diff options
Diffstat (limited to 'resources/libraries/bash/function/device.sh')
| -rw-r--r-- | resources/libraries/bash/function/device.sh | 185 |
1 files changed, 137 insertions, 48 deletions
diff --git a/resources/libraries/bash/function/device.sh b/resources/libraries/bash/function/device.sh index 868fdb1342..8bfb2e458c 100644 --- a/resources/libraries/bash/function/device.sh +++ b/resources/libraries/bash/function/device.sh @@ -78,7 +78,7 @@ function bind_interfaces_to_containers () { sudo ip link set ${NETDEV} netns ${DCR_CPIDS[dut1]} || { die "Moving interface to ${DCR_CPIDS[dut1]} namespace failed!" } - docker exec "${DCR_UUIDS[dut1]}" ${cmd} || { + docker exec "${DCR_UUIDS[dut1]}" ${cmd} || { die "Linking PCI address in container failed!" } done @@ -245,16 +245,20 @@ function get_available_interfaces () { # - DUT1_PCIDEVS - List of PCI addresses allocated to DUT1 container. # - DUT1_NETMACS - List of MAC addresses allocated to DUT1 container. # - DUT1_DRIVERS - List of interface drivers to DUT1 container. + # - DUT1_VLANS - List of interface vlans to TG container. + # - DUT1_MODEL - List of interface models to TG container. # - TG_NETDEVS - List of network devices allocated to TG container. # - TG_PCIDEVS - List of PCI addresses allocated to TG container. # - TG_NETMACS - List of MAC addresses allocated to TG container. # - TG_DRIVERS - List of interface drivers to TG container. + # - TG_VLANS - List of interface vlans to TG container. + # - TG_MODEL - List of interface models to TG container. set -exuo pipefail - # Following code is specifing VFs ID based on nodeness and flavor. + # Following code is specifying VFs ID based on nodeness and flavor. # As there is great variability in hardware configuration outside LF, - # from bootstrap architecure point of view these are considered as flavors. + # from bootstrap architecture point of view these are considered as flavors. # Anyone can override flavor for its own machine and add condition here. # See http://pci-ids.ucw.cz/v2.2/pci.ids for more info. case_text="${1}_${2}" @@ -262,9 +266,10 @@ function get_available_interfaces () { "1n_skx") # Add Intel Corporation XL710/X710 Virtual Function to the # whitelist. - pci_id="0x154c" - tg_netdev=(ens1 enp24) - dut1_netdev=(ens5 enp59) + pci_id="0x154c\|0x1889" + tg_netdev=(ens1 enp134) + dut1_netdev=(ens5 enp175) + ports_per_nic=2 ;; "1n_tx2") # Add Intel Corporation XL710/X710 Virtual Function to the @@ -272,6 +277,7 @@ function get_available_interfaces () { pci_id="0x154c" tg_netdev=(enp5) dut1_netdev=(enp145) + ports_per_nic=2 ;; "1n_vbox") # Add Intel Corporation 82545EM Gigabit Ethernet Controller to the @@ -279,43 +285,47 @@ function get_available_interfaces () { pci_id="0x100f" tg_netdev=(enp0s8 enp0s9) dut1_netdev=(enp0s16 enp0s17) + ports_per_nic=1 ;; *) die "Unknown specification: ${case_text}!" esac - device_count=2 - # TG side of connections. TG_NETDEVS=() TG_PCIDEVS=() TG_NETMACS=() TG_DRIVERS=() TG_VLANS=() + TG_MODEL=() # DUT1 side of connections. DUT1_NETDEVS=() DUT1_PCIDEVS=() DUT1_NETMACS=() DUT1_DRIVERS=() DUT1_VLANS=() + DUT1_MODEL=() # Find the first ${device_count} number of available TG Linux network # VF device names. Only allowed VF PCI IDs are filtered. for netdev in ${tg_netdev[@]} do + ports=0 for netdev_path in $(grep -l "${pci_id}" \ /sys/class/net/${netdev}*/device/device \ 2> /dev/null) do - if [[ ${#TG_NETDEVS[@]} -lt ${device_count} ]]; then + if [[ ${ports} -lt ${ports_per_nic} ]]; then tg_netdev_name=$(dirname ${netdev_path}) tg_netdev_name=$(dirname ${tg_netdev_name}) TG_NETDEVS+=($(basename ${tg_netdev_name})) + ((ports++)) else break fi done - if [[ ${#TG_NETDEVS[@]} -eq ${device_count} ]]; then + ports_per_device=$((${ports_per_nic}*${#tg_netdev[@]})) + if [[ ${#TG_NETDEVS[@]} -eq ${ports_per_device} ]]; then break fi done @@ -339,29 +349,30 @@ function get_available_interfaces () { get_mac_addr get_krn_driver get_vlan_filter + get_csit_model TG_PCIDEVS+=(${PCI_ADDR}) TG_NETMACS+=(${MAC_ADDR}) TG_DRIVERS+=(${KRN_DRIVER}) TG_VLANS+=(${VLAN_ID}) + TG_MODELS+=(${MODEL}) done for NETDEV in "${DUT1_NETDEVS[@]}"; do get_pci_addr get_mac_addr get_krn_driver get_vlan_filter + get_csit_model DUT1_PCIDEVS+=(${PCI_ADDR}) DUT1_NETMACS+=(${MAC_ADDR}) DUT1_DRIVERS+=(${KRN_DRIVER}) DUT1_VLANS+=(${VLAN_ID}) + DUT1_MODELS+=(${MODEL}) done # We need at least two interfaces for TG/DUT1 for building topology. - if [ "${#TG_NETDEVS[@]}" -ne 2 ] || [ "${#DUT1_NETDEVS[@]}" -ne 2 ]; then + if [ "${#TG_NETDEVS[@]}" -lt 2 ] || [ "${#DUT1_NETDEVS[@]}" -lt 2 ]; then die "Not enough linux network interfaces found!" fi - if [ "${#TG_PCIDEVS[@]}" -ne 2 ] || [ "${#DUT1_PCIDEVS[@]}" -ne 2 ]; then - die "Not enough pci interfaces found!" - fi } @@ -402,6 +413,35 @@ function get_mac_addr () { } +function get_csit_model () { + + # Get CSIT model name from linux network device name. + # + # Variables read: + # - NETDEV - Linux network device name. + # Variables set: + # - MODEL - CSIT model name of network device. + + set -exuo pipefail + + if [ -d /sys/class/net/${NETDEV}/device ]; then + ID="$(</sys/class/net/${NETDEV}/device/device)" || { + die "Failed to get device id of linux network interface!" + } + case "${ID}" in + "0x1592"|"0x1889") + MODEL="Intel-E810CQ" + ;; + "0x1572"|"0x154c") + MODEL="Intel-X710" + ;; + "*") + MODEL="virtual" + esac + fi +} + + function get_pci_addr () { # Get PCI address in <domain>:<bus:<device>.<func> format from linux network @@ -461,6 +501,55 @@ function installed () { } +function parse_env_variables () { + + # Parse environment variables. + # + # Variables read, set or exported: Multiple, + # see the code for the current list. + + set -exuo pipefail + + IFS=@ read -a TG_NETMACS <<< "${CSIT_TG_INTERFACES_PORT_MAC}" + IFS=@ read -a TG_PCIDEVS <<< "${CSIT_TG_INTERFACES_PORT_PCI}" + IFS=@ read -a TG_DRIVERS <<< "${CSIT_TG_INTERFACES_PORT_DRV}" + IFS=@ read -a TG_VLANS <<< "${CSIT_TG_INTERFACES_PORT_VLAN}" + IFS=@ read -a TG_MODELS <<< "${CSIT_TG_INTERFACES_PORT_MODEL}" + IFS=@ read -a DUT1_NETMACS <<< "${CSIT_DUT1_INTERFACES_PORT_MAC}" + IFS=@ read -a DUT1_PCIDEVS <<< "${CSIT_DUT1_INTERFACES_PORT_PCI}" + IFS=@ read -a DUT1_DRIVERS <<< "${CSIT_DUT1_INTERFACES_PORT_DRV}" + IFS=@ read -a DUT1_VLANS <<< "${CSIT_DUT1_INTERFACES_PORT_VLAN}" + IFS=@ read -a DUT1_MODELS <<< "${CSIT_DUT1_INTERFACES_PORT_MODEL}" + + for port in $(seq "${#TG_NETMACS[*]}"); do + CSIT_TG_INTERFACES+=$(cat << EOF + port$((port-1)): + mac_address: "${TG_NETMACS[$((port-1))]}" + pci_address: "${TG_PCIDEVS[$((port-1))]}" + link: "link$((port-1))" + model: "${TG_MODELS[$((port-1))]}" + driver: "${TG_DRIVERS[$((port-1))]}" + vlan: ${TG_VLANS[$((port-1))]} +EOF + ) + CSIT_TG_INTERFACES+=$'\n' + done + for port in $(seq "${#DUT1_NETMACS[*]}"); do + CSIT_DUT1_INTERFACES+=$(cat << EOF + port$((port-1)): + mac_address: "${DUT1_NETMACS[$((port-1))]}" + pci_address: "${DUT1_PCIDEVS[$((port-1))]}" + link: "link$((port-1))" + model: "${DUT1_MODELS[$((port-1))]}" + driver: "${DUT1_DRIVERS[$((port-1))]}" + vlan: ${DUT1_VLANS[$((port-1))]} +EOF + ) + CSIT_DUT1_INTERFACES+=$'\n' + done +} + + function print_env_variables () { # Get environment variables prefixed by CSIT_. @@ -479,7 +568,6 @@ function read_env_variables () { # - ${@} - Variables passed as an argument. # Variables read, set or exported: Multiple, # see the code for the current list. - # TODO: Do we need to list them and their meanings? set -exuo pipefail @@ -489,18 +577,17 @@ function read_env_variables () { declare -gA DCR_UUIDS DCR_UUIDS+=([tg]="${CSIT_TG_UUID}") DCR_UUIDS+=([dut1]="${CSIT_DUT1_UUID}") - TG_PCIDEVS=("${CSIT_TG_INTERFACES_PORT1_PCI}") - TG_DRIVERS=("${CSIT_TG_INTERFACES_PORT1_DRV}") - TG_VLANS+=("${CSIT_TG_INTERFACES_PORT1_VLAN}") - TG_PCIDEVS+=("${CSIT_TG_INTERFACES_PORT2_PCI}") - TG_DRIVERS+=("${CSIT_TG_INTERFACES_PORT2_DRV}") - TG_VLANS+=("${CSIT_TG_INTERFACES_PORT2_VLAN}") - DUT1_PCIDEVS=("${CSIT_DUT1_INTERFACES_PORT1_PCI}") - DUT1_DRIVERS=("${CSIT_DUT1_INTERFACES_PORT1_DRV}") - DUT1_VLANS+=("${CSIT_DUT1_INTERFACES_PORT1_VLAN}") - DUT1_PCIDEVS+=("${CSIT_DUT1_INTERFACES_PORT2_PCI}") - DUT1_DRIVERS+=("${CSIT_DUT1_INTERFACES_PORT2_DRV}") - DUT1_VLANS+=("${CSIT_DUT1_INTERFACES_PORT2_VLAN}") + + IFS=@ read -a TG_NETMACS <<< "${CSIT_TG_INTERFACES_PORT_MAC}" + IFS=@ read -a TG_PCIDEVS <<< "${CSIT_TG_INTERFACES_PORT_PCI}" + IFS=@ read -a TG_DRIVERS <<< "${CSIT_TG_INTERFACES_PORT_DRV}" + IFS=@ read -a TG_VLANS <<< "${CSIT_TG_INTERFACES_PORT_VLAN}" + IFS=@ read -a TG_MODELS <<< "${CSIT_TG_INTERFACES_PORT_MODEL}" + IFS=@ read -a DUT1_NETMACS <<< "${CSIT_DUT1_INTERFACES_PORT_MAC}" + IFS=@ read -a DUT1_PCIDEVS <<< "${CSIT_DUT1_INTERFACES_PORT_PCI}" + IFS=@ read -a DUT1_DRIVERS <<< "${CSIT_DUT1_INTERFACES_PORT_DRV}" + IFS=@ read -a DUT1_VLANS <<< "${CSIT_DUT1_INTERFACES_PORT_VLAN}" + IFS=@ read -a DUT1_MODELS <<< "${CSIT_DUT1_INTERFACES_PORT_MODEL}" } @@ -511,13 +598,18 @@ function set_env_variables () { # Variables read: # - DCR_UUIDS - Docker Container UUIDs. # - DCR_PORTS - Docker Container's SSH ports. - # - DUT1_NETMACS - List of network devices MAC addresses of DUT1 container. - # - DUT1_PCIDEVS - List of PCI addresses of devices of DUT1 container. + # - DUT1_NETDEVS - List of network devices allocated to DUT1 container. + # - DUT1_PCIDEVS - List of PCI addresses allocated to DUT1 container. + # - DUT1_NETMACS - List of MAC addresses allocated to DUT1 container. # - DUT1_DRIVERS - List of interface drivers to DUT1 container. - # - TG_NETMACS - List of network devices MAC addresses of TG container. - # - TG_PCIDEVS - List of PCI addresses of devices of TG container. + # - DUT1_VLANS - List of interface vlans to TG container. + # - DUT1_MODEL - List of interface models to TG container. + # - TG_NETDEVS - List of network devices allocated to TG container. + # - TG_PCIDEVS - List of PCI addresses allocated to TG container. + # - TG_NETMACS - List of MAC addresses allocated to TG container. # - TG_DRIVERS - List of interface drivers to TG container. - # Variables set: TODO. + # - TG_VLANS - List of interface vlans to TG container. + # - TG_MODEL - List of interface models to TG container. set -exuo pipefail @@ -538,23 +630,20 @@ function set_env_variables () { CSIT_DUT1_ARCH="$(uname -i)" || { die "Reading machine architecture failed!" } - CSIT_TG_INTERFACES_PORT1_MAC="${TG_NETMACS[0]}" - CSIT_TG_INTERFACES_PORT1_PCI="${TG_PCIDEVS[0]}" - CSIT_TG_INTERFACES_PORT1_DRV="${TG_DRIVERS[0]}" - CSIT_TG_INTERFACES_PORT1_VLAN="${TG_VLANS[0]}" - CSIT_TG_INTERFACES_PORT2_MAC="${TG_NETMACS[1]}" - CSIT_TG_INTERFACES_PORT2_PCI="${TG_PCIDEVS[1]}" - CSIT_TG_INTERFACES_PORT2_DRV="${TG_DRIVERS[1]}" - CSIT_TG_INTERFACES_PORT2_VLAN="${TG_VLANS[1]}" - CSIT_DUT1_INTERFACES_PORT1_MAC="${DUT1_NETMACS[0]}" - CSIT_DUT1_INTERFACES_PORT1_PCI="${DUT1_PCIDEVS[0]}" - CSIT_DUT1_INTERFACES_PORT1_DRV="${DUT1_DRIVERS[0]}" - CSIT_DUT1_INTERFACES_PORT1_VLAN="${DUT1_VLANS[0]}" - CSIT_DUT1_INTERFACES_PORT2_MAC="${DUT1_NETMACS[1]}" - CSIT_DUT1_INTERFACES_PORT2_PCI="${DUT1_PCIDEVS[1]}" - CSIT_DUT1_INTERFACES_PORT2_DRV="${DUT1_DRIVERS[1]}" - CSIT_DUT1_INTERFACES_PORT2_VLAN="${DUT1_VLANS[1]}" + OIFS="$IFS" IFS=@ + set -a + CSIT_TG_INTERFACES_PORT_MAC="${TG_NETMACS[*]}" + CSIT_TG_INTERFACES_PORT_PCI="${TG_PCIDEVS[*]}" + CSIT_TG_INTERFACES_PORT_DRV="${TG_DRIVERS[*]}" + CSIT_TG_INTERFACES_PORT_VLAN="${TG_VLANS[*]}" + CSIT_TG_INTERFACES_PORT_MODEL="${TG_MODELS[*]}" + CSIT_DUT1_INTERFACES_PORT_MAC="${DUT1_NETMACS[*]}" + CSIT_DUT1_INTERFACES_PORT_PCI="${DUT1_PCIDEVS[*]}" + CSIT_DUT1_INTERFACES_PORT_DRV="${DUT1_DRIVERS[*]}" + CSIT_DUT1_INTERFACES_PORT_VLAN="${DUT1_VLANS[*]}" + CSIT_DUT1_INTERFACES_PORT_MODEL="${DUT1_MODELS[*]}" set +a + IFS="$OIFS" } |