diff options
Diffstat (limited to 'docs/report')
| -rw-r--r-- | docs/report/introduction/methodology.rst | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/docs/report/introduction/methodology.rst b/docs/report/introduction/methodology.rst index 931737d22b..16d3edacdb 100644 --- a/docs/report/introduction/methodology.rst +++ b/docs/report/introduction/methodology.rst @@ -4,6 +4,217 @@ Test Methodology ================ +VPP Forwarding Modes +-------------------- + +VPP is tested in a number of L2 and IP packet lookup and forwarding +modes. Within each mode baseline and scale tests are executed, the +latter with varying number of lookup entries. + +L2 Ethernet Switching +~~~~~~~~~~~~~~~~~~~~~ + +VPP is tested in three L2 forwarding modes: + +- *l2patch*: L2 patch, the fastest point-to-point L2 path that loops + packets between two interfaces without any Ethernet frame checks or + lookups. +- *l2xc*: L2 cross-connect, point-to-point L2 path with all Ethernet + frame checks, but no MAC learning and no MAC lookup. +- *l2bd*: L2 bridge-domain, multipoint-to-multipoint L2 path with all + Ethernet frame checks, with MAC learning (unless static MACs are used) + and MAC lookup. + +l2bd tests are executed in baseline and scale configurations: + +- *l2bdbase*: low number of L2 flows (253 per direction) is switched by + VPP. They drive the content of MAC FIB size (506 total MAC entries). + Both source and destination MAC addresses are incremented on a packet + by packet basis. + +- *l2bdscale*: high number of L2 flows is switched by VPP. Tested MAC + FIB sizes include: i) 10k (5k unique flows per direction), ii) 100k + (2x 50k flows) and iii) 1M (2x 500k). Both source and destination MAC + addresses are incremented on a packet by packet basis, ensuring new + entries are learn refreshed and looked up at every packet, making it + the worst case scenario. + +Ethernet wire encapsulations tested include: untagged, dot1q, dot1ad. + +IPv4 Routing +~~~~~~~~~~~~ + +IPv4 routing tests are executed in baseline and scale configurations: + +- *ip4base*: low number of IPv4 flows (253 per direction) is routed by + VPP. They drive the content of IPv4 FIB size (506 total /32 prefixes). + Destination IPv4 addresses are incremented on a packet by packet + basis. + +- *ip4scale*: high number of IPv4 flows is routed by VPP. Tested IPv4 + FIB sizes of /32 prefixes include: i) 20k (10k unique flows per + direction), ii) 200k (2x 100k flows) and iii) 2M (2x 1M). Destination + IPv4 addresses are incremented on a packet by packet basis, ensuring + new FIB entries are looked up at every packet, making it the worst + case scenario. + +IPv6 Routing +~~~~~~~~~~~~ + +IPv6 routing tests are executed in baseline and scale configurations: + +- *ip6base*: low number of IPv6 flows (253 per direction) is routed by + VPP. They drive the content of IPv6 FIB size (506 total /128 prefixes). + Destination IPv6 addresses are incremented on a packet by packet + basis. + +- *ip6scale*: high number of IPv6 flows is routed by VPP. Tested IPv6 + FIB sizes of /128 prefixes include: i) 20k (10k unique flows per + direction), ii) 200k (2x 100k flows) and iii) 2M (2x 1M). Destination + IPv6 addresses are incremented on a packet by packet basis, ensuring + new FIB entries are looked up at every packet, making it the worst + case scenario. + +SRv6 Routing +~~~~~~~~~~~~ + +SRv6 routing tests are executed in a number of baseline configurations, +in each case SR policy and steering policy are configured for one +direction and one (or two) SR behaviours (functions) in the other +directions: + +- *srv6enc1sid*: One SID (no SRH present), one SR function - End. +- *srv6enc2sids*: Two SIDs (SRH present), two SR functions - End and + End.DX6. +- *srv6enc2sids-nodecaps*: Two SIDs (SRH present) without decapsulation, + one SR function - End. +- *srv6proxy-dyn*: Dynamic SRv6 proxy, one SR function - End.AD. +- *srv6proxy-masq*: Masquerading SRv6 proxy, one SR function - End.AM. +- *srv6proxy-stat*: Static SRv6 proxy, one SR function - End.AS. + +In all listed cases low number of IPv6 flows (253 per direction) is +routed by VPP. + +Tunnel Encapsulations +--------------------- + +Tunnel encapsulations testing is grouped based on the type of outer +header: IPv4 or IPv6. + +IPv4 Tunnels +~~~~~~~~~~~~ + +VPP is tested in the following IPv4 tunnel baseline configurations: + +- *ip4vxlan-l2bdbase*: VXLAN over IPv4 tunnels with L2 bridge-domain MAC + switching. +- *ip4vxlan-l2xcbase*: VXLAN over IPv4 tunnels with L2 cross-connect. +- *ip4lispip4-ip4base*: LISP over IPv4 tunnels with IPv4 routing. +- *ip4lispip6-ip6base*: LISP over IPv4 tunnels with IPv6 routing. + +In all cases listed above low number of MAC, IPv4, IPv6 flows (253 per +direction) is switched or routed by VPP. + +In addition selected IPv4 tunnels are tested at scale: + +- *dot1q--ip4vxlanscale-l2bd*: VXLAN over IPv4 tunnels with L2 bridge- + domain MAC switching, with scaled up dot1q VLANs (10, 100, 1k), + mapped to scaled up L2 bridge-domains (10, 100, 1k), that are in turn + mapped to (10, 100, 1k) VXLAN tunnels. 64.5k flows are transmitted per + direction. + +IPv6 Tunnels +~~~~~~~~~~~~ + +VPP is tested in the following IPv6 tunnel baseline configurations: + +- *ip6lispip4-ip4base*: LISP over IPv4 tunnels with IPv4 routing. +- *ip6lispip6-ip6base*: LISP over IPv4 tunnels with IPv6 routing. + +In all cases listed above low number of IPv4, IPv6 flows (253 per +direction) is routed by VPP. + +VPP Features +------------ + +VPP is tested in a number of data plane feature configurations across +different forwarding modes. Following sections list features tested. + +ACL Security-Groups +~~~~~~~~~~~~~~~~~~~ + +Both stateless and stateful access control lists (ACL), also known as +security-groups, are supported by VPP. + +Following ACL configurations are tested for MAC switching with L2 +bridge-domains: + +- *l2bdbasemaclrn-iacl{E}sl-{F}flows*: Input stateless ACL, with {E} + entries and {F} flows. +- *l2bdbasemaclrn-oacl{E}sl-{F}flows*: Output stateless ACL, with {E} + entries and {F} flows. +- *l2bdbasemaclrn-iacl{E}sf-{F}flows*: Input stateful ACL, with {E} + entries and {F} flows. +- *l2bdbasemaclrn-oacl{E}sf-{F}flows*: Output stateful ACL, with {E} + entries and {F} flows. + +Following ACL configurations are tested with IPv4 routing: + +- *ip4base-iacl{E}sl-{F}flows*: Input stateless ACL, with {E} entries + and {F} flows. +- *ip4base-oacl{E}sl-{F}flows*: Output stateless ACL, with {E} entries + and {F} flows. +- *ip4base-iacl{E}sf-{F}flows*: Input stateful ACL, with {E} entries and + {F} flows. +- *ip4base-oacl{E}sf-{F}flows*: Output stateful ACL, with {E} entries + and {F} flows. + +ACL tests are executed with the following combinations of ACL entries +and number of flows: + +- ACL entry definitions + + - flow non-matching deny entry: (src-ip4, dst-ip4, src-port, dst-port). + - flow matching permit ACL entry: (src-ip4, dst-ip4). + +- {E} - number of non-matching deny ACL entries, {E} = [1, 10, 50]. +- {F} - number of UDP flows with different tuple (src-ip4, dst-ip4, + src-port, dst-port), {F} = [100, 10k, 100k]. +- All {E}x{F} combinations are tested per ACL type, total of 9. + +ACL MAC-IP +~~~~~~~~~~ + +MAC-IP binding ACLs are tested for MAC switching with L2 bridge-domains: + +- *l2bdbasemaclrn-macip-iacl{E}sl-{F}flows*: Input stateless ACL, with + {E} entries and {F} flows. + +MAC-IP ACL tests are executed with the following combinations of ACL +entries and number of flows: + +- ACL entry definitions + + - flow non-matching deny entry: (dst-ip4, dst-mac, bit-mask) + - flow matching permit ACL entry: (dst-ip4, dst-mac, bit-mask) + +- {E} - number of non-matching deny ACL entries, {E} = [1, 10, 50] +- {F} - number of UDP flows with different tuple (dst-ip4, dst-mac), + {F} = [100, 10k, 100k] +- All {E}x{F} combinations are tested per ACL type, total of 9. + +NAT44 +~~~~~ + +NAT44 is tested in baseline and scale configurations with IPv4 routing: + +- *ip4base-nat44*: baseline test with single NAT entry (addr, port), + single UDP flow. +- *ip4base-udpsrcscale{U}-nat44*: baseline test with {U} NAT entries + (addr, {U}ports), {U}=15. +- *ip4scale{R}-udpsrcscale{U}-nat44*: scale tests with {R}*{U} NAT + entries ({R}addr, {U}ports), {R}=[100, 1k, 2k, 4k], {U}=15. + Data Plane Throughput --------------------- |