aboutsummaryrefslogtreecommitdiffstats
path: root/docs/report
diff options
context:
space:
mode:
Diffstat (limited to 'docs/report')
-rw-r--r--docs/report/index.rst2
-rw-r--r--docs/report/introduction/methodology.rst393
-rw-r--r--docs/report/vpp_performance_tests/methodology.rst293
-rw-r--r--docs/report/vpp_performance_tests/overview.rst2
4 files changed, 396 insertions, 294 deletions
diff --git a/docs/report/index.rst b/docs/report/index.rst
index 952905ebc8..cd69997a59 100644
--- a/docs/report/index.rst
+++ b/docs/report/index.rst
@@ -7,6 +7,7 @@ CSIT 18.07
introduction/overview
introduction/general_notes
+ introduction/methodology
.. toctree::
:maxdepth: 2
@@ -14,7 +15,6 @@ CSIT 18.07
vpp_performance_tests/overview
vpp_performance_tests/csit_release_notes
- vpp_performance_tests/methodology
vpp_performance_tests/packet_throughput_graphs/index
vpp_performance_tests/throughput_speedup_multi_core/index
vpp_performance_tests/packet_latency_graphs/index
diff --git a/docs/report/introduction/methodology.rst b/docs/report/introduction/methodology.rst
new file mode 100644
index 0000000000..9e3ba04362
--- /dev/null
+++ b/docs/report/introduction/methodology.rst
@@ -0,0 +1,393 @@
+Performance Test Methodology
+============================
+
+Throughput
+----------
+
+Packet and bandwidth throughput are measured in accordance with
+:rfc:`2544`, using FD.io CSIT Multiple Loss Ratio search (MLRsearch), an
+optimized binary search algorithm, that measures SUT/DUT throughput at
+different Packet Loss Ratio (PLR) values.
+
+Following MLRsearch values are measured across a range of L2 frame sizes
+and reported:
+
+- **Non Drop Rate (NDR)**: packet and bandwidth throughput at PLR=0%.
+
+ - **Aggregate packet rate**: NDR_LOWER <bi-directional packet rate>
+ pps.
+ - **Aggregate bandwidth rate**: NDR_LOWER <bi-directional bandwidth
+ rate> Gbps.
+
+- **Partial Drop Rate (PDR)**: packet and bandwidth throughput at
+ PLR=0.5%.
+
+ - **Aggregate packet rate**: PDR_LOWER <bi-directional packet rate>
+ pps.
+ - **Aggregate bandwidth rate**: PDR_LOWER <bi-directional bandwidth
+ rate> Gbps.
+
+NDR and PDR are measured for the following L2 frame sizes (untagged
+Ethernet):
+
+- IPv4 payload: 64B, IMIX_v4_1 (28x64B, 16x570B, 4x1518B), 1518B, 9000B.
+- IPv6 payload: 78B, 1518B, 9000B.
+
+All rates are reported from external Traffic Generator perspective.
+
+Description of MLRsearch algorithm is provided in
+:ref:`mlrsearch_algorithm`.
+
+Maximum Receive Rate MRR
+------------------------
+
+MRR tests measure the packet forwarding rate under the maximum
+load offered by traffic generator over a set trial duration,
+regardless of packet loss. Maximum load for specified Ethernet frame
+size is set to the bi-directional link rate.
+
+Current parameters for MRR tests:
+
+- Ethernet frame sizes: 64B (78B for IPv6), IMIX, 1518B, 9000B; all
+ quoted sizes include frame CRC, but exclude per frame transmission
+ overhead of 20B (preamble, inter frame gap).
+
+- Maximum load offered: 10GE and 40GE link (sub-)rates depending on NIC
+ tested, with the actual packet rate depending on frame size,
+ transmission overhead and traffic generator NIC forwarding capacity.
+
+ - For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B,
+ a 10GE bi-directional link rate.
+ - For 25GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B,
+ a 25GE bi-directional link sub-rate limited by TG 25GE NIC used,
+ XXV710.
+ - For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B,
+ a 40GE bi-directional link sub-rate limited by TG 40GE NIC used,
+ XL710. Packet rate for other tested frame sizes is limited by PCIe
+ Gen3 x8 bandwidth limitation of ~50Gbps.
+
+- Trial duration: 10sec.
+
+Similarly to NDR/PDR throughput tests, MRR test should be reporting bi-
+directional link rate (or NIC rate, if lower) if tested VPP
+configuration can handle the packet rate higher than bi-directional link
+rate, e.g. large packet tests and/or multi-core tests.
+
+MRR tests are used for continuous performance trending and for
+comparison between releases. Daily trending job tests subset of frame
+sizes, focusing on 64B (78B for IPv6) for all tests and IMIX for
+selected tests (vhost, memif).
+
+Packet Latency
+--------------
+
+TRex Traffic Generator (TG) is used for measuring latency of VPP DUTs.
+Reported latency values are measured using following methodology:
+
+- Latency tests are performed at 100% of discovered NDR and PDR rates
+ for each throughput test and packet size (except IMIX).
+- TG sends dedicated latency streams, one per direction, each at the
+ rate of 9 kpps at the prescribed packet size; these are sent in
+ addition to the main load streams.
+- TG reports min/avg/max latency values per stream direction, hence two
+ sets of latency values are reported per test case; future release of
+ TRex is expected to report latency percentiles.
+- Reported latency values are aggregate across two SUTs due to three
+ node topology used for all performance tests; for per SUT latency,
+ reported value should be divided by two.
+- 1usec is the measurement accuracy advertised by TRex TG for the setup
+ used in FD.io labs used by CSIT project.
+- TRex setup introduces an always-on error of about 2*2usec per latency
+ flow additonal Tx/Rx interface latency induced by TRex SW writing and
+ reading packet timestamps on CPU cores without HW acceleration on NICs
+ closer to the interface line.
+
+Multi-Core Speedup
+------------------
+
+All performance tests are executed with single processor core and with
+multiple cores scenarios.
+
+Intel Hyper-Threading (HT)
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Intel Xeon processors used in FD.io CSIT can operate either in HT
+Disabled mode (single logical core per each physical core) or in HT
+Enabled mode (two logical cores per each physical core). HT setting is
+applied in BIOS and requires server SUT reload for it to take effect,
+making it impractical for continuous changes of HT mode of operation.
+
+CSIT |release| performance tests are executed with server SUTs' Intel
+XEON processors configured with Intel Hyper-Threading Disabled for all
+Xeon Haswell testbeds (3n-hsw) and with Intel Hyper-Threading Enabled
+for all Xeon Skylake testbeds.
+
+More information about physical testbeds is provided in
+:ref:`physical_testbeds`.
+
+Multi-core Tests
+~~~~~~~~~~~~~~~~
+
+CSIT |release| multi-core tests are executed in the following VPP worker
+thread and physical core configurations:
+
+#. Intel Xeon Haswell testbeds (3n-hsw) with Intel HT disabled
+ (1 logical CPU core per each physical core):
+
+ #. 1t1c - 1 VPP worker thread on 1 physical core.
+ #. 2t2c - 2 VPP worker threads on 2 physical cores.
+ #. 4t4c - 4 VPP worker threads on 4 physical cores.
+
+#. Intel Xeon Skylake testbeds (2n-skx, 3n-skx) with Intel HT enabled
+ (2 logical CPU cores per each physical core):
+
+ #. 2t1c - 2 VPP worker threads on 1 physical core.
+ #. 4t2c - 4 VPP worker threads on 2 physical cores.
+ #. 8t4c - 8 VPP worker threads on 4 physical cores.
+
+VPP worker threads are the data plane threads running on isolated
+logical cores. With Intel HT enabled VPP workers are placed as sibling
+threads on each used physical core. VPP control threads (main, stats)
+are running on a separate non-isolated core together with other Linux
+processes.
+
+In all CSIT tests care is taken to ensure that each VPP worker handles
+the same amount of received packet load and does the same amount of
+packet processing work. This is achieved by evenly distributing per
+interface type (e.g. physical, virtual) receive queues over VPP workers
+using default VPP round- robin mapping and by loading these queues with
+the same amount of packet flows.
+
+If number of VPP workers is higher than number of physical or virtual
+interfaces, multiple receive queues are configured on each interface.
+NIC Receive Side Scaling (RSS) for physical interfaces and multi-queue
+for virtual interfaces are used for this purpose.
+
+Section :ref:`throughput_speedup_multi_core` includes a set of graphs
+illustrating packet throughout speedup when running VPP worker threads
+on multiple cores. Note that in quite a few test cases running VPP
+workers on 2 or 4 physical cores hits the I/O bandwidth or packets-per-
+second limit of tested NIC.
+
+VPP Startup Settings
+--------------------
+
+CSIT code manipulates a number of VPP settings in startup.conf for optimized
+performance. List of common settings applied to all tests and test
+dependent settings follows.
+
+See `VPP startup.conf <https://git.fd.io/vpp/tree/src/vpp/conf/startup.conf?h=stable/1807>`_
+for a complete set and description of listed settings.
+
+Common Settings
+~~~~~~~~~~~~~~~
+
+List of vpp startup.conf settings applied to all tests:
+
+#. heap-size <value> - set separately for ip4, ip6, stats, main
+ depending on scale tested.
+#. no-tx-checksum-offload - disables UDP / TCP TX checksum offload in DPDK.
+ Typically needed for use faster vector PMDs (together with
+ no-multi-seg).
+#. socket-mem <value>,<value> - memory per numa. (Not required anymore
+ due to VPP code changes, should be removed in CSIT rls1810.)
+
+Per Test Settings
+~~~~~~~~~~~~~~~~~
+
+List of vpp startup.conf settings applied dynamically per test:
+
+#. corelist-workers <list_of_cores> - list of logical cores to run VPP
+ worker data plane threads. Depends on HyperThreading and core per
+ test configuration.
+#. num-rx-queues <value> - depends on a number of VPP threads and NIC
+ interfaces.
+#. num-rx-desc/num-tx-desc - number of rx/tx descriptors for specific
+ NICs, incl. xl710, x710, xxv710.
+#. num-mbufs <value> - increases number of buffers allocated, needed
+ only in scenarios with large number of interfaces and worker threads.
+ Value is per CPU socket. Default is 16384.
+#. no-multi-seg - disables multi-segment buffers in DPDK, improves
+ packet throughput, but disables Jumbo MTU support. Disabled for all
+ tests apart from the ones that require Jumbo 9000B frame support.
+#. UIO driver - depends on topology file definition.
+#. QAT VFs - depends on NRThreads, each thread = 1QAT VFs.
+
+KVM VMs vhost-user
+------------------
+
+FD.io CSIT performance lab is testing VPP vhost with KVM VMs using
+following environment settings:
+
+- Tests with varying Qemu virtio queue (a.k.a. vring) sizes: [vr256]
+ default 256 descriptors, [vr1024] 1024 descriptors to optimize for
+ packet throughput.
+- Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)`
+ settings: [cfs] default settings, [cfsrr1] CFS RoundRobin(1) policy
+ applied to all data plane threads handling test packet path including
+ all VPP worker threads and all Qemu testpmd poll-mode threads.
+- Resulting test cases are all combinations with [vr256,vr1024] and
+ [cfs,cfsrr1] settings.
+- Adjusted Linux kernel :abbr:`CFS (Completely Fair Scheduler)`
+ scheduler policy for data plane threads used in CSIT is documented in
+ `CSIT Performance Environment Tuning wiki <https://wiki.fd.io/view/CSIT/csit-perf-env-tuning-ubuntu1604>`_.
+- The purpose is to verify performance impact (MRR and NDR/PDR
+ throughput) and same test measurements repeatability, by making VPP
+ and VM data plane threads less susceptible to other Linux OS system
+ tasks hijacking CPU cores running those data plane threads.
+
+LXC/DRC Container Memif
+-----------------------
+
+CSIT |release| includes tests taking advantage of VPP memif virtual
+interface (shared memory interface) to interconnect VPP running in
+Containers. VPP vswitch instance runs in bare-metal user-mode handling
+NIC interfaces and connecting over memif (Slave side) to VPPs running in
+:abbr:`Linux Container (LXC)` or in Docker Container (DRC) configured
+with memif (Master side). LXCs and DRCs run in a priviliged mode with
+VPP data plane worker threads pinned to dedicated physical CPU cores per
+usual CSIT practice. All VPP instances run the same version of software.
+This test topology is equivalent to existing tests with vhost-user and
+VMs as described earlier in :ref:`tested_logical_topologies`.
+
+In addition to above vswitch tests, a single memif interface test is
+executed. It runs in a simple topology of two VPP container instances
+connected over memif interface in order to verify standalone memif
+interface performance.
+
+More information about CSIT LXC and DRC setup and control is available
+in :ref:`container_orchestration_in_csit`.
+
+K8s Container Memif
+-------------------
+
+CSIT |release| includes tests of VPP topologies running in K8s
+orchestrated Pods/Containers and connected over memif virtual
+interfaces. In order to provide simple topology coding flexibility and
+extensibility container orchestration is done with `Kubernetes
+<https://github.com/kubernetes>`_ using `Docker
+<https://github.com/docker>`_ images for all container applications
+including VPP. `Ligato <https://github.com/ligato>`_ is used for the
+Pod/Container networking orchestration that is integrated with K8s,
+including memif support.
+
+In these tests VPP vswitch runs in a K8s Pod with Docker Container (DRC)
+handling NIC interfaces and connecting over memif to more instances of
+VPP running in Pods/DRCs. All DRCs run in a priviliged mode with VPP
+data plane worker threads pinned to dedicated physical CPU cores per
+usual CSIT practice. All VPP instances run the same version of software.
+This test topology is equivalent to existing tests with vhost-user and
+VMs as described earlier in :ref:`tested_physical_topologies`.
+
+Further documentation is available in
+:ref:`container_orchestration_in_csit`.
+
+IPSec on Intel QAT
+------------------
+
+VPP IPSec performance tests are using DPDK cryptodev device driver in
+combination with HW cryptodev devices - Intel QAT 8950 50G - present in
+LF FD.io physical testbeds. DPDK cryptodev can be used for all IPSec
+data plane functions supported by VPP.
+
+Currently CSIT |release| implements following IPSec test cases:
+
+- AES-GCM, CBC-SHA1 ciphers, in combination with IPv4 routed-forwarding
+ with Intel xl710 NIC.
+- CBC-SHA1 ciphers, in combination with LISP-GPE overlay tunneling for
+ IPv4-over-IPv4 with Intel xl710 NIC.
+
+TRex Traffic Generator
+----------------------
+
+Usage
+~~~~~
+
+`TRex traffic generator <https://wiki.fd.io/view/TRex>`_ is used for all
+CSIT performance tests. TRex stateless mode is used to measure NDR and
+PDR throughputs using binary search (NDR and PDR discovery tests) and
+for quick checks of DUT performance against the reference NDRs (NDR
+check tests) for specific configuration.
+
+TRex is installed and run on the TG compute node. The typical procedure
+is:
+
+- If the TRex is not already installed on TG, it is installed in the
+ suite setup phase - see `TRex intallation`_.
+- TRex configuration is set in its configuration file
+ ::
+
+ /etc/trex_cfg.yaml
+
+- TRex is started in the background mode
+ ::
+
+ $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
+
+- There are traffic streams dynamically prepared for each test, based on traffic
+ profiles. The traffic is sent and the statistics obtained using
+ :command:`trex_stl_lib.api.STLClient`.
+
+Measuring Packet Loss
+~~~~~~~~~~~~~~~~~~~~~
+
+Following sequence is followed to measure packet loss:
+
+- Create an instance of STLClient.
+- Connect to the client.
+- Add all streams.
+- Clear statistics.
+- Send the traffic for defined time.
+- Get the statistics.
+
+If there is a warm-up phase required, the traffic is sent also before
+test and the statistics are ignored.
+
+Measuring Latency
+~~~~~~~~~~~~~~~~~
+
+If measurement of latency is requested, two more packet streams are
+created (one for each direction) with TRex flow_stats parameter set to
+STLFlowLatencyStats. In that case, returned statistics will also include
+min/avg/max latency values.
+
+HTTP/TCP with WRK tool
+----------------------
+
+`WRK HTTP benchmarking tool <https://github.com/wg/wrk>`_ is used for
+experimental TCP/IP and HTTP tests of VPP TCP/IP stack and built-in
+static HTTP server. WRK has been chosen as it is capable of generating
+significant TCP/IP and HTTP loads by scaling number of threads across
+multi-core processors.
+
+This in turn enables quite high scale benchmarking of the main TCP/IP
+and HTTP service including HTTP TCP/IP Connections-Per-Second (CPS),
+HTTP Requests-Per-Second and HTTP Bandwidth Throughput.
+
+The initial tests are designed as follows:
+
+- HTTP and TCP/IP Connections-Per-Second (CPS)
+
+ - WRK configured to use 8 threads across 8 cores, 1 thread per core.
+ - Maximum of 50 concurrent connections across all WRK threads.
+ - Timeout for server responses set to 5 seconds.
+ - Test duration is 30 seconds.
+ - Expected HTTP test sequence:
+
+ - Single HTTP GET Request sent per open connection.
+ - Connection close after valid HTTP reply.
+ - Resulting flow sequence - 8 packets: >Syn, <Syn-Ack, >Ack, >Req,
+ <Rep, >Fin, <Fin, >Ack.
+
+- HTTP Requests-Per-Second
+
+ - WRK configured to use 8 threads across 8 cores, 1 thread per core.
+ - Maximum of 50 concurrent connections across all WRK threads.
+ - Timeout for server responses set to 5 seconds.
+ - Test duration is 30 seconds.
+ - Expected HTTP test sequence:
+
+ - Multiple HTTP GET Requests sent in sequence per open connection.
+ - Connection close after set test duration time.
+ - Resulting flow sequence: >Syn, <Syn-Ack, >Ack, >Req[1], <Rep[1],
+ .., >Req[n], <Rep[n], >Fin, <Fin, >Ack.
diff --git a/docs/report/vpp_performance_tests/methodology.rst b/docs/report/vpp_performance_tests/methodology.rst
deleted file mode 100644
index 1de3fa4217..0000000000
--- a/docs/report/vpp_performance_tests/methodology.rst
+++ /dev/null
@@ -1,293 +0,0 @@
-Test Methodology
-================
-
-Multi-Core and Multi-Threading
-------------------------------
-
-**Intel Hyper-Threading** - CSIT |release| performance tests are executed with
-SUT servers' Intel XEON processors configured in Intel Hyper-Threading Disabled
-mode (BIOS setting). This is the simplest configuration used to establish
-baseline single-thread single-core application packet processing and forwarding
-performance. Subsequent releases of CSIT will add performance tests with Intel
-Hyper-Threading Enabled (requires BIOS settings change and hard reboot of
-server).
-
-**Multi-core Tests** - CSIT |release| multi-core tests are executed in the
-following VPP thread and core configurations:
-
-#. 1t1c - 1 VPP worker thread on 1 CPU physical core.
-#. 2t2c - 2 VPP worker threads on 2 CPU physical cores.
-#. 4t4c - 4 VPP worker threads on 4 CPU physical cores.
-
-VPP worker threads are the data plane threads. VPP control thread is
-running on a separate non-isolated core together with other Linux
-processes. Note that in quite a few test cases running VPP workers on 2
-or 4 physical cores hits the I/O bandwidth or packets-per-second limit
-of tested NIC.
-
-Section :ref:`throughput_speedup_multi_core` includes a set of graphs
-illustrating packet throughout speedup when running VPP on multiple
-cores.
-
-Packet Throughput
------------------
-
-Following values are measured and reported for packet throughput tests:
-
-- NDR binary search per :rfc:`2544`:
-
- - Packet rate: "RATE: <aggregate packet rate in packets-per-second> pps
- (2x <per direction packets-per-second>)";
- - Aggregate bandwidth: "BANDWIDTH: <aggregate bandwidth in Gigabits per
- second> Gbps (untagged)";
-
-- PDR binary search per :rfc:`2544`:
-
- - Packet rate: "RATE: <aggregate packet rate in packets-per-second> pps (2x
- <per direction packets-per-second>)";
- - Aggregate bandwidth: "BANDWIDTH: <aggregate bandwidth in Gigabits per
- second> Gbps (untagged)";
- - Packet loss tolerance: "LOSS_ACCEPTANCE <accepted percentage of packets
- lost at PDR rate>";
-
-- NDR and PDR are measured for the following L2 frame sizes (untagged
- Ethernet):
-
- - IPv4 payload: 64B, IMIX_v4_1 (28x64B,16x570B,4x1518B), 1518B, 9000B;
- - IPv6 payload: 78B, 1518B, 9000B;
-
-- NDR and PDR binary search resolution is determined by the final value of the
- rate change, referred to as the final step:
-
- - The final step is set to 50kpps for all NIC to NIC tests and all L2
- frame sizes except 9000B (changed from 100kpps used in previous
- releases).
-
- - The final step is set to 10kpps for all remaining tests, including 9000B
- and all vhost VM and memif Container tests.
-
-All rates are reported from external Traffic Generator perspective.
-
-Maximum Receive Rate (MRR)
---------------------------
-
-MRR tests measure the packet forwarding rate under the maximum
-load offered by traffic generator over a set trial duration,
-regardless of packet loss. Maximum load for specified Ethernet frame
-size is set to the bi-directional link rate.
-
-Current parameters for MRR tests:
-
-- Ethernet frame sizes: 64B (78B for IPv6 tests) for all tests, IMIX for
- selected tests (vhost, memif); all quoted sizes include frame CRC, but
- exclude per frame transmission overhead of 20B (preamble, inter frame
- gap).
-
-- Maximum load offered: 10GE and 40GE link (sub-)rates depending on NIC
- tested, with the actual packet rate depending on frame size,
- transmission overhead and traffic generator NIC forwarding capacity.
-
- - For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B,
- a 10GE bi-directional link rate.
- - For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B,
- a 40GE bi-directional link sub-rate limited by TG 40GE NIC used,
- XL710.
-
-- Trial duration: 10sec.
-
-Similarly to NDR/PDR throughput tests, MRR test should be reporting bi-
-directional link rate (or NIC rate, if lower) if tested VPP
-configuration can handle the packet rate higher than bi-directional link
-rate, e.g. large packet tests and/or multi-core tests.
-
-MRR tests are used for continuous performance trending and for
-comparison between releases.
-
-Packet Latency
---------------
-
-TRex Traffic Generator (TG) is used for measuring latency of VPP DUTs. Reported
-latency values are measured using following methodology:
-
-- Latency tests are performed at 10%, 50% of discovered NDR rate (non drop rate)
- for each NDR throughput test and packet size (except IMIX).
-- TG sends dedicated latency streams, one per direction, each at the rate of
- 10kpps at the prescribed packet size; these are sent in addition to the main
- load streams.
-- TG reports min/avg/max latency values per stream direction, hence two sets
- of latency values are reported per test case; future release of TRex is
- expected to report latency percentiles.
-- Reported latency values are aggregate across two SUTs due to three node
- topology used for all performance tests; for per SUT latency, reported value
- should be divided by two.
-- 1usec is the measurement accuracy advertised by TRex TG for the setup used in
- FD.io labs used by CSIT project.
-- TRex setup introduces an always-on error of about 2*2usec per latency flow -
- additonal Tx/Rx interface latency induced by TRex SW writing and reading
- packet timestamps on CPU cores without HW acceleration on NICs closer to the
- interface line.
-
-vhostuser with KVM VMs
-----------------------
-
-FD.io CSIT performance lab is testing VPP vhost with KVM VMs using following
-environment settings:
-
-- Tests with varying Qemu virtio queue (a.k.a. vring) sizes: [vr256] default 256
- descriptors, [vr1024] 1024 descriptors to optimize for packet throughput.
-
-- Tests with varying Linux :abbr:`CFS (Completely Fair Scheduler)` settings:
- [cfs] default settings, [cfsrr1] CFS RoundRobin(1) policy applied to all data
- plane threads handling test packet path including all VPP worker threads and
- all Qemu testpmd poll-mode threads.
-
-- Resulting test cases are all combinations with [vr256,vr1024] and
- [cfs,cfsrr1] settings.
-
-- Adjusted Linux kernel :abbr:`CFS (Completely Fair Scheduler)` scheduler policy
- for data plane threads used in CSIT is documented in
- `CSIT Performance Environment Tuning wiki <https://wiki.fd.io/view/CSIT/csit-perf-env-tuning-ubuntu1604>`_.
- The purpose is to verify performance impact (MRR and NDR/PDR
- throughput) and same test measurements repeatability, by making VPP
- and VM data plane threads less susceptible to other Linux OS system
- tasks hijacking CPU cores running those data plane threads.
-
-Memif with LXC and Docker Containers
-------------------------------------
-
-CSIT |release| includes tests taking advantage of VPP memif virtual
-interface (shared memory interface) to interconnect VPP running in
-Containers. VPP vswitch instance runs in bare-metal user-mode handling
-NIC interfaces and connecting over memif (Slave side) to VPPs running in
-:abbr:`Linux Container (LXC)` or in Docker Container (DRC) configured
-with memif (Master side). LXCs and DRCs run in a priviliged mode with
-VPP data plane worker threads pinned to dedicated physical CPU cores per
-usual CSIT practice. All VPP instances run the same version of software.
-This test topology is equivalent to existing tests with vhost-user and
-VMs as described earlier in :ref:`tested_physical_topologies`.
-
-More information about CSIT LXC and DRC setup and control is available
-in :ref:`container_orchestration_in_csit`.
-
-Memif with K8s Pods/Containers
-------------------------------
-
-CSIT |release| includes tests of VPP topologies running in K8s
-orchestrated Pods/Containers and connected over memif virtual
-interfaces. In order to provide simple topology coding flexibility and
-extensibility container orchestration is done with `Kubernetes
-<https://github.com/kubernetes>`_ using `Docker
-<https://github.com/docker>`_ images for all container applications
-including VPP. `Ligato <https://github.com/ligato>`_ is used for the
-Pod/Container networking orchestration that is integrated with K8s,
-including memif support.
-
-In these tests VPP vswitch runs in a K8s Pod with Docker Container (DRC)
-handling NIC interfaces and connecting over memif to more instances of
-VPP running in Pods/DRCs. All DRCs run in a priviliged mode with VPP
-data plane worker threads pinned to dedicated physical CPU cores per
-usual CSIT practice. All VPP instances run the same version of software.
-This test topology is equivalent to existing tests with vhost-user and
-VMs as described earlier in :ref:`tested_physical_topologies`.
-
-Further documentation is available in
-:ref:`container_orchestration_in_csit`.
-
-IPSec with Intel QAT HW cards
------------------------------
-
-VPP IPSec performance tests are using DPDK cryptodev device driver in
-combination with HW cryptodev devices - Intel QAT 8950 50G - present in
-LF FD.io physical testbeds. DPDK cryptodev can be used for all IPSec
-data plane functions supported by VPP.
-
-Currently CSIT |release| implements following IPSec test cases:
-
-- AES-GCM, CBC-SHA1 ciphers, in combination with IPv4 routed-forwarding
- with Intel xl710 NIC.
-- CBC-SHA1 ciphers, in combination with LISP-GPE overlay tunneling for
- IPv4-over-IPv4 with Intel xl710 NIC.
-
-TRex Traffic Generator Usage
-----------------------------
-
-`TRex traffic generator <https://wiki.fd.io/view/TRex>`_ is used for all
-CSIT performance tests. TRex stateless mode is used to measure NDR and PDR
-throughputs using binary search (NDR and PDR discovery tests) and for quick
-checks of DUT performance against the reference NDRs (NDR check tests) for
-specific configuration.
-
-TRex is installed and run on the TG compute node. The typical procedure is:
-
-- If the TRex is not already installed on TG, it is installed in the
- suite setup phase - see `TRex intallation`_.
-- TRex configuration is set in its configuration file
- ::
-
- /etc/trex_cfg.yaml
-
-- TRex is started in the background mode
- ::
-
- $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
-
-- There are traffic streams dynamically prepared for each test, based on traffic
- profiles. The traffic is sent and the statistics obtained using
- :command:`trex_stl_lib.api.STLClient`.
-
-**Measuring packet loss**
-
-- Create an instance of STLClient
-- Connect to the client
-- Add all streams
-- Clear statistics
-- Send the traffic for defined time
-- Get the statistics
-
-If there is a warm-up phase required, the traffic is sent also before test and
-the statistics are ignored.
-
-**Measuring latency**
-
-If measurement of latency is requested, two more packet streams are created (one
-for each direction) with TRex flow_stats parameter set to STLFlowLatencyStats. In
-that case, returned statistics will also include min/avg/max latency values.
-
-TCP/IP tests with WRK tool
---------------------------
-
-`WRK HTTP benchmarking tool <https://github.com/wg/wrk>`_ is used for
-experimental TCP/IP and HTTP tests of VPP TCP/IP stack and built-in
-static HTTP server. WRK has been chosen as it is capable of generating
-significant TCP/IP and HTTP loads by scaling number of threads across
-multi-core processors.
-
-This in turn enables quite high scale benchmarking of the main TCP/IP
-and HTTP service including HTTP TCP/IP Connections-Per-Second (CPS),
-HTTP Requests-Per-Second and HTTP Bandwidth Throughput.
-
-The initial tests are designed as follows:
-
-- HTTP and TCP/IP Connections-Per-Second (CPS)
-
- - WRK configured to use 8 threads across 8 cores, 1 thread per core.
- - Maximum of 50 concurrent connections across all WRK threads.
- - Timeout for server responses set to 5 seconds.
- - Test duration is 30 seconds.
- - Expected HTTP test sequence:
-
- - Single HTTP GET Request sent per open connection.
- - Connection close after valid HTTP reply.
- - Resulting flow sequence - 8 packets: >S,<S-A,>A,>Req,<Rep,>F,<F,> A.
-
-- HTTP Requests-Per-Second
-
- - WRK configured to use 8 threads across 8 cores, 1 thread per core.
- - Maximum of 50 concurrent connections across all WRK threads.
- - Timeout for server responses set to 5 seconds.
- - Test duration is 30 seconds.
- - Expected HTTP test sequence:
-
- - Multiple HTTP GET Requests sent in sequence per open connection.
- - Connection close after set test duration time.
- - Resulting flow sequence: >S,<S-A,>A,>Req[1],<Rep[1],..,>Req[n],<Rep[n],>F,<F,>A.
diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 10e128bcaf..e9c4b8d148 100644
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -7,6 +7,8 @@ please refer to :ref:`physical_testbeds`.
Logical Topologies
------------------
+.. _tested_logical_topologies:
+
CSIT VPP performance tests are executed on physical testbeds described
in :ref:`physical_testbeds`. Based on the packet path thru server SUTs,
three distinct logical topology types are used for VPP DUT data plane