aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python/honeycomb
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/python/honeycomb')
-rw-r--r--resources/libraries/python/honeycomb/HoneycombSetup.py15
-rw-r--r--resources/libraries/python/honeycomb/HoneycombUtil.py2
-rw-r--r--resources/libraries/python/honeycomb/IPv6Management.py147
3 files changed, 148 insertions, 16 deletions
diff --git a/resources/libraries/python/honeycomb/HoneycombSetup.py b/resources/libraries/python/honeycomb/HoneycombSetup.py
index 975a36c753..d10a5ccb4e 100644
--- a/resources/libraries/python/honeycomb/HoneycombSetup.py
+++ b/resources/libraries/python/honeycomb/HoneycombSetup.py
@@ -637,21 +637,6 @@ class HoneycombSetup(object):
logger.info("ODL client service stopped.")
- @staticmethod
- def stop_vpp_service(node):
- """Stop VPP service on the specified node.
-
- :param node: VPP node.
- :type node: dict
- :raises RuntimeError: If VPP fails to stop.
- """
-
- ssh = SSH()
- ssh.connect(node)
- cmd = "service vpp stop"
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=80)
- if int(ret_code) != 0:
- logger.debug("VPP service refused to shut down.")
class HoneycombStartupConfig(object):
diff --git a/resources/libraries/python/honeycomb/HoneycombUtil.py b/resources/libraries/python/honeycomb/HoneycombUtil.py
index 86feb78d94..b7338d3ed8 100644
--- a/resources/libraries/python/honeycomb/HoneycombUtil.py
+++ b/resources/libraries/python/honeycomb/HoneycombUtil.py
@@ -448,7 +448,7 @@ class HoneycombUtil(object):
if not perf:
cmd = "cp /tmp/honeycomb.log /scratch/"
- ssh.exec_command_sudo(cmd)
+ ssh.exec_command_sudo(cmd, timeout=60)
else:
ssh.scp(
".",
diff --git a/resources/libraries/python/honeycomb/IPv6Management.py b/resources/libraries/python/honeycomb/IPv6Management.py
new file mode 100644
index 0000000000..deec041103
--- /dev/null
+++ b/resources/libraries/python/honeycomb/IPv6Management.py
@@ -0,0 +1,147 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords used for setup and testing of Honeycomb's control-plane interface
+using IPv6.
+"""
+
+from resources.libraries.python.ssh import SSH
+
+
+class IPv6Management(object):
+ """Utilities for managing IPv6 contol-plane interfaces."""
+
+ def __init__(self):
+ pass
+
+ @staticmethod
+ def get_interface_name_by_mac(node, mac):
+ """Get the name of an interface using its MAC address.
+
+ :param node: Node in topology.
+ :param mac: MAC address.
+ :type node: dict
+ :type mac: str
+ :returns: Name of the interface.
+ :rtype: str
+ :raises RuntimeError: If no interface is found.
+ """
+
+ cmd = " | ".join([
+ "fgrep -ls '{0}' /sys/class/net/*/address".format(mac),
+ "awk -F '/' '{print $5}'"
+ ])
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, stdout, _ = ssh.exec_command(cmd)
+
+ if ret_code == 0:
+ return stdout.strip()
+ else:
+ raise RuntimeError("No interface found using the specified MAC "
+ "address.")
+
+ @staticmethod
+ def clear_interface_configuration(node, interface):
+ """Remove all configured IP addresses from the specified interface
+ and set it into down state.
+
+ :param node: Node in topology.
+ :param interface: Name of an interface on the node.
+ :type node: dict
+ :type interface: str
+ :raises RuntimeError: If the configuration could not be cleared.
+ """
+
+ cmd = " && ".join([
+ "sudo ip addr flush dev {interface}".format(interface=interface),
+ "sudo ip link set dev {interface} down".format(interface=interface)
+ ])
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not clear interface configuration.")
+
+ @staticmethod
+ def set_management_interface_address(node, interface, address, prefix):
+ """Configure an IP address on the specified interface.
+
+ :param node: Node in topology.
+ :param interface: Name of an interface on the node.
+ :param address: IP address to configure.
+ :param prefix: IP network prefix.
+ :type node: dict
+ :type interface: str
+ :type address: str
+ :type prefix: int
+ :raises RuntimeError: If the configuration fails.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+
+ # Enable IPv6 for only the specified interface
+ cmd = "sudo sysctl net.ipv6.conf.{0}.disable_ipv6=0".format(interface)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not enable IPv6 on interface.")
+
+ # Configure IPv6 address on the interface
+ cmd = "sudo ip address add {address}/{prefix} dev {interface}".format(
+ interface=interface,
+ address=address,
+ prefix=prefix)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not configure IP address on interface.")
+
+ # Set the interface up
+ cmd = "sudo ip link set {interface} up".format(interface=interface)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not change the interface to 'up' state.")
+
+ @staticmethod
+ def configure_control_interface_tunnel(node, src_port, dst_ip, dst_port):
+ """Configure a tunnel on the specified node, tunelling any IPv4 traffic
+ from one port to the specified address.
+
+ :param node: Node in topology.
+ :param src_port: Port to tunnel traffic from.
+ :param dst_ip: IP address to tunnel traffic to.
+ :param dst_port: Port to tunnel traffic to.
+ :type node: dict
+ :type src_port: int
+ :type dst_ip: str
+ :type dst_port: int
+ :raises RuntimeError: If tunnel creation is not successful.
+ """
+
+ cmd = "nohup socat TCP4-LISTEN:{src_port},fork,su=nobody " \
+ "TCP6:[{dst_ip}]:{dst_port} $@ > " \
+ "/tmp/socat.log 2>&1 &".format(
+ src_port=src_port,
+ dst_ip=dst_ip,
+ dst_port=dst_port)
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command_sudo(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not configure tunnel.")