diff options
Diffstat (limited to 'docs/report/dpdk_performance_tests/packet_throughput_graphs')
3 files changed, 0 insertions, 339 deletions
diff --git a/docs/report/dpdk_performance_tests/packet_throughput_graphs/index.rst b/docs/report/dpdk_performance_tests/packet_throughput_graphs/index.rst deleted file mode 100644 index c1fc3f1bbc..0000000000 --- a/docs/report/dpdk_performance_tests/packet_throughput_graphs/index.rst +++ /dev/null @@ -1,39 +0,0 @@ -Packet Throughput Graphs -======================== - -Plotted results are generated by multiple executions of the same CSIT -performance tests across three physical testbeds within LF FD.io labs. -To provide a descriptive summary view, Box-and-Whisker plots are used to -display variation in measured throughput values, without making any -assumptions of the underlying statistical distribution. - -For each plotted test case, Box-and-Whisker plots show the quartiles -(Min, 1st quartile / 25th percentile, 2nd quartile / 50th percentile / -mean, 3rd quartile / 75th percentile, Max) across collected data set -(data set size stated in the note below). Outliers are plotted as -individual points. Min and max values are plotted as bottom and top -Whiskers respectively. 2nd and 3rd quartiles are plotted as bottom and -top edge of the box. If multiple samples match only two values, and all -samples fall between them, then no whiskers are plotted. If all samples -have the same value, only a horizontal line is plotted. - -*Title of each graph* is a regex (regular expression) matching all -throughput test cases plotted on this graph, *X-axis labels* are indices -of individual test suites executed by -`FD.io test executor dpdk performance jobs`_ jobs that created result output -files used as data sources for the graph, *Y-axis labels* are measured Packets -Per Second [pps] values, and the *Graph legend* lists the plotted test suites -and their indices. - -.. note:: - - Test results have been generated by - `FD.io test executor dpdk performance jobs`_ with Robot Framework result - files csit-dpdk-perf-\*.zip `archived here <../../_static/archive/>`_. - Plotted data set size per test case is equal to the number of job executions - presented in this report version: **10**. - -.. toctree:: - - l2 - ip4 diff --git a/docs/report/dpdk_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/dpdk_performance_tests/packet_throughput_graphs/ip4.rst deleted file mode 100644 index 1ad08992bc..0000000000 --- a/docs/report/dpdk_performance_tests/packet_throughput_graphs/ip4.rst +++ /dev/null @@ -1,150 +0,0 @@ -IPv4 Routed-Forwarding -====================== - -Following sections include summary graphs ofL3FWD Phy-to-Phy performance with -packet routed forwarding, including NDR throughput (zero packet loss) -and PDR throughput (<0.5% packet loss). Performance is reported for L3FWD -running in multiple configurations of L3FWD pmd thread(s), a.k.a. L3FWD -data plane thread(s), and their physical CPU core(s) placement. - -NDR Throughput -~~~~~~~~~~~~~~ - -Testpmd NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-ipv4-ndrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipv4-ndrdisc} - \label{fig:64B-1t1c-ipv4-ndrdisc-dpdk} - \end{figure} - -*Figure 1. L3FWD 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-1t1c-ethip4-ip4base-l3fwd-ndrdisc' * - -Testpmd NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-ipv4-ndrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipv4-ndrdisc} - \label{fig:64B-2t2c-ipv4-ndrdisc-dpdk} - \end{figure} - -*Figure 2. L3FWD 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-2t2c-ethip4-ip4base-l3fwd-ndrdisc' * - -PDR Throughput -~~~~~~~~~~~~~~ - -L3FWD PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-ipv4-pdrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipv4-pdrdisc} - \label{fig:64B-1t1c-ipv4-pdrdisc-dpdk} - \end{figure} - -*Figure 3. L3FWD 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-1t1c-ethip4-ip4base-l3fwd-pdrdisc' * - -L3FWD PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-ipv4-pdrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipv4-pdrdisc} - \label{fig:64B-2t2c-ipv4-pdrdisc-dpdk} - \end{figure} - -*Figure 4. L3FWD 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-2t2c-ethip4-ip4base-l3fwd-pdrdisc' * diff --git a/docs/report/dpdk_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/dpdk_performance_tests/packet_throughput_graphs/l2.rst deleted file mode 100644 index d96bf9f37d..0000000000 --- a/docs/report/dpdk_performance_tests/packet_throughput_graphs/l2.rst +++ /dev/null @@ -1,150 +0,0 @@ -L2 Ethernet Interface Loop -========================== - -Following sections include summary graphs of DPDK Testpmd Phy-to-Phy performance -with L2 Ethernet Interface Loop, including NDR throughput (zero packet loss) -and PDR throughput (<0.5% packet loss). Performance is reported for Testpmd -running in multiple configurations of Testpmd pmd thread(s), a.k.a. Testpmd -data plane thread(s), and their physical CPU core(s) placement. - -NDR Throughput -~~~~~~~~~~~~~~ - -Testpmd NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-l2-ndrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-ndrdisc} - \label{fig:64B-1t1c-l2-ndrdisc-dpdk} - \end{figure} - -*Figure 1. Testpmd 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-1t1c-eth-l2xcbase-testpmd-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-1t1c-eth-l2xcbase-testpmd-ndrdisc' * - -Testpmd NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-l2-ndrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-ndrdisc} - \label{fig:64B-2t2c-l2-ndrdisc-dpdk} - \end{figure} - -*Figure 2. Testpmd 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-2t2c-eth-l2xcbase-testpmd-ndrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-2t2c-eth-l2xcbase-testpmd-ndrdisc' * - -PDR Throughput -~~~~~~~~~~~~~~ - -Testpmd PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-1t1c-l2-pdrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-pdrdisc} - \label{fig:64B-1t1c-l2-pdrdisc-dpdk} - \end{figure} - -*Figure 3. Testpmd 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-1t1c-eth-l2xcbase-testpmd-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-1t1c-eth-l2xcbase-testpmd-pdrdisc' * - -Testpmd PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. - -.. raw:: html - - <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/dpdk/64B-2t2c-l2-pdrdisc.html"></iframe> - -.. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_build/_static/dpdk/}} - \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-pdrdisc} - \label{fig:64B-2t2c-l2-pdrdisc-dpdk} - \end{figure} - -*Figure 4. Testpmd 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet -Looping.* - -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: - -.. only:: html - - .. program-output:: cd ../../../../../ && set +x && cd tests/dpdk/perf && grep -P '64B-2t2c-eth-l2xcbase-testpmd-pdrdisc' * - :shell: - -.. only:: latex - - .. code-block:: bash - - $ cd tests/dpdk/perf - $ grep -P '64B-2t2c-eth-l2xcbase-testpmd-pdrdisc' * |