pci": u"nic_vfs}= | 0",
+ u"avf": u"nic_vfs}= | 1",
+ u"rdma-core": u"nic_vfs}= | 0",
+ }
+
+ # Not each driver is supported by each NIC.
+ DPDK_NIC_NAME_TO_DRIVER = {
+ u"Cisco-VIC-1227": [u"vfio-pci"],
+ u"Cisco-VIC-1385": [u"vfio-pci"],
+ u"Intel-X520-DA2": [u"vfio-pci"],
+ u"Intel-X553": [u"vfio-pci"],
+ u"Intel-X710": [u"vfio-pci"],
+ u"Intel-XL710": [u"vfio-pci"],
+ u"Intel-XXV710": [u"vfio-pci"],
+ u"Amazon-Nitro-50G": [u"vfio-pci"],
+ u"Mellanox-CX556A": [u"mlx5_core"],
+ }
+
+ # Tags to differentiate tests for different NIC driver.
+ DPDK_NIC_DRIVER_TO_TAG = {
+ u"vfio-pci": u"DRV_VFIO_PCI",
+ u"mlx5_core": u"DRV_MLX5_CORE",
+ }
+
+ # Suite names have to be different, add prefix.
+ DPDK_NIC_DRIVER_TO_SUITE_PREFIX = {
+ u"vfio-pci": u"",
+ u"mlx5_core": u"mlx5-",
+ }
+
# Some identifiers constructed from suite names
# have to be independent of NIC driver used.
# In order to remove or reject the NIC driver part,
@@ -330,13 +362,9 @@ class Constants:
FORBIDDEN_SUITE_PREFIX_LIST = [
prefix for prefix in NIC_DRIVER_TO_SUITE_PREFIX.values() if prefix
]
-
- # Number of virtual functions of physical nic.
- NIC_DRIVER_TO_VFS = {
- u"vfio-pci": u"nic_vfs}= | 0",
- u"avf": u"nic_vfs}= | 1",
- u"rdma-core": u"nic_vfs}= | 0",
- }
+ FORBIDDEN_SUITE_PREFIX_LIST += [
+ prefix for prefix in DPDK_NIC_DRIVER_TO_SUITE_PREFIX.values() if prefix
+ ]
# TODO CSIT-1481: Crypto HW should be read from topology file instead.
NIC_NAME_TO_CRYPTO_HW = {
diff --git a/resources/libraries/python/DPDK/DPDKTools.py b/resources/libraries/python/DPDK/DPDKTools.py
index 868d2d886d..9bb89968d2 100644
--- a/resources/libraries/python/DPDK/DPDKTools.py
+++ b/resources/libraries/python/DPDK/DPDKTools.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -12,12 +12,12 @@
# limitations under the License.
-"""This module implements initialization and cleanup of DPDK environment."""
+"""This module implements initialization and cleanup of DPDK framework."""
from robot.api import logger
from resources.libraries.python.Constants import Constants
-from resources.libraries.python.ssh import SSH, exec_cmd_no_error
+from resources.libraries.python.ssh import exec_cmd_no_error
from resources.libraries.python.topology import NodeType, Topology
@@ -28,84 +28,68 @@ class DPDKTools:
"""
@staticmethod
- def initialize_dpdk_environment(dut_node, dut_if1, dut_if2):
+ def initialize_dpdk_framework(node, if1, if2, nic_driver):
"""
- Initialize the DPDK test environment on the dut_node.
- Load the module uio and igb_uio, then bind the test NIC to the igb_uio.
-
- :param dut_node: Will init the DPDK on this node.
- :param dut_if1: DUT interface name.
- :param dut_if2: DUT interface name.
- :type dut_node: dict
- :type dut_if1: str
- :type dut_if2: str
- :raises RuntimeError: If it fails to bind the interfaces to igb_uio.
- """
- if dut_node[u"type"] == NodeType.DUT:
- pci_address1 = Topology.get_interface_pci_addr(dut_node, dut_if1)
- pci_address2 = Topology.get_interface_pci_addr(dut_node, dut_if2)
-
- ssh = SSH()
- ssh.connect(dut_node)
+ Initialize the DPDK framework on the DUT node. Bind interfaces to
+ driver.
- arch = Topology.get_node_arch(dut_node)
- cmd = f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts" \
- f"/init_dpdk.sh {pci_address1} {pci_address2} {arch}"
+ :param node: DUT node.
+ :param if1: DUT first interface name.
+ :param if2: DUT second interface name.
+ :param nic_driver: Interface driver.
+ :type node: dict
+ :type if1: str
+ :type if2: str
+ :type nic_driver: str
+ :raises RuntimeError: If it fails to bind the interfaces to driver.
+ """
+ if node[u"type"] == NodeType.DUT:
+ pci_address1 = Topology.get_interface_pci_addr(node, if1)
+ pci_address2 = Topology.get_interface_pci_addr(node, if2)
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=600)
- if ret_code != 0:
- raise RuntimeError(
- f"Failed to bind the interfaces to igb_uio at node "
- f"{dut_node['host']}"
- )
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\
+ f"/entry/init_dpdk.sh " \
+ f"{nic_driver} {pci_address1} {pci_address2}"
+ message = u"Initialize the DPDK failed!"
+ exec_cmd_no_error(node, command, timeout=600, message=message)
@staticmethod
- def cleanup_dpdk_environment(dut_node, dut_if1, dut_if2):
+ def cleanup_dpdk_framework(node, if1, if2):
"""
- Cleanup the DPDK test environment on the DUT node.
- Unbind the NIC from the igb_uio and bind them to the kernel driver.
-
- :param dut_node: Will cleanup the DPDK on this node.
- :param dut_if1: DUT interface name.
- :param dut_if2: DUT interface name.
- :type dut_node: dict
- :type dut_if1: str
- :type dut_if2: str
+ Cleanup the DPDK framework on the DUT node. Bind interfaces to
+ default driver specified in topology.
+
+ :param node: Will cleanup the DPDK on this node.
+ :param if1: DUT first interface name.
+ :param if2: DUT second interface name.
+ :type node: dict
+ :type if1: str
+ :type if2: str
:raises RuntimeError: If it fails to cleanup the dpdk.
"""
- if dut_node[u"type"] == NodeType.DUT:
- pci_address1 = Topology.get_interface_pci_addr(dut_node, dut_if1)
- if1_driver = Topology.get_interface_driver(dut_node, dut_if1)
- pci_address2 = Topology.get_interface_pci_addr(dut_node, dut_if2)
- if2_driver = Topology.get_interface_driver(dut_node, dut_if2)
-
- ssh = SSH()
- ssh.connect(dut_node)
-
- cmd = f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts" \
- f"/cleanup_dpdk.sh {if1_driver} {pci_address1} {if2_driver} " \
- f"{pci_address2}"
-
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=1200)
- if ret_code != 0:
- raise RuntimeError(
- f"Failed to cleanup the dpdk at node {dut_node[u'host']}"
- )
+ if node[u"type"] == NodeType.DUT:
+ pci_address1 = Topology.get_interface_pci_addr(node, if1)
+ pci_address2 = Topology.get_interface_pci_addr(node, if2)
+ # We are not supporting more than one driver yet.
+ nic_driver = Topology.get_interface_driver(node, if1)
+
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\
+ f"/entry/cleanup_dpdk.sh " \
+ f"{nic_driver} {pci_address1} {pci_address2}"
+ message = u"Cleanup the DPDK failed!"
+ exec_cmd_no_error(node, command, timeout=1200, message=message)
@staticmethod
- def install_dpdk_test(node):
+ def install_dpdk_framework(node):
"""
- Prepare the DPDK test environment
+ Prepare the DPDK framework on the DUT node.
- :param node: Dictionary created from topology
+ :param node: Node from topology file.
:type node: dict
- :returns: nothing
:raises RuntimeError: If command returns nonzero return code.
"""
- arch = Topology.get_node_arch(node)
-
- command = f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts" \
- f"/install_dpdk.sh {arch}"
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}" \
+ f"/entry/install_dpdk.sh"
message = u"Install the DPDK failed!"
exec_cmd_no_error(node, command, timeout=600, message=message)
@@ -116,14 +100,13 @@ class DPDKTools:
logger.info(f"DPDK Version: {stdout}")
@staticmethod
- def install_dpdk_test_on_all_duts(nodes):
+ def install_dpdk_framework_on_all_duts(nodes):
"""
- Prepare the DPDK test environment on all DUTs.
+ Prepare the DPDK framework on all DUTs.
:param nodes: Nodes from topology file.
:type nodes: dict
- :returns: nothing
"""
for node in list(nodes.values()):
if node[u"type"] == NodeType.DUT:
- DPDKTools.install_dpdk_test(node)
+ DPDKTools.install_dpdk_framework(node)
diff --git a/resources/libraries/python/DPDK/L2fwdTest.py b/resources/libraries/python/DPDK/L2fwdTest.py
deleted file mode 100644
index 76d1dcb362..0000000000
--- a/resources/libraries/python/DPDK/L2fwdTest.py
+++ /dev/null
@@ -1,58 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements functionality which sets L2 forwarding for DPDK on
-DUT nodes.
-"""
-
-from resources.libraries.python.Constants import Constants
-from resources.libraries.python.ssh import exec_cmd_no_error
-from resources.libraries.python.topology import NodeType
-
-
-class L2fwdTest:
- """Setup the DPDK for l2fwd performance test."""
-
- @staticmethod
- def start_the_l2fwd_test(
- node, cpu_cores, nb_cores, queue_nums, jumbo_frames,
- rxq_size=1024, txq_size=1024):
- """
- Execute the l2fwd on the DUT node.
-
- :param node: Will execute the l2fwd on this node.
- :param cpu_cores: The DPDK run cores.
- :param nb_cores: The cores number for the forwarding.
- :param queue_nums: The queues number for the NIC.
- :param jumbo_frames: Indication if the jumbo frames are used (True) or
- not (False).
- :param rxq_size: RXQ size. Default=1024.
- :param txq_size: TXQ size. Default=1024.
- :type node: dict
- :type cpu_cores: str
- :type nb_cores: str
- :type queue_nums: str
- :type jumbo_frames: bool
- :type rxq_size: int
- :type txq_size: int
- :raises RuntimeError: If the script "run_l2fwd.sh" fails.
- """
- if node[u"type"] == NodeType.DUT:
- jumbo = u"yes" if jumbo_frames else u"no"
- command = f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts" \
- f"/run_l2fwd.sh {cpu_cores} {nb_cores} {queue_nums} {jumbo} " \
- f"{rxq_size} {txq_size}"
-
- message = f"Failed to execute l2fwd test at node {node['host']}"
-
- exec_cmd_no_error(node, command, timeout=1800, message=message)
diff --git a/resources/libraries/python/DPDK/L3fwdTest.py b/resources/libraries/python/DPDK/L3fwdTest.py
index 18becabd9b..46697cfdd5 100644
--- a/resources/libraries/python/DPDK/L3fwdTest.py
+++ b/resources/libraries/python/DPDK/L3fwdTest.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -16,7 +16,8 @@ This module exists to provide the l3fwd test for DPDK on topology nodes.
"""
from resources.libraries.python.Constants import Constants
-from resources.libraries.python.ssh import SSH
+from resources.libraries.python.DpdkUtil import DpdkUtil
+from resources.libraries.python.ssh import exec_cmd_no_error
from resources.libraries.python.topology import NodeType, Topology
@@ -24,33 +25,33 @@ class L3fwdTest:
"""Test the DPDK l3fwd performance."""
@staticmethod
- def start_the_l3fwd_test(
- nodes_info, dut_node, dut_if1, dut_if2, nb_cores, lcores_list,
- queue_nums, jumbo_frames):
+ def start_l3fwd(
+ nodes, node, if1, if2, lcores_list, nb_cores, queue_nums,
+ jumbo_frames):
"""
Execute the l3fwd on the dut_node.
- :param nodes_info: All the nodes info in the topology file.
- :param dut_node: Will execute the l3fwd on this node
- :param dut_if1: The test link interface 1.
- :param dut_if2: The test link interface 2.
- :param nb_cores: The cores number for the forwarding
+ :param nodes: All the nodes info in the topology file.
+ :param node: DUT node.
+ :param if1: The test link interface 1.
+ :param if2: The test link interface 2.
:param lcores_list: The lcore list string for the l3fwd routing
+ :param nb_cores: The cores number for the forwarding
:param queue_nums: The queues number for the NIC
:param jumbo_frames: Indication if the jumbo frames are used (True) or
not (False).
- :type nodes_info: dict
- :type dut_node: dict
- :type dut_if1: str
- :type dut_if2: str
- :type nb_cores: str
+ :type nodes: dict
+ :type node: dict
+ :type if1: str
+ :type if2: str
:type lcores_list: str
+ :type nb_cores: str
:type queue_nums: str
:type jumbo_frames: bool
"""
- if dut_node[u"type"] == NodeType.DUT:
- adj_mac0, adj_mac1 = L3fwdTest.get_adj_mac(
- nodes_info, dut_node, dut_if1, dut_if2
+ if node[u"type"] == NodeType.DUT:
+ adj_mac0, adj_mac1, if_pci0, if_pci1 = L3fwdTest.get_adj_mac(
+ nodes, node, if1, if2
)
list_cores = [int(item) for item in lcores_list.split(u",")]
@@ -65,79 +66,92 @@ class L3fwdTest:
port_config += f"({port}, {queue}, {list_cores[index]}),"
index += 1
- ssh = SSH()
- ssh.connect(dut_node)
+ if jumbo_frames:
+ l3fwd_args = DpdkUtil.get_l3fwd_args(
+ eal_corelist=f"0,{lcores_list}",
+ eal_driver=False,
+ eal_pci_whitelist0=if_pci0,
+ eal_pci_whitelist1=if_pci1,
+ eal_in_memory=True,
+ pmd_config=f"\\\"{port_config.rstrip(u',')}\\\"",
+ pmd_eth_dest_0=f"\\\"0,{adj_mac0}\\\"",
+ pmd_eth_dest_1=f"\\\"1,{adj_mac1}\\\"",
+ pmd_parse_ptype=True,
+ pmd_enable_jumbo=jumbo_frames,
+ pmd_max_pkt_len=jumbo_frames
+ )
+ else:
+ l3fwd_args = DpdkUtil.get_l3fwd_args(
+ eal_corelist=f"0,{lcores_list}",
+ eal_driver=False,
+ eal_pci_whitelist0=if_pci0,
+ eal_pci_whitelist1=if_pci1,
+ eal_in_memory=True,
+ pmd_config=f"\\\"{port_config.rstrip(u',')}\\\"",
+ pmd_eth_dest_0=f"\\\"0,{adj_mac0}\\\"",
+ pmd_eth_dest_1=f"\\\"1,{adj_mac1}\\\"",
+ pmd_parse_ptype=True
+ )
- cmd = f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts" \
- f"/run_l3fwd.sh \"{lcores_list}\" " \
- f"\"{port_config.rstrip(u',')}\" " \
- f"{adj_mac0} {adj_mac1} {u'yes' if jumbo_frames else u'no'}"
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\
+ f"/entry/run_l3fwd.sh \"{l3fwd_args} -P -L -p 0x3\""
+ message = f"Failed to execute l3fwd test at node {node['host']}"
+ exec_cmd_no_error(node, command, timeout=1800, message=message)
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=1800)
- if ret_code != 0:
- raise Exception(
- f"Failed to execute l3fwd test at node {dut_node[u'host']}"
- )
@staticmethod
- def get_adj_mac(nodes_info, dut_node, dut_if1, dut_if2):
+ def get_adj_mac(nodes, node, if1, if2):
"""
Get adjacency MAC addresses of the DUT node.
- :param nodes_info: All the nodes info in the topology file.
- :param dut_node: Will execute the l3fwd on this node
- :param dut_if1: The test link interface 1.
- :param dut_if2: The test link interface 2.
- :type nodes_info: dict
- :type dut_node: dict
- :type dut_if1: str
- :type dut_if2: str
- :returns: Returns MAC addresses of adjacency DUT nodes.
+ :param nodes: All the nodes info in the topology file.
+ :param node: DUT node.
+ :param if1: The test link interface 1.
+ :param if2: The test link interface 2.
+ :type nodes: dict
+ :type node: dict
+ :type if1: str
+ :type if2: str
+ :returns: Returns MAC addresses of adjacency DUT nodes and PCI
+ addresses.
:rtype: str
"""
- if_key0 = dut_if1
- if_key1 = dut_if2
- if_pci0 = Topology.get_interface_pci_addr(dut_node, if_key0)
- if_pci1 = Topology.get_interface_pci_addr(dut_node, if_key1)
+ if_key0 = if1
+ if_key1 = if2
+ if_pci0 = Topology.get_interface_pci_addr(node, if_key0)
+ if_pci1 = Topology.get_interface_pci_addr(node, if_key1)
- # detect which is the port 0
+ # Detect which is the port 0.
if min(if_pci0, if_pci1) != if_pci0:
if_key0, if_key1 = if_key1, if_key0
- L3fwdTest.patch_l3fwd(dut_node, u"patch_l3fwd_flip_routes")
+ L3fwdTest.patch_l3fwd(node, u"patch_l3fwd_flip_routes")
adj_node0, adj_if_key0 = Topology.get_adjacent_node_and_interface(
- nodes_info, dut_node, if_key0
+ nodes, node, if_key0
)
adj_node1, adj_if_key1 = Topology.get_adjacent_node_and_interface(
- nodes_info, dut_node, if_key1
+ nodes, node, if_key1
)
-
+ if_pci0 = Topology.get_interface_pci_addr(node, if_key0)
+ if_pci1 = Topology.get_interface_pci_addr(node, if_key1)
adj_mac0 = Topology.get_interface_mac(adj_node0, adj_if_key0)
adj_mac1 = Topology.get_interface_mac(adj_node1, adj_if_key1)
- return adj_mac0, adj_mac1
+ return adj_mac0, adj_mac1, if_pci0, if_pci1
@staticmethod
def patch_l3fwd(node, patch):
"""
Patch l3fwd application and recompile.
- :param node: Dictionary created from topology.
+ :param node: DUT node.
:param patch: Patch to apply.
:type node: dict
:type patch: str
:raises RuntimeError: Patching of l3fwd failed.
"""
- arch = Topology.get_node_arch(node)
-
- ssh = SSH()
- ssh.connect(node)
-
- ret_code, _, _ = ssh.exec_command(
- f"{Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts/patch_l3fwd.sh "
- f"{arch} {Constants.REMOTE_FW_DIR}/tests/dpdk/dpdk_scripts/{patch}",
- timeout=600
- )
-
- if ret_code != 0:
- raise RuntimeError(u"Patch of l3fwd failed.")
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\
+ f"/entry/patch_l3fwd.sh " \
+ f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}/{patch}"
+ message = f"Failed to patch l3fwd at node {node['host']}"
+ exec_cmd_no_error(node, command, timeout=1800, message=message)
diff --git a/resources/libraries/python/DPDK/TestpmdTest.py b/resources/libraries/python/DPDK/TestpmdTest.py
new file mode 100644
index 0000000000..1eccd7addf
--- /dev/null
+++ b/resources/libraries/python/DPDK/TestpmdTest.py
@@ -0,0 +1,85 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""This module implements functionality which sets L2 forwarding for DPDK on
+DUT nodes.
+"""
+
+from resources.libraries.python.Constants import Constants
+from resources.libraries.python.DpdkUtil import DpdkUtil
+from resources.libraries.python.ssh import exec_cmd_no_error
+from resources.libraries.python.topology import NodeType, Topology
+
+
+class TestpmdTest:
+ """Setup the DPDK for testpmd performance test."""
+
+ @staticmethod
+ def start_testpmd(
+ node, if1, if2, lcores_list, nb_cores, queue_nums,
+ jumbo_frames, rxq_size=1024, txq_size=1024):
+ """
+ Execute the testpmd on the DUT node.
+
+ :param node: DUT node.
+ :param if1: The test link interface 1.
+ :param if2: The test link interface 2.
+ :param lcores_list: The DPDK run cores.
+ :param nb_cores: The cores number for the forwarding.
+ :param queue_nums: The queues number for the NIC.
+ :param jumbo_frames: Indication if the jumbo frames are used (True) or
+ not (False).
+ :param rxq_size: RXQ size. Default=1024.
+ :param txq_size: TXQ size. Default=1024.
+ :type node: dict
+ :type if1: str
+ :type if2: str
+ :type lcores_list: str
+ :type nb_cores: str
+ :type queue_nums: str
+ :type jumbo_frames: bool
+ :type rxq_size: int
+ :type txq_size: int
+ :raises RuntimeError: If the script "run_testpmd.sh" fails.
+ """
+ if node[u"type"] == NodeType.DUT:
+ if_pci0 = Topology.get_interface_pci_addr(node, if1)
+ if_pci1 = Topology.get_interface_pci_addr(node, if2)
+
+ pmd_max_pkt_len = u"9200" if jumbo_frames else u"1518"
+ testpmd_args = DpdkUtil.get_testpmd_args(
+ eal_corelist=f"0,{lcores_list}",
+ eal_driver=False,
+ eal_pci_whitelist0=if_pci0,
+ eal_pci_whitelist1=if_pci1,
+ eal_in_memory=True,
+ pmd_num_mbufs=16384,
+ pmd_fwd_mode=u"io",
+ pmd_nb_ports=u"2",
+ pmd_portmask=u"0x3",
+ pmd_max_pkt_len=pmd_max_pkt_len,
+ pmd_mbuf_size=u"16384",
+ pmd_rxd=rxq_size,
+ pmd_txd=txq_size,
+ pmd_rxq=queue_nums,
+ pmd_txq=queue_nums,
+ pmd_nb_cores=nb_cores,
+ pmd_disable_link_check=True,
+ pmd_auto_start=True,
+ pmd_numa=True
+ )
+
+ command = f"{Constants.REMOTE_FW_DIR}/{Constants.RESOURCES_LIB_SH}"\
+ f"/entry/run_testpmd.sh \"{testpmd_args}\""
+ message = f"Failed to execute testpmd at node {node['host']}"
+ exec_cmd_no_error(node, command, timeout=1800, message=message)
diff --git a/resources/libraries/python/DpdkUtil.py b/resources/libraries/python/DpdkUtil.py
index 3a04cbd021..24c4d57652 100644
--- a/resources/libraries/python/DpdkUtil.py
+++ b/resources/libraries/python/DpdkUtil.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -32,9 +32,20 @@ class DpdkUtil:
options = OptionString(prefix=u"-")
options.add(u"v")
# Set the hexadecimal bitmask of the cores to run on.
- options.add_with_value_from_dict(u"l", u"eal_corelist", kwargs)
+ options.add_with_value_from_dict(
+ u"l", u"eal_corelist", kwargs
+ )
+ # Add a PCI device in white list.
+ options.add_with_value_from_dict(
+ u"w", u"eal_pci_whitelist0", kwargs
+ )
+ options.add_with_value_from_dict(
+ u"w", u"eal_pci_whitelist1", kwargs
+ )
# Set master core.
- options.add_with_value(u"-master-lcore", u"0")
+ options.add_with_value(
+ u"-master-lcore", u"0"
+ )
# Load an external driver. Multiple -d options are allowed.
options.add_with_value_if_from_dict(
u"d", u"/usr/lib/librte_pmd_virtio.so", u"eal_driver", kwargs, True
@@ -45,8 +56,8 @@ class DpdkUtil:
return options
@staticmethod
- def get_pmd_options(**kwargs):
- """Create PMD parameters options (without --).
+ def get_testpmd_pmd_options(**kwargs):
+ """Create PMD parameters options for testpmd (without --).
:param kwargs: List of testpmd parameters.
:type kwargs: dict
@@ -60,36 +71,77 @@ class DpdkUtil:
u"forward-mode", u"pmd_fwd_mode", kwargs, u"io"
)
# Set the number of packets per burst to N.
- options.add_equals(u"burst", 64)
+ options.add_equals(
+ u"burst", 64
+ )
# Set the number of descriptors in the TX rings to N.
- options.add_equals_from_dict(u"txd", u"pmd_txd", kwargs, 1024)
+ options.add_equals_from_dict(
+ u"txd", u"pmd_txd", kwargs, 1024
+ )
# Set the number of descriptors in the RX rings to N.
- options.add_equals_from_dict(u"rxd", u"pmd_rxd", kwargs, 1024)
+ options.add_equals_from_dict(
+ u"rxd", u"pmd_rxd", kwargs, 1024
+ )
# Set the number of queues in the TX to N.
- options.add_equals_from_dict(u"txq", u"pmd_txq", kwargs, 1)
+ options.add_equals_from_dict(
+ u"txq", u"pmd_txq", kwargs, 1
+ )
# Set the number of queues in the RX to N.
- options.add_equals_from_dict(u"rxq", u"pmd_rxq", kwargs, 1)
+ options.add_equals_from_dict(
+ u"rxq", u"pmd_rxq", kwargs, 1
+ )
# Set the hexadecimal bitmask of offloads.
- options.add_equals_from_dict(u"tx-offloads", u"pmd_tx_offloads", kwargs)
+ options.add_equals_from_dict(
+ u"tx-offloads", u"pmd_tx_offloads", kwargs, u"0x0"
+ )
+ # Enables numa aware allocation of mbufs.
+ options.add_if_from_dict(
+ u"numa", u"pmd_numa", kwargs, True
+ )
+ # Run by default.
+ options.add_if_from_dict(
+ u"auto-start", u"pmd_auto_start", kwargs, True
+ )
# Set the number of mbufs to be allocated in the mbuf pools.
options.add_equals_from_dict(
u"total-num-mbufs", u"pmd_num_mbufs", kwargs
)
- # Disable hardware VLAN.
+ # Set the number of forwarding ports.
+ options.add_equals_from_dict(
+ u"nb-ports", u"pmd_nb_ports", kwargs
+ )
+ # Set the hexadecimal bitmask of the ports used by the packet
+ # forwarding test.
+ options.add_equals_from_dict(
+ u"portmask", u"pmd_portmask", kwargs
+ )
+ # Disable link status check.
options.add_if_from_dict(
- u"disable-hw-vlan", u"pmd_disable_hw_vlan", kwargs, True
+ u"disable-link-check", u"pmd_disable_link_check", kwargs, True
)
# Set the MAC address XX:XX:XX:XX:XX:XX of the peer port N
- options.add_equals_from_dict(u"eth-peer", u"pmd_eth_peer_0", kwargs)
- options.add_equals_from_dict(u"eth-peer", u"pmd_eth_peer_1", kwargs)
+ options.add_equals_from_dict(
+ u"eth-peer", u"pmd_eth_peer_0", kwargs
+ )
+ options.add_equals_from_dict(
+ u"eth-peer", u"pmd_eth_peer_1", kwargs
+ )
# Set the max packet length.
- options.add_equals_from_dict(u"max-pkt-len", u"pmd_max_pkt_len", kwargs)
+ options.add_equals_from_dict(
+ u"max-pkt-len", u"pmd_max_pkt_len", kwargs
+ )
+ # Set the max packet length.
+ options.add_equals_from_dict(
+ u"mbuf-size", u"pmd_mbuf_size", kwargs
+ )
# Set the number of forwarding cores based on coremask.
- options.add_equals_from_dict(u"nb-cores", u"pmd_nb_cores", kwargs)
+ options.add_equals_from_dict(
+ u"nb-cores", u"pmd_nb_cores", kwargs
+ )
return options
@staticmethod
- def get_testpmd_cmdline(**kwargs):
+ def get_testpmd_args(**kwargs):
"""Get DPDK testpmd command line arguments.
:param kwargs: Key-value testpmd parameters.
@@ -98,10 +150,25 @@ class DpdkUtil:
:rtype: OptionString
"""
options = OptionString()
+ options.extend(DpdkUtil.get_eal_options(**kwargs))
+ options.add(u"--")
+ options.extend(DpdkUtil.get_testpmd_pmd_options(**kwargs))
+ return options
+
+ @staticmethod
+ def get_testpmd_cmdline(**kwargs):
+ """Get DPDK testpmd command line arguments with testpmd command.
+
+ :param kwargs: Key-value testpmd parameters.
+ :type kwargs: dict
+ :returns: Command line string.
+ :rtype: OptionString
+ """
+ options = OptionString()
options.add(u"testpmd")
options.extend(DpdkUtil.get_eal_options(**kwargs))
options.add(u"--")
- options.extend(DpdkUtil.get_pmd_options(**kwargs))
+ options.extend(DpdkUtil.get_testpmd_pmd_options(**kwargs))
return options
@staticmethod
@@ -117,7 +184,7 @@ class DpdkUtil:
cmd_options.add(u"/start-testpmd.sh")
cmd_options.extend(DpdkUtil.get_eal_options(**kwargs))
cmd_options.add(u"--")
- cmd_options.extend(DpdkUtil.get_pmd_options(**kwargs))
+ cmd_options.extend(DpdkUtil.get_testpmd_pmd_options(**kwargs))
exec_cmd_no_error(node, cmd_options, sudo=True, disconnect=True)
@staticmethod
@@ -130,3 +197,53 @@ class DpdkUtil:
"""
cmd = u"/stop-testpmd.sh" # Completed string, simple one.
exec_cmd_no_error(node, cmd, sudo=True, disconnect=True)
+
+ @staticmethod
+ def get_l3fwd_pmd_options(**kwargs):
+ """Create PMD parameters options for l3fwd (without --).
+
+ :param kwargs: List of l3fwd parameters.
+ :type kwargs: dict
+ :returns: PMD parameters.
+ :rtype: OptionString
+ """
+ options = OptionString(prefix=u"--")
+ # Set to use software to analyze packet type.
+ options.add_if_from_dict(
+ u"parse-ptype", u"pmd_parse_ptype", kwargs, True
+ )
+ # Set the MAC address XX:XX:XX:XX:XX:XX of the peer port N.
+ options.add_equals_from_dict(
+ u"eth-dest", u"pmd_eth_dest_0", kwargs
+ )
+ options.add_equals_from_dict(
+ u"eth-dest", u"pmd_eth_dest_1", kwargs
+ )
+ # Determines which queues from which ports are mapped to which cores.
+ options.add_equals_from_dict(
+ u"config", u"pmd_config", kwargs
+ )
+ # Enables jumbo frames.
+ options.add_if_from_dict(
+ u"enable-jumbo", u"pmd_enable_jumbo", kwargs, False
+ )
+ # Set the max packet length.
+ options.add_with_value_if_from_dict(
+ u"max-pkt-len", u"9200", u"pmd_max_pkt_len", kwargs, False
+ )
+ return options
+
+ @staticmethod
+ def get_l3fwd_args(**kwargs):
+ """Get DPDK l3fwd command line arguments.
+
+ :param kwargs: Key-value l3fwd parameters.
+ :type kwargs: dict
+ :returns: Command line string.
+ :rtype: OptionString
+ """
+ options = OptionString()
+ options.extend(DpdkUtil.get_eal_options(**kwargs))
+ options.add(u"--")
+ options.extend(DpdkUtil.get_l3fwd_pmd_options(**kwargs))
+ return options
diff --git a/resources/libraries/python/QemuUtils.py b/resources/libraries/python/QemuUtils.py
index 0113dc9e03..fb707d216b 100644
--- a/resources/libraries/python/QemuUtils.py
+++ b/resources/libraries/python/QemuUtils.py
@@ -254,15 +254,22 @@ class QemuUtils:
:param kwargs: Key-value pairs to construct command line parameters.
:type kwargs: dict
"""
+ pmd_max_pkt_len = u"9200" if kwargs[u"jumbo_frames"] else u"1518"
testpmd_cmd = DpdkUtil.get_testpmd_cmdline(
eal_corelist=f"0-{self._opt.get(u'smp') - 1}",
eal_driver=False,
+ eal_pci_whitelist0=u"0000:00:06.0",
+ eal_pci_whitelist1=u"0000:00:07.0",
eal_in_memory=True,
pmd_num_mbufs=16384,
+ pmd_fwd_mode=u"io",
+ pmd_nb_ports=u"2",
+ pmd_portmask=u"0x3",
+ pmd_max_pkt_len=pmd_max_pkt_len,
+ pmd_mbuf_size=u"16384",
pmd_rxq=kwargs[u"queues"],
pmd_txq=kwargs[u"queues"],
pmd_tx_offloads='0x0',
- pmd_disable_hw_vlan=False,
pmd_nb_cores=str(self._opt.get(u"smp") - 1)
)
@@ -274,18 +281,24 @@ class QemuUtils:
:param kwargs: Key-value pairs to construct command line parameters.
:type kwargs: dict
"""
+ pmd_max_pkt_len = u"9200" if kwargs[u"jumbo_frames"] else u"1518"
testpmd_cmd = DpdkUtil.get_testpmd_cmdline(
eal_corelist=f"0-{self._opt.get(u'smp') - 1}",
eal_driver=False,
+ eal_pci_whitelist0=u"0000:00:06.0",
+ eal_pci_whitelist1=u"0000:00:07.0",
eal_in_memory=True,
pmd_num_mbufs=16384,
pmd_fwd_mode=u"mac",
+ pmd_nb_ports=u"2",
+ pmd_portmask=u"0x3",
+ pmd_max_pkt_len=pmd_max_pkt_len,
+ pmd_mbuf_size=u"16384",
pmd_eth_peer_0=f"0,{kwargs[u'vif1_mac']}",
pmd_eth_peer_1=f"1,{kwargs[u'vif2_mac']}",
pmd_rxq=kwargs[u"queues"],
pmd_txq=kwargs[u"queues"],
pmd_tx_offloads=u"0x0",
- pmd_disable_hw_vlan=False,
pmd_nb_cores=str(self._opt.get(u"smp") - 1)
)
diff --git a/resources/libraries/python/autogen/Regenerator.py b/resources/libraries/python/autogen/Regenerator.py
index c6038588e6..3ef589d351 100644
--- a/resources/libraries/python/autogen/Regenerator.py
+++ b/resources/libraries/python/autogen/Regenerator.py
@@ -245,12 +245,41 @@ def write_default_files(in_filename, in_prolog, kwargs_list):
tmp2_filename
)
if u"DPDK" in in_prolog:
- check_suite_tag(old_suite_tag, tmp2_prolog)
- with open(tmp2_filename, u"wt") as file_out:
- file_out.write(tmp2_prolog)
- add_default_testcases(
- testcase, iface, old_suite_id, file_out, kwargs_list
+ for driver in Constants.DPDK_NIC_NAME_TO_DRIVER[nic_name]:
+ out_filename = replace_defensively(
+ tmp2_filename, old_suite_id,
+ Constants.DPDK_NIC_DRIVER_TO_SUITE_PREFIX[driver] \
+ + old_suite_id,
+ 1, u"Error adding driver prefix.", in_filename
+ )
+ out_prolog = replace_defensively(
+ tmp2_prolog, u"vfio-pci", driver, 1,
+ u"Driver name should appear once.", in_filename
+ )
+ out_prolog = replace_defensively(
+ out_prolog,
+ Constants.DPDK_NIC_DRIVER_TO_TAG[u"vfio-pci"],
+ Constants.DPDK_NIC_DRIVER_TO_TAG[driver], 1,
+ u"Driver tag should appear once.", in_filename
+ )
+ iface, suite_id, suite_tag = get_iface_and_suite_ids(
+ out_filename
+ )
+ # The next replace is probably a noop, but it is safer to
+ # maintain the same structure as for other edits.
+ out_prolog = replace_defensively(
+ out_prolog, old_suite_tag, suite_tag, 1,
+ f"Perf suite tag {old_suite_tag} should appear once.",
+ in_filename
)
+ check_suite_tag(suite_tag, out_prolog)
+ # TODO: Reorder loops so suite_id is finalized sooner.
+ testcase = Testcase.default(suite_id)
+ with open(out_filename, u"wt") as file_out:
+ file_out.write(out_prolog)
+ add_default_testcases(
+ testcase, iface, suite_id, file_out, kwargs_list
+ )
continue
for driver in Constants.NIC_NAME_TO_DRIVER[nic_name]:
out_filename = replace_defensively(
diff --git a/resources/libraries/robot/dpdk/default.robot b/resources/libraries/robot/dpdk/default.robot
index 021f73d8c3..15b61e7f04 100644
--- a/resources/libraries/robot/dpdk/default.robot
+++ b/resources/libraries/robot/dpdk/default.robot
@@ -14,13 +14,13 @@
*** Settings ***
| Library | resources.libraries.python.InterfaceUtil
| Library | resources.libraries.python.CpuUtils
-| Library | resources.libraries.python.DPDK.L2fwdTest
+| Library | resources.libraries.python.DPDK.TestpmdTest
| Library | resources.libraries.python.DPDK.L3fwdTest
| Library | Collections
*** Keywords ***
-| Start L2FWD on all DUTs
-| | [Documentation] | Start the l2fwd with M worker threads and rxqueues N and
+| Start testpmd on all DUTs
+| | [Documentation] | Start the testpmd with M worker threads and rxqueues N and
| | ... | jumbo support frames on/off on all DUTs.
| |
| | ... | *Arguments:*
@@ -30,7 +30,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Start L2FWD on all DUTs \| ${1} \| ${1} \| ${False} \|
+| | ... | \| Start testpmd on all DUTs \| ${1} \| ${1} \| ${False} \|
| |
| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo_frames}=${False}
| |
@@ -52,15 +52,16 @@
| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
| | | ... | Set variable | ${1}
| | | ... | ELSE | Set variable | ${rxq_count_int}
-| | | Start the l2fwd test | ${nodes['${dut}']} | ${cpus} | ${thr_count_int}
-| | | ... | ${rxq_count_int} | ${jumbo_frames}
+| | | Start testpmd
+| | | ... | ${nodes['${dut}']} | ${${dut}_pf1}[0] | ${${dut}_pf2}[0]
+| | | ... | ${cpus} | ${thr_count_int} | ${rxq_count_int} | ${jumbo_frames}
| | | ... | ${nic_rxq_size} | ${nic_txq_size}
| | | Run keyword if | ${thr_count_int} > 1
| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
| | END
-| Start L3FWD on all DUTs
+| Start l3fwd on all DUTs
| | [Documentation] | Start the l3fwd with M worker threads and rxqueues N and
| | ... | jumbo support frames on/off on all DUTs.
| |
@@ -71,7 +72,7 @@
| |
| | ... | *Example:*
| |
-| | ... | \| Start L3FWD on all DUTs \| ${1} \| ${1} \| ${False} \|
+| | ... | \| Start l3fwd on all DUTs \| ${1} \| ${1} \| ${False} \|
| |
| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | ${jumbo_frames}=${False}
| |
@@ -93,10 +94,9 @@
| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0
| | | ... | Set variable | ${1}
| | | ... | ELSE | Set variable | ${rxq_count_int}
-| | | Start the l3fwd test
-| | | ... | ${nodes} | ${nodes['${dut}']}
-| | | ... | ${${dut}_pf1}[0] | ${${dut}_pf2}[0]
-| | | ... | ${thr_count_int} | ${cpus} | ${rxq_count_int} | ${jumbo_frames}
+| | | Start l3fwd
+| | | ... | ${nodes} | ${nodes['${dut}']} | ${${dut}_pf1}[0] | ${${dut}_pf2}[0]
+| | | ... | ${cpus} | ${thr_count_int} | ${rxq_count_int} | ${jumbo_frames}
| | | Run keyword if | ${thr_count_int} > 1
| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD
| | | Set Tags | ${thr_count_int}T${cpu_count_int}C
diff --git a/resources/libraries/robot/shared/suite_setup.robot b/resources/libraries/robot/shared/suite_setup.robot
index 5f8c3c5b2f..0b1c0caa29 100644
--- a/resources/libraries/robot/shared/suite_setup.robot
+++ b/resources/libraries/robot/shared/suite_setup.robot
@@ -152,8 +152,8 @@
| | ... | Additional Setup for suites which uses dpdk.
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Initialize DPDK Environment | ${nodes['${dut}']}
-| | | ... | ${${dut}_${int}1}[0] | ${${dut}_${int}2}[0]
+| | | Initialize DPDK Framework | ${nodes['${dut}']}
+| | | ... | ${${dut}_${int}1}[0] | ${${dut}_${int}2}[0] | ${nic_driver}
| | END
| Additional Suite Setup Action For performance vf
diff --git a/resources/libraries/robot/shared/suite_teardown.robot b/resources/libraries/robot/shared/suite_teardown.robot
index 38683658d7..f76fddc9d6 100644
--- a/resources/libraries/robot/shared/suite_teardown.robot
+++ b/resources/libraries/robot/shared/suite_teardown.robot
@@ -46,7 +46,7 @@
| | ... | Additional teardown for suites which uses dpdk.
| |
| | FOR | ${dut} | IN | @{duts}
-| | | Cleanup DPDK Environment
+| | | Cleanup DPDK Framework
| | | ... | ${nodes['${dut}']} | ${${dut}_${int}1}[0] | ${${dut}_${int}2}[0]
| | END
diff --git a/tests/dpdk/dpdk_scripts/cleanup_dpdk.sh b/tests/dpdk/dpdk_scripts/cleanup_dpdk.sh
deleted file mode 100755
index a97b4ba121..0000000000
--- a/tests/dpdk/dpdk_scripts/cleanup_dpdk.sh
+++ /dev/null
@@ -1,86 +0,0 @@
-#!/bin/bash
-
-set -x
-
-# Setting variables
-DPDK_DIR=dpdk
-ROOTDIR=/tmp/openvpp-testing
-TESTPMDLOG=screenlog.0
-PWDDIR=$(pwd)
-
-# Setting command line arguments
-port1_driver=$1
-port1_pci=$2
-port2_driver=$3
-port2_pci=$4
-
-# Try to kill the testpmd
-sudo pgrep testpmd
-if [ $? -eq "0" ]; then
- success=false
- sudo pkill testpmd
- echo "RC = $?"
- for attempt in {1..60}; do
- echo "Checking if testpmd is still alive, attempt nr ${attempt}"
- sudo pgrep testpmd
- if [ $? -eq "1" ]; then
- echo "testpmd is dead"
- success=true
- break
- fi
- echo "testpmd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "$success" = false ]; then
- echo "The command sudo pkill testpmd failed"
- sudo pkill -9 testpmd
- echo "RC = $?"
- exit 1
- fi
-else
- echo "testpmd is not running"
-fi
-
-#also kill the l3fwd
-sudo pgrep l3fwd
-if [ $? -eq "0" ]; then
- success=false
- sudo pkill l3fwd
- echo "RC = $?"
- for attempt in {1..60}; do
- echo "Checking if l3fwd is still alive, attempt nr ${attempt}"
- sudo pgrep l3fwd
- if [ $? -eq "1" ]; then
- echo "l3fwd is dead"
- success=true
- break
- fi
- echo "l3fwd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "$success" = false ]; then
- echo "The command sudo pkill l3fwd failed"
- sudo pkill -9 l3fwd
- echo "RC = $?"
- exit 1
- fi
-else
- echo "l3fwd is not running"
-fi
-
-# Remove hugepages
-sudo rm -f /dev/hugepages/*
-
-# Unbind interfaces
-cd ${ROOTDIR}/${DPDK_DIR}/
-sudo ./usertools/dpdk-devbind.py -b ${port1_driver} ${port1_pci} || \
- { echo "Unbind ${port1_pci} failed"; exit 1; }
-sudo ./usertools/dpdk-devbind.py -b ${port2_driver} ${port2_pci} || \
- { echo "Unbind ${port1_pci} failed"; exit 1; }
-
-sleep 2
-
-if1_name=`./usertools/dpdk-devbind.py --s | grep "${port1_pci}" | sed -n 's/.*if=\(\S\)/\1/p' | awk -F' ' '{print $1}'`
-if2_name=`./usertools/dpdk-devbind.py --s | grep "${port2_pci}" | sed -n 's/.*if=\(\S\)/\1/p' | awk -F' ' '{print $1}'`
-
-cd ${PWDDIR}
diff --git a/tests/dpdk/dpdk_scripts/init_dpdk.sh b/tests/dpdk/dpdk_scripts/init_dpdk.sh
deleted file mode 100755
index 7d3df0a67c..0000000000
--- a/tests/dpdk/dpdk_scripts/init_dpdk.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-set -x
-
-# Setting variables
-DPDK_DIR=dpdk
-ROOTDIR=/tmp/openvpp-testing
-PWDDIR=$(pwd)
-
-# set arch, default to x86_64 if none given
-ARCH=${3:-"x86_64"}
-
-# dpdk prefers "arm64" to "aarch64" and does not allow arm64 native target
-if [ $ARCH == "aarch64" ]; then
- ARCH="arm64"
- MACHINE="armv8a"
-else
- MACHINE="native"
-fi
-
-cd ${ROOTDIR}/${DPDK_DIR}/
-
-# Binding
-./usertools/dpdk-devbind.py -b vfio-pci $1 $2 || \
- { echo "Failed to bind interface $1 and $2 to vfio-pci"; exit 1; }
-
-cd ${PWDDIR}
diff --git a/tests/dpdk/dpdk_scripts/install_dpdk.sh b/tests/dpdk/dpdk_scripts/install_dpdk.sh
deleted file mode 100755
index 05a922b457..0000000000
--- a/tests/dpdk/dpdk_scripts/install_dpdk.sh
+++ /dev/null
@@ -1,71 +0,0 @@
-#!/bin/bash
-
-set -x
-
-# Setting variables
-
-# set arch, default to x86_64 if none given
-ARCH=${1:-"x86_64"}
-
-# dpdk prefers "arm64" to "aarch64" and does not allow arm64 native target
-if [ $ARCH == "aarch64" ]; then
- ARCH="arm64"
- MACHINE="armv8a"
-else
- MACHINE="native"
-fi
-
-DPDK_DIR=dpdk
-ROOTDIR=/tmp/openvpp-testing
-PWDDIR=$(pwd)
-
-cd ${ROOTDIR}
-mkdir ${DPDK_DIR}
-tar -xvf download_dir/dpdk*.tar.xz --strip=1 --directory dpdk || \
- { echo "Failed to extract DPDK"; exit 1; }
-
-# Compile the DPDK
-cd ./${DPDK_DIR}
-sudo sed -i 's/^CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n/CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=y/g' ./config/common_base
-make install T=${ARCH}-${MACHINE}-linuxapp-gcc -j || \
- { echo "Failed to compile DPDK"; exit 1; }
-cd ${PWDDIR}
-
-# Compile the l3fwd
-export RTE_SDK=${ROOTDIR}/${DPDK_DIR}/
-export RTE_TARGET=${ARCH}-${MACHINE}-linuxapp-gcc
-cd ${RTE_SDK}/examples/l3fwd
-sudo sed -i 's/^#define RTE_TEST_RX_DESC_DEFAULT 128/#define RTE_TEST_RX_DESC_DEFAULT 1024/g' ./main.c
-sudo sed -i 's/^#define RTE_TEST_TX_DESC_DEFAULT 512/#define RTE_TEST_TX_DESC_DEFAULT 1024/g' ./main.c
-make -j || \
- { echo "Failed to compile l3fwd"; exit 1; }
-cd ${PWDDIR}
-
-# Check and setup the hugepages
-SYS_HUGEPAGE=$(cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages)
-echo " SYS_HUGEPAGE = ${SYS_HUGEPAGE}"
-if [ ${SYS_HUGEPAGE} -lt 4096 ]; then
- echo " It is not enough, should be at least 4096"
- MOUNT=$(mount | grep /mnt/huge)
- while [ "${MOUNT}" != "" ]
- do
- sudo umount /mnt/huge
- sleep 1
- MOUNT=$(mount | grep /mnt/huge)
- done
-
- echo 2048 | sudo tee /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
- echo 2048 | sudo tee /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
-
- echo " Mounting hugepages"
- sudo mkdir -p /mnt/huge
- sudo mount -t hugetlbfs nodev /mnt/huge/ || \
- { echo "Failed to mount hugepages"; exit 1; }
-fi
-
-# Check and set the max map count
-SYS_MAP=$(cat /proc/sys/vm/max_map_count)
-
-if [ ${SYS_MAP} -lt 200000 ]; then
- echo 200000 | sudo tee /proc/sys/vm/max_map_count
-fi
diff --git a/tests/dpdk/dpdk_scripts/patch_l3fwd.sh b/tests/dpdk/dpdk_scripts/patch_l3fwd.sh
deleted file mode 100755
index 54ae7eaffc..0000000000
--- a/tests/dpdk/dpdk_scripts/patch_l3fwd.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/bash
-
-set -x
-
-# Setting variables
-# set arch, default to x86_64 if none given
-ARCH=${1:-"x86_64"}
-PATCH=$2
-
-# dpdk prefers "arm64" to "aarch64" and does not allow arm64 native target
-if [ $ARCH == "aarch64" ]; then
- ARCH="arm64"
- MACHINE="armv8a"
-else
- MACHINE="native"
-fi
-
-DPDK_DIR=dpdk
-ROOTDIR=/tmp/openvpp-testing
-PWDDIR=$(pwd)
-
-# Compile the l3fwd
-export RTE_SDK=${ROOTDIR}/${DPDK_DIR}/
-export RTE_TARGET=${ARCH}-${MACHINE}-linuxapp-gcc
-cd ${RTE_SDK}/examples/l3fwd
-sudo sed -i 's/^#define RTE_TEST_RX_DESC_DEFAULT 128/#define RTE_TEST_RX_DESC_DEFAULT 2048/g' ./main.c
-sudo sed -i 's/^#define RTE_TEST_TX_DESC_DEFAULT 512/#define RTE_TEST_TX_DESC_DEFAULT 2048/g' ./main.c
-
-chmod +x ${PATCH} && source ${PATCH}
-
-make clean
-make -j || \
- { echo "Failed to compile l3fwd"; exit 1; }
-cd ${PWDDIR}
-
diff --git a/tests/dpdk/dpdk_scripts/run_l2fwd.sh b/tests/dpdk/dpdk_scripts/run_l2fwd.sh
deleted file mode 100755
index 0ec4f2d85f..0000000000
--- a/tests/dpdk/dpdk_scripts/run_l2fwd.sh
+++ /dev/null
@@ -1,148 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -xuo pipefail
-
-# Setting variables.
-DPDK_DIR="dpdk"
-ROOTDIR="/tmp/openvpp-testing"
-TESTPMDLOG="screenlog.0"
-PWDDIR="$(pwd)"
-
-# Setting command line arguments.
-cpu_corelist="${1}"
-nb_cores="${2}"
-queue_nums="${3}"
-jumbo_frames="${4}"
-rxd="${5:-128}"
-txd="${6:-512}"
-arch="$(uname -m)"
-
-# DPDK prefers "arm64" to "aarch64" and does not allow arm64 native target.
-if [ "${arch}" == "aarch64" ]; then
- arch="arm64"
- machine="armv8a"
-else
- machine="native"
-fi
-
-# Try to kill the testpmd.
-sudo pgrep testpmd
-if [ ${?} -eq "0" ]; then
- success=false
- sudo pkill testpmd
- echo "RC = ${?}"
- for attempt in {1..60}; do
- echo "Checking if testpmd is still alive, attempt nr ${attempt}"
- sudo pgrep testpmd
- if [ ${?} -eq "1" ]; then
- echo "testpmd is dead"
- success=true
- break
- fi
- echo "testpmd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "${success}" = false ]; then
- echo "The command sudo pkill testpmd failed"
- sudo pkill -9 testpmd
- echo "RC = ${?}"
- exit 1
- fi
-else
- echo "testpmd is not running"
-fi
-
-# Try to kill the l3fwd.
-sudo pgrep l3fwd
-if [ ${?} -eq "0" ]; then
- success=false
- sudo pkill l3fwd
- echo "RC = ${?}"
- for attempt in {1..60}; do
- echo "Checking if l3fwd is still alive, attempt nr ${attempt}"
- sudo pgrep l3fwd
- if [ ${?} -eq "1" ]; then
- echo "l3fwd is dead"
- success=true
- break
- fi
- echo "l3fwd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "${success}" = false ]; then
- echo "The command sudo pkill l3fwd failed"
- sudo pkill -9 l3fwd
- echo "RC = ${?}"
- exit 1
- fi
-else
- echo "l3fwd is not running"
-fi
-
-# Remove hugepages.
-sudo rm -f /dev/hugepages/*
-
-sleep 2
-
-cd "${ROOTDIR}/${DPDK_DIR}/"
-rm -f "${TESTPMDLOG}"
-TESTPMD_BIN="./${arch}-${machine}-linuxapp-gcc/app/testpmd"
-
-if [ "${jumbo_frames}" = "yes" ]; then
- sudo sh -c "screen -dmSL DPDK-test ${TESTPMD_BIN} \
- -l ${cpu_corelist} -n 4 --log-level 8 -v -- \
- --numa \
- --nb-ports=2 \
- --portmask=0x3 \
- --nb-cores=${nb_cores} \
- --max-pkt-len=9000 \
- --tx-offloads=0x7FFFFFFF \
- --forward-mode=io \
- --rxq=${queue_nums} \
- --txq=$((${nb_cores} + 1)) \
- --burst=64 \
- --rxd=${rxd} \
- --txd=${txd} \
- --disable-link-check \
- --auto-start"
-else
- sudo sh -c "screen -dmSL DPDK-test ${TESTPMD_BIN} \
- -l ${cpu_corelist} -n 4 --log-level 8 -v -- \
- --numa \
- --nb-ports=2 \
- --portmask=0x3 \
- --nb-cores=${nb_cores} \
- --forward-mode=io \
- --rxq=${queue_nums} \
- --txq=$((${nb_cores} + 1)) \
- --burst=64 \
- --rxd=${rxd} \
- --txd=${txd} \
- --disable-link-check \
- --auto-start"
-fi
-
-for attempt in {1..60}; do
- echo "Checking if testpmd is alive, attempt nr ${attempt}"
- fgrep "Press enter to exit" "${TESTPMDLOG}"
- if [ "${?}" -eq "0" ]; then
- exit 0
- fi
- sleep 1
-done
-cat "${TESTPMDLOG}"
-
-exit 1
diff --git a/tests/dpdk/dpdk_scripts/run_l3fwd.sh b/tests/dpdk/dpdk_scripts/run_l3fwd.sh
deleted file mode 100755
index bab7668f5c..0000000000
--- a/tests/dpdk/dpdk_scripts/run_l3fwd.sh
+++ /dev/null
@@ -1,126 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -xuo pipefail
-
-# Setting variables.
-DPDK_DIR="dpdk"
-ROOTDIR="/tmp/openvpp-testing"
-L3FWDLOG="screenlog.0"
-PWDDIR="$(pwd)"
-
-# Setting command line arguments.
-cpu_corelist="${1}"
-port_config="${2}"
-adj_mac0="${3}"
-adj_mac1="${4}"
-jumbo_frames="${5}"
-
-SCRIPT_NAME="$(basename $0)"
-
-# define a function to get the l3fwd PID.
-function get_l3fwd_pid()
-{
- pid_l3fwd=`sudo ps -elf | grep l3fwd | grep -v grep | grep -v SCREEN | grep -v ${SCRIPT_NAME} | awk '{print $4}'`
- echo "${pid_l3fwd}"
-}
-
-# Try to kill the l3fwd.
-# Don't use the pgrep and pkill.
-l3fwd_pid=`get_l3fwd_pid`
-echo "${l3fwd_pid}"
-if [ ! -z "${l3fwd_pid}" ]; then
- success=false
- sudo kill -15 "${l3fwd_pid}"
- echo "RC = ${?}"
- for attempt in {1..60}; do
- echo "Checking if l3fwd is still alive, attempt nr ${attempt}"
- l3fwd_pid=`get_l3fwd_pid`
- if [ -z "${l3fwd_pid}" ]; then
- echo "l3fwd is dead"
- success=true
- break
- fi
- echo "l3fwd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "${success}" = false ]; then
- echo "The command sudo kill -15 l3fwd failed"
- sudo kill -9 "${l3fwd_pid}"
- echo "RC = ${?}"
- exit 1
- fi
-else
- echo "l3fwd is not running"
-fi
-
-# Try to kill the testpmd.
-sudo pgrep testpmd
-if [ ${?} -eq "0" ]; then
- success=false
- sudo pkill testpmd
- echo "RC = ${?}"
- for attempt in {1..60}; do
- echo "Checking if testpmd is still alive, attempt nr ${attempt}"
- sudo pgrep testpmd
- if [ ${?} -eq "1" ]; then
- echo "testpmd is dead"
- success=true
- break
- fi
- echo "testpmd is still alive, waiting 1 second"
- sleep 1
- done
- if [ "${success}" = false ]; then
- echo "The command sudo pkill testpmd failed"
- sudo pkill -9 testpmd
- echo "RC = ${?}"
- exit 1
- fi
-else
- echo "testpmd is not running"
-fi
-
-# Remove hugepages.
-sudo rm -f /dev/hugepages/*
-
-sleep 2
-
-cd "${ROOTDIR}/${DPDK_DIR}/"
-rm -f "${L3FWDLOG}"
-if [ "${jumbo_frames}" = "yes" ]; then
- sudo sh -c "screen -dmSL DPDK-test ./examples/l3fwd/build/app/l3fwd \
- -l ${cpu_corelist} -n 4 --log-level 8 -- \
- -P -L -p 0x3 --config='${port_config}' \
- --enable-jumbo --max-pkt-len=9000 --eth-dest=0,${adj_mac0} \
- --eth-dest=1,${adj_mac1} --parse-ptype"
-else
- sudo sh -c "screen -dmSL DPDK-test ./examples/l3fwd/build/app/l3fwd \
- -l ${cpu_corelist} -n 4 --log-level 8 -- \
- -P -L -p 0x3 --config='${port_config}' \
- --eth-dest=0,${adj_mac0} --eth-dest=1,${adj_mac1} --parse-ptype"
-fi
-
-for attempt in {1..60}; do
- echo "Checking if l3fwd is alive, attempt nr ${attempt}"
- fgrep "L3FWD: entering main loop on lcore" "${L3FWDLOG}"
- if [ "${?}" -eq "0" ]; then
- cat "${L3FWDLOG}"
- exit 0
- fi
- sleep 1
-done
-
-exit 1
diff --git a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
index ae6ebb28b3..62dbd63be4 100644
--- a/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
+++ b/tests/dpdk/perf/10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
@@ -18,9 +18,11 @@
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA
| ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
| ... | eth-l2xcbase-testpmd
|
-| Suite Setup | Setup suite single link | performance | dpdk
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
| Suite Teardown | Tear down suite | performance | dpdk
|
| Test Template | Local Template
@@ -44,10 +46,14 @@
| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
*** Variables ***
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 1024
| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -63,8 +69,8 @@
| |
| | Set Test Variable | \${frame_size}
| |
-| | Set Max Rate And Jumbo
-| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
+| | Given Set Max Rate And Jumbo
+| | When Start testpmd on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
index 068a6145d7..ebacc7be06 100644
--- a/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
+++ b/tests/dpdk/perf/10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
@@ -18,9 +18,11 @@
|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA
| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
| ... | ethip4-ip4base-l3fwd
|
-| Suite Setup | Setup suite single link | performance | dpdk
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
| Suite Teardown | Tear down suite | performance | dpdk
|
| Test Template | Local Template
@@ -44,10 +46,14 @@
| ... | interfaces.
*** Variables ***
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 1024
| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd
@@ -63,8 +69,8 @@
| |
| | Set Test Variable | \${frame_size}
| |
-| | Set Max Rate And Jumbo
-| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
+| | Given Set Max Rate And Jumbo
+| | When Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
index 770c7f0b30..90ed4237be 100644
--- a/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
+++ b/tests/dpdk/perf/2n1l-10ge2p1x710-eth-l2xcbase-testpmd-ndrpdr.robot
@@ -18,9 +18,11 @@
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | HW_ENV | PERFTEST | NDRPDR | 1NUMA
| ... | NIC_Intel-X710 | DPDK | ETH | L2XCFWD | BASE
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
| ... | eth-l2xcbase-testpmd
|
-| Suite Setup | Setup suite single link | performance | dpdk
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
| Suite Teardown | Tear down suite | performance | dpdk
|
| Test Template | Local Template
@@ -44,10 +46,14 @@
| ... | MAC addresses are matching MAC addresses of the TG node interfaces.
*** Variables ***
-| ${osi_layer}= | L2
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 1024
| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L2
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
@@ -63,8 +69,8 @@
| |
| | Set Test Variable | \${frame_size}
| |
-| | Set Max Rate And Jumbo
-| | Given Start L2FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
+| | Given Set Max Rate And Jumbo
+| | When Start testpmd on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
index da9e5251ac..9a761758ff 100644
--- a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
+++ b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-ndrpdr.robot
@@ -18,9 +18,11 @@
|
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | 1NUMA
| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_1024 | TXQ_SIZE_1024
| ... | ethip4-ip4base-l3fwd
|
-| Suite Setup | Setup suite single link | performance | dpdk
+| Suite Setup | Setup suite topology interfaces | performance | dpdk
| Suite Teardown | Tear down suite | performance | dpdk
|
| Test Template | Local Template
@@ -44,10 +46,14 @@
| ... | interfaces.
*** Variables ***
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
| ${nic_rxq_size}= | 1024
| ${nic_txq_size}= | 1024
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | ${0}
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd
@@ -63,8 +69,8 @@
| |
| | Set Test Variable | \${frame_size}
| |
-| | Set Max Rate And Jumbo
-| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
+| | Given Set Max Rate And Jumbo
+| | When Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
diff --git a/tests/dpdk/perf/__init__.robot b/tests/dpdk/perf/__init__.robot
index 096bc8865b..a0c5f28667 100644
--- a/tests/dpdk/perf/__init__.robot
+++ b/tests/dpdk/perf/__init__.robot
@@ -21,7 +21,7 @@
|
| Suite Setup | Run Keywords | Setup performance global Variables
| ... | AND | Setup Framework | ${nodes}
-| ... | AND | Install DPDK test on all DUTs | ${nodes}
+| ... | AND | Install DPDK framework on all DUTs | ${nodes}
| ... | AND | Get CPU Info from All Nodes | ${nodes}
| ... | AND | Update All Interface Data on All Nodes | ${nodes}
| ... | skip_tg=${True} | skip_vpp=${True}