diff options
Diffstat (limited to 'bootstrap-centos.sh')
| -rwxr-xr-x | bootstrap-centos.sh | 388 |
1 files changed, 388 insertions, 0 deletions
diff --git a/bootstrap-centos.sh b/bootstrap-centos.sh new file mode 100755 index 0000000000..6f8fba00b6 --- /dev/null +++ b/bootstrap-centos.sh @@ -0,0 +1,388 @@ +#!/bin/bash +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +set -x + +cat /etc/hostname +cat /etc/hosts + +sudo apt-get -y update +sudo apt-get -y install libpython2.7-dev python-virtualenv + +VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") + +VIRL_USERNAME=jenkins-in +VIRL_PKEY=priv_key +VIRL_SERVER_STATUS_FILE="status" +VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" + +VIRL_TOPOLOGY=double-ring-nested.centos7 +VIRL_RELEASE=csit-centos-7.3-1611 + +SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" + +TEST_GROUPS=("l2bd,dhcp,gre,honeycomb,l2xc,lisp,softwire" "cop,telemetry,ipsec,ipv6,rpf,tap,vrf" "fds,iacl,ipv4,policer,vlan,vxlan") +SUITE_PATH="tests.func" + +SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" + +# Create tmp dir +mkdir ${SCRIPT_DIR}/tmp + +# Use tmp dir to store log files +LOG_PATH="${SCRIPT_DIR}/tmp" + +# Use tmp dir for tarballs +export TMPDIR="${SCRIPT_DIR}/tmp" + +SHARED_MEMORY_PATH="/run/shm" + +function ssh_do() { + echo + echo "### " ssh $@ + ssh ${SSH_OPTIONS} $@ +} + +rm -f ${VIRL_PKEY} +cat > ${VIRL_PKEY} <<EOF +-----BEGIN RSA PRIVATE KEY----- +MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6 +GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX +VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9 +asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz +L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J +73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76 +gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb +4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN +e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV +SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J +kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI +ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa +MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY +RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa +YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0 +2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab +UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV +IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I +wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS +NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM +xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj +yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS +U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ +cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh +maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E= +-----END RSA PRIVATE KEY----- +EOF +chmod 600 ${VIRL_PKEY} + +# +# Pick a random host from the array of VIRL servers for every test set run +# and attempt to reach it and verify it's status. +# +# The server must be reachable and have a "status" file with +# the content "PRODUCTION" to be selected. +# +# If the server is not reachable or does not have the correct +# status remove it from the array and start again. +# +# Abort if there are no more servers left in the array. +# +for index in "${!TEST_GROUPS[@]}"; do + VIRL_SERVER[${index}]="" + while [[ ! "${VIRL_SERVER[${index}]}" ]]; do + num_hosts=${#VIRL_SERVERS[@]} + if [ $num_hosts == 0 ] + then + echo "No more VIRL candidate hosts available, failing." + exit 127 + fi + element=$[ $RANDOM % $num_hosts ] + virl_server_candidate=${VIRL_SERVERS[$element]} + virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1) + echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\" + if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] + then + # Candidate is in good status. Select this server. + VIRL_SERVER[${index}]="$virl_server_candidate" + else + # Candidate is in bad status. Remove from array. + VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}") + fi + done +done + +echo "Selected VIRL servers: ${VIRL_SERVER[@]}" + +# Temporarily download VPP packages from nexus.fd.io +if [ "${#}" -ne "0" ]; then + arr=(${@}) + echo ${arr[0]} + # DPDK is not part of the vpp build + DPDK_STABLE_VER=$(cat ${SCRIPT_DIR}/DPDK_STABLE_VER) + wget -q "${VPP_REPO_URL}/vpp-dpdk-dev/${DPDK_STABLE_VER}/vpp-dpdk-dev-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-dpdk-dkms/${DPDK_STABLE_VER}/vpp-dpdk-dkms-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit +else + rm -f *.rpm + DPDK_STABLE_VER=$(cat ${SCRIPT_DIR}/DPDK_STABLE_VER) + VPP_STABLE_VER=$(cat ${SCRIPT_DIR}/VPP_STABLE_VER) + VPP_REPO_URL=$(cat ${SCRIPT_DIR}/VPP_REPO_URL_CENTOS) + VPP_CLASSIFIER="-rpm" + wget -q "${VPP_REPO_URL}/vpp/${VPP_STABLE_VER}/vpp-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-dbg/${VPP_STABLE_VER}/vpp-dbg-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-dev/${VPP_STABLE_VER}/vpp-dev-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-dpdk-dev/${DPDK_STABLE_VER}/vpp-dpdk-dev-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-lib/${VPP_STABLE_VER}/vpp-lib-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit + wget -q "${VPP_REPO_URL}/vpp-plugins/${VPP_STABLE_VER}/vpp-plugins-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit +fi + +VPP_RPMS=(*.rpm) +echo ${VPP_RPMS[@]} +VIRL_DIR_LOC="/tmp" +VPP_RPMS_FULL=(${VPP_RPMS[@]}) + +# Prepend directory location at remote host to rpm list +for index in "${!VPP_RPMS_FULL[@]}"; do + VPP_RPMS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_RPMS_FULL[${index}]} +done + +echo "Updated file names: " ${VPP_RPMS_FULL[@]} + +cat ${VIRL_PKEY} + +# Copy the files to VIRL hosts +DONE="" +for index in "${!VIRL_SERVER[@]}"; do + # Do not copy files in case they have already been copied to the VIRL host + [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1 + + if [ "${copy}" -eq "0" ]; then + echo "VPP rpms have already been copied to the VIRL host ${VIRL_SERVER[${index}]}" + else + scp ${SSH_OPTIONS} *.rpm \ + ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/ + + result=$? + if [ "${result}" -ne "0" ]; then + echo "Failed to copy VPP rpms to VIRL host ${VIRL_SERVER[${index}]}" + echo ${result} + exit ${result} + else + echo "VPP rpms successfully copied to the VIRL host ${VIRL_SERVER[${index}]}" + fi + DONE+=(${VIRL_SERVER[${index}]}) + fi +done + +# Start a simulation on VIRL server + +function stop_virl_simulation { + for index in "${!VIRL_SERVER[@]}"; do + ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ + "stop-testcase ${VIRL_SID[${index}]}" + done +} + +# Upon script exit, cleanup the simulation execution +trap stop_virl_simulation EXIT + +for index in "${!VIRL_SERVER[@]}"; do + echo "Starting simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" + VIRL_SID[${index}]=$(ssh ${SSH_OPTIONS} \ + ${VIRL_USERNAME}@${VIRL_SERVER[${index}]} \ + "start-testcase -c ${VIRL_TOPOLOGY} -r ${VIRL_RELEASE} ${VPP_RPMS_FULL[@]}") + retval=$? + if [ ${retval} -ne "0" ]; then + echo "VIRL simulation start failed on ${VIRL_SERVER[${index}]}" + exit ${retval} + fi + if [[ ! "${VIRL_SID[${index}]}" =~ session-[a-zA-Z0-9_]{6} ]]; then + echo "No VIRL session ID reported." + exit 127 + fi + echo "VIRL simulation started on ${VIRL_SERVER[${index}]}" + + ssh_do ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ + cat /scratch/${VIRL_SID[${index}]}/topology.yaml + + # Download the topology file from VIRL session and rename it + scp ${SSH_OPTIONS} \ + ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:/scratch/${VIRL_SID[${index}]}/topology.yaml \ + topologies/enabled/topology${index}.yaml + + retval=$? + if [ ${retval} -ne "0" ]; then + echo "Failed to copy topology file from VIRL simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" + exit ${retval} + fi +done + +echo ${VIRL_SID[@]} + +virtualenv --system-site-packages env +. env/bin/activate + +echo pip install +pip install -r ${SCRIPT_DIR}/requirements.txt + +for index in "${!VIRL_SERVER[@]}"; do + pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \ + -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \ + -d ${SCRIPT_DIR}/topologies/enabled/topology${index}.yaml \ + -vvv + if [ "$?" -ne "0" ]; then + echo "Topology${index} schema validation failed." + echo "However, the tests will start." + fi +done + +function run_test_set() { + set +x + OLDIFS=$IFS + IFS="," + nr=$(echo $1) + rm -f ${LOG_PATH}/test_run${nr}.log + exec &> >(while read line; do echo "$(date +'%H:%M:%S') $line" \ + >> ${LOG_PATH}/test_run${nr}.log; done;) + suite_str="" + for suite in ${TEST_GROUPS[${nr}]}; do + suite_str="${suite_str} --suite ${SUITE_PATH}.${suite}" + done + IFS=$OLDIFS + + echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\ + -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ + ${suite_str} \ + --include vm_envAND3_node_single_link_topo \ + --include vm_envAND3_node_double_link_topo \ + --exclude PERFTEST \ + --exclude SKIP_PATCH \ + --noncritical EXPECTED_FAILING \ + --output ${LOG_PATH}/log_test_set_run${nr} \ + tests/" + + PYTHONPATH=`pwd` pybot -L TRACE -W 136\ + -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ + ${suite_str} \ + --include vm_envAND3_node_single_link_topo \ + --include vm_envAND3_node_double_link_topo \ + --exclude PERFTEST \ + --exclude SKIP_PATCH \ + --noncritical EXPECTED_FAILING \ + --output ${LOG_PATH}/log_test_set_run${nr} \ + tests/ + + local_run_rc=$? + echo ${local_run_rc} > ${SHARED_MEMORY_PATH}/rc_test_run${nr} + set -x +} + +set +x +# Send to background an instance of the run_test_set() function for each number, +# record the pid. +for index in "${!VIRL_SERVER[@]}"; do + run_test_set ${index} & + pid=$! + echo "Sent to background: Test_set${index} (pid=$pid)" + pids[$pid]=$index +done + +echo +echo -n "Waiting..." + +# Watch the stable of background processes. +# If a pid goes away, remove it from the array. +while [ -n "${pids[*]}" ]; do + for i in $(seq 0 9); do + sleep 1 + echo -n "." + done + for pid in "${!pids[@]}"; do + if ! ps "$pid" >/dev/null; then + echo -e "\n" + echo "Test_set${pids[$pid]} with PID $pid finished." + unset pids[$pid] + fi + done + if [ -z "${!pids[*]}" ]; then + break + fi + echo -n -e "\nStill waiting for test set(s): ${pids[*]} ..." +done + +echo +echo "All test set runs finished." +echo + +set -x + +RC=0 +for index in "${!VIRL_SERVER[@]}"; do + echo "Test_set${index} log:" + cat ${LOG_PATH}/test_run${index}.log + RC_PARTIAL_RUN=$(cat ${SHARED_MEMORY_PATH}/rc_test_run${index}) + RC=$((RC+RC_PARTIAL_RUN)) + rm -f ${SHARED_MEMORY_PATH}/rc_test_run${index} + rm -f ${LOG_PATH}/test_run${index}.log + echo +done + +# Log the final result +if [ "${RC}" -eq "0" ]; then + set +x + echo + echo "========================================================================================================================================" + echo "Final result of all test loops: | PASS |" + echo "All critical tests have passed." + echo "========================================================================================================================================" + echo + set -x +else + if [ "${RC}" -eq "1" ]; then + HLP_STR="test has" + else + HLP_STR="tests have" + fi + set +x + echo + echo "========================================================================================================================================" + echo "Final result of all test loops: | FAIL |" + echo "${RC} critical ${HLP_STR} failed." + echo "========================================================================================================================================" + echo + set -x +fi + +echo Post-processing test data... + +partial_logs="" +for index in "${!VIRL_SERVER[@]}"; do + partial_logs="${partial_logs} ${LOG_PATH}/log_test_set_run${index}.xml" +done + +# Rebot output post-processing +rebot --noncritical EXPECTED_FAILING \ + --output output.xml ${partial_logs} + +# Remove unnecessary log files +rm -f ${partial_logs} + +echo Post-processing finished. + +if [ ${RC} -eq 0 ]; then + RETURN_STATUS=0 +else + RETURN_STATUS=1 +fi + +exit ${RETURN_STATUS} |