diff options
Diffstat (limited to 'docs/report/vpp_functional_tests_virl')
5 files changed, 0 insertions, 685 deletions
diff --git a/docs/report/vpp_functional_tests_virl/csit_release_notes.rst b/docs/report/vpp_functional_tests_virl/csit_release_notes.rst deleted file mode 100644 index 6035ddb9ce..0000000000 --- a/docs/report/vpp_functional_tests_virl/csit_release_notes.rst +++ /dev/null @@ -1,99 +0,0 @@ - -.. |br| raw:: html - - <br /> - -CSIT Release Notes -================== - -Changes in CSIT |release| -------------------------- - -#. Naming change for all VPP functional test suites in VIRL - - - VPP functional test case names stayed unchanged - -#. VPP functional test environment changes - - - upgrade to Ubuntu 16.04 - - VM and vhost-user test environment optimizations - -#. Introduction of Centos tests - -#. Added VPP functional tests - - - more VM vhost-user tests - - more LISP tests - - more IPSec crypto tests - - IPv4 and IPv6 Equal-Cost Multi-Path routing tests - - Telemetry: - - IPFIX tests - - SPAN tests - -Functional Tests Naming ------------------------ - -CSIT |release| introduced a common structured naming convention for all -performance and functional tests. This change was driven by substantially -growing number and type of CSIT test cases. Firstly, the original practice did -not always follow any strict naming convention. Secondly test names did not -always clearly capture tested packet encapsulations, and the actual type or -content of the tests. Thirdly HW configurations in terms of NICs, ports and -their locality were not captured either. These were but few reasons that drove -the decision to change and define a new more complete and stricter test naming -convention, and to apply this to all existing and new test cases. - -The new naming should be intuitive for majority of the tests. The complete -description of CSIT test naming convention is provided on `CSIT test naming -page <https://wiki.fd.io/view/CSIT/csit-test-naming>`_. - -Here few illustrative examples of the new naming usage for functional test -suites: - -#. **Physical port to physical port - a.k.a. NIC-to-NIC, Phy-to-Phy, P2P** - - - *eth2p-ethip4-ip4base-func.robot* => 2 ports of Ethernet, IPv4 baseline - routed forwarding, functional tests. - -#. **Physical port to VM (or VM chain) to physical port - a.k.a. NIC2VM2NIC, - P2V2P, NIC2VMchain2NIC, P2V2V2P** - - - *eth2p-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot* => 2 ports of - Ethernet, IPv4 VXLAN Ethernet, L2 bridge-domain switching to/from two vhost - interfaces and one VM, functional tests. - -Known Issues ------------- - -Here is the list of known issues in CSIT |release| for VPP functional tests in VIRL: - -+-------------------------------------------------+-----------------------------------------------------------------+ -| ISSUE | DESCRIPTION | -+-------------------------------------------------+-----------------------------------------------------------------+ -| DHCPv4 client: Client responses to DHCPv4 OFFER | Client replies with DHCPv4 REQUEST message when received DHCPv4 | -| sent with different XID | OFFER message with different (wrong) XID. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| Softwire - MAP-E: Incorrect calculation of IPv6 | IPv6 destination address is wrongly calculated in case that | -| destination address when IPv4 prefix is 0 | IPv4 prefix is equal to 0 and IPv6 prefix is less than 40. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| Softwire - MAP-E: Map domain is created when | Map domain is created in case that the sum of suffix length of | -| incorrect parameters provided | IPv4 prefix and PSID length is greater than EA bits length. | -| | IPv6 destination address contains bits writen with PSID over | -| | the EA-bit length when IPv4 packet is sent. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| IPv6 RA: Incorrect IPv6 destination address in | Wrong IPv6 destination address (ff02::1) is used in ICMPv6 | -| response to ICMPv6 Router Solicitation | Router Advertisement packet sent as a response to received | -| | ICMPv6 Router Solicitation packet. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| IPFIX: IPv6_src key name reported instead of | The report contains IPv6_src key name instead of IPv6_dst when | -| IPv6_dst | classify session is configured with IPv6 destination address. | -| | Anyhow the correct IPv6 destination address is reported. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| SPAN: Tx traffic is not mirrored | Tx traffic is not mirrored from SPAN source port to SPAN | -| | destination port. |br| | -| | NOTE: Fix is going to be merged in vpp stable/1701. | -+-------------------------------------------------+-----------------------------------------------------------------+ -| SPAN: Packet trace always contains local0 as | There is reported wrong destination port in the traffic trace: | -| destination port | |br| SPAN: mirrored GigabitEthernet0/5/0 -> local0 |br| | -| | The (Rx) traffic is mirrored to correct destination port. | -+-------------------------------------------------+-----------------------------------------------------------------+ diff --git a/docs/report/vpp_functional_tests_virl/documentation.rst b/docs/report/vpp_functional_tests_virl/documentation.rst deleted file mode 100644 index 6904068516..0000000000 --- a/docs/report/vpp_functional_tests_virl/documentation.rst +++ /dev/null @@ -1,4 +0,0 @@ -Documentation
-=============
-
-Documentation is located on nexus repository https://docs.fd.io/csit/master/doc/tests.func.html.
diff --git a/docs/report/vpp_functional_tests_virl/index.rst b/docs/report/vpp_functional_tests_virl/index.rst deleted file mode 100644 index 564783b750..0000000000 --- a/docs/report/vpp_functional_tests_virl/index.rst +++ /dev/null @@ -1,10 +0,0 @@ -VPP Functional Tests VIRL -========================= - -.. toctree:: - - overview - csit_release_notes - test_environment - documentation - diff --git a/docs/report/vpp_functional_tests_virl/overview.rst b/docs/report/vpp_functional_tests_virl/overview.rst deleted file mode 100644 index 16c7ef7ba0..0000000000 --- a/docs/report/vpp_functional_tests_virl/overview.rst +++ /dev/null @@ -1,129 +0,0 @@ -Overview
-========
-
-Tested Topologies VIRL
-----------------------
-
-CSIT VPP functional tests are executed on virtualized topologies created using
-Virtual Internet Routing Lab (VIRL) simulation platform contributed by Cisco.
-VIRL runs on physical baremetal servers hosted by LF FD.io project. Majority
-of the tests are executed in the three node logical test topology - Traffic
-Generator (TG) node and two Systems Under Test (SUT) nodes connected in a
-loop. Some tests use two node logical test topology - TG node and SUT1 node.
-Both logical test topologies are shown in the figures below.
-
-::
-
- +------------------------+ +------------------------+
- | | | |
- | +------------------+ | | +------------------+ |
- | | <-----------------> | |
- | | | | | | | |
- | | DUT1 <-----------------> DUT2 | |
- | +--^--^------------+ | | +------------^--^--+ |
- | | | | | | | |
- | | | SUT1 | | SUT2 | | |
- +------------------------+ +------------------------+
- | | | |
- | | | |
- | | +-----------+ | |
- | +---------------> <---------------+ |
- | | TG | |
- +------------------> <------------------+
- +-----------+
-
- +------------------------+
- | |
- | +------------------+ |
- +---------------> <--------------+
- | | | | | |
- | |------------> DUT1 <-----------+ |
- | | | +--^--^------------+ | | |
- | | | | | |
- | | | SUT1 | | |
- | | +------------------------+ | |
- | | | |
- | | | |
- | | +-----------+ | |
- | +---------------> <---------------+ |
- | | TG | |
- +------------------> <------------------+
- +-----------+
-
-SUT1 and SUT2 are two VMs (Ubuntu or Centos, depending on the test suite), TG
-is a Traffic Generator (TG, another Ubuntu VM). SUTs run VPP SW application in
-Linux user-mode as a Device Under Test (DUT) within the VM. TG runs Scapy SW
-application as a packet Traffic Generator. Logical connectivity between SUTs
-and to TG is provided using virtual NICs using VMs' virtio driver.
-
-Virtual testbeds are created on-demand whenever a verification job is started
-(e.g. triggered by the gerrit patch submission) and destroyed upon completion
-of all functional tests. Each node is a Virtual Machine and each connection
-that is drawn on the diagram is available for use in any test case. During the
-test execution, all nodes are reachable thru the Management network connected
-to every node via dedicated virtual NICs and virtual links (not shown above
-for clarity).
-
-For the test cases that require DUT (VPP) to communicate with VM over the
-vhost-user interfaces, a nested VM is created on SUT1 and/or SUT2 for the
-duration of these particular test cases only. DUT (VPP) test topology with VM
-is shown in the figure below including the applicable packet flow thru the VM
-(marked in the figure with ``***``).
-
-::
-
- +------------------------+ +------------------------+
- | +----------+ | | +----------+ |
- | | VM | | | | VM | |
- | | ****** | | | | ****** | |
- | +--^----^--+ | | +--^----^--+ |
- | *| |* | | *| |* |
- | +------v----v------+ | | +------v----v------+ |
- | | * * |**|***********|**| * * | |
- | | ***** *******<----------------->******* ***** | |
- | | * DUT1 | | | | DUT2 * | |
- | +--^---------------+ | | +---------------^--+ |
- | *| | | |* |
- | *| SUT1 | | SUT2 |* |
- +------------------------+ +------------------^-----+
- *| |*
- *| |*
- *| +-----------+ |*
- *| | | |*
- *+------------------> TG <------------------+*
- ******************* | |********************
- +-----------+
-
-VPP Functional Tests Overview
------------------------------
-
-Following VPP functional test areas are included in the CSIT |release| with
-results listed in this report:
-
-- **DHCP - Client and Proxy** - Dynamic Host Control Protocol Client and Proxy
- for IPv4, IPv6.
-- **GRE Overlay Tunnels** - Generic Routing Encapsulation for IPv4.
-- **L2BD Ethernet Switching** - L2 Bridge-Domain switched-forwarding for
- untagged Ethernet, dot1q and dot1ad tagged.
-- **L2XC Ethernet Switching** - L2 Cross-Connect switched-forwarding for
- untagged Ethernet, dot1q and dot1ad tagged.
-- **LISP Overlay Tunnels** - Locator/ID Separation Protocol overlay tunnels and
- locator/id mapping control.
-- **Softwire Tunnels** - IPv4-in-IPv6 softwire tunnels.
-- **Cop Address Security** - address white-list and black-list filtering for
- IPv4, IPv6.
-- **IPSec - Tunnels and Transport** - IPSec tunnel and transport modes.
-- **IPv6 Routed-Forwarding** - IPv6 routed-forwarding, NS/ND, RA, ICMPv6.
-- **uRPF Source Security** - unicast Reverse Path Forwarding security.
-- **Tap Interface** - baseline Linux tap interface tests.
-- **Telemetry - IPFIX and SPAN** - IPFIX netflow statistics and SPAN port
- mirroring.
-- **VRF Routed-Forwarding** - multi-context IPVPN routed-forwarding for IPv4,
- IPv6.
-- **iACL Security** - ingress Access Control List security for IPv4, IPv6, MAC.
-- **IPv4 Routed-Forwarding** - IPv4 routed-forwarding, RPF, ARP, Proxy ARP,
- ICMPv4.
-- **QoS Policer Metering** - ingress packet rate measuring and marking for IPv4,
- IPv6.
-- **VLAN Tag Translation** - L2 VLAN tag translation 2to2, 2to1, 1to2, 1to1.
-- **VXLAN Overlay Tunnels** - VXLAN tunneling for L2-over-IP, for IPv4, IPv6.
diff --git a/docs/report/vpp_functional_tests_virl/test_environment.rst b/docs/report/vpp_functional_tests_virl/test_environment.rst deleted file mode 100644 index fc7c63351a..0000000000 --- a/docs/report/vpp_functional_tests_virl/test_environment.rst +++ /dev/null @@ -1,443 +0,0 @@ -Test Environment
-================
-
-CSIT functional tests are currently executed in FD.IO VIRL testbed. The physical
-VIRL testbed infrastructure consists of three identical VIRL hosts:
-
-- All hosts are Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @2.30GHz,
- 18c, 512GB RAM)
-- Hosts run Ubuntu 14.04.3
-- VIRL software versions:
-
- - STD server version 0.10.24.7
- - UWM server version 0.10.24.7
-
-Whenever a patch is submitted to gerrit for review, parallel VIRL simulations
-are started to reduce the time of execution of all functional tests. The number
-of parallel VIRL simulations is equal to number of test groups defined by
-TEST_GROUPS variable in csit/bootstrap.sh file. The VIRL host to run VIRL
-simulation is selected randomly per VIRL simulation.
-
-Every VIRL simulation uses the same three-node - Traffic Generator (TG node) and
-two Systems Under Test (SUT1 and SUT2) - "double-ring" topology. The appropriate
-pre-built VPP packages built by Jenkins for the patch under review are then
-installed on the two SUTs, along with their /etc/vpp/startup.conf file, in all
-VIRL simulations.
-
-SUT Configuration - VIRL Guest VM
----------------------------------
-
-Configuration of the SUT VMs is defined in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl
-
-- List of SUT VM interfaces:::
-
- <interface id="0" name="GigabitEthernet0/4/0"/>
- <interface id="1" name="GigabitEthernet0/5/0"/>
- <interface id="2" name="GigabitEthernet0/6/0"/>
- <interface id="3" name="GigabitEthernet0/7/0"/>
-
-- Number of 2MB hugepages: 1024
-
-- Maximum number of memory map areas: 20000
-
-- Kernel Shared Memory Max: 2147483648 (vm.nr_hugepages * 2 * 1024 * 1024)
-
-SUT Configuration - VIRL Guest OS Linux
----------------------------------------
-
-In CSIT terminology, the VM operating system for both SUTs that VPP 17.01 has
-been tested with, is the following:
-
-**#. ubuntu-16.04.1_2016-12-19_1.6**
-
-This image implies Ubuntu 16.04.1 LTS, current as of 2016/12/19 (that is,
-package versions are those that would have been installed by a "apt-get update",
-"apt-get upgrade" on December 19), produced by CSIT disk image build scripts
-version 1.6.
-
-The exact list of installed packages and their versions (including the Linux
-kernel package version) are included in CSIT source repository:
-
- resources/tools/disk-image-builder/ubuntu/lists/ubuntu-16.04.1_2016-12-19_1.6
-
-A replica of this VM image can be built by running the "build.sh" script in CSIT
-repository resources/tools/disk-image-builder/ubuntu.
-
-**#. centos-7.3-1611_2017-01-24_1.2**
-
-The Centos7.3 image is ready to be used but no tests running on it now.
-Corresponding Jenkins jobs are under preparation.
-
-The exact list of installed packages and their versions (including the Linux
-kernel package version) are included in CSIT source repository:
-
- resources/tools/disk-image-builder/ubuntu/lists/centos-7.3-1611_2017-01-24_1.2
-
-A replica of this VM image can be built by running the "build.sh" script in CSIT
-repository resources/tools/disk-image-builder/centos.
-
-**#. Nested VM image**
-
-In addition to the "main" VM image, tests which require VPP to communicate to a
-VM over a vhost-user interface, utilize a "nested" VM image.
-
-This "nested" VM is dynamically created and destroyed as part of a test case,
-and therefore the "nested" VM image is optimized to be small, lightweight and
-have a short boot time. The "nested" VM image is not built around any
-established Linux distribution, but is based on BuildRoot
-(https://buildroot.org/), a tool for building embedded Linux systems. Just as
-for the "main" image, scripts to produce an identical replica of the "nested"
-image are included in CSIT GIT repository, and the image can be rebuilt using
-the "build.sh" script at:
-
- resources/tools/disk-image-builder/ubuntu/lists/nested
-
-DUT Configuration - VPP
------------------------
-
-Every System Under Test runs VPP SW application in Linux user-mode as a Device
-Under Test (DUT) node.
-
-**DUT port configuration**
-
-Port configuration of DUTs is defined in topology file that is generated per
-VIRL simulation based on the definition stored in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml
-
-Example of DUT nodes configuration:::
-
- DUT1:
- type: DUT
- host: "10.30.51.157"
- port: 22
- username: cisco
- honeycomb:
- user: admin
- passwd: admin
- port: 8183
- netconf_port: 2831
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port1:
- mac_address: "fa:16:3e:9b:89:52"
- pci_address: "0000:00:04.0"
- link: link1
- port2:
- mac_address: "fa:16:3e:7a:33:60"
- pci_address: "0000:00:05.0"
- link: link4
- port3:
- mac_address: "fa:16:3e:29:b7:ae"
- pci_address: "0000:00:06.0"
- link: link3
- port4:
- mac_address: "fa:16:3e:76:8d:ff"
- pci_address: "0000:00:07.0"
- link: link6
- DUT2:
- type: DUT
- host: "10.30.51.156"
- port: 22
- username: cisco
- honeycomb:
- user: admin
- passwd: admin
- port: 8183
- netconf_port: 2831
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port1:
- mac_address: "fa:16:3e:ad:6c:7d"
- pci_address: "0000:00:04.0"
- link: link2
- port2:
- mac_address: "fa:16:3e:94:a4:99"
- pci_address: "0000:00:05.0"
- link: link5
- port3:
- mac_address: "fa:16:3e:75:92:da"
- pci_address: "0000:00:06.0"
- link: link3
- port4:
- mac_address: "fa:16:3e:2c:b1:2a"
- pci_address: "0000:00:07.0"
- link: link6
-
-**VPP Version**
-
-17.01-release_amd64
-
-**VPP Installed Packages**
-::
-
- $ dpkg -l vpp\*
- Desired=Unknown/Install/Remove/Purge/Hold
- | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
- |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
- ||/ Name Version Architecture Description
- +++-==============-=============-============-=============================================
- ii vpp 17.01-release amd64 Vector Packet Processing--executables
- ii vpp-dbg 17.01-release amd64 Vector Packet Processing--debug symbols
- ii vpp-dev 17.01-release amd64 Vector Packet Processing--development support
- ii vpp-dpdk-dev 17.01-release amd64 Vector Packet Processing--development support
- ii vpp-dpdk-dkms 17.01-release amd64 DPDK 2.1 igb_uio_driver
- ii vpp-lib 17.01-release amd64 Vector Packet Processing--runtime libraries
- ii vpp-plugins 17.01-release amd64 Vector Packet Processing--runtime plugins
-
-**VPP Startup Configuration**
-
-VPP startup configuration is common for all test cases.
-::
-
- $ cat /etc/vpp/startup.conf
- unix {
- nodaemon
- log /tmp/vpp.log
- full-coredump
- }
-
- api-trace {
- on
- }
-
- api-segment {
- gid vpp
- }
-
- cpu {
- ## In the VPP there is one main thread and optionally the user can create worker(s)
- ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
-
- ## Manual pinning of thread(s) to CPU core(s)
-
- ## Set logical CPU core where main thread runs
- # main-core 1
-
- ## Set logical CPU core(s) where worker threads are running
- # corelist-workers 2-3,18-19
-
- ## Automatic pinning of thread(s) to CPU core(s)
-
- ## Sets number of CPU core(s) to be skipped (1 ... N-1)
- ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
- ## The main thread is automatically pinned to the first available CPU core and worker(s)
- ## are pinned to next free CPU core(s) after core assigned to main thread
- # skip-cores 4
-
- ## Specify a number of workers to be created
- ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
- ## and main thread's CPU core
- # workers 2
-
- ## Set scheduling policy and priority of main and worker threads
-
- ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
- ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
- # scheduler-policy fifo
-
- ## Scheduling priority is used only for "real-time policies (fifo and rr),
- ## and has to be in the range of priorities supported for a particular policy
- # scheduler-priority 50
- }
-
- dpdk {
- ## Change default settings for all intefaces
- # dev default {
- ## Number of receive queues, enables RSS
- ## Default is 1
- # num-rx-queues 3
-
- ## Number of transmit queues, Default is equal
- ## to number of worker threads or 1 if no workers treads
- # num-tx-queues 3
-
- ## Number of descriptors in transmit and receive rings
- ## increasing or reducing number can impact performance
- ## Default is 1024 for both rx and tx
- # num-rx-desc 512
- # num-tx-desc 512
-
- ## VLAN strip offload mode for interface
- ## Default is off
- # vlan-strip-offload on
- # }
-
- ## Whitelist specific interface by specifying PCI address
- # dev 0000:02:00.0
-
- ## Whitelist specific interface by specifying PCI address and in
- ## addition specify custom parameters for this interface
- # dev 0000:02:00.1 {
- # num-rx-queues 2
- # }
-
- ## Change UIO driver used by VPP, Options are: uio_pci_generic, vfio-pci
- ## and igb_uio (default)
- # uio-driver uio_pci_generic
-
- ## Disable mutli-segment buffers, improves performance but
- ## disables Jumbo MTU support
- # no-multi-seg
-
- ## Increase number of buffers allocated, needed only in scenarios with
- ## large number of interfaces and worker threads. Value is per CPU socket.
- ## Default is 32768
- # num-mbufs 128000
-
- ## Change hugepages allocation per-socket, needed only if there is need for
- ## larger number of mbufs. Default is 256M on each detected CPU socket
- # socket-mem 2048,2048
- }
-
-TG Configuration
-----------------
-
-Traffic Generator node is VM running the same OS Linux as SUTs. Ports of this
-VM are used as source (Tx) and destination (Rx) ports for the traffic.
-
-Traffic scripts of test cases are executed on this VM.
-
-**TG VM configuration**
-
-Configuration of the TG VMs is defined in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl
-
-- List of TG VM interfaces:::
-
- <interface id="0" name="eth1"/>
- <interface id="1" name="eth2"/>
- <interface id="2" name="eth3"/>
- <interface id="3" name="eth4"/>
- <interface id="4" name="eth5"/>
- <interface id="5" name="eth6"/>
-
-**TG node port configuration**
-
-Port configuration of TG is defined in topology file that is generated per VIRL
-simulation based on the definition stored in file
-
- /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml
-
-Example of TG node configuration:::
-
- TG:
- type: TG
- host: "10.30.51.155"
- port: 22
- username: cisco
- priv_key: |
- -----BEGIN RSA PRIVATE KEY-----
- MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb
- v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd
- vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2
- 4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc
- 1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs
- 8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7
- 0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN
- EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN
- 0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU
- MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD
- p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW
- 79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG
- OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD
- GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef
- bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg
- 8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu
- f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u
- UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/
- +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT
- D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/
- sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn
- g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY
- qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8
- EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD
- BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN
- -----END RSA PRIVATE KEY-----
-
- interfaces:
- port3:
- mac_address: "fa:16:3e:b9:e1:27"
- pci_address: "0000:00:06.0"
- link: link1
- driver: virtio-pci
- port4:
- mac_address: "fa:16:3e:e9:c8:68"
- pci_address: "0000:00:07.0"
- link: link4
- driver: virtio-pci
- port5:
- mac_address: "fa:16:3e:e8:d3:47"
- pci_address: "0000:00:08.0"
- link: link2
- driver: virtio-pci
- port6:
- mac_address: "fa:16:3e:cf:ca:58"
- pci_address: "0000:00:09.0"
- link: link5
- driver: virtio-pci
-
-**Traffic generator**
-
-Functional tests utilize Scapy as a traffic generator. There was used Scapy
-v2.3.1 for VPP 17.01 tests.
-
|