diff options
Diffstat (limited to 'docs/report/introduction/physical_testbeds.rst')
| -rw-r--r-- | docs/report/introduction/physical_testbeds.rst | 393 |
1 files changed, 0 insertions, 393 deletions
diff --git a/docs/report/introduction/physical_testbeds.rst b/docs/report/introduction/physical_testbeds.rst deleted file mode 100644 index 5a9b1edf97..0000000000 --- a/docs/report/introduction/physical_testbeds.rst +++ /dev/null @@ -1,393 +0,0 @@ -.. _tested_physical_topologies: - -Performance Physical Testbeds -============================= - -All :abbr:`FD.io (Fast Data Input/Ouput)` :abbr:`CSIT (Continuous System -Integration and Testing)` performance test results included in this -report are executed on the physical testbeds hosted by :abbr:`LF (Linux -Foundation)` FD.io project, unless otherwise noted. - -Two physical server topology types are used: - -- **2-Node Topology**: Consists of one server acting as a System Under - Test (SUT) and one server acting as a Traffic Generator (TG), with - both servers connected into a ring topology. Used for executing tests - that require frame encapsulations supported by TG. - -- **3-Node Topology**: Consists of two servers acting as a Systems Under - Test (SUTs) and one server acting as a Traffic Generator (TG), with - all servers connected into a ring topology. Used for executing tests - that require frame encapsulations not supported by TG e.g. certain - overlay tunnel encapsulations and IPsec. Number of native Ethernet, - IPv4 and IPv6 encapsulation tests are also executed on these testbeds, - for comparison with 2-Node Topology. - -Current FD.io production testbeds are built with SUT servers based on -the following processor architectures: - -- Intel Xeon: Cascadelake 6252N, Icelake 8358. -- Intel Atom: Denverton C3858, Snowridge P5362. -- Arm: TaiShan 2280, hip07-d05, Neoverse N1. -- AMD EPYC: Zen2 7532. - -Server SUT performance depends on server and processor type, hence -results for testbeds based on different servers must be reported -separately, and compared if appropriate. - -Complete technical specifications of compute servers used in CSIT -physical testbeds are maintained in FD.io CSIT repository: -https://git.fd.io/csit/tree/docs/lab/testbed_specifications.md. - -Physical NICs and Drivers -------------------------- - -SUT and TG servers are equipped with a number of different NIC models. - -VPP is performance tested on SUTs with the following NICs and drivers: - -#. 2p10GE: x550, x553 Intel (codename Niantic) - - DPDK Poll Mode Driver (PMD). -#. 4p10GE: x710-DA4 Intel (codename Fortville, FVL) - - DPDK PMD. - - AVF in PMD mode. - - AF_XDP in PMD mode. -#. 2p25GE: xxv710-DA2 Intel (codename Fortville, FVL) - - DPDK PMD. - - AVF in PMD mode. - - AF_XDP in PMD mode. -#. 4p25GE: xxv710-DA4 Intel (codename Fortville, FVL) - - DPDK PMD. - - AVF in PMD mode. - - AF_XDP in PMD mode. -#. 4p25GE: E822-CQDA4 Intel (codename Columbiaville, CVL) - - DPDK PMD. - - AVF in PMD mode. -#. 2p100GE: cx556a-edat Mellanox ConnectX5 - - RDMA_core in PMD mode. -#. 2p100GE: E810-2CQDA2 Intel (codename Columbiaville, CVL) - - DPDK PMD. - - AVF in PMD mode. - -DPDK applications, testpmd and l3fwd, are performance tested on the same -SUTs exclusively with DPDK drivers for all NICs. - -TRex running on TGs is using DPDK drivers for all NICs. - -VPP hoststack tests utilize ab (Apache HTTP server benchmarking tool) -running on TGs and using Linux drivers for all NICs. - -For more information see :ref:`vpp_test_environment` -and :ref:`dpdk_test_environment`. - -.. _physical_testbeds_2n_zn2: - -2-Node AMD EPYC Zen2 (2n-zn2) ------------------------------ - -One 2n-zn2 testbed in in operation in FD.io labs. It is built based on -two SuperMicro SuperMicro AS-1114S-WTRT servers, with SUT and TG servers -equipped with one AMD EPYC Zen2 7532 processor each (256 MB Cache, 2.40 -GHz, 32 cores). 2n-zn2 physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-2n-zn2} - \label{fig:testbed-2n-zn2} - \end{figure} - -.. only:: html - - .. figure:: testbed-2n-zn2.svg - :alt: testbed-2n-zn2 - :align: center - -SUT NICs: - -#. NIC-1: x710-DA4 4p10GE Intel. -#. NIC-2: xxv710-DA2 2p25GE Intel. -#. NIC-3: cx556a-edat ConnectX5 2p100GE Mellanox. - -TG NICs: - -#. NIC-1: x710-DA4 4p10GE Intel. -#. NIC-2: xxv710-DA2 2p25GE Intel. -#. NIC-3: cx556a-edat ConnectX5 2p100GE Mellanox. - -All AMD EPYC Zen2 7532 servers run with AMD SMT enabled, doubling the -number of logical cores exposed to Linux. - -.. _physical_testbeds_2n_clx: - -2-Node Xeon Cascadelake (2n-clx) --------------------------------- - -Three 2n-clx testbeds are in operation in FD.io labs. Each 2n-clx testbed -is built with two SuperMicro SYS-7049GP-TRT servers, SUTs are equipped with two -Intel Xeon Gold 6252N processors (35.75 MB Cache, 2.30 GHz, 24 cores). -TGs are equiped with Intel Xeon Cascade Lake Platinum 8280 processors (38.5 MB -Cache, 2.70 GHz, 28 cores). 2n-clx physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-2n-clx} - \label{fig:testbed-2n-clx} - \end{figure} - -.. only:: html - - .. figure:: testbed-2n-clx.svg - :alt: testbed-2n-clx - :align: center - -SUT NICs: - -#. NIC-1: x710-DA4 4p10GE Intel. -#. NIC-2: xxv710-DA2 2p25GE Intel. -#. NIC-3: cx556a-edat ConnectX5 2p100GE Mellanox. -#. NIC-4: empty, future expansion. -#. NIC-5: empty, future expansion. -#. NIC-6: empty, future expansion. - -TG NICs: - -#. NIC-1: x710-DA4 4p10GE Intel. -#. NIC-2: xxv710-DA2 2p25GE Intel. -#. NIC-3: cx556a-edat ConnectX5 2p100GE Mellanox. -#. NIC-4: empty, future expansion. -#. NIC-5: empty, future expansion. -#. NIC-6: x710-DA4 4p10GE Intel. (For self-tests.) - -All Intel Xeon Cascadelake servers run with Intel Hyper-Threading enabled, -doubling the number of logical cores exposed to Linux. - -.. _physical_testbeds_2n_icx: - -2-Node Xeon Icelake (2n-icx) ----------------------------- - -One 2n-icx testbed is in operation in FD.io labs. It is built with two -SuperMicro SYS-740GP-TNRT servers, each in turn equipped with two Intel Xeon -Platinum 8358 processors (48 MB Cache, 2.60 GHz, 32 cores). - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-2n-icx} - \label{fig:testbed-2n-icx} - \end{figure} - -.. only:: html - - .. figure:: testbed-2n-icx.svg - :alt: testbed-2n-icx - :align: center - -SUT and TG NICs: - -#. NIC-1: xxv710-DA2 2p25GE Intel. -#. NIC-2: E810-2CQDA2 2p100GbE Intel (* to be added). -#. NIC-3: E810-CQDA4 4p100GbE Intel (* to be added). - -All Intel Xeon Icelake servers run with Intel Hyper-Threading enabled, -doubling the number of logical cores exposed to Linux. - -.. _physical_testbeds_3n_icx: - -3-Node Xeon Icelake (3n-icx) ----------------------------- - -One 3n-icx testbed is in operation in FD.io labs. It is built with three -SuperMicro SYS-740GP-TNRT servers, each in turn equipped with two Intel Xeon -Platinum 8358 processors (48 MB Cache, 2.60 GHz, 32 cores). - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-3n-icx} - \label{fig:testbed-3n-icx} - \end{figure} - -.. only:: html - - .. figure:: testbed-3n-icx.svg - :alt: testbed-3n-icx - :align: center - -SUT and TG NICs: - -#. NIC-1: xxv710-DA2 2p25GE Intel. -#. NIC-2: E810-2CQDA2 2p100GbE Intel (* to be added). -#. NIC-3: E810-CQDA4 4p100GbE Intel (* to be added). - -All Intel Xeon Icelake servers run with Intel Hyper-Threading enabled, -doubling the number of logical cores exposed to Linux. - -.. _physical_testbeds_3n_alt: - -3-Node ARM Altra (3n-alt) ---------------------------- - -One 3n-tsh testbed is built with: i) one SuperMicro SYS-740GP-TNRT -server acting as TG and equipped with two Intel Xeon Icelake Platinum -8358 processors (80 MB Cache, 2.60 GHz, 32 cores), and ii) one Ampere -Altra server acting as SUT and equipped with two Q80-30 processors -(80* ARM Neoverse N1). 3n-alt physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-3n-alt} - \label{fig:testbed-3n-alt} - \end{figure} - -.. only:: html - - .. figure:: testbed-3n-alt.svg - :alt: testbed-3n-alt - :align: center - -SUT1 and SUT2 NICs: - -#. NIC-1: xl710-QDA2-2p40GE Intel. - -TG NICs: - -#. NIC-1: xxv710-DA2-2p25GE Intel. -#. NIC-2: xl710-QDA2-2p40GE Intel. -#. NIC-3: e810-XXVDA4-4p25GE Intel. -#. NIC-4: e810-2CQDA2-2p100GE Intel. - -.. _physical_testbeds_3n_tsh: - -3-Node ARM TaiShan (3n-tsh) ---------------------------- - -One 3n-tsh testbed is built with: i) one SuperMicro SYS-7049GP-TRT -server acting as TG and equipped with two Intel Xeon Skylake Platinum -8180 processors (38.5 MB Cache, 2.50 GHz, 28 cores), and ii) one Huawei -TaiShan 2280 server acting as SUT and equipped with one hip07-d05 -processor (64* ARM Cortex-A72). 3n-tsh physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-3n-tsh} - \label{fig:testbed-3n-tsh} - \end{figure} - -.. only:: html - - .. figure:: testbed-3n-tsh.svg - :alt: testbed-3n-tsh - :align: center - -SUT1 and SUT2 NICs: - -#. NIC-1: connectx4 2p25GE Mellanox. -#. NIC-2: x520 2p10GE Intel. - -TG NICs: - -#. NIC-1: x710-DA4 4p10GE Intel. -#. NIC-2: xxv710-DA2 2p25GE Intel. -#. NIC-3: xl710-QDA2 2p40GE Intel. - -.. _physical_testbeds_2n_tx2: - -2-Node ARM ThunderX2 (2n-tx2) ------------------------------ - -One 2n-tx2 testbed is built with: i) one SuperMicro SYS-7049GP-TRT -server acting as TG and equipped with two Intel Xeon Skylake Platinum -8180 processors (38.5 MB Cache, 2.50 GHz, 28 cores), and ii) one Marvell -ThnderX2 9975 (28* ThunderX2) server acting as SUT and equipped with two -ThunderX2 ARMv8 CN9975 processors. 2n-tx2 physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-2n-tx2} - \label{fig:testbed-2n-tx2} - \end{figure} - -.. only:: html - - .. figure:: testbed-2n-tx2.svg - :alt: testbed-2n-tx2 - :align: center - -SUT NICs: - -#. NIC-1: xl710-QDA2 2p40GE Intel (not connected). -#. NIC-2: xl710-QDA2 2p40GE Intel. - -TG NICs: - -#. NIC-1: xl710-QDA2 2p40GE Intel. - -.. _physical_testbeds_3n_snr: - -3-Node Atom Snowridge (3n-snr) ------------------------------- - -One 3n-snr testbed is built with: i) one SuperMicro SYS-740GP-TNRT -server acting as TG and equipped with two Intel Xeon Icelake Platinum -8358 processors (48 MB Cache, 2.60 GHz, 32 cores), and ii) SUT equipped with -one Intel Atom P5362 processor (27 MB Cache, 2.20 GHz, 24 cores). 3n-snr -physical topology is shown below. - -.. only:: latex - - .. raw:: latex - - \begin{figure}[H] - \centering - \graphicspath{{../_tmp/src/introduction/}} - \includegraphics[width=0.90\textwidth]{testbed-3n-snr} - \label{fig:testbed-3n-snr} - \end{figure} - -.. only:: html - - .. figure:: testbed-3n-snr.svg - :alt: testbed-3n-snr - :align: center - -SUT1 and SUT2 NICs: - -#. NIC-1: e822cq-DA4 4p25GE fiber Intel. - -TG NICs: - -#. NIC-1: e810xxv-DA4 4p25GE Intel. |