diff options
Diffstat (limited to 'bootstrap-vpp-verify-semiweekly.sh')
| -rw-r--r-- | bootstrap-vpp-verify-semiweekly.sh | 429 |
1 files changed, 429 insertions, 0 deletions
diff --git a/bootstrap-vpp-verify-semiweekly.sh b/bootstrap-vpp-verify-semiweekly.sh new file mode 100644 index 0000000000..c62d1ddd50 --- /dev/null +++ b/bootstrap-vpp-verify-semiweekly.sh @@ -0,0 +1,429 @@ +#!/bin/bash +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a ght (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not usecopy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +set -x + +RETURN_STATUS=0 + +cat /etc/hostname +cat /etc/hosts + +export DEBIAN_FRONTEND=noninteractive +sudo apt-get -y update +sudo apt-get -y install libpython2.7-dev python-virtualenv + +PYBOT_ARGS="--noncritical MULTI_THREAD" + +ARCHIVE_ARTIFACTS=(log.html output.xml report.html output_perf_data.json) + +SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" +export PYTHONPATH=${SCRIPT_DIR} + + +# 1st step: Download and prepare VPP packages + +# Temporarily download VPP packages from nexus.fd.io +rm -f *.deb +if [ "${#}" -ne "0" ]; then + arr=(${@}) + echo ${arr[0]} +else + # Download the latest VPP build .deb install packages + echo Downloading VPP packages... + bash ${SCRIPT_DIR}/resources/tools/download_install_vpp_pkgs.sh --skip-install +fi + +VPP_DEBS=(*.deb) +echo ${VPP_DEBS[@]} + +VPP_VER=$(echo ${VPP_DEBS#vpp-}) +VPP_VER=$(echo ${VPP_VER%.deb}) +echo VPP version to be tested: ${VPP_VER} + +set +x +echo "******************************************************************************" +echo "1st step: Download VPP packages FINISHED" +echo "******************************************************************************" +set -x + + +# 2nd step: Start virtual env and install requirements + +echo Starting virtual env... +virtualenv --system-site-packages env +. env/bin/activate + +echo Installing requirements... +pip install -r ${SCRIPT_DIR}/requirements.txt + +set +x +echo "******************************************************************************" +echo "2nd step: Start virtual env and install requirements FINISHED" +echo "******************************************************************************" +set -x + + +# 3rd step: Prepare VIRL system +echo Preparing VIRL system... + +VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") +VIRL_SERVER="" + +VIRL_USERNAME=jenkins-in +VIRL_PKEY=priv_key +VIRL_SERVER_STATUS_FILE="status" +VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" + +SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" + +function ssh_do() { + echo + echo "### " ssh $@ + ssh ${SSH_OPTIONS} $@ +} + +rm -f ${VIRL_PKEY} +cat > ${VIRL_PKEY} <<EOF +-----BEGIN RSA PRIVATE KEY----- +MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6 +GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX +VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9 +asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz +L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J +73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76 +gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb +4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN +e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV +SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J +kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI +ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa +MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY +RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa +YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0 +2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab +UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV +IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I +wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS +NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM +xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj +yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS +U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ +cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh +maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E= +-----END RSA PRIVATE KEY----- +EOF +chmod 600 ${VIRL_PKEY} + +# +# Pick a random host from the array of VIRL servers, and attempt +# to reach it and verify it's status. +# +# The server must be reachable, and have a "status" file with +# the content "PRODUCTION", to be selected. +# +# If the server is not reachable, or does not have the correct +# status, remove it from the array and start again. +# +# Abort if there are no more servers left in the array. +# +while [[ ! "$VIRL_SERVER" ]] +do + num_hosts=${#VIRL_SERVERS[@]} + if [ $num_hosts == 0 ] + then + echo "No more VIRL candidate hosts available, failing." + exit 127 + fi + element=$[ $RANDOM % $num_hosts ] + virl_server_candidate=${VIRL_SERVERS[$element]} + virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1) + echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\" + if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] + then + # Candidate is in good status. Select this server. + VIRL_SERVER="$virl_server_candidate" + else + # Candidate is in bad status. Remove from array. + VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}") + fi +done + + +VIRL_DIR_LOC="/tmp" +VPP_DEBS_VIRL=(${VPP_DEBS[@]}) + +# Prepend directory location at remote host to deb file list +for index in "${!VPP_DEBS_VIRL[@]}"; do + VPP_DEBS_VIRL[${index}]=${VIRL_DIR_LOC}/${VPP_DEBS_VIRL[${index}]} +done + +echo "Updated file names: " ${VPP_DEBS_VIRL[@]} + +cat ${VIRL_PKEY} +# Copy the files to VIRL host +scp ${SSH_OPTIONS} *.deb \ + ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/ + +result=$? +if [ "${result}" -ne "0" ]; then + echo "Failed to copy vpp deb files to virl host" + echo ${result} + exit ${result} +fi + +# Start a simulation on VIRL server +echo "Starting simulation on VIRL server" + +function stop_virl_simulation { + ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\ + "stop-testcase ${VIRL_SID}" +} + +VIRL_SID=$(ssh ${SSH_OPTIONS} \ + ${VIRL_USERNAME}@${VIRL_SERVER} \ + "start-testcase -c double-ring-nested ${VPP_DEBS_VIRL[@]}") +retval=$? +if [ "$?" -ne "0" ]; then + echo "VIRL simulation start failed" + exit ${retval} +fi + +if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then + echo "No VIRL session ID reported." + exit 127 +fi + +# Upon script exit, cleanup the VIRL simulation execution +trap stop_virl_simulation EXIT +echo ${VIRL_SID} + +ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml + +# Download the topology file from VIRL session +scp ${SSH_OPTIONS} \ + ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \ + topologies/enabled/topology_VIRL.yaml + +retval=$? +if [ "$?" -ne "0" ]; then + echo "Failed to copy topology file from VIRL simulation" + exit ${retval} +fi + +set +x +echo "******************************************************************************" +echo "3rd step: Start the simulation on the VIRL server FINISHED" +echo "******************************************************************************" +set -x + + +# 4th step: Run functional test suites + +RC=0 +MORE_FAILS=0 + +echo Running functional tests on the VIRL system... + +# There are used three iterations of functional tests there +# to check the stability and reliability of the results. +for test_set in 1 2 3 +do + echo + echo Functional test loop: ${test_set} + echo + + pybot -L TRACE \ + -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology_VIRL.yaml \ + --include vm_envAND3_node_single_link_topo \ + --include vm_envAND3_node_double_link_topo \ + --exclude PERFTEST \ + --noncritical EXPECTED_FAILING \ + --output log_func_test_set${test_set} \ + tests/ + PARTIAL_RC=$(echo $?) + if [ ${PARTIAL_RC} -eq 250 ]; then + MORE_FAILS=1 + fi + RC=$((RC+PARTIAL_RC)) +done + +set +x +echo "******************************************************************************" +echo "4th step: Run functional tests FINISHED" +echo "******************************************************************************" +set -x + + +# 5th step: Reserve and prepare HW system + +echo Making a reservation for the HW system... + +# Space separated list of available testbeds, described by topology files +TOPOLOGIES="topologies/available/lf_testbed1-X710-X520.yaml \ + topologies/available/lf_testbed2-X710-X520.yaml \ + topologies/available/lf_testbed3-X710-X520.yaml" + +# Reservation dir +RESERVATION_DIR="/tmp/reservation_dir" +INSTALLATION_DIR="/tmp/install_dir" + +WORKING_TOPOLOGY="" + +# We iterate over available topologies and wait until we reserve topology +while :; do + for TOPOLOGY in ${TOPOLOGIES}; + do + python ${SCRIPT_DIR}/resources/tools/topo_reservation.py -t ${TOPOLOGY} + if [ $? -eq 0 ]; then + WORKING_TOPOLOGY=${TOPOLOGY} + echo "Reserved: ${WORKING_TOPOLOGY}" + break + fi + done + + if [ ! -z "${WORKING_TOPOLOGY}" ]; then + # Exit the infinite while loop if we made a reservation + break + fi + + # Wait ~3minutes before next try + SLEEP_TIME=$[ ( $RANDOM % 20 ) + 180 ]s + echo "Sleeping ${SLEEP_TIME}" + sleep ${SLEEP_TIME} +done + +function cancel_all { + python ${SCRIPT_DIR}/resources/tools/topo_installation.py -c -d ${INSTALLATION_DIR} -t $1 + python ${SCRIPT_DIR}/resources/tools/topo_reservation.py -c -t $1 +} + +# Upon script exit, cleanup the VIRL simulation execution +# and cancel the reservation and installation of HW system +# and delete all vpp packages. +trap "stop_virl_simulation; cancel_all ${WORKING_TOPOLOGY}" EXIT + +python ${SCRIPT_DIR}/resources/tools/topo_installation.py -t ${WORKING_TOPOLOGY} \ + -d ${INSTALLATION_DIR} \ + -p ${VPP_DEBS[@]} + +if [ $? -eq 0 ]; then + echo "VPP Installed on hosts from: ${WORKING_TOPOLOGY}" +else + echo "Failed to copy vpp deb files to DUTs" + exit 1 +fi + +set +x +echo "******************************************************************************" +echo "5th step: Making a reservation for HW system FINISHED" +echo "******************************************************************************" +set -x + +# 6th step: Run performance tests + +# Performance tests on HW system +echo Performance tests on HW system + +pybot ${PYBOT_ARGS} \ + -L TRACE \ + -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \ + --include perftest_long \ + --output log_perf_test_set \ + tests/ + +PARTIAL_RC=$(echo $?) +if [ ${PARTIAL_RC} -eq 250 ]; then + MORE_FAILS=1 +fi +RC=$((RC+PARTIAL_RC)) + +set +x +echo "******************************************************************************" +echo "6th step: Run performance tests FINISHED" +echo "******************************************************************************" +set -x + + +# Set RETURN_STATUS=1 if some critical test failed +if [ ! ${RC} -eq 0 ]; then + RETURN_STATUS=1 +fi + +# Log the final result +if [ ${RC} -eq 0 ]; then + set +x + echo + echo "==============================================================================" + echo "Final result of all test loops: | PASS |" + echo "All critical tests have passed." + echo "==============================================================================" + echo + set -x +elif [ ${MORE_FAILS} -eq 0 ]; then + if [ ${RC} -eq 1 ]; then + HLP_STR="test has" + else + HLP_STR="tests have" + fi + set +x + echo + echo "==============================================================================" + echo "Final result of all test loops: | FAIL |" + echo "${RC} critical ${HLP_STR} failed." + echo "==============================================================================" + echo + set -x +else + set +x + echo + echo "==============================================================================" + echo "Final result of all test loops: | FAIL |" + echo "More then 250 critical tests have failed in one test loop." + echo "==============================================================================" + echo + set -x +fi + + +# 7th step: Post-processing test data +echo Post-processing test data... + +# Getting JSON perf data output +python ${SCRIPT_DIR}/resources/tools/robot_output_parser.py \ + -i ${SCRIPT_DIR}/log_perf_test_set.xml \ + -o ${SCRIPT_DIR}/output_perf_data.json \ + -v ${VPP_VER} +if [ ! $? -eq 0 ]; then + echo "Parsing ${SCRIPT_DIR}/log_perf_test_set.xml failed" +fi + +# Rebot output post-processing +rebot --output output.xml ./log_func_test_set1.xml ./log_func_test_set2.xml \ + ./log_func_test_set3.xml ./log_perf_test_set.xml + +# Remove unnecessary files +rm -f ./log_test_set1.xml ./log_test_set2.xml ./log_test_set3.xml \ + ./log_perf_test_set.xml + +# Archive artifacts +mkdir archive +for i in ${ARCHIVE_ARTIFACTS[@]}; do + cp $( readlink -f ${i} | tr '\n' ' ' ) archive/ +done + +echo Post-processing finished. + +exit ${RETURN_STATUS} |