diff options
Diffstat (limited to 'docs')
3 files changed, 79 insertions, 1 deletions
diff --git a/docs/report/introduction/methodology_data_plane_throughput/index.rst b/docs/report/introduction/methodology_data_plane_throughput/index.rst index f87283810f..71af4a9add 100644 --- a/docs/report/introduction/methodology_data_plane_throughput/index.rst +++ b/docs/report/introduction/methodology_data_plane_throughput/index.rst @@ -7,4 +7,4 @@ Data Plane Throughput methodology_mlrsearch_tests methodology_mrr_throughput methodology_plrsearch - + methodology_reconf diff --git a/docs/report/introduction/methodology_data_plane_throughput/methodology_reconf.rst b/docs/report/introduction/methodology_data_plane_throughput/methodology_reconf.rst new file mode 100644 index 0000000000..8922b32b22 --- /dev/null +++ b/docs/report/introduction/methodology_data_plane_throughput/methodology_reconf.rst @@ -0,0 +1,72 @@ +.. _reconf_tests: + +Reconf Tests +^^^^^^^^^^^^ + +Overview +~~~~~~~~ + +Reconf tests are designed to measure the impact of VPP re-configuration +on data plane traffic. +While VPP takes some measures against the traffic being +entirely stopped for a prolonged time, +the immediate forwarding rate varies during the re-configuration, +as some configurations steps need the active dataplane worker threads +to be stopped temporarily. + +As the usual methods of measuring throughput need multiple trial measurements +with somewhat long durations, and the re-configuration process can also be long, +finding an offered load which would result in zero loss +during the re-configuration process would be time-consuming. + +Instead, reconf tests find a througput value (lower bound for NDR) +without re-configuration, and then maintain that ofered load +during re-configuration. The measured loss count is then assumed to be caused +by the re-configuration process. The result published by reconf tests +is the effective blocked time, that is +the loss count divided by the offered load. + +Current Implementation +~~~~~~~~~~~~~~~~~~~~~~ + +Each reconf suite is based on a similar MLRsearch performance suite. + +MLRsearch parameters are changed to speed up the throughput discovery. +For example, PDR is not searched for, and final trial duration is shorter. + +The MLRsearch suite has to contain a configuration parameter +that can be scaled up, e.g. number of routes or number of service chains. +Currently, only increasing the scale is supported +as the re-configuration operation. In future, scale decrease +or other operations can be implemented. + +The traffic profile is not changed, so the traffic present is processed +only by the smaller scale configuration. The added routes / chains +are not targetted by the traffic. + +For the re-configuration, the same Robot Framework and Python libraries +are used, as were used in the initial configuration, with the exception +of the final calls that do not interact with VPP (e.g. starting +virtual machines) being skipped to reduce the test overall duration. + +Discussion +~~~~~~~~~~ + +Robot Framework introduces a certain overhead, which may affect timing +of individual VPP API calls, which in turn may affect +the number of packets lost. + +The exact calls executed may contain unnecessary info dumps, repeated commands, +or commands which change a value that do not need to be changed (e.g. MTU). +Thus, implementation details are affecting the results, even if their effect +on the corresponding MLRsearch suite is negligible. + +The lower bound for NDR is the only value safe to be used when zero packets lost +are expected without re-configuration. But different suites show different +"jitter" in that value. For some suites, the lower bound is not tight, +allowing full NIC buffers to drain quickly between worker pauses. +For other suites, lower bound for NDR still has quite a large probability +of non-zero packet loss even without re-configuration. + +But the results show very high effective blocked time, +so the two objections related to NDR lower bound are negligible in comparison. diff --git a/docs/report/vpp_performance_tests/nf_service_density/vnf_service_chains_reconf.rst b/docs/report/vpp_performance_tests/nf_service_density/vnf_service_chains_reconf.rst index 9c52ae7d17..66b1af15d3 100644 --- a/docs/report/vpp_performance_tests/nf_service_density/vnf_service_chains_reconf.rst +++ b/docs/report/vpp_performance_tests/nf_service_density/vnf_service_chains_reconf.rst @@ -33,6 +33,12 @@ Reconfiguration of VNF Service Chains ===================================== +See :ref:`reconf_tests` for methodology description of this test type. + +In each test, a single service chain is added, the re-configuration +contains all the steps the initial chains got, except the last step +(starting VMs) is skipped. + Additional information about graph data: #. **Graph Title**: describes tested packet path including VNF workload |