diff options
Diffstat (limited to 'GPL/traffic_profiles/trex/trex-stl-ethip4udp-4000u15p.py')
| -rw-r--r-- | GPL/traffic_profiles/trex/trex-stl-ethip4udp-4000u15p.py | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-4000u15p.py b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-4000u15p.py new file mode 100644 index 0000000000..7257dcc62d --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-4000u15p.py @@ -0,0 +1,158 @@ +# Copyright (c) 2023 Cisco and/or its affiliates. +# +# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later +# +# Licensed under the Apache License 2.0 or +# GNU General Public License v2.0 or later; you may not use this file +# except in compliance with one of these Licenses. You +# may obtain a copy of the Licenses at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html +# +# Note: If this file is linked with Scapy, which is GPLv2+, your use of it +# must be under GPLv2+. If at any point in the future it is no longer linked +# with Scapy (or other GPLv2+ licensed software), you are free to choose +# Apache 2. +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Stream profile for T-rex traffic generator. + +Stream profile: + - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 20.0.0.0 - 20.0.15.159 + - Destination IP address range: 12.0.0.2 + - Source UDP port range: 1024 - 1038 + - Destination UDP port range: 1024 + - Direction 1 --> 0: + - Source IP address range: 12.0.0.2 + - Destination IP address range: 200.0.0.0 + - Source UDP port range: 1024 + - Destination UDP port range: 1024 - 61022 +""" + +from trex.stl.api import * +from profile_trex_stateless_base_class import TrafficStreamsBaseClass + + +class TrafficStreams(TrafficStreamsBaseClass): + """Stream profile.""" + + def __init__(self): + """Initialization and setting of streams' parameters.""" + + super(TrafficStreamsBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"20.0.0.0" + self.p1_src_end_ip = u"20.0.15.159" + self.p1_dst_start_ip = u"12.0.0.2" + + self.p2_src_start_ip = u"12.0.0.2" + self.p2_src_end_ip = u"12.0.0.2" + self.p2_dst_start_ip = u"200.0.0.0" + + # UDP ports used in packet headers. + self.p1_src_start_udp_port = 1024 + self.p1_src_end_udp_port = 1038 + self.p1_dst_start_udp_port = 1024 + + self.p2_src_start_udp_port = 1024 + self.p2_dst_start_udp_port = 1024 + self.p2_dst_end_udp_port = 61022 + + def define_packets(self): + """Defines the packets to be sent from the traffic generator. + + Packet definition: | ETH | IP | UDP | + + :returns: Packets to be sent from the traffic generator. + :rtype: tuple + """ + + # Direction 0 --> 1 + base_pkt_a = ( + Ether() / + IP( + src=self.p1_src_start_ip, + dst=self.p1_dst_start_ip, + proto=17 + ) / + UDP( + sport=self.p1_src_start_udp_port, + dport=self.p1_dst_start_udp_port + ) + ) + # Direction 1 --> 0 + base_pkt_b = ( + Ether() / + IP( + src=self.p2_src_start_ip, + dst=self.p2_dst_start_ip, + proto=17 + ) / + UDP( + sport=self.p2_src_start_udp_port, + dport=self.p2_dst_start_udp_port + ) + ) + + # Direction 0 --> 1 + vm1 = STLScVmRaw( + [ + STLVmTupleGen( + ip_min=self.p1_src_start_ip, + ip_max=self.p1_src_end_ip, + port_min=self.p1_src_start_udp_port, + port_max=self.p1_src_end_udp_port, + name=u"tuple" + ), + STLVmWrFlowVar( + fv_name=u"tuple.ip", + pkt_offset=u"IP.src" + ), + STLVmFixIpv4( + offset=u"IP" + ), + STLVmWrFlowVar( + fv_name=u"tuple.port", + pkt_offset=u"UDP.sport" + ) + ] + ) + # Direction 0 --> 1 + vm2 = STLScVmRaw( + [ + STLVmFlowVar( + name=u"dport", + min_value=self.p2_dst_start_udp_port, + max_value=self.p2_dst_end_udp_port, + size=2, + op=u"inc" + ), + STLVmWrFlowVar( + fv_name=u"dport", + pkt_offset=u"UDP.dport" + ) + ] + ) + + return base_pkt_a, base_pkt_b, vm1, vm2 + + +def register(): + """Register this traffic profile to T-rex. + + Do not change this function. + + :return: Traffic streams. + :rtype: Object + """ + return TrafficStreams() |