1 files changed, 106 insertions, 6 deletions
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
index 47e3400840..46c9500a11 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst
@@ -17,6 +17,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc}
+            \label{fig:64B-1t1c-l2-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -24,14 +33,32 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc}
+            \label{fig:64B-1t1c-l2-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
 
 VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below.
@@ -40,6 +67,15 @@ in the graph below.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc}
+            \label{fig:64B-2t2c-l2-sel1-ndrdisc}
+    \end{figure}
+
 *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -47,14 +83,33 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc}
+            \label{fig:64B-2t2c-l2-sel2-ndrdisc}
+    \end{figure}
+
 *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" *
+
 
 PDR Throughput
 ~~~~~~~~~~~~~~
@@ -66,6 +121,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc}
+            \label{fig:64B-1t1c-l2-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -73,14 +137,32 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc}
+            \label{fig:64B-1t1c-l2-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*
 
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
-.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
-   :shell:
+.. only:: html
+
+   .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/l2
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" *
 
 VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
 in the graph below. PDR measured for 0.5% packet loss ratio.
@@ -89,6 +171,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio.
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc}
+            \label{fig:64B-2t2c-l2-sel1-pdrdisc}
+    \end{figure}
+
 *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (base).*
 
@@ -96,5 +187,14 @@ Switching (base).*
 
     <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe>
 
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc}
+            \label{fig:64B-2t2c-l2-sel2-pdrdisc}
+    \end{figure}
+
 *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet
 Switching (feature).*