1 files changed, 0 insertions, 384 deletions
diff --git a/bootstrap-centos.sh b/bootstrap-centos.sh
deleted file mode 100755
index b7c6891ef6..0000000000
--- a/bootstrap-centos.sh
+++ /dev/null
@@ -1,384 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -x
-
-cat /etc/hostname
-cat /etc/hosts
-
-sudo yum install -y python-devel python-virtualenv
-
-VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
-
-VIRL_USERNAME=jenkins-in
-VIRL_PKEY=priv_key
-VIRL_SERVER_STATUS_FILE="status"
-VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
-
-SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-
-VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_CENTOS)
-VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_CENTOS)
-
-SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
-
-TEST_GROUPS=("gre,ipv6,lisp,policer,rpf,softwire" "dhcp,ipsec,l2bd,l2xc,telemetry,vrf,vxlan" "cop,fds,honeycomb,iacl,ipv4,tap,vhost,vlan")
-SUITE_PATH="tests.func"
-SKIP_PATCH="SKIP_PATCH"
-
-# Create tmp dir
-mkdir ${SCRIPT_DIR}/tmp
-
-# Use tmp dir to store log files
-LOG_PATH="${SCRIPT_DIR}/tmp"
-
-# Use tmp dir for tarballs
-export TMPDIR="${SCRIPT_DIR}/tmp"
-
-SHARED_MEMORY_PATH="/dev/shm"
-
-function ssh_do() {
-    echo
-    echo "### "  ssh $@
-    ssh ${SSH_OPTIONS} $@
-}
-
-rm -f ${VIRL_PKEY}
-cat > ${VIRL_PKEY} <<EOF
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6
-GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX
-VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9
-asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz
-L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J
-73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76
-gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb
-4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN
-e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV
-SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J
-kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI
-ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa
-MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY
-RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa
-YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0
-2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab
-UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV
-IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I
-wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS
-NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM
-xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj
-yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS
-U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ
-cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh
-maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E=
------END RSA PRIVATE KEY-----
-EOF
-chmod 600 ${VIRL_PKEY}
-
-#
-# Pick a random host from the array of VIRL servers for every test set run
-# and attempt to reach it and verify it's status.
-#
-# The server must be reachable and have a "status" file with
-# the content "PRODUCTION" to be selected.
-#
-# If the server is not reachable or does not have the correct
-# status remove it from the array and start again.
-#
-# Abort if there are no more servers left in the array.
-#
-for index in "${!TEST_GROUPS[@]}"; do
-    VIRL_SERVER[${index}]=""
-    while [[ ! "${VIRL_SERVER[${index}]}" ]]; do
-        num_hosts=${#VIRL_SERVERS[@]}
-        if [ $num_hosts == 0 ]
-        then
-            echo "No more VIRL candidate hosts available, failing."
-            exit 127
-        fi
-        element=$[ $RANDOM % $num_hosts ]
-        virl_server_candidate=${VIRL_SERVERS[$element]}
-        virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
-        echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
-        if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
-        then
-            # Candidate is in good status. Select this server.
-            VIRL_SERVER[${index}]="$virl_server_candidate"
-        else
-            # Candidate is in bad status. Remove from array.
-            VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
-        fi
-    done
-done
-
-echo "Selected VIRL servers: ${VIRL_SERVER[@]}"
-
-# Temporarily download VPP packages from nexus.fd.io
-VPP_REPO_URL=$(cat ${SCRIPT_DIR}/VPP_REPO_URL_CENTOS)
-VPP_CLASSIFIER=""
-if [ "${#}" -ne "0" ]; then
-    arr=(${@})
-    echo ${arr[0]}
-    SKIP_PATCH="skip_patchORskip_vpp_patch"
-else
-    rm -f *.rpm
-    VPP_STABLE_VER=$(cat ${SCRIPT_DIR}/VPP_STABLE_VER_CENTOS)
-    wget -q "${VPP_REPO_URL}/vpp/${VPP_STABLE_VER}/vpp-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit
-    wget -q "${VPP_REPO_URL}/vpp-debuginfo/${VPP_STABLE_VER}/vpp-debuginfo-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit
-    wget -q "${VPP_REPO_URL}/vpp-devel/${VPP_STABLE_VER}/vpp-devel-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit
-    wget -q "${VPP_REPO_URL}/vpp-lib/${VPP_STABLE_VER}/vpp-lib-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit
-    wget -q "${VPP_REPO_URL}/vpp-plugins/${VPP_STABLE_VER}/vpp-plugins-${VPP_STABLE_VER}${VPP_CLASSIFIER}.rpm" || exit
-fi
-
-VPP_RPMS=(*.rpm)
-echo ${VPP_RPMS[@]}
-VIRL_DIR_LOC="/tmp"
-VPP_RPMS_FULL=(${VPP_RPMS[@]})
-
-# Prepend directory location at remote host to rpm list
-for index in "${!VPP_RPMS_FULL[@]}"; do
-    VPP_RPMS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_RPMS_FULL[${index}]}
-done
-
-echo "Updated file names: " ${VPP_RPMS_FULL[@]}
-
-cat ${VIRL_PKEY}
-
-# Copy the files to VIRL hosts
-DONE=""
-for index in "${!VIRL_SERVER[@]}"; do
-    # Do not copy files in case they have already been copied to the VIRL host
-    [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1
-
-    if [ "${copy}" -eq "0" ]; then
-        echo "VPP rpms have already been copied to the VIRL host ${VIRL_SERVER[${index}]}"
-    else
-        scp ${SSH_OPTIONS} *.rpm \
-        ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/
-
-        result=$?
-        if [ "${result}" -ne "0" ]; then
-            echo "Failed to copy VPP rpms to VIRL host ${VIRL_SERVER[${index}]}"
-            echo ${result}
-            exit ${result}
-        else
-            echo "VPP rpms successfully copied to the VIRL host ${VIRL_SERVER[${index}]}"
-        fi
-        DONE+=(${VIRL_SERVER[${index}]})
-    fi
-done
-
-# Start a simulation on VIRL server
-
-function stop_virl_simulation {
-    for index in "${!VIRL_SERVER[@]}"; do
-        ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\
-            "stop-testcase ${VIRL_SID[${index}]}"
-    done
-}
-
-# Upon script exit, cleanup the simulation execution
-trap stop_virl_simulation EXIT
-
-for index in "${!VIRL_SERVER[@]}"; do
-    echo "Starting simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}"
-    VIRL_SID[${index}]=$(ssh ${SSH_OPTIONS} \
-        ${VIRL_USERNAME}@${VIRL_SERVER[${index}]} \
-        "start-testcase -vv --copy ${VIRL_TOPOLOGY} \
-        --release ${VIRL_RELEASE} ${VPP_RPMS_FULL[@]}")
-    retval=$?
-    if [ ${retval} -ne "0" ]; then
-        echo "VIRL simulation start failed on ${VIRL_SERVER[${index}]}"
-        exit ${retval}
-    fi
-    if [[ ! "${VIRL_SID[${index}]}" =~ session-[a-zA-Z0-9_]{6} ]]; then
-        echo "No VIRL session ID reported."
-        exit 127
-    fi
-    echo "VIRL simulation started on ${VIRL_SERVER[${index}]}"
-
-    ssh_do ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\
-     cat /scratch/${VIRL_SID[${index}]}/topology.yaml
-
-    # Download the topology file from VIRL session and rename it
-    scp ${SSH_OPTIONS} \
-        ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:/scratch/${VIRL_SID[${index}]}/topology.yaml \
-        topologies/enabled/topology${index}.yaml
-
-    retval=$?
-    if [ ${retval} -ne "0" ]; then
-        echo "Failed to copy topology file from VIRL simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}"
-        exit ${retval}
-    fi
-done
-
-echo ${VIRL_SID[@]}
-
-virtualenv --system-site-packages env
-. env/bin/activate
-
-echo pip install
-pip install -r ${SCRIPT_DIR}/requirements.txt
-
-for index in "${!VIRL_SERVER[@]}"; do
-    pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \
-              -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \
-              -d ${SCRIPT_DIR}/topologies/enabled/topology${index}.yaml \
-              -vvv
-    if [ "$?" -ne "0" ]; then
-        echo "Topology${index} schema validation failed."
-        echo "However, the tests will start."
-    fi
-done
-
-function run_test_set() {
-    set +x
-    OLDIFS=$IFS
-    IFS=","
-    nr=$(echo $1)
-    rm -f ${LOG_PATH}/test_run${nr}.log
-    exec &> >(while read line; do echo "$(date +'%H:%M:%S') $line" \
-     >> ${LOG_PATH}/test_run${nr}.log; done;)
-    suite_str=""
-    for suite in ${TEST_GROUPS[${nr}]}; do
-        suite_str="${suite_str} --suite ${SUITE_PATH}.${suite}"
-    done
-    IFS=$OLDIFS
-
-    echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\
-        -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \
-        ${suite_str} \
-        --include vm_envAND3_node_single_link_topo \
-        --include vm_envAND3_node_double_link_topo \
-        --exclude PERFTEST \
-        --exclude ${SKIP_PATCH} \
-        --noncritical EXPECTED_FAILING \
-        --output ${LOG_PATH}/log_test_set_run${nr} \
-        tests/"
-
-    PYTHONPATH=`pwd` pybot -L TRACE -W 136\
-        -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \
-        ${suite_str} \
-        --include vm_envAND3_node_single_link_topo \
-        --include vm_envAND3_node_double_link_topo \
-        --exclude PERFTEST \
-        --exclude ${SKIP_PATCH} \
-        --noncritical EXPECTED_FAILING \
-        --output ${LOG_PATH}/log_test_set_run${nr} \
-        tests/
-
-    local_run_rc=$?
-    echo ${local_run_rc} > ${SHARED_MEMORY_PATH}/rc_test_run${nr}
-    set -x
-}
-
-set +x
-# Send to background an instance of the run_test_set() function for each number,
-# record the pid.
-for index in "${!VIRL_SERVER[@]}"; do
-    run_test_set ${index} &
-    pid=$!
-    echo "Sent to background: Test_set${index} (pid=$pid)"
-    pids[$pid]=$index
-done
-
-echo
-echo -n "Waiting..."
-
-# Watch the stable of background processes.
-# If a pid goes away, remove it from the array.
-while [ -n "${pids[*]}" ]; do
-    for i in $(seq 0 9); do
-        sleep 1
-        echo -n "."
-    done
-    for pid in "${!pids[@]}"; do
-        if ! ps "$pid" >/dev/null; then
-            echo -e "\n"
-            echo "Test_set${pids[$pid]} with PID $pid finished."
-            unset pids[$pid]
-        fi
-    done
-    if [ -z "${!pids[*]}" ]; then
-        break
-    fi
-    echo -n -e "\nStill waiting for test set(s): ${pids[*]} ..."
-done
-
-echo
-echo "All test set runs finished."
-echo
-
-set -x
-
-RC=0
-for index in "${!VIRL_SERVER[@]}"; do
-    echo "Test_set${index} log:"
-    cat ${LOG_PATH}/test_run${index}.log
-    RC_PARTIAL_RUN=$(cat ${SHARED_MEMORY_PATH}/rc_test_run${index})
-    RC=$((RC+RC_PARTIAL_RUN))
-    rm -f ${SHARED_MEMORY_PATH}/rc_test_run${index}
-    rm -f ${LOG_PATH}/test_run${index}.log
-    echo
-done
-
-# Log the final result
-if [ "${RC}" -eq "0" ]; then
-    set +x
-    echo
-    echo "========================================================================================================================================"
-    echo "Final result of all test loops:                                                                                                 | PASS |"
-    echo "All critical tests have passed."
-    echo "========================================================================================================================================"
-    echo
-    set -x
-else
-    if [ "${RC}" -eq "1" ]; then
-        HLP_STR="test has"
-    else
-        HLP_STR="tests have"
-    fi
-    set +x
-    echo
-    echo "========================================================================================================================================"
-    echo "Final result of all test loops:                                                                                                 | FAIL |"
-    echo "${RC} critical ${HLP_STR} failed."
-    echo "========================================================================================================================================"
-    echo
-    set -x
-fi
-
-echo Post-processing test data...
-
-partial_logs=""
-for index in "${!VIRL_SERVER[@]}"; do
-    partial_logs="${partial_logs} ${LOG_PATH}/log_test_set_run${index}.xml"
-done
-
-# Rebot output post-processing
-rebot --noncritical EXPECTED_FAILING \
-      --output output.xml ${partial_logs}
-
-# Remove unnecessary log files
-rm -f ${partial_logs}
-
-echo Post-processing finished.
-
-if [ ${RC} -eq 0 ]; then
-    RETURN_STATUS=0
-else
-    RETURN_STATUS=1
-fi
-
-exit ${RETURN_STATUS}