diff options
Diffstat (limited to 'docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst')
| -rw-r--r-- | docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst | 87 |
1 files changed, 79 insertions, 8 deletions
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst index 5f35db1248..6596f69e71 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst @@ -17,13 +17,31 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc} + \label{fig:64B-1t1c-ethip4-ip4-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -32,14 +50,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc} + \label{fig:64B-2t2c-ethip4-ip4-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * PDR Throughput ~~~~~~~~~~~~~~ @@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc} + \label{fig:64B-1t1c-ethip4-ip4-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -67,12 +121,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc} + \label{fig:64B-2t2c-ethip4-ip4-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * |