diff options
Diffstat (limited to 'docs/report/vpp_performance_tests/packet_throughput_graphs')
7 files changed, 620 insertions, 54 deletions
diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst index 5f35db1248..6596f69e71 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4.rst @@ -17,13 +17,31 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-ndrdisc} + \label{fig:64B-1t1c-ethip4-ip4-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -32,14 +50,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-ndrdisc} + \label{fig:64B-2t2c-ethip4-ip4-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-ndrdisc' * PDR Throughput ~~~~~~~~~~~~~~ @@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ip4-pdrdisc} + \label{fig:64B-1t1c-ethip4-ip4-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-1t1c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -67,12 +121,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ip4-pdrdisc} + \label{fig:64B-2t2c-ethip4-ip4-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4 && grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * + :shell: + +.. only:: latex + + .. code-block:: bash + $ cd tests/vpp/perf/ip4 + $ grep -P '64B-2t2c-ethip4(udp)*-ip4(base|scale[a-z0-9]*)(-iacl50-state(ful|less)-flows10k.*|-oacl50-state(ful|less)-flows10k.*|-snat.*|-udp.*|-cop.*|-iacldst.*|-ipolice.*)*-pdrdisc' * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst index 43fef1a20c..71dc06e9b3 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip4_tunnels.rst @@ -17,14 +17,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-ndrdisc} + \label{fig:64B-1t1c-ethip4-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -33,13 +51,31 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-ndrdisc} + \label{fig:64B-2t2c-ethip4-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-ndrdisc" * PDR Throughput ~~~~~~~~~~~~~~ @@ -51,14 +87,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ethip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ethip4-pdrdisc} + \label{fig:64B-1t1c-ethip4-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-1t1c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -67,11 +121,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ethip4-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ethip4-pdrdisc} + \label{fig:64B-2t2c-ethip4-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv4 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip4_tunnels && grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + $ cd tests/vpp/perf/ip4_tunnels + $ grep -E "64B-2t2c-ethip4[a-z0-9]+-[a-z0-9]*-pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst index 9a756f6d42..959559c407 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6.rst @@ -17,14 +17,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-ndrdisc} + \label{fig:78B-1t1c-ethip6-ip6-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6 + $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -33,14 +51,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-ndrdisc} + \label{fig:78B-2t2c-ethip6-ip6-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6 + $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*ndrdisc" * PDR Throughput ~~~~~~~~~~~~~~ @@ -52,14 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ip6-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ip6-pdrdisc} + \label{fig:78B-1t1c-ethip6-ip6-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6 + $ grep -E "78B-1t1c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -68,11 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ip6-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ip6-pdrdisc} + \label{fig:78B-2t2c-ethip6-ip6-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Routed-Forwarding.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6 && grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6 + $ grep -E "78B-2t2c-ethip6-ip6[a-z0-9]+-[a-z-]*pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst index ca38658430..fa37b85155 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ip6_tunnels.rst @@ -17,14 +17,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-ndrdisc} + \label{fig:78B-1t1c-ethip6-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * VPP NDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -33,14 +51,32 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-ndrdisc} + \label{fig:78B-2t2c-ethip6-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-ndrdisc" * PDR Throughput ~~~~~~~~~~~~~~ @@ -52,14 +88,32 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-pdrdisc} + \label{fig:78B-1t1c-ethip6-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-1t1c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * VPP PDR 78B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -68,11 +122,29 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-pdrdisc} + \label{fig:78B-2t2c-ethip6-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPv6 Overlay Tunnels.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/ip6_tunnels && grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/ip6_tunnels + $ grep -E "78B-2t2c-ethip6[a-z0-9]+-[a-z0-9]*-pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst index eba3a40e87..b59a521227 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst @@ -20,13 +20,31 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-ndrdisc} + \label{fig:64B-1t1c-ipsechw-ndrdisc} + \end{figure} + *Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -35,13 +53,31 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-ndrdisc} + \label{fig:64B-2t2c-ipsechw-ndrdisc} + \end{figure} + *Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * PDR Throughput ~~~~~~~~~~~~~~ @@ -53,13 +89,31 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-ipsechw-pdrdisc} + \label{fig:64B-1t1c-ipsechw-pdrdisc} + \end{figure} + *Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-1t1c-.*ipsec.*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -68,10 +122,28 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-ipsechw-pdrdisc} + \label{fig:64B-2t2c-ipsechw-pdrdisc} + \end{figure} + *Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/crypto && grep -E "64B-2t2c-.*ipsec.*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/crypto + $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" * diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst index 47e3400840..46c9500a11 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/l2.rst @@ -17,6 +17,15 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-ndrdisc} + \label{fig:64B-1t1c-l2-sel1-ndrdisc} + \end{figure} + *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* @@ -24,14 +33,32 @@ Switching (base).* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-ndrdisc} + \label{fig:64B-1t1c-l2-sel2-ndrdisc} + \end{figure} + *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/l2 + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -40,6 +67,15 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-ndrdisc} + \label{fig:64B-2t2c-l2-sel1-ndrdisc} + \end{figure} + *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* @@ -47,14 +83,33 @@ Switching (base).* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-ndrdisc} + \label{fig:64B-2t2c-l2-sel2-ndrdisc} + \end{figure} + *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/l2 + $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*ndrdisc" * + PDR Throughput ~~~~~~~~~~~~~~ @@ -66,6 +121,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel1-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel1-pdrdisc} + \label{fig:64B-1t1c-l2-sel1-pdrdisc} + \end{figure} + *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* @@ -73,14 +137,32 @@ Switching (base).* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-l2-sel2-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-l2-sel2-pdrdisc} + \label{fig:64B-1t1c-l2-sel2-pdrdisc} + \end{figure} + *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/l2 && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/l2 + $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn)-(iacl50-state(ful|less)-flows10k.*|oacl50-state(ful|less)-flows10k.*|eth.*)*pdrdisc" * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -89,6 +171,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel1-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel1-pdrdisc} + \label{fig:64B-2t2c-l2-sel1-pdrdisc} + \end{figure} + *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (base).* @@ -96,5 +187,14 @@ Switching (base).* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-l2-sel2-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-l2-sel2-pdrdisc} + \label{fig:64B-2t2c-l2-sel2-pdrdisc} + \end{figure} + *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-Phy L2 Ethernet Switching (feature).* diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst index bd1ef791a3..952e37cb69 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/vm_vhost.rst @@ -18,6 +18,15 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel1-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel1-ndrdisc} + \label{fig:64B-1t1c-vhost-sel1-ndrdisc} + \end{figure} + *Figure 1a. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* @@ -25,14 +34,32 @@ selected TCs.* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel2-ndrdisc} + \label{fig:64B-1t1c-vhost-sel2-ndrdisc} + \end{figure} + *Figure 1b. VPP 1thread 1core - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-1t1c-.*vhost.*-ndrdisc" * VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. @@ -41,6 +68,15 @@ in the graph below. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel1-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel1-ndrdisc} + \label{fig:64B-2t2c-vhost-sel1-ndrdisc} + \end{figure} + *Figure 2a. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* @@ -48,14 +84,32 @@ vhost-user selected TCs.* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-ndrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel2-ndrdisc} + \label{fig:64B-2t2c-vhost-sel2-ndrdisc} + \end{figure} + *Figure 2b. VPP 2threads 2cores - NDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-ndrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-2t2c-.*vhost.*-ndrdisc" * PDR Throughput ~~~~~~~~~~~~~~ @@ -67,6 +121,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel1-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel1-pdrdisc} + \label{fig:64B-1t1c-vhost-sel1-pdrdisc} + \end{figure} + *Figure 3a. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* @@ -74,14 +137,32 @@ vhost-user selected TCs.* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-vhost-sel2-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-1t1c-vhost-sel2-pdrdisc} + \label{fig:64B-1t1c-vhost-sel2-pdrdisc} + \end{figure} + *Figure 3b. VPP 1thread 1core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-1t1c-.*vhost.*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-1t1c-.*vhost.*-pdrdisc" * VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented in the graph below. PDR measured for 0.5% packet loss ratio. @@ -90,6 +171,15 @@ in the graph below. PDR measured for 0.5% packet loss ratio. <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel1-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel1-pdrdisc} + \label{fig:64B-2t2c-vhost-sel1-pdrdisc} + \end{figure} + *Figure 4a. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* @@ -97,11 +187,29 @@ vhost-user selected TCs.* <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-vhost-sel2-pdrdisc.html"></iframe> +.. raw:: latex + + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{64B-2t2c-vhost-sel2-pdrdisc} + \label{fig:64B-2t2c-vhost-sel2-pdrdisc} + \end{figure} + *Figure 4b. VPP 2thread 2core - PDR Throughput for Phy-to-VM-to-Phy VM vhost-user selected TCs.* CSIT source code for the test cases used for above plots can be found in CSIT git repository: -.. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-pdrdisc" * - :shell: +.. only:: html + + .. program-output:: cd ../../ && set -x && cd tests/vpp/perf/vm_vhost && grep -E "64B-2t2c-.*vhost.*-pdrdisc" * + :shell: + +.. only:: latex + + .. code-block:: bash + + $ cd tests/vpp/perf/vm_vhost + $ grep -E "64B-2t2c-.*vhost.*-pdrdisc" * |