9 files changed, 0 insertions, 502 deletions
diff --git a/nsh_sfc_tests/func/__init__.robot b/nsh_sfc_tests/func/__init__.robot
deleted file mode 100644
index efebac383e..0000000000
--- a/nsh_sfc_tests/func/__init__.robot
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Library | resources.libraries.python.SFC.SetupSFCTest
-| Suite Setup | Run Keywords | Setup NSH SFC test | ${nodes}
-| ...         | AND          | Setup All DUTs | ${nodes}
-| ...         | AND          | Update All Interface Data On All Nodes | ${nodes}
diff --git a/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot b/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
deleted file mode 100644
index 9aa3a8692d..0000000000
--- a/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-inbound-func.robot
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/nsh_sfc/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
-| Suite Setup | Run Keywords
-| ... | Configure all DUTs before test | AND
-| ... | Configure all TGs for traffic script | AND
-| ... | Update All Interface Data On All Nodes | ${nodes} | AND
-| ... | Setup DUT nodes for 'Proxy Inbound' functional testing
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Reset VAT History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show VAT History On All DUTs | ${nodes} | AND
-| ... | Verify VPP PID in Teardown
-| Documentation | *NSH SFC Proxy Inbound test cases*
-| ...
-| ... | Test the SFC Proxy Inbound functional. DUT run the VPP with NSH
-| ... | SFC Plugin, TG send a VxLAN-GPE+NSH packet to the DUT,
-| ... | if the packet match the SFC Proxy inbound rules, the SFC Proxy will
-| ... | pop the VxLAN-GPE and NSH protocol, then encapsulate with the
-| ... | VxLAN protocol. DUT will loopback the packet to the TG.
-| ... | The TG will capture this VxLAN packet and check the packet
-| ... | field is correct.
-
-*** Test Cases ***
-| TC01: NSH SFC Proxy Inbound functional test with 152B frame size
-| | [Documentation]
-| | ... | Make TG send 152 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${152}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
-
-| TC02: NSH SFC Proxy Inbound functional test with 256B frame size
-| | [Documentation]
-| | ... | Make TG send 256 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${256}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
-
-| TC03: NSH SFC Proxy Inbound functional test with 512B frame size
-| | [Documentation]
-| | ... | Make TG send 512 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${512}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
-
-| TC04: NSH SFC Proxy Inbound functional test with 1024B frame size
-| | [Documentation]
-| | ... | Make TG send 1024 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1024}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
-
-| TC05: NSH SFC Proxy Inbound functional test with 1280B frame size
-| | [Documentation]
-| | ... | Make TG send 1280 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1280}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
-
-| TC06: NSH SFC Proxy Inbound functional test with 1518B frame size
-| | [Documentation]
-| | ... | Make TG send 1518 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Inbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1518}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Inbound" test
diff --git a/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot b/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
deleted file mode 100644
index db9c08d1b4..0000000000
--- a/nsh_sfc_tests/func/proxy/eth2p-ethip4-nsh-proxy-outbound-func.robot
+++ /dev/null
@@ -1,86 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/nsh_sfc/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
-| Suite Setup | Run Keywords
-| ... | Configure all DUTs before test | AND
-| ... | Configure all TGs for traffic script | AND
-| ... | Update All Interface Data On All Nodes | ${nodes} | AND
-| ... | Setup DUT nodes for 'Proxy Outbound' functional testing
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Reset VAT History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show VAT History On All DUTs | ${nodes} | AND
-| ... | Verify VPP PID in Teardown
-| Documentation | *NSH SFC Proxy Outbound test cases*
-| ...
-| ... | Test the SFC Proxy Outbound functional. DUT run the VPP with NSH
-| ... | SFC Plugin, TG send a VxLAN packet to the DUT,
-| ... | if the packet match the SFC Proxy outbound rules, the SFC Proxy will
-| ... | push the NSH protocol, then encapsulate with the VxLAN-GPE protocol.
-| ... | DUT will loopback the packet to the TG.
-| ... | The TG will capture this VxLAN-GPE+NSH packet and check the packet
-| ... | field is correct.
-
-
-*** Test Cases ***
-| TC01: NSH SFC Proxy Outbound functional test with 128B frame size
-| | [Documentation]
-| | ... | Make TG send 128 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${128}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
-
-| TC02: NSH SFC Proxy Outbound functional test with 256B frame size
-| | [Documentation]
-| | ... | Make TG send 256 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${256}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
-
-| TC03: NSH SFC Proxy Outbound functional test with 512B frame size
-| | [Documentation]
-| | ... | Make TG send 512 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${512}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
-
-| TC04: NSH SFC Proxy Outbound functional test with 1024B frame size
-| | [Documentation]
-| | ... | Make TG send 1024 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1024}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
-
-| TC05: NSH SFC Proxy Outbound functional test with 1280B frame size
-| | [Documentation]
-| | ... | Make TG send 1280 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1280}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
-
-| TC06: NSH SFC Proxy Outbound functional test with 1518B frame size
-| | [Documentation]
-| | ... | Make TG send 1518 Bytes VxLAN packet to DUT ingress interface.\
-| | ... | Make TG verify SFC Proxy Outbound functional is correct.
-| | ${frame_size}= | Set Variable | ${1518}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "Proxy Outbound" test
diff --git a/nsh_sfc_tests/func/sff/eth2p-ethip4-sfc-sff-func.robot b/nsh_sfc_tests/func/sff/eth2p-ethip4-sfc-sff-func.robot
deleted file mode 100644
index 28aa4cd4d5..0000000000
--- a/nsh_sfc_tests/func/sff/eth2p-ethip4-sfc-sff-func.robot
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/nsh_sfc/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | FUNCTEST
-| Suite Setup | Run Keywords
-| ... | Configure all DUTs before test | AND
-| ... | Configure all TGs for traffic script | AND
-| ... | Update All Interface Data On All Nodes | ${nodes} | AND
-| ... | Setup DUT nodes for 'SFF' functional testing
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Reset VAT History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show VAT History On All DUTs | ${nodes} | AND
-| ... | Verify VPP PID in Teardown
-| Documentation | *NSH SFC SFF test cases*
-| ...
-| ... | Test the SFC Service Function Forward functional. DUT run the VPP
-| ... | with NSH SFC Plugin, TG send a VxLAN-GPE+NSH packet to the DUT,
-| ... | if the packet match the SFC SFF rules, the SFC SFF will
-| ... | swap the VxLAN-GPE and NSH protocol.
-| ... | DUT will loopback the packet to the TG.
-| ... | The TG will capture this VxLAN-GPE+NSH packet and check the packet
-| ... | field is correct.
-
-*** Test Cases ***
-| TC01: NSH SFC SFF functional test with 152B frame size
-| | [Documentation]
-| | ... | Make TG send 152 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${152}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
-
-| TC02: NSH SFC SFF functional test with 256B frame size
-| | [Documentation]
-| | ... | Make TG send 256 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${256}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
-
-| TC03: NSH SFC SFF functional test with 512B frame size
-| | [Documentation]
-| | ... | Make TG send 512 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${512}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
-
-| TC04: NSH SFC SFF functional test with 1024B frame size
-| | [Documentation]
-| | ... | Make TG send 1024 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${1024}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
-
-| TC05: NSH SFC SFF functional test with 1280B frame size
-| | [Documentation]
-| | ... | Make TG send 1280 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${1280}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
-
-| TC06: NSH SFC SFF functional test with 1518B frame size
-| | [Documentation]
-| | ... | Make TG send 1518 Bytes VxLAN-GPE+NSH packet to DUT ingress interface.\
-| | ... | Make TG verify SFC SFF functional is correct.
-| | ${frame_size}= | Set Variable | ${1518}
-| | Node "${src_node}" interface "${src_port}" send "${frame_size}" Bytes packet to node "${dst_node}" interface "${dst_port}" for "SFF" test
diff --git a/nsh_sfc_tests/sfc_scripts/install_sfc.sh b/nsh_sfc_tests/sfc_scripts/install_sfc.sh
deleted file mode 100755
index 265d4c153a..0000000000
--- a/nsh_sfc_tests/sfc_scripts/install_sfc.sh
+++ /dev/null
@@ -1,114 +0,0 @@
-#!/bin/bash
-
-set -x
-
-ROOTDIR=/tmp/openvpp-testing
-PWDDIR=$(pwd)
-
-if_name1=$1
-if_name2=$2
-
-VPP_VERSION=`cat ${ROOTDIR}/NSH_SFC_VER | grep VPP | awk -F'= ' '{print $2}'`
-NSH_SFC_VERSION=`cat ${ROOTDIR}/NSH_SFC_VER | grep NSH_SFC | awk -F'= ' '{print $2}'`
-
-VPP_CODE_DIR=${ROOTDIR}/vpp_codes
-NSH_SFC_CODE_DIR=${ROOTDIR}/nsh_sfc_codes
-
-#at first, we need to stop the vpp service if have
-sudo service vpp stop
-
-#uninstall the vpp and nsh sfc plugin
-#and git clone the vpp and nsh sfc plugin source codes
-#then compile and install them in the dut nodes.
-nsh_need_install=0
-sudo dpkg -l vpp-nsh-plugin >/dev/null 2>&1
-if [ $? -eq 0 ]; then
-    nsh_plugin_version=`dpkg -s vpp-nsh-plugin | grep Version | awk -F' ' '{print $2}'`
-    if [ "${nsh_plugin_version}" \< "${NSH_SFC_VERSION}" ]; then
-        sudo dpkg -P vpp-nsh-plugin vpp-nsh-plugin-dbg vpp-nsh-plugin-dev >/dev/null 2>&1
-        test $? -eq 0 || exit 1
-        nsh_need_install=1
-    fi
-else
-    nsh_need_install=1
-fi
-
-vpp_need_install=0
-sudo dpkg -l vpp >/dev/null 2>&1
-if [ $? -eq 0 ]; then
-    vpp_version=`dpkg -s vpp | grep Version | awk -F' ' '{print $2}'`
-    if [ "${vpp_version}" \< "${VPP_VERSION}" ]; then
-        sudo dpkg -P vpp vpp-dbg vpp-dev vpp-dpdk-dev vpp-dpdk-dkms vpp-lib \
-                     vpp-plugins vpp-python-api >/dev/null 2>&1
-        test $? -eq 0 || exit 1
-        vpp_need_install=1
-    fi
-else
-    vpp_need_install=1
-fi
-
-sleep 5
-
-##begin to clone the vpp source code
-if [ ${vpp_need_install} -eq 1 ]; then
-    sudo rm -rf ${VPP_CODE_DIR}
-    sudo mkdir -p ${VPP_CODE_DIR}
-    cd ${VPP_CODE_DIR}
-    git clone -b v${VPP_VERSION} https://gerrit.fd.io/r/vpp
-
-    #compile the vpp code
-    cd ./vpp/build-root/
-    make distclean
-    ./bootstrap.sh
-    make V=0 PLATFORM=vpp TAG=vpp install-deb
-
-    #after that, install vpp
-    sudo dpkg -i *.deb
-    cd ${PWDDIR}
-fi
-
-##begin to clone the nsh sfc source code
-if [ ${nsh_need_install} -eq 1 ]; then
-    sudo rm -rf ${NSH_SFC_CODE_DIR}
-    sudo mkdir -p ${NSH_SFC_CODE_DIR}
-    cd ${NSH_SFC_CODE_DIR}
-    git clone -b v${NSH_SFC_VERSION} https://gerrit.fd.io/r/nsh_sfc
-
-    #compile the nsh sfc code
-    cd ./nsh_sfc/nsh-plugin/
-    sudo rm -rf build
-    sudo ./build.sh
-
-    #after that, install the nsh sfc plugin
-    cd ./packaging/
-    sudo dpkg -i *.deb
-    cd ${PWDDIR}
-fi
-
-#check and setup the hugepages
-SYS_HUGEPAGE=$(cat /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages)
-if [ ${SYS_HUGEPAGE} -lt 1024 ]; then
-    MOUNT=$(mount | grep /mnt/huge)
-    while [ "${MOUNT}" != "" ]
-    do
-        sudo umount /mnt/huge
-        sleep 1
-        MOUNT=$(mount | grep /mnt/huge)
-    done
-
-    echo 2048 | sudo tee /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
-    echo 2048 | sudo tee /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
-
-    sudo mkdir -p /mnt/huge
-    sudo mount -t hugetlbfs nodev /mnt/huge/
-    test $? -eq 0 || exit 1
-fi
-
-#check and set the max map count
-SYS_MAP=$(cat /proc/sys/vm/max_map_count)
-if [ ${SYS_MAP} -lt 200000 ]; then
-    echo 200000 | sudo tee /proc/sys/vm/max_map_count
-fi
-
-#after all, we can start the vpp service now
-sudo service vpp start
diff --git a/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_inbound.sh b/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_inbound.sh
deleted file mode 100755
index 453de3f8de..0000000000
--- a/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_inbound.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-set -x
-
-sudo service vpp restart
-sleep 5
-
-sudo vppctl set int state $1 up
-sleep 10
-sudo vppctl set int ip table $1 0
-sudo vppctl set int ip address $1 192.168.50.76/24
-
-sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.72 vni 9 next-nsh encap-vrf-id 0 decap-vrf-id 0
-sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
-
-sudo vppctl create vxlan tunnel src 192.168.50.76 dst 192.168.50.71 vni 1 encap-vrf-id 0 decap-next node nsh-proxy
-sudo vppctl set int l2 bridge vxlan_tunnel0 1 1
-
-sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-
-sleep 2
-vxlan_gpe_index=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
-vxlan_index=`sudo vppctl sh int | grep "vxlan_tunnel0" | awk '{print $2}'`
-sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 255 nsh_action pop encap-vxlan4-intf ${vxlan_index}
-sudo vppctl create nsh map nsp 185 nsi 254 mapped-nsp 185 mapped-nsi 254 nsh_action push encap-vxlan-gpe-intf ${vxlan_gpe_index}
-
-sudo vppctl ip route add 192.168.50.72/24 via 192.168.50.76
-sudo vppctl set ip arp $1 192.168.50.71 $2
-sudo vppctl set ip arp $1 192.168.50.72 $2
-
-sudo vppctl trace add dpdk-input 100
diff --git a/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_outbound.sh b/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_outbound.sh
deleted file mode 100755
index 304ed30cda..0000000000
--- a/nsh_sfc_tests/sfc_scripts/set_nsh_proxy_outbound.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-set -x
-
-sudo service vpp restart
-sleep 5
-
-sudo vppctl set int state $1 up
-sleep 10
-sudo vppctl set int ip table $1 0
-sudo vppctl set int ip address $1 192.168.50.76/24
-
-sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.71 vni 9 next-nsh encap-vrf-id 0 decap-vrf-id 0
-sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
-
-sudo vppctl create vxlan tunnel src 192.168.50.76 dst 192.168.50.72 vni 1 encap-vrf-id 0 decap-next node nsh-proxy
-sudo vppctl set int l2 bridge vxlan_tunnel0 1 1
-
-sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-
-sleep 2
-vxlan_gpe_index=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
-vxlan_index=`sudo vppctl sh int | grep "vxlan_tunnel0" | awk '{print $2}'`
-sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 255 nsh_action pop encap-vxlan4-intf ${vxlan_index}
-sudo vppctl create nsh map nsp 185 nsi 254 mapped-nsp 185 mapped-nsi 254 nsh_action push encap-vxlan-gpe-intf ${vxlan_gpe_index}
-
-sudo vppctl ip route add 192.168.50.72/24 via 192.168.50.76
-sudo vppctl set ip arp $1 192.168.50.71 $2
-sudo vppctl set ip arp $1 192.168.50.72 $2
-
-sudo vppctl trace add dpdk-input 100
diff --git a/nsh_sfc_tests/sfc_scripts/set_sfc_sff.sh b/nsh_sfc_tests/sfc_scripts/set_sfc_sff.sh
deleted file mode 100755
index 03e2f0ade7..0000000000
--- a/nsh_sfc_tests/sfc_scripts/set_sfc_sff.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-set -x
-
-sudo service vpp restart
-sleep 5
-
-sudo vppctl set int state $1 up
-sleep 10
-sudo vppctl set int ip table $1 7
-sudo vppctl set int ip address $1 192.168.50.76/24
-
-sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.71 vni 9 next-nsh encap-vrf-id 7 decap-vrf-id 7
-sudo vppctl set int l2 bridge vxlan_gpe_tunnel0 1 1
-
-sudo vppctl create vxlan-gpe tunnel local 192.168.50.76 remote 192.168.50.72 vni 10 next-nsh encap-vrf-id 7 decap-vrf-id 7
-sudo vppctl set int l2 bridge vxlan_gpe_tunnel1 1 1
-
-sudo vppctl create nsh entry nsp 185 nsi 255 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-sudo vppctl create nsh entry nsp 185 nsi 254 md-type 1 c1 3232248395 c2 9 c3 3232248392 c4 50336437 next-ethernet
-
-sleep 2
-vxlan_gpe_index0=`sudo vppctl sh int | grep "vxlan_gpe_tunnel0" | awk '{print $2}'`
-vxlan_gpe_index1=`sudo vppctl sh int | grep "vxlan_gpe_tunnel1" | awk '{print $2}'`
-sudo vppctl create nsh map nsp 185 nsi 255 mapped-nsp 185 mapped-nsi 254 nsh_action swap encap-vxlan-gpe-intf ${vxlan_gpe_index0}
-
-sudo vppctl ip route add 192.168.50.71/32 via 192.168.50.76 $1
-sudo vppctl ip route add 192.168.50.72/32 via 192.168.50.76 $1
-sudo vppctl set ip arp fib-id 7 $1 192.168.50.71 $2
-sudo vppctl set ip arp fib-id 7 $1 192.168.50.72 $2
-
-sudo vppctl trace add dpdk-input 100
diff --git a/nsh_sfc_tests/sfc_scripts/start_tcpdump.sh b/nsh_sfc_tests/sfc_scripts/start_tcpdump.sh
deleted file mode 100755
index 46f8217e26..0000000000
--- a/nsh_sfc_tests/sfc_scripts/start_tcpdump.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-
-ROOTDIR=/tmp/openvpp-testing
-PWDDIR=$(pwd)
-
-cd ${ROOTDIR}/nsh_sfc_tests/sfc_scripts/
-sudo rm -f temp_packet.pcap
-
-sudo /usr/sbin/tcpdump -i $1 -c 1 -w temp_packet.pcap dst host $2 &
-
-if [ ! $? -eq 0 ]; then
-    echo "Start the tcpdump failed!!!"
-    exit 1
-fi
-
-cd ${PWDDIR}