diff options
Diffstat (limited to 'bootstrap.sh')
| -rwxr-xr-x | bootstrap.sh | 451 |
1 files changed, 0 insertions, 451 deletions
diff --git a/bootstrap.sh b/bootstrap.sh deleted file mode 100755 index 91ddb97ab2..0000000000 --- a/bootstrap.sh +++ /dev/null @@ -1,451 +0,0 @@ -#!/bin/bash -# Copyright (c) 2018 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -set -x - -cat /etc/hostname -cat /etc/hosts - -SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" -export PYTHONPATH=${SCRIPT_DIR} - -OS_ID=$(grep '^ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g') -OS_VERSION_ID=$(grep '^VERSION_ID=' /etc/os-release | cut -f2- -d= | sed -e 's/\"//g') - -if [ "$OS_ID" == "centos" ]; then - DISTRO="CENTOS" - PACKAGE="rpm" - # TODO: Remove when corresponding part of CSIT-1546 is addressed. - sudo yum install -y python-devel python-virtualenv openssh-clients sshpass -elif [ "$OS_ID" == "ubuntu" ]; then - DISTRO="UBUNTU" - PACKAGE="deb" - # TODO: Remove when corresponding part of CSIT-1546 is addressed. - export DEBIAN_FRONTEND=noninteractive - sudo apt-get -y update - sudo apt-get -y install libpython2.7-dev python-virtualenv sshpass -else - echo "$OS_ID is not yet supported." - exit 1 -fi - -# Temporarily download VPP and DPDK packages from nexus.fd.io -if [ "${#}" -ne "0" ]; then - arr=(${@}) - echo ${arr[0]} - SKIP_PATCH="skip_patchORskip_vpp_patch" -else - VPP_VERSION=$(< ${SCRIPT_DIR}/VPP_STABLE_VER_${DISTRO}) - CSIT_DIR=${SCRIPT_DIR} - source "${SCRIPT_DIR}/resources/libraries/bash/function/artifacts.sh" - download_artifacts - # Need to revert -euo as the rest of script is not optimized for this. - set +euo pipefail -fi - -VIRL_DIR_LOC="/tmp/" -VPP_PKGS=(*vpp*.$PACKAGE) -VPP_PKGS_FULL=("${VPP_PKGS[@]/#/${VIRL_DIR_LOC}}") -echo ${VPP_PKGS[@]} - -VIRL_TOPOLOGY=$(cat ${SCRIPT_DIR}/VIRL_TOPOLOGY_${DISTRO}) -VIRL_RELEASE=$(cat ${SCRIPT_DIR}/VIRL_RELEASE_${DISTRO}) -VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30") -IPS_PER_VIRL=( "10.30.51.28:252" - "10.30.51.29:252" - "10.30.51.30:252" ) -SIMS_PER_VIRL=( "10.30.51.28:13" - "10.30.51.29:13" - "10.30.51.30:13" ) -IPS_PER_SIMULATION=5 - -function get_max_ip_nr() { - virl_server=$1 - IP_VALUE="0" - for item in "${IPS_PER_VIRL[@]}" ; do - if [ "${item%%:*}" == "${virl_server}" ] - then - IP_VALUE=${item#*:} - break - fi - done - echo "$IP_VALUE" -} - -function get_max_sim_nr() { - virl_server=$1 - SIM_VALUE="0" - for item in "${SIMS_PER_VIRL[@]}" ; do - if [ "${item%%:*}" == "${virl_server}" ] - then - SIM_VALUE=${item#*:} - break - fi - done - echo "$SIM_VALUE" -} - -VIRL_USERNAME=jenkins-in -VIRL_PKEY=priv_key -VIRL_SERVER_STATUS_FILE="status" -VIRL_SERVER_EXPECTED_STATUS="PRODUCTION" - -SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error" - -TEST_GROUPS=("ip4_tunnels,ip6_tunnels,l2xc") -SUITE_PATH="tests.vpp.func" -SKIP_PATCH="SKIP_PATCH" - -# Create tmp dir -mkdir ${SCRIPT_DIR}/tmp - -# Use tmp dir to store log files -LOG_PATH="${SCRIPT_DIR}/tmp" - -# Use tmp dir for tarballs -export TMPDIR="${SCRIPT_DIR}/tmp" - -function ssh_do() { - echo - echo "### " ssh $@ - ssh ${SSH_OPTIONS} $@ -} - -rm -f ${VIRL_PKEY} -cat > ${VIRL_PKEY} <<EOF ------BEGIN RSA PRIVATE KEY----- -MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6 -GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX -VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9 -asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz -L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J -73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76 -gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb -4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN -e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV -SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J -kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI -ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa -MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY -RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa -YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0 -2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab -UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV -IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I -wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS -NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM -xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj -yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS -U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ -cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh -maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E= ------END RSA PRIVATE KEY----- -EOF -chmod 600 ${VIRL_PKEY} - -# -# The server must be reachable and have a "status" file with -# the content "PRODUCTION" to be selected. -# -# If the server is not reachable or does not have the correct -# status remove it from the array and start again. -# -# Abort if there are no more servers left in the array. -# -VIRL_PROD_SERVERS=() -for index in "${!VIRL_SERVERS[@]}"; do - virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} cat $VIRL_SERVER_STATUS_FILE 2>&1) - echo VIRL HOST ${VIRL_SERVERS[$index]} status is \"$virl_server_status\" - if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ] - then - # Candidate is in good status. Add to array. - VIRL_PROD_SERVERS+=(${VIRL_SERVERS[$index]}) - fi -done - -VIRL_SERVERS=("${VIRL_PROD_SERVERS[@]}") -echo "VIRL servers in production: ${VIRL_SERVERS[@]}" -num_hosts=${#VIRL_SERVERS[@]} -if [ $num_hosts == 0 ] -then - echo "No more VIRL candidate hosts available, failing." - exit 127 -fi - -# Get the LOAD of each server based on number of active simulations (testcases) -VIRL_SERVER_LOAD=() -for index in "${!VIRL_SERVERS[@]}"; do - VIRL_SERVER_LOAD[${index}]=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVERS[$index]} "list-testcases | grep session | wc -l") -done - -# Pick for each TEST_GROUP least loaded server -VIRL_SERVER=() -for index in "${!TEST_GROUPS[@]}"; do - least_load_server_idx=$(echo "${VIRL_SERVER_LOAD[*]}" | tr -s ' ' '\n' | awk '{print($0" "NR)}' | sort -g -k1,1 | head -1 | cut -f2 -d' ') - least_load_server=${VIRL_SERVERS[$least_load_server_idx-1]} - VIRL_SERVER+=($least_load_server) - # Adjusting load as we are not going run simulation immediately - VIRL_SERVER_LOAD[$least_load_server_idx-1]=$((VIRL_SERVER_LOAD[$least_load_server_idx-1]+1)) -done - -echo "Selected VIRL servers: ${VIRL_SERVER[@]}" - -cat ${VIRL_PKEY} - -# Copy the files to VIRL hosts -DONE="" -for index in "${!VIRL_SERVER[@]}"; do - # Do not copy files in case they have already been copied to the VIRL host - [[ "${DONE[@]}" =~ "${VIRL_SERVER[${index}]}" ]] && copy=0 || copy=1 - - if [ "${copy}" -eq "0" ]; then - echo "VPP packages have already been copied to the VIRL host ${VIRL_SERVER[${index}]}" - else - scp ${SSH_OPTIONS} ${VPP_PKGS[@]} \ - ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:${VIRL_DIR_LOC} - - result=$? - if [ "${result}" -ne "0" ]; then - echo "Failed to copy VPP packages to VIRL host ${VIRL_SERVER[${index}]}" - echo ${result} - exit ${result} - else - echo "VPP packages successfully copied to the VIRL host ${VIRL_SERVER[${index}]}" - fi - DONE+=(${VIRL_SERVER[${index}]}) - fi -done - -# Start a simulation on VIRL server - -function stop_virl_simulation { - for index in "${!VIRL_SERVER[@]}"; do - ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ - "stop-testcase ${VIRL_SID[${index}]}" - done -} - -# Upon script exit, cleanup the simulation execution -trap stop_virl_simulation EXIT - -for index in "${!VIRL_SERVER[@]}"; do - echo "Starting simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" - # Get given VIRL server limits for max. number of VMs and IPs - max_ips=$(get_max_ip_nr ${VIRL_SERVER[${index}]}) - max_ips_from_sims=$(($(get_max_sim_nr ${VIRL_SERVER[${index}]})*IPS_PER_SIMULATION)) - # Set quota to lower value - IP_QUOTA=$([ $max_ips -le $max_ips_from_sims ] && echo "$max_ips" || echo "$max_ips_from_sims") - # Start the simulation - VIRL_SID[${index}]=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER[${index}]} \ - "start-testcase -vv \ - --quota ${IP_QUOTA} \ - --copy ${VIRL_TOPOLOGY} \ - --expiry 180 \ - --release ${VIRL_RELEASE} \ - ${VPP_PKGS_FULL[@]}") - # TODO: remove param ${VPP_PKGS_FULL[@]} when start-testcase script is - # updated on all virl servers - retval=$? - if [ ${retval} -ne "0" ]; then - echo "VIRL simulation start failed on ${VIRL_SERVER[${index}]}" - exit ${retval} - fi - if [[ ! "${VIRL_SID[${index}]}" =~ session-[a-zA-Z0-9_]{6} ]]; then - echo "No VIRL session ID reported." - exit 127 - fi - echo "VIRL simulation nr. ${index} started on ${VIRL_SERVER[${index}]}" - - ssh_do ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}\ - cat /scratch/${VIRL_SID[${index}]}/topology.yaml - - # Download the topology file from VIRL session and rename it - scp ${SSH_OPTIONS} \ - ${VIRL_USERNAME}@${VIRL_SERVER[${index}]}:/scratch/${VIRL_SID[${index}]}/topology.yaml \ - topologies/enabled/topology${index}.yaml - - retval=$? - if [ ${retval} -ne "0" ]; then - echo "Failed to copy topology file from VIRL simulation nr. ${index} on VIRL server ${VIRL_SERVER[${index}]}" - exit ${retval} - fi -done - -echo ${VIRL_SID[@]} - -virtualenv --system-site-packages env -. env/bin/activate - -echo pip install -pip install -r ${SCRIPT_DIR}/requirements.txt - -for index in "${!VIRL_SERVER[@]}"; do - pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \ - -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \ - -d ${SCRIPT_DIR}/topologies/enabled/topology${index}.yaml \ - -vvv - if [ "$?" -ne "0" ]; then - echo "Topology${index} schema validation failed." - echo "However, the tests will start." - fi -done - -function run_test_set() { - set +x - OLDIFS=$IFS - IFS="," - nr=$(echo $1) - rm -f ${LOG_PATH}/test_run${nr}.log - exec &> >(while read line; do echo "$(date +'%H:%M:%S') $line" \ - >> ${LOG_PATH}/test_run${nr}.log; done;) - suite_str="" - for suite in ${TEST_GROUPS[${nr}]}; do - suite_str="${suite_str} --suite ${SUITE_PATH}.${suite}" - done - IFS=$OLDIFS - - echo "PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ - ${suite_str} \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude SOFTWIRE \ - --exclude ${SKIP_PATCH} \ - --exclude SKIP_TEST \ - --noncritical EXPECTED_FAILING \ - --output ${LOG_PATH}/log_test_set_run${nr} \ - tests/" - - PYTHONPATH=`pwd` pybot -L TRACE -W 136\ - -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology${nr}.yaml \ - ${suite_str} \ - --include vm_envAND3_node_single_link_topo \ - --include vm_envAND3_node_double_link_topo \ - --exclude PERFTEST \ - --exclude SOFTWIRE \ - --exclude ${SKIP_PATCH} \ - --exclude SKIP_TEST \ - --noncritical EXPECTED_FAILING \ - --output ${LOG_PATH}/log_test_set_run${nr} \ - tests/ - - local local_run_rc=$? - set -x - echo ${local_run_rc} > ${LOG_PATH}/rc_test_run${nr} -} - -set +x -# Send to background an instance of the run_test_set() function for each number, -# record the pid. -for index in "${!VIRL_SERVER[@]}"; do - run_test_set ${index} & - pid=$! - echo "Sent to background: Test_set${index} (pid=$pid)" - pids[$pid]=$index -done - -echo -echo -n "Waiting..." - -# Watch the stable of background processes. -# If a pid goes away, remove it from the array. -while [ -n "${pids[*]}" ]; do - for i in $(seq 0 9); do - sleep 1 - echo -n "." - done - for pid in "${!pids[@]}"; do - if ! ps "$pid" >/dev/null; then - echo -e "\n" - echo "Test_set${pids[$pid]} with PID $pid finished." - unset pids[$pid] - fi - done - if [ -z "${!pids[*]}" ]; then - break - fi - echo -n -e "\nStill waiting for test set(s): ${pids[*]} ..." -done - -echo -echo "All test set runs finished." -echo - -set -x - -RC=0 -for index in "${!VIRL_SERVER[@]}"; do - echo "Test_set${index} log:" - cat ${LOG_PATH}/test_run${index}.log - RC_PARTIAL_RUN=$(cat ${LOG_PATH}/rc_test_run${index}) - if [ -z "$RC_PARTIAL_RUN" ]; then - echo "Failed to retrieve return code from test run ${index}" - exit 1 - fi - RC=$((RC+RC_PARTIAL_RUN)) - rm -f ${LOG_PATH}/rc_test_run${index} - rm -f ${LOG_PATH}/test_run${index}.log - echo -done - -# Log the final result -if [ "${RC}" -eq "0" ]; then - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all test loops: | PASS |" - echo "All critical tests have passed." - echo "========================================================================================================================================" - echo - set -x -else - if [ "${RC}" -eq "1" ]; then - HLP_STR="test has" - else - HLP_STR="tests have" - fi - set +x - echo - echo "========================================================================================================================================" - echo "Final result of all test loops: | FAIL |" - echo "${RC} critical ${HLP_STR} failed." - echo "========================================================================================================================================" - echo - set -x -fi - -echo Post-processing test data... - -partial_logs="" -for index in "${!VIRL_SERVER[@]}"; do - partial_logs="${partial_logs} ${LOG_PATH}/log_test_set_run${index}.xml" -done - -# Rebot output post-processing -rebot --noncritical EXPECTED_FAILING \ - --output output.xml ${partial_logs} - -# Remove unnecessary log files -rm -f ${partial_logs} - -echo Post-processing finished. - -if [ ${RC} -eq 0 ]; then - RETURN_STATUS=0 -else - RETURN_STATUS=1 -fi - -exit ${RETURN_STATUS} |