diff options
Diffstat (limited to 'bootstrap-vpp-verify-nightly.sh')
| -rw-r--r-- | bootstrap-vpp-verify-nightly.sh | 408 |
1 files changed, 0 insertions, 408 deletions
diff --git a/bootstrap-vpp-verify-nightly.sh b/bootstrap-vpp-verify-nightly.sh deleted file mode 100644 index 927eca83f0..0000000000 --- a/bootstrap-vpp-verify-nightly.sh +++ /dev/null @@ -1,408 +0,0 @@ -#!/bin/bash -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a ght (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not usecopy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -x - -cat /etc/hostname -cat /etc/hosts - -ARCHIVE_ARTIFACTS=(log.html output.xml report.html) - -SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" -export PYTHONPATH=${SCRIPT_DIR} - -# Create tmp dir -mkdir ${SCRIPT_DIR}/tmp - -# Use tmp dir for tarballs -export TMPDIR="${SCRIPT_DIR}/tmp" - -# Use tmp dir to store log files -LOG_PATH="$TMPDIR" - -if [ -f "/etc/redhat-release" ]; then - DISTRO="CENTOS" - sudo yum install -y python-devel python-virtualenv openssh-clients sshpass - PACKAGE=rpm -else - DISTRO="UBUNTU" - export DEBIAN_FRONTEND=noninteractive - sudo apt-get -y update - sudo apt-get -y install libpython2.7-dev python-virtualenv - PACKAGE=deb -fi - -# 1st step: Download and prepare VPP packages - -# Temporarily download VPP packages from nexus.fd.io -if [ "${#}" -ne "0" ]; then - arr=(${@}) - echo ${arr[0]} -else - # Download the latest VPP build install packages - rm -f *.${PACKAGE} - echo Downloading VPP packages... - CSIT_DIR=${SCRIPT_DIR} - source "${SCRIPT_DIR}/resources/libraries/bash/function/artifacts.sh" - download_artifacts - # Need to revert -euo as the rest of script is not optimized for this. - set +euo pipefail -fi - -# Take vpp package and get the vpp version -VPP_PKGS=(*.$PACKAGE) -case "$DISTRO" in - CENTOS ) - VPP_VER="$( expr match $(ls *.rpm | head -n 1) 'vpp-\(.*\).rpm' )" - ;; - UBUNTU ) - VPP_VER="$( expr match $(ls *.deb | head -n 1) 'vpp-\(.*\)-deb.deb' )" -esac - -echo ${VPP_PKGS[@]} - -set +x -echo "****************************************************************************************************************************************" -echo "1st step: Download VPP packages FINISHED" -echo "VPP version to be tested: ${VPP_VER}" -echo "****************************************************************************************************************************************" -set -x - - -# 2nd step: Start virtual env and install requirements - -echo Starting virtual env... -virtualenv --system-site-packages env -. env/bin/activate - -echo Installing requirements... -pip install -r ${SCRIPT_DIR}/requirements.txt - -set +x -echo "****************************************************************************************************************************************" -echo "2nd step: Start virtual env and install requirements FINISHED" -echo "****************************************************************************************************************************************" -set -x - - -# 3rd step: Prepare VIRL system -echo Preparing VIRL system... - -VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") -IPS_PER_VIRL=( "10.30.51.28:252" - "10.30.51.29:74" - "10.30.51.30:74" ) -SIMS_PER_VIRL=( "10.30.51.28:13" - "10.30.51.29:13" - "10.30.51.30:13" ) -IPS_PER_SIMULATION=5 - -function get_max_ip_nr() { - virl_server=$1 - IP_VALUE="0" - for item in "${IPS_PER_VIRL[@]}" ; do - if [ "${item%%:*}" == "${virl_server}" ] - then - IP_VALUE=${item#*:} - break - fi - done - echo "$IP_VALUE" -} - -function get_max_sim_nr() { - virl_server=$1 - SIM_VALUE="0" - for item in "${SIMS_PER_VIRL[@]}" ; do - if [ "${item%%:*}" == "${virl_server}" ] - then - SIM_VALUE=${item#*:} - break - fi - done - echo "$SIM_VALUE" -} - -VIRL_USERNAME=jenkins-in -VIRL_PKEY=priv_key -VIRL_SERVER_STATUS_FILE="status" -VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" - -SKIP_PATCH="skip_patchORskip_vpp_patch" - -case "$DISTRO" in - CENTOS ) - VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_CENTOS) - VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_CENTOS) - NON_CRITICAL_TESTS="expected_failingORvm" - ;; - UBUNTU ) - VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_UBUNTU) - VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_UBUNTU) - NON_CRITICAL_TESTS="EXPECTED_FAILING" - ;; -esac - -SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" - -function ssh_do() { - echo - echo "### " ssh $@ - ssh ${SSH_OPTIONS} $@ -} - -rm -f ${VIRL_PKEY} -cat > ${VIRL_PKEY} <<EOF ------BEGIN RSA PRIVATE KEY----- -MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6 -GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX -VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9 -asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz -L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J -73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76 -gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb -4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN -e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV -SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J -kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI -ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa -MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY -RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa -YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0 -2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab -UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV -IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I -wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS -NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM -xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj -yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS -U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ -cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh -maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E= ------END RSA PRIVATE KEY----- -EOF -chmod 600 ${VIRL_PKEY} - -# -# The server must be reachable and have a "status" file with -# the content "PRODUCTION" to be selected. -# -# If the server is not reachable or does not have the correct -# status remove it from the array and start again. -# -# Abort if there are no more servers left in the array. -# -VIRL_PROD_SERVERS=() -for index in "${!VIRL_SERVERS[@]}"; do - virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} cat $VIRL_SERVER_STATUS_FILE 2>&1) - echo VIRL HOST ${VIRL_SERVERS[$index]} status is \"$virl_server_status\" - if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] - then - # Candidate is in good status. Add to array. - VIRL_PROD_SERVERS+=(${VIRL_SERVERS[$index]}) - fi -done - -VIRL_SERVERS=("${VIRL_PROD_SERVERS[@]}") -echo "VIRL servers in production: ${VIRL_SERVERS[@]}" -num_hosts=${#VIRL_SERVERS[@]} -if [ $num_hosts == 0 ] -then - echo "No more VIRL candidate hosts available, failing." - exit 127 -fi - -# Get the LOAD of each server based on number of active simulations (test cases) -VIRL_SERVER_LOAD=() -for index in "${!VIRL_SERVERS[@]}"; do - VIRL_SERVER_LOAD[${index}]=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} "list-testcases | grep session | wc -l") -done - -# Pick the least loaded server -VIRL_SERVER="" -least_load_server_idx=$(echo "${VIRL_SERVER_LOAD[*]}" | tr -s ' ' '\n' | awk '{print($0" "NR)}' | sort -g -k1,1 | head -1 | cut -f2 -d' ') -least_load_server=${VIRL_SERVERS[$least_load_server_idx-1]} -VIRL_SERVER=($least_load_server) - -echo "Selected VIRL servers: ${VIRL_SERVER[@]}" - -VIRL_DIR_LOC="/tmp" -VPP_PKGS_VIRL=(${VPP_PKGS[@]}) - -# Prepend directory location at remote host to package file list -for index in "${!VPP_PKGS_VIRL[@]}"; do - VPP_PKGS_VIRL[${index}]=${VIRL_DIR_LOC}/${VPP_PKGS_VIRL[${index}]} -done - -echo "Updated file names: " ${VPP_PKGS_VIRL[@]} - -cat ${VIRL_PKEY} -# Copy the files to VIRL host -scp ${SSH_OPTIONS} *.${PACKAGE} \ - ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/ - -result=$? -if [ "${result}" -ne "0" ]; then - echo "Failed to copy vpp package files to virl host" - echo ${result} - exit ${result} -fi - -function stop_virl_simulation { - ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\ - "stop-testcase ${VIRL_SID}" -} - -# Upon script exit, cleanup the VIRL simulation execution -trap stop_virl_simulation EXIT - -# Start a simulation on VIRL server -echo "Starting simulation on VIRL server" - -# Get given VIRL server limits for max. number of VMs and IPs -max_ips=$(get_max_ip_nr ${VIRL_SERVER}) -max_ips_from_sims=$(($(get_max_sim_nr ${VIRL_SERVER[${index}]})*IPS_PER_SIMULATION)) -# Set quota to lower value -IP_QUOTA=$([ $max_ips -le $max_ips_from_sims ] && echo "$max_ips" || echo "$max_ips_from_sims") - -# Start the simulation -VIRL_SID=$(ssh ${SSH_OPTIONS} \ - ${VIRL_USERNAME}@${VIRL_SERVER} \ - "start-testcase -vv --quota ${IP_QUOTA} --copy ${VIRL_TOPOLOGY} \ - --release ${VIRL_RELEASE} ${VPP_PKGS_VIRL[@]}") -retval=$? -if [ ${retval} -ne "0" ]; then - echo "VIRL simulation start failed on ${VIRL_SERVER}" - exit ${retval} -fi - -if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then - echo "No VIRL session ID reported." - exit 127 -fi - -echo ${VIRL_SID} - -ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml - -# Download the topology file from VIRL session -scp ${SSH_OPTIONS} \ - ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \ - topologies/enabled/topology_VIRL.yaml - -retval=$? -if [ ${retval} -ne "0" ]; then - echo "Failed to copy topology file from VIRL simulation" - exit ${retval} -fi - -set +x -echo "****************************************************************************************************************************************" -echo "3rd step: Start the simulation on the VIRL server FINISHED" -echo "****************************************************************************************************************************************" -set -x - - -# 4th step: Run functional test suites - -pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \ - -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \ - -d ${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \ - -vvv -if [ "$?" -ne "0" ]; then - echo "Topology schema validation failed." - echo "However, the tests will start." -fi - -echo Running functional tests on the VIRL system... - -echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \ - --suite "tests.func" \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude ${SKIP_PATCH} \ - --noncritical ${NON_CRITICAL_TESTS} \ - --outputdir ${LOG_PATH} \ - tests/" - -PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \ - --suite "tests.func" \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude ${SKIP_PATCH} \ - --noncritical ${NON_CRITICAL_TESTS} \ - --outputdir ${LOG_PATH} \ - tests/ -RC=$(echo $?) - -set +x -echo "****************************************************************************************************************************************" -echo "4th step: Run functional tests FINISHED" -echo "****************************************************************************************************************************************" -set -x - -# Log the final result -if [ ${RC} -eq 0 ]; then - RETURN_STATUS=0 - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all tests: | PASS |" - echo "All critical tests have passed." - echo "========================================================================================================================================" - echo - set -x -elif [ ${MORE_FAILS} -eq 0 ]; then - RETURN_STATUS=1 - if [ ${RC} -eq 1 ]; then - HLP_STR="test has" - else - HLP_STR="tests have" - fi - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all tests: | FAIL |" - echo "${RC} critical ${HLP_STR} failed." - echo "========================================================================================================================================" - echo - set -x -else - RETURN_STATUS=1 - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all tests: | FAIL |" - echo "More then 250 critical tests have failed in one test loop." - echo "========================================================================================================================================" - echo - set -x -fi - - -# 5th step: Archive artifacts -mkdir archive -for i in ${ARCHIVE_ARTIFACTS[@]}; do - cp $( readlink -f ${LOG_PATH}/${i} | tr '\n' ' ' ) archive/ -done - -echo Log files copied to archive directory. - -exit ${RETURN_STATUS} |