diff options
Diffstat (limited to 'bootstrap-ubuntu.sh')
| -rwxr-xr-x | bootstrap-ubuntu.sh | 390 |
1 files changed, 0 insertions, 390 deletions
diff --git a/bootstrap-ubuntu.sh b/bootstrap-ubuntu.sh deleted file mode 100755 index e99a6088d4..0000000000 --- a/bootstrap-ubuntu.sh +++ /dev/null @@ -1,390 +0,0 @@ -#!/bin/bash -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -x - -cat /etc/hostname -cat /etc/hosts - -export DEBIAN_FRONTEND=noninteractive -sudo apt-get -y update -sudo apt-get -y install libpython2.7-dev python-virtualenv - -VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") - -VIRL_USERNAME=jenkins-in -VIRL_PKEY=priv_key -VIRL_SERVER_STATUS_FILE="status" -VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" - -SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" - -VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_UBUNTU) -VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_UBUNTU) - -SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" - -TEST_GROUPS=("gre,ipv6,lisp,policer,rpf,softwire" "dhcp,ipsec,l2bd,l2xc,telemetry,vrf,vxlan" "cop,fds,honeycomb,iacl,ipv4,tap,vhost,vlan") -SUITE_PATH="tests.func" -SKIP_PATCH="SKIP_PATCH" - -# Create tmp dir -mkdir ${SCRIPT_DIR}/tmp - -# Use tmp dir to store log files -LOG_PATH="${SCRIPT_DIR}/tmp" - -# Use tmp dir for tarballs -export TMPDIR="${SCRIPT_DIR}/tmp" - -SHARED_MEMORY_PATH="/run/shm" - -function ssh_do() { - echo - echo "### " ssh $@ - ssh ${SSH_OPTIONS} $@ -} - -rm -f ${VIRL_PKEY} -cat > ${VIRL_PKEY} <<EOF ------BEGIN RSA PRIVATE KEY----- -MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6 -GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX -VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9 -asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz -L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J -73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76 -gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb -4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN -e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV -SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J -kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI -ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa -MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY -RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa -YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0 -2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab -UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV -IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I -wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS -NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM -xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj -yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS -U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ -cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh -maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E= ------END RSA PRIVATE KEY----- -EOF -chmod 600 ${VIRL_PKEY} - -# -# Pick a random host from the array of VIRL servers for every test set run -# and attempt to reach it and verify it's status. -# -# The server must be reachable and have a "status" file with -# the content "PRODUCTION" to be selected. -# -# If the server is not reachable or does not have the correct -# status remove it from the array and start again. -# -# Abort if there are no more servers left in the array. -# -for index in "${!TEST_GROUPS[@]}"; do - VIRL_SERVER[${index}]="" - while [[ ! "${VIRL_SERVER[${index}]}" ]]; do - num_hosts=${#VIRL_SERVERS[@]} - if [ $num_hosts == 0 ] - then - echo "No more VIRL candidate hosts available, failing." - exit 127 - fi - element=$[ $RANDOM % $num_hosts ] - virl_server_candidate=${VIRL_SERVERS[$element]} - virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1) - echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\" - if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] - then - # Candidate is in good status. Select this server. - VIRL_SERVER[${index}]="$virl_server_candidate" - else - # Candidate is in bad status. Remove from array. - VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}") - fi - done -done - -echo "Selected VIRL servers: ${VIRL_SERVER[@]}" - -# Temporarily download VPP and DPDK packages from nexus.fd.io -DPDK_STABLE_VER=$(cat ${SCRIPT_DIR}/DPDK_STABLE_VER)_amd64 -VPP_REPO_URL=$(cat ${SCRIPT_DIR}/VPP_REPO_URL_UBUNTU) -VPP_CLASSIFIER="-deb" -if [ "${#}" -ne "0" ]; then - arr=(${@}) - echo ${arr[0]} - SKIP_PATCH="skip_patchORskip_vpp_patch" - # Download DPDK parts not included in dpdk plugin of vpp build - wget -q "${VPP_REPO_URL}/vpp-dpdk-dkms/${DPDK_STABLE_VER}/vpp-dpdk-dkms-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit -else - rm -f *.deb - VPP_STABLE_VER=$(cat ${SCRIPT_DIR}/VPP_STABLE_VER_UBUNTU) - wget -q "${VPP_REPO_URL}/vpp/${VPP_STABLE_VER}/vpp-${VPP_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit - wget -q "${VPP_REPO_URL}/vpp-dbg/${VPP_STABLE_VER}/vpp-dbg-${VPP_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit - wget -q "${VPP_REPO_URL}/vpp-dev/${VPP_STABLE_VER}/vpp-dev-${VPP_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit - wget -q "${VPP_REPO_URL}/vpp-dpdk-dkms/${DPDK_STABLE_VER}/vpp-dpdk-dkms-${DPDK_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit - wget -q "${VPP_REPO_URL}/vpp-lib/${VPP_STABLE_VER}/vpp-lib-${VPP_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit - wget -q "${VPP_REPO_URL}/vpp-plugins/${VPP_STABLE_VER}/vpp-plugins-${VPP_STABLE_VER}${VPP_CLASSIFIER}.deb" || exit -fi - -VPP_DEBS=(*.deb) -echo ${VPP_DEBS[@]} -VIRL_DIR_LOC="/tmp" -VPP_DEBS_FULL=(${VPP_DEBS[@]}) - -# Prepend directory location at remote host to deb file list -for index in "${!VPP_DEBS_FULL[@]}"; do - VPP_DEBS_FULL[${index}]=${VIRL_DIR_LOC}/${VPP_DEBS_FULL[${index}]} -done - -echo "Updated file names: " ${VPP_DEBS_FULL[@]} - -cat ${VIRL_PKEY} - -# Copy the files to VIRL hosts -DONE="" -for index in "${!VIRL_SERVER[@]}"; do - # Do not copy files in case they have already been copied to the VIRL host - [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1 - - if [ "${copy}" -eq "0" ]; then - echo "VPP deb files have already been copied to the VIRL host ${VIRL_SERVER[${index}]}" - else - scp ${SSH_OPTIONS} *.deb \ - ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC}/ - - result=$? - if [ "${result}" -ne "0" ]; then - echo "Failed to copy VPP deb files to VIRL host ${VIRL_SERVER[${index}]}" - echo ${result} - exit ${result} - else - echo "VPP deb files successfully copied to the VIRL host ${VIRL_SERVER[${index}]}" - fi - DONE+=(${VIRL_SERVER[${index}]}) - fi -done - -# Start a simulation on VIRL server - -function stop_virl_simulation { - for index in "${!VIRL_SERVER[@]}"; do - ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ - "stop-testcase ${VIRL_SID[${index}]}" - done -} - -# Upon script exit, cleanup the simulation execution -trap stop_virl_simulation EXIT - -for index in "${!VIRL_SERVER[@]}"; do - echo "Starting simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" - VIRL_SID[${index}]=$(ssh ${SSH_OPTIONS} \ - ${VIRL_USERNAME}@${VIRL_SERVER[${index}]} \ - "start-testcase -vv --copy ${VIRL_TOPOLOGY} \ - --release ${VIRL_RELEASE} ${VPP_DEBS_FULL[@]}") - retval=$? - if [ ${retval} -ne "0" ]; then - echo "VIRL simulation start failed on ${VIRL_SERVER[${index}]}" - exit ${retval} - fi - if [[ ! "${VIRL_SID[${index}]}" =~ session-[a-zA-Z0-9_]{6} ]]; then - echo "No VIRL session ID reported." - exit 127 - fi - echo "VIRL simulation started on ${VIRL_SERVER[${index}]}" - - ssh_do ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ - cat /scratch/${VIRL_SID[${index}]}/topology.yaml - - # Download the topology file from VIRL session and rename it - scp ${SSH_OPTIONS} \ - ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:/scratch/${VIRL_SID[${index}]}/topology.yaml \ - topologies/enabled/topology${index}.yaml - - retval=$? - if [ ${retval} -ne "0" ]; then - echo "Failed to copy topology file from VIRL simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" - exit ${retval} - fi -done - -echo ${VIRL_SID[@]} - -virtualenv --system-site-packages env -. env/bin/activate - -echo pip install -pip install -r ${SCRIPT_DIR}/requirements.txt - -for index in "${!VIRL_SERVER[@]}"; do - pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \ - -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \ - -d ${SCRIPT_DIR}/topologies/enabled/topology${index}.yaml \ - -vvv - if [ "$?" -ne "0" ]; then - echo "Topology${index} schema validation failed." - echo "However, the tests will start." - fi -done - -function run_test_set() { - set +x - OLDIFS=$IFS - IFS="," - nr=$(echo $1) - rm -f ${LOG_PATH}/test_run${nr}.log - exec &> >(while read line; do echo "$(date +'%H:%M:%S') $line" \ - >> ${LOG_PATH}/test_run${nr}.log; done;) - suite_str="" - for suite in ${TEST_GROUPS[${nr}]}; do - suite_str="${suite_str} --suite ${SUITE_PATH}.${suite}" - done - IFS=$OLDIFS - - echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ - ${suite_str} \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude ${SKIP_PATCH} \ - --noncritical EXPECTED_FAILING \ - --output ${LOG_PATH}/log_test_set_run${nr} \ - tests/" - - PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ - ${suite_str} \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude ${SKIP_PATCH} \ - --noncritical EXPECTED_FAILING \ - --output ${LOG_PATH}/log_test_set_run${nr} \ - tests/ - - local_run_rc=$? - echo ${local_run_rc} > ${SHARED_MEMORY_PATH}/rc_test_run${nr} - set -x -} - -set +x -# Send to background an instance of the run_test_set() function for each number, -# record the pid. -for index in "${!VIRL_SERVER[@]}"; do - run_test_set ${index} & - pid=$! - echo "Sent to background: Test_set${index} (pid=$pid)" - pids[$pid]=$index -done - -echo -echo -n "Waiting..." - -# Watch the stable of background processes. -# If a pid goes away, remove it from the array. -while [ -n "${pids[*]}" ]; do - for i in $(seq 0 9); do - sleep 1 - echo -n "." - done - for pid in "${!pids[@]}"; do - if ! ps "$pid" >/dev/null; then - echo -e "\n" - echo "Test_set${pids[$pid]} with PID $pid finished." - unset pids[$pid] - fi - done - if [ -z "${!pids[*]}" ]; then - break - fi - echo -n -e "\nStill waiting for test set(s): ${pids[*]} ..." -done - -echo -echo "All test set runs finished." -echo - -set -x - -RC=0 -for index in "${!VIRL_SERVER[@]}"; do - echo "Test_set${index} log:" - cat ${LOG_PATH}/test_run${index}.log - RC_PARTIAL_RUN=$(cat ${SHARED_MEMORY_PATH}/rc_test_run${index}) - RC=$((RC+RC_PARTIAL_RUN)) - rm -f ${SHARED_MEMORY_PATH}/rc_test_run${index} - rm -f ${LOG_PATH}/test_run${index}.log - echo -done - -# Log the final result -if [ "${RC}" -eq "0" ]; then - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all test loops: | PASS |" - echo "All critical tests have passed." - echo "========================================================================================================================================" - echo - set -x -else - if [ "${RC}" -eq "1" ]; then - HLP_STR="test has" - else - HLP_STR="tests have" - fi - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all test loops: | FAIL |" - echo "${RC} critical ${HLP_STR} failed." - echo "========================================================================================================================================" - echo - set -x -fi - -echo Post-processing test data... - -partial_logs="" -for index in "${!VIRL_SERVER[@]}"; do - partial_logs="${partial_logs} ${LOG_PATH}/log_test_set_run${index}.xml" -done - -# Rebot output post-processing -rebot --noncritical EXPECTED_FAILING \ - --output output.xml ${partial_logs} - -# Remove unnecessary log files -rm -f ${partial_logs} - -echo Post-processing finished. - -if [ ${RC} -eq 0 ]; then - RETURN_STATUS=0 -else - RETURN_STATUS=1 -fi - -exit ${RETURN_STATUS} |