diff options
Diffstat (limited to 'GPL/traffic_profiles')
20 files changed, 1340 insertions, 70 deletions
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py new file mode 100644 index 0000000000..24fd6f3cb2 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.3.255 + - Destination IP address range: 20.0.0.0 - 20.0.3.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines TCP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.3.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=64512, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py index 809a954a30..a86355b365 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py new file mode 100644 index 0000000000..231edf37bc --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.63.255 + - Destination IP address range: 20.0.0.0 - 20.0.63.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines TCP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.63.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.63.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=1032192, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py index 0d7f9a5974..4899726fc2 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py new file mode 100644 index 0000000000..4d7215b77d --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 172.16.0.0 - 172.19.255.255 + - Destination IP address range: 20.16.0.0 - 20.19.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines TCP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"172.16.0.0" + self.p1_src_end_ip = u"172.19.255.255" + self.p1_dst_start_ip = u"20.16.0.0" + self.p1_dst_end_ip = u"20.19.255.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=16515072, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py index 6f533844e0..d52d293c92 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py new file mode 100644 index 0000000000..73095e2d9d --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.15.255 + - Destination IP address range: 20.0.0.0 - 20.0.15.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines TCP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.15.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.15.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=258048, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py index acfc5e109a..4ff89a8acb 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py new file mode 100644 index 0000000000..2160bd27a7 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py @@ -0,0 +1,117 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. + +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / TCP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.255.255 + - Destination IP address range: 20.0.0.0 - 20.0.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines TCP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.255.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.255.255" + + # Headers length; not used in this profile, just for the record of + # header length for TCP packet with 0B payload + self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options + self.data_size = 11111 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates, None + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + # client commands + prog_c = ASTFProgram() + prog_c.connect() + prog_c.send(u"1" * self.data_size) + prog_c.recv(self.data_size) + + # server commands + prog_s = ASTFProgram() + prog_s.accept() + prog_c.recv(self.data_size) + prog_c.send(u"1" * self.data_size) + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=4128768, # TODO: set via input parameter + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py index 7d2f5b6265..e5786f4f05 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py @@ -25,6 +25,9 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up and tears down TCP session. +No delays, no data transfer. """ from trex.astf.api import * @@ -49,9 +52,6 @@ class TrafficProfile(TrafficProfileBaseClass): # header length for TCP packet with 0B payload self.headers_size = 58 # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options - # Delay for keeping tcp sessions active - self.delay = 2000000 # delay 2s (2,000,000 usec) - def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -68,8 +68,6 @@ class TrafficProfile(TrafficProfileBaseClass): prog_c.connect() # receive syn-ack (0B sent in tcp syn-ack packet) and send ack prog_c.recv(0) - # wait defined time, then send fin-ack - prog_c.delay(self.delay) # server commands prog_s = ASTFProgram() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py new file mode 100644 index 0000000000..842ff287a9 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py @@ -0,0 +1,143 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.3.255 + - Destination IP address range: 20.0.0.0 - 20.0.3.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines UDP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.3.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.3.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 64512 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py index 6bf0d53d1f..dbe97cc440 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py new file mode 100644 index 0000000000..5b4ff005d5 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py @@ -0,0 +1,143 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.63.255 + - Destination IP address range: 20.0.0.0 - 20.0.63.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines UDP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.63.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.63.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 1032192 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py index 9237831aa5..7acebaaeaf 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py new file mode 100644 index 0000000000..7ec61dc2e5 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py @@ -0,0 +1,143 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 172.16.0.0 - 172.19.255.255 + - Destination IP address range: 20.16.0.0 - 20.19.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines UDP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"172.16.0.0" + self.p1_src_end_ip = u"172.19.255.255" + self.p1_dst_start_ip = u"20.16.0.0" + self.p1_dst_end_ip = u"20.19.255.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 16515072 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py index 728eba8a04..e8796ec166 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py new file mode 100644 index 0000000000..092384b884 --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py @@ -0,0 +1,143 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.15.255 + - Destination IP address range: 20.0.0.0 - 20.0.15.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines UDP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.15.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.15.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 258048 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py index 0807175d36..da367b4ca4 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py new file mode 100644 index 0000000000..45810922ab --- /dev/null +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py @@ -0,0 +1,143 @@ +# Copyright (c) 2020 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +"""Traffic profile for T-rex advanced stateful (astf) traffic generator. +Traffic profile: + - Two streams sent in directions 0 --> 1 (client -> server, requests) and + 1 --> 0 (server -> client, responses) at the same time. + - Packet: ETH / IP / UDP + - Direction 0 --> 1: + - Source IP address range: 192.168.0.0 - 192.168.255.255 + - Destination IP address range: 20.0.0.0 - 20.0.255.255 + - Direction 1 --> 0: + - Source IP address range: destination IP address from packet received + on port 1 + - Destination IP address range: source IP address from packet received + on port 1 + +This is a profile for PPS tests, it combines UDP connect and data transfer. +No delays, server response waits for full request. +""" + +from trex.astf.api import * +from profile_trex_astf_base_class import TrafficProfileBaseClass + + +class TrafficProfile(TrafficProfileBaseClass): + """Traffic profile.""" + + def __init__(self, **kwargs): + """Initialization and setting of profile parameters.""" + + super(TrafficProfileBaseClass, self).__init__() + + # IPs used in packet headers. + self.p1_src_start_ip = u"192.168.0.0" + self.p1_src_end_ip = u"192.168.255.255" + self.p1_dst_start_ip = u"20.0.0.0" + self.p1_dst_end_ip = u"20.0.255.255" + + self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B UDP + + self.udp_data = u"" + + self.n_data = 32 # TODO: set via input parameter + self.m_delay = 1200000 # delay 1200s (1,200,000 ms) + self.u_delay = 1000 * self.m_delay # delay 1200s (1,200,000,000 us) + self.limit = 4128768 + + def define_profile(self): + """Define profile to be used by advanced stateful traffic generator. + + This method MUST return: + + return ip_gen, templates + + :returns: IP generator and profile templates for ASTFProfile(). + :rtype: tuple + """ + if self.framesize == 64: + self.udp_data += self._gen_padding(self.headers_size, 72) + if self.framesize == 1518: + self.udp_data += self._gen_padding(self.headers_size, 1514) + + # Client program. + prog_c = ASTFProgram(stream=False) + prog_c.set_keepalive_msg(self.m_delay) + prog_c.send_msg(self.udp_data) + # No delay, PPS tests combine connect and data send (no data receive). + prog_c.set_var(u"var1", self.n_data) + prog_c.set_label(u"a:") + prog_c.send_msg(self.udp_data) + prog_c.jmp_nz(u"var1", u"a:") + # We should read the server response, + # but no reason to overload client workers even more. + + # Server program. + prog_s = ASTFProgram(stream=False) + prog_s.set_keepalive_msg(self.m_delay) + # If server closes too soon, new instances are started + # leading in too much replies. To prevent that, we need to recv all. + prog_s.recv_msg(1 + self.n_data) + # In packet loss scenarios, some instances never get here. + # This maybe increases server traffic duration, + # but no other way if we want to avoid + # TRex creating a second instance of the same server. + prog_s.send_msg(self.udp_data) + prog_s.set_var(u"var2", self.n_data) + prog_s.set_label(u"b:") + prog_s.send_msg(self.udp_data) + prog_s.jmp_nz(u"var2", u"b:") + # VPP never duplicates packets, + # so it is safe to close the server instance now. + + # ip generators + ip_gen_c = ASTFIPGenDist( + ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], + distribution=u"seq" + ) + ip_gen_s = ASTFIPGenDist( + ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip], + distribution=u"seq" + ) + ip_gen = ASTFIPGen( + glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"), + dist_client=ip_gen_c, + dist_server=ip_gen_s + ) + + # server association + s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080)) + + # template + temp_c = ASTFTCPClientTemplate( + program=prog_c, + ip_gen=ip_gen, + limit=self.limit, + port=8080 + ) + temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc) + template = ASTFTemplate(client_template=temp_c, server_template=temp_s) + + return ip_gen, template, None + + +def register(): + """Register this traffic profile to T-Rex. + + Do not change this function. + + :return: Traffic Profiles. + :rtype: Object + """ + return TrafficProfile() diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py index 85eaff005c..9aba56a3e4 100644 --- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py +++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py @@ -25,6 +25,10 @@ Traffic profile: on port 1 - Destination IP address range: source IP address from packet received on port 1 + +This is a profile for CPS tests, it only sets up UDP session. +No delays, no data transfer. +Keepalive mechanism cannot be disabled, so it is at least set to long waits. """ from trex.astf.api import * @@ -54,7 +58,7 @@ class TrafficProfile(TrafficProfileBaseClass): self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp # Required UDP keepalive value for T-Rex - self.udp_keepalive = 2000 # 2s (2,000 msec) + self.udp_keepalive = 2000*1000*100 # 200000s (200,000,000 msec) def define_profile(self): """Define profile to be used by advanced stateful traffic generator. @@ -70,28 +74,20 @@ class TrafficProfile(TrafficProfileBaseClass): # client commands prog_c = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # send REQ message prog_c.send_msg(self.udp_req) # receive RES message prog_c.recv_msg(1) - prog_c.delay(self.udp_keepalive * 1000) # delay is defined in usec - # server commands prog_s = ASTFProgram(stream=False) - # set the keepalive timer for UDP flows to not close udp session - # immediately after packet exchange prog_c.set_keepalive_msg(self.udp_keepalive) # receive REQ message prog_s.recv_msg(1) # send RES message prog_s.send_msg(self.udp_res) - prog_s.delay(self.udp_keepalive * 1000) # delay is defined in usec - # ip generators ip_gen_c = ASTFIPGenDist( ip_range=[self.p1_src_start_ip, self.p1_src_end_ip], |