diff options
Diffstat (limited to 'resources/libraries/robot/features')
| -rw-r--r-- | resources/libraries/robot/features/acl.robot | 294 | ||||
| -rw-r--r-- | resources/libraries/robot/features/gbp.robot | 2 |
2 files changed, 295 insertions, 1 deletions
diff --git a/resources/libraries/robot/features/acl.robot b/resources/libraries/robot/features/acl.robot new file mode 100644 index 0000000000..a70a34c2db --- /dev/null +++ b/resources/libraries/robot/features/acl.robot @@ -0,0 +1,294 @@ +# Copyright (c) 2019 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Documentation | ACL keywords. + +*** Keywords *** +| Configure MACIP ACLs +| | [Documentation] +| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs +| | ... | plus two hitting ACEs for both traffic directions. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node. Type: dictionary +| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string +| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ +| | ... | \| GigabitEthernet0/8/0 \| +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - src_mac_start - Source MAC address start in format with colons. +| | ... | Type: string +| | ... | - src_mac_step - Source MAC address step. Type: string +| | ... | - src_mac_mask - Source MAC address mask. 00:00:00:00:00:00 is a +| | ... | wildcard mask. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. +| | ... | Type: integer +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | Type: string +| | ... | - tg_stream1_subnet - IP subnet used by TG in direction 0->1. +| | ... | Type: string +| | ... | - tg_stream2_subnet - IP subnet used by TG in direction 1->0. +| | ... | Type: string +| | ... | - tg_stream1_mac - Source MAC address of traffic stream 1. +| | ... | Type: string +| | ... | - tg_stream2_mac - Source MAC address of traffic stream 2. +| | ... | Type: string +| | ... | - tg_mac_mask - MAC address mask for traffic streams. +| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string +| | ... +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} +| | ... +| | ${src_ip_int} = | IP To Int | ${src_ip_start} +| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step} +| | ... +| | ${ip_limit} = | Set Variable | 255.255.255.255 +| | ${ip_limit_int} = | IP To Int | ${ip_limit} +| | ... +| | ${src_mac_int} = | Mac To Int | ${src_mac_start} +| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step} +| | ... +| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff +| | ${mac_limit_int} = | Mac To Int | ${mac_limit} +| | ... +| | ${acl}= | Set Variable | ipv4 permit +| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} +| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step} +| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step} +| | | ${ipv4_limit_reached}= | Set Variable If +| | | ... | ${src_ip_int} > ${ip_limit_int} | ${TRUE} +| | | ${mac_limit_reached}= | Set Variable If +| | | ... | ${src_mac_int} > ${mac_limit_int} | ${TRUE} +| | | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' | Log +| | | ... | Can't do more iterations - IPv4 address limit has been reached. +| | | ... | WARN +| | | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' | Log +| | | ... | Can't do more iterations - MAC address limit has been reached. +| | | ... | WARN +| | | ${src_ip} = | Run Keyword If | '${ipv4_limit_reached}' == '${TRUE}' +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Int To IP | ${src_ip_int} +| | | ${src_mac}= | Run Keyword If | '${mac_limit_reached}' == '${TRUE}' +| | | ... | Set Variable | ${mac_limit} +| | | ... | ELSE | Int To Mac | ${src_mac_int} +| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32 +| | | ... | mac ${src_mac} | mask ${src_mac_mask}, +| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}' +| | ${acl0}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac} +| | ... | mask ${tg_mac_mask} +| | ${acl1}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} ip ${tg_stream2_subnet} mac ${tg_stream2_mac} +| | ... | mask ${tg_mac_mask} +| | Add Macip Acl Multi Entries | ${dut} | rules=${acl0} +| | Add Macip Acl Multi Entries | ${dut} | rules=${acl1} +| | ${acl_idx}= | Set Variable | 0 +| | Run Keyword Unless | '${dut_if1}' == '${NONE}' +| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if1} | add | ${acl_idx} +| | ${acl_idx}= | Set Variable | 1 +| | Run Keyword Unless | '${dut_if2}' == '${NONE}' +| | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} + +| Configure IPv4 ACLs +| | [Documentation] +| | ... | Configure ACL with required number of not-hitting permit ACEs plus two +| | ... | hitting ACEs for both traffic directions. +| | ... +| | ... | *Arguments:* +| | ... | - dut_node - DUT node. Type: dictionary +| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string +| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \ +| | ... | \| GigabitEthernet0/8/0 \| +| | ... +| | ... | _NOTE:_ This KW uses following test case variables: +| | ... | - src_ip_start - Source IP address start. Type: string +| | ... | - dst_ip_start - Destination IP address start. Type: string +| | ... | - ip_step - IP address step. Type: string +| | ... | - sport_start - Source port number start. Type: string +| | ... | - dport_start - Destination port number start. Type: string +| | ... | - port_step - Port number step. Type: string +| | ... | - no_hit_aces_number - Number of not-hitting ACEs to be configured. +| | ... | Type: integer +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | Type: string +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | Type: string +| | ... | - trex_stream1_subnet - IP subnet used by T-Rex in direction 0->1. +| | ... | Type: string +| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0. +| | ... | Type: string +| | ... +| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE} +| | ${src_ip_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step +| | ... | modules=ipaddress +| | ${dst_ip_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($dst_ip_start))) - $ip_step +| | ... | modules=ipaddress +| | ${ip_limit} = | Set Variable | 255.255.255.255 +| | ${ip_limit_int} = | Evaluate +| | ... | int(ipaddress.ip_address(unicode($ip_limit))) | modules=ipaddress +| | ${sport}= | Evaluate | $sport_start - $port_step +| | ${dport}= | Evaluate | $dport_start - $port_step +| | ${port_limit}= | Set Variable | ${65535} +| | ${acl}= | Set Variable | ipv4 permit +| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number} +| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step +| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step +| | | ${sport}= | Evaluate | $sport + $port_step +| | | ${dport}= | Evaluate | $dport + $port_step +| | | ${ipv4_limit_reached}= | Set Variable If +| | | ... | $src_ip_int > $ip_limit_int or $src_ip_int > $ip_limit_int +| | | ... | ${TRUE} +| | | ${udp_limit_reached}= | Set Variable If +| | | ... | $sport > $port_limit or $dport > $port_limit | ${TRUE} +| | | Run Keyword If | $ipv4_limit_reached is True | Log +| | | ... | Can't do more iterations - IPv4 address limit has been reached. +| | | ... | WARN +| | | Run Keyword If | $udp_limit_reached is True | Log +| | | ... | Can't do more iterations - UDP port limit has been reached. +| | | ... | WARN +| | | ${src_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($src_ip_int)) +| | | ... | modules=ipaddress +| | | ${dst_ip} = | Run Keyword If | $ipv4_limit_reached is True +| | | ... | Set Variable | ${ip_limit} +| | | ... | ELSE | Evaluate | str(ipaddress.ip_address($dst_ip_int)) +| | | ... | modules=ipaddress +| | | ${sport}= | Set Variable If | ${sport} > $port_limit | $port_limit +| | | ... | ${sport} +| | | ${dport}= | Set Variable If | ${dport} > $port_limit | $port_limit +| | | ... | ${dport} +| | | ${acl}= | Catenate | ${acl} | src ${src_ip}/32 dst ${dst_ip}/32 +| | | ... | sport ${sport} | dport ${dport}, +| | | Exit For Loop If +| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True +| | ${acl}= | Catenate | ${acl} +| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet}, +| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list}= | Create List | ${0} +| | Run Keyword If | 'input' in $acl_apply_type and $dut_if1 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | input | ${acl_list} +| | Run Keyword If | 'input' in $acl_apply_type and $dut_if2 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | input | ${acl_list} +| | Run Keyword If | 'output' in $acl_apply_type and $dut_if1 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if1} | output +| | ... | ${acl_list} +| | Run Keyword If | 'output' in $acl_apply_type and $dut_if2 is not None +| | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output +| | ... | ${acl_list} + +| Configure ACLs on a single interface +| | [Documentation] +| | ... | Configure ACL +| | ... +| | ... | *Arguments:* +| | ... | - dut - DUT node. Type: string +| | ... | - dut_if - DUT node interface name. Type: string +| | ... | - acl_apply_type - To what path apply the ACL - input or output. +| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect. +| | ... | - subnets - Subnets to apply the specific ACL. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']} +| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0 +| | ... +| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action} +| | ... | @{subnets} +| | Set Test variable | ${acl} | ${EMPTY} +| | :FOR | ${subnet} | IN | @{subnets} +| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}' +| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet} +| | | ... | ELSE +| | | ... | Catenate | SEPARATOR=", " | ${acl} +| | | ... | ipv4 ${acl_action} src ${subnet} +| | Add Replace Acl Multi Entries | ${dut} | rules=${acl} +| | @{acl_list} = | Create List | ${0} +| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type} +| | ... | ${acl_list} + +| Initialize IPv4 routing with IPv4 ACLs on DUT1 in circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node +| | ... | circular topology. Get the interface MAC addresses and setup ARP on +| | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG +| | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix +| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 +| | ... | and next hop of neighbour DUT interface IPv4 address. +| | ... | Apply required ACL rules to DUT1 interfaces. +| | ... +| | ... | *Arguments:* +| | ... | - ip_nr - Number of IPs to be used. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize IPv4 routing fwith IPv4 ACLs on DUT1 \ +| | ... | in 3-node circular topology \| +| | ... +| | [Arguments] | ${ip_nr}=${1} +| | ... +| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ... | Variable Should Exist | ${dut2} +| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2} +| | ... | ELSE | Set Variable | ${dut1} +| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Set Variable | ${dut2_if2} +| | ... | ELSE | Set Variable | ${dut1_if2} +| | ... +| | Set interfaces in path up +| | ... +| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 +| | | VPP Add IP Neighbor +| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac} +| | | VPP Add IP Neighbor +| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac} +| | ... +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24 +| | VPP Interface Set IP Address +| | ... | ${dut} | ${dut_if2} | 20.20.20.1 | 24 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30 +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | VPP Interface Set IP Address +| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30 +| | ... +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2 +| | ... | interface=${dut1_if2} +| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1 +| | ... | interface=${dut2_if1} +| | ... +| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} diff --git a/resources/libraries/robot/features/gbp.robot b/resources/libraries/robot/features/gbp.robot index 6ebdad1532..8495475639 100644 --- a/resources/libraries/robot/features/gbp.robot +++ b/resources/libraries/robot/features/gbp.robot @@ -14,7 +14,7 @@ *** Settings *** | Library | resources.libraries.python.GBP | ... -| Documentation | GBP keywords +| Documentation | GBP keywords. *** Keywords *** | Initialize GBP routing domains on node |