diff options
Diffstat (limited to 'docs/report/nsh_sfc_functional_tests')
| -rw-r--r-- | docs/report/nsh_sfc_functional_tests/overview.rst | 14 | ||||
| -rw-r--r-- | docs/report/nsh_sfc_functional_tests/test_environment.rst | 441 |
2 files changed, 6 insertions, 449 deletions
diff --git a/docs/report/nsh_sfc_functional_tests/overview.rst b/docs/report/nsh_sfc_functional_tests/overview.rst index 79403a2272..6420d6a660 100644 --- a/docs/report/nsh_sfc_functional_tests/overview.rst +++ b/docs/report/nsh_sfc_functional_tests/overview.rst @@ -4,15 +4,13 @@ Overview Tested Virtual Topologies
-------------------------
-CSIT NSH_SFC functional tests are executed on virtualized topologies created
-using Virtual Internet Routing Lab (VIRL) simulation platform contributed by
+CSIT NSH_SFC functional tests are executed on virtualized topologies created using
+:abbr:`VIRL (Virtual Internet Routing Lab)` simulation platform contributed by
Cisco. VIRL runs on physical baremetal servers hosted by LF FD.io project.
-Majority,of the tests are executed in the three node logical test topology -
+Majority of the tests are executed in the three node logical test topology -
Traffic Generator (TG) node and two Systems Under Test (SUT) nodes connected in
a loop. Some tests use two node logical test topology - TG node and SUT1 node.
-Both logical test topologies are shown in the figures below.
-
-::
+Both logical test topologies are shown in the figures below.::
+------------------------+ +------------------------+
| | | |
@@ -68,9 +66,7 @@ For the test cases that require DUT (VPP) to communicate with VM over the vhost-user interfaces, a nested VM is created on SUT1 and/or SUT2 for the
duration of these particular test cases only. DUT (VPP) test topology with VM
is shown in the figure below including the applicable packet flow thru the VM
-(marked in the figure with ``***``).
-
-::
+(marked in the figure with ``***``).::
+------------------------+ +------------------------+
| +----------+ | | +----------+ |
diff --git a/docs/report/nsh_sfc_functional_tests/test_environment.rst b/docs/report/nsh_sfc_functional_tests/test_environment.rst index 79ca0e90c7..ca7285d5e7 100644 --- a/docs/report/nsh_sfc_functional_tests/test_environment.rst +++ b/docs/report/nsh_sfc_functional_tests/test_environment.rst @@ -1,440 +1 @@ -Test Environment
-================
-
-CSIT NSH_SFC functional tests are currently executed in FD.IO VIRL testbed. The
-physical VIRL testbed infrastructure consists of three identical VIRL hosts:
-
-- All hosts are Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @2.30GHz,
- 18c, 512GB RAM)
-- Hosts run Ubuntu 14.04.3
-- VIRL software versions:
-
- - STD server version 0.10.24.7
- - UWM server version 0.10.24.7
-
-The VIRL host to run VIRL simulation is selected based on least load algorithm
-per VIRL simulation.
-
-Every VIRL simulation uses the same three-node - Traffic Generator (TG node) and
-two Systems Under Test (SUT1 and SUT2) - "double-ring" topology. The appropriate
-pre-built VPP packages built by Jenkins for the patch under review are then
-installed on the two SUTs, along with their /etc/vpp/startup.conf file, in all
-VIRL simulations.
-
-SUT Configuration - VIRL Guest VM
----------------------------------
-
-Configuration of the SUT VMs is defined in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl
-
-- List of SUT VM interfaces:::
-
- <interface id="0" name="GigabitEthernet0/4/0"/>
- <interface id="1" name="GigabitEthernet0/5/0"/>
- <interface id="2" name="GigabitEthernet0/6/0"/>
- <interface id="3" name="GigabitEthernet0/7/0"/>
-
-- Number of 2MB hugepages: 1024
-
-- Maximum number of memory map areas: 20000
-
-- Kernel Shared Memory Max: 2147483648 (vm.nr_hugepages * 2 * 1024 * 1024)
-
-SUT Configuration - VIRL Guest OS Linux
----------------------------------------
-
-In CSIT terminology, the VM operating system for both SUTs that |vpp-release| has
-been tested with, is the following:
-
-**#. Ubuntu VIRL image**
-
-This image implies Ubuntu 16.04.1 LTS, current as of yyyy-mm-dd (that is,
-package versions are those that would have been installed by a "apt-get update",
-"apt-get upgrade" on that day), produced by CSIT disk image build scripts.
-
-The exact list of installed packages and their versions (including the Linux
-kernel package version) are included in CSIT source repository:
-
- resources/tools/disk-image-builder/ubuntu/lists/|virl-image-ubuntu|
-
-A replica of this VM image can be built by running the "build.sh" script in CSIT
-repository resources/tools/disk-image-builder/ubuntu.
-
-**#. CentOS VIRL image**
-
-The Centos7.3 image is ready to be used but no tests running on it now.
-Corresponding Jenkins jobs are under preparation.
-
-The exact list of installed packages and their versions (including the Linux
-kernel package version) are included in CSIT source repository:
-
- resources/tools/disk-image-builder/ubuntu/lists/|virl-image-centos|
-
-A replica of this VM image can be built by running the "build.sh" script in CSIT
-repository resources/tools/disk-image-builder/centos.
-
-**#. Nested VM image**
-
-In addition to the "main" VM image, tests which require VPP to communicate to a
-VM over a vhost-user interface, utilize a "nested" VM image.
-
-This "nested" VM is dynamically created and destroyed as part of a test case,
-and therefore the "nested" VM image is optimized to be small, lightweight and
-have a short boot time. The "nested" VM image is not built around any
-established Linux distribution, but is based on `BuildRoot
-<https://buildroot.org/>`_, a tool for building embedded Linux systems. Just as
-for the "main" image, scripts to produce an identical replica of the "nested"
-image are included in CSIT GIT repository, and the image can be rebuilt using
-the "build.sh" script at:
-
- resources/tools/disk-image-builder/ubuntu/lists/nested
-
-DUT Configuration - VPP
------------------------
-
-Every System Under Test runs VPP SW application in Linux user-mode as a Device
-Under Test (DUT) node.
-
-**DUT port configuration**
-
-Port configuration of DUTs is defined in topology file that is generated per
-VIRL simulation based on the definition stored in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml
-
-Example of DUT nodes configuration:::
-
- DUT1:
- type: DUT
- host: "10.30.51.157"
- port: 22
- username: cisco
- honeycomb:
- user: admin
- passwd: admin
- port: 8183
- netconf_port: 2831
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port1:
- mac_address: "fa:16:3e:9b:89:52"
- pci_address: "0000:00:04.0"
- link: link1
- port2:
- mac_address: "fa:16:3e:7a:33:60"
- pci_address: "0000:00:05.0"
- link: link4
- port3:
- mac_address: "fa:16:3e:29:b7:ae"
- pci_address: "0000:00:06.0"
- link: link3
- port4:
- mac_address: "fa:16:3e:76:8d:ff"
- pci_address: "0000:00:07.0"
- link: link6
- DUT2:
- type: DUT
- host: "10.30.51.156"
- port: 22
- username: cisco
- honeycomb:
- user: admin
- passwd: admin
- port: 8183
- netconf_port: 2831
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port1:
- mac_address: "fa:16:3e:ad:6c:7d"
- pci_address: "0000:00:04.0"
- link: link2
- port2:
- mac_address: "fa:16:3e:94:a4:99"
- pci_address: "0000:00:05.0"
- link: link5
- port3:
- mac_address: "fa:16:3e:75:92:da"
- pci_address: "0000:00:06.0"
- link: link3
- port4:
- mac_address: "fa:16:3e:2c:b1:2a"
- pci_address: "0000:00:07.0"
- link: link6
-
-**VPP Version**
-
-|vpp-release|
-
-**VPP Installed Packages**
-::
-
- $ dpkg -l vpp\*
- Desired=Unknown/Install/Remove/Purge/Hold
- | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
- |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
- ||/ Name Version Architecture Description
- +++-==============-=============-============-=============================================
- ii vpp 17.07-release amd64 Vector Packet Processing--executables
- ii vpp-dbg 17.07-release amd64 Vector Packet Processing--debug symbols
- ii vpp-dev 17.07-release amd64 Vector Packet Processing--development support
- ii vpp-dpdk-dev 17.07-release amd64 Vector Packet Processing--development support
- ii vpp-dpdk-dkms 17.07-release amd64 DPDK 2.1 igb_uio_driver
- ii vpp-lib 17.07-release amd64 Vector Packet Processing--runtime libraries
- ii vpp-plugins 17.07-release amd64 Vector Packet Processing--runtime plugins
-
-**VPP Startup Configuration**
-
-VPP startup configuration is common for all test cases.
-
-::
-
- $ cat /etc/vpp/startup.conf
- unix {
- nodaemon
- log /tmp/vpp.log
- full-coredump
- }
-
- api-trace {
- on
- }
-
- api-segment {
- gid vpp
- }
-
- cpu {
- ## In the VPP there is one main thread and optionally the user can create worker(s)
- ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
-
- ## Manual pinning of thread(s) to CPU core(s)
-
- ## Set logical CPU core where main thread runs
- # main-core 1
-
- ## Set logical CPU core(s) where worker threads are running
- # corelist-workers 2-3,18-19
-
- ## Automatic pinning of thread(s) to CPU core(s)
-
- ## Sets number of CPU core(s) to be skipped (1 ... N-1)
- ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
- ## The main thread is automatically pinned to the first available CPU core and worker(s)
- ## are pinned to next free CPU core(s) after core assigned to main thread
- # skip-cores 4
-
- ## Specify a number of workers to be created
- ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
- ## and main thread's CPU core
- # workers 2
-
- ## Set scheduling policy and priority of main and worker threads
-
- ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
- ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
- # scheduler-policy fifo
-
- ## Scheduling priority is used only for "real-time policies (fifo and rr),
- ## and has to be in the range of priorities supported for a particular policy
- # scheduler-priority 50
- }
-
- dpdk {
- ## Change default settings for all intefaces
- # dev default {
- ## Number of receive queues, enables RSS
- ## Default is 1
- # num-rx-queues 3
-
- ## Number of transmit queues, Default is equal
- ## to number of worker threads or 1 if no workers treads
- # num-tx-queues 3
-
- ## Number of descriptors in transmit and receive rings
- ## increasing or reducing number can impact performance
- ## Default is 1024 for both rx and tx
- # num-rx-desc 512
- # num-tx-desc 512
-
- ## VLAN strip offload mode for interface
- ## Default is off
- # vlan-strip-offload on
- # }
-
- ## Whitelist specific interface by specifying PCI address
- # dev 0000:02:00.0
-
- ## Whitelist specific interface by specifying PCI address and in
- ## addition specify custom parameters for this interface
- # dev 0000:02:00.1 {
- # num-rx-queues 2
- # }
-
- ## Change UIO driver used by VPP, Options are: uio_pci_generic, vfio-pci
- ## and igb_uio (default)
- # uio-driver uio_pci_generic
-
- ## Disable mutli-segment buffers, improves performance but
- ## disables Jumbo MTU support
- # no-multi-seg
-
- ## Increase number of buffers allocated, needed only in scenarios with
- ## large number of interfaces and worker threads. Value is per CPU socket.
- ## Default is 32768
- # num-mbufs 128000
-
- ## Change hugepages allocation per-socket, needed only if there is need for
- ## larger number of mbufs. Default is 256M on each detected CPU socket
- # socket-mem 2048,2048
- }
-
-TG Configuration
-----------------
-
-Traffic Generator node is VM running the same OS Linux as SUTs. Ports of this
-VM are used as source (Tx) and destination (Rx) ports for the traffic.
-
-Traffic scripts of test cases are executed on this VM.
-
-**TG VM configuration**
-
-Configuration of the TG VMs is defined in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl
-
-- List of TG VM interfaces:::
-
- <interface id="0" name="eth1"/>
- <interface id="1" name="eth2"/>
- <interface id="2" name="eth3"/>
- <interface id="3" name="eth4"/>
- <interface id="4" name="eth5"/>
- <interface id="5" name="eth6"/>
-
-**TG node port configuration**
-
-Port configuration of TG is defined in topology file that is generated per VIRL
-simulation based on the definition stored in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml
-
-Example of TG node configuration:::
-
- TG:
- type: TG
- host: "10.30.51.155"
- port: 22
- username: cisco
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port3:
- mac_address: "fa:16:3e:b9:e1:27"
- pci_address: "0000:00:06.0"
- link: link1
- driver: virtio-pci
- port4:
- mac_address: "fa:16:3e:e9:c8:68"
- pci_address: "0000:00:07.0"
- link: link4
- driver: virtio-pci
- port5:
- mac_address: "fa:16:3e:e8:d3:47"
- pci_address: "0000:00:08.0"
- link: link2
- driver: virtio-pci
- port6:
- mac_address: "fa:16:3e:cf:ca:58"
- pci_address: "0000:00:09.0"
- link: link5
- driver: virtio-pci
-
-**Traffic generator**
-
-Functional tests utilize Scapy as a traffic generator. There was used Scapy
-v2.3.1 for |vpp-release| tests.
-
+.. include:: ../vpp_functional_tests/test_environment.rst
|