aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/features
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/features')
-rw-r--r--resources/libraries/robot/features/acl.robot70
-rw-r--r--resources/libraries/robot/features/gbp.robot28
-rw-r--r--resources/libraries/robot/features/policer.robot27
3 files changed, 66 insertions, 59 deletions
diff --git a/resources/libraries/robot/features/acl.robot b/resources/libraries/robot/features/acl.robot
index a70a34c2db..fa94507994 100644
--- a/resources/libraries/robot/features/acl.robot
+++ b/resources/libraries/robot/features/acl.robot
@@ -19,17 +19,17 @@
| | [Documentation]
| | ... | Configure MACIP ACL with required number of not-hitting permit ACEs
| | ... | plus two hitting ACEs for both traffic directions.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut_node - DUT node. Type: dictionary
| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure MACIP ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
| | ... | \| GigabitEthernet0/8/0 \|
-| | ...
+| |
| | ... | _NOTE:_ This KW uses following test case variables:
| | ... | - src_ip_start - Source IP address start. Type: string
| | ... | - ip_step - IP address step. Type: string
@@ -52,23 +52,23 @@
| | ... | Type: string
| | ... | - tg_mac_mask - MAC address mask for traffic streams.
| | ... | 00:00:00:00:00:00 is a wildcard mask. Type: string
-| | ...
+| |
| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE}
-| | ...
+| |
| | ${src_ip_int} = | IP To Int | ${src_ip_start}
| | ${src_ip_int} = | Evaluate | ${src_ip_int} - ${ip_step}
-| | ...
+| |
| | ${ip_limit} = | Set Variable | 255.255.255.255
| | ${ip_limit_int} = | IP To Int | ${ip_limit}
-| | ...
+| |
| | ${src_mac_int} = | Mac To Int | ${src_mac_start}
| | ${src_mac_int} = | Evaluate | ${src_mac_int} - ${src_mac_step}
-| | ...
+| |
| | ${mac_limit} = | Set Variable | ff:ff:ff:ff:ff:ff
| | ${mac_limit_int} = | Mac To Int | ${mac_limit}
-| | ...
+| |
| | ${acl}= | Set Variable | ipv4 permit
-| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
+| | FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
| | | ${src_ip_int} = | Evaluate | ${src_ip_int} + ${ip_step}
| | | ${src_mac_int} = | Evaluate | ${src_mac_int} + ${src_mac_step}
| | | ${ipv4_limit_reached}= | Set Variable If
@@ -90,6 +90,7 @@
| | | ${acl}= | Catenate | ${acl} | ip ${src_ip}/32
| | | ... | mac ${src_mac} | mask ${src_mac_mask},
| | | Exit For Loop If | '${ipv4_limit_reached}' == '${TRUE}' or '${mac_limit_reached}' == '${TRUE}'
+| | END
| | ${acl0}= | Catenate | ${acl}
| | ... | ipv4 ${acl_action} ip ${tg_stream1_subnet} mac ${tg_stream1_mac}
| | ... | mask ${tg_mac_mask}
@@ -109,17 +110,17 @@
| | [Documentation]
| | ... | Configure ACL with required number of not-hitting permit ACEs plus two
| | ... | hitting ACEs for both traffic directions.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut_node - DUT node. Type: dictionary
| | ... | - dut_if1 - DUT node interface1 name (Optional). Type: string
| | ... | - dut_if2 - DUT node interface2 name (Optional). Type: string
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure IPv4 ACLs \| ${nodes['DUT1']} \| GigabitEthernet0/7/0 \
| | ... | \| GigabitEthernet0/8/0 \|
-| | ...
+| |
| | ... | _NOTE:_ This KW uses following test case variables:
| | ... | - src_ip_start - Source IP address start. Type: string
| | ... | - dst_ip_start - Destination IP address start. Type: string
@@ -137,7 +138,7 @@
| | ... | Type: string
| | ... | - trex_stream2_subnet - IP subnet used by T-Rex in direction 1->0.
| | ... | Type: string
-| | ...
+| |
| | [Arguments] | ${dut} | ${dut_if1}=${NONE} | ${dut_if2}=${NONE}
| | ${src_ip_int} = | Evaluate
| | ... | int(ipaddress.ip_address(unicode($src_ip_start))) - $ip_step
@@ -152,7 +153,7 @@
| | ${dport}= | Evaluate | $dport_start - $port_step
| | ${port_limit}= | Set Variable | ${65535}
| | ${acl}= | Set Variable | ipv4 permit
-| | :FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
+| | FOR | ${nr} | IN RANGE | 0 | ${no_hit_aces_number}
| | | ${src_ip_int} = | Evaluate | $src_ip_int + $ip_step
| | | ${dst_ip_int} = | Evaluate | $dst_ip_int + $ip_step
| | | ${sport}= | Evaluate | $sport + $port_step
@@ -184,6 +185,7 @@
| | | ... | sport ${sport} | dport ${dport},
| | | Exit For Loop If
| | | ... | $ipv4_limit_reached is True or $udp_limit_reached is True
+| | END
| | ${acl}= | Catenate | ${acl}
| | ... | ipv4 ${acl_action} src ${trex_stream1_subnet},
| | ... | ipv4 ${acl_action} src ${trex_stream2_subnet}
@@ -203,28 +205,29 @@
| Configure ACLs on a single interface
| | [Documentation]
| | ... | Configure ACL
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut - DUT node. Type: string
| | ... | - dut_if - DUT node interface name. Type: string
| | ... | - acl_apply_type - To what path apply the ACL - input or output.
| | ... | - acl_action - Action for the rule - deny, permit, permit+reflect.
| | ... | - subnets - Subnets to apply the specific ACL. Type: list
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Configure ACLs on a single interface \| ${nodes['DUT1']}
| | ... | \| ... \| GigabitEthernet0/7/0 \| input \| permit | 0.0.0.0/0
-| | ...
+| |
| | [Arguments] | ${dut} | ${dut_if} | ${acl_apply_type} | ${acl_action}
| | ... | @{subnets}
| | Set Test variable | ${acl} | ${EMPTY}
-| | :FOR | ${subnet} | IN | @{subnets}
+| | FOR | ${subnet} | IN | @{subnets}
| | | ${acl} = | Run Keyword If | '${acl}' == '${EMPTY}'
| | | ... | Set Variable | ipv4 ${acl_action} src ${subnet}
| | | ... | ELSE
| | | ... | Catenate | SEPARATOR=", " | ${acl}
| | | ... | ipv4 ${acl_action} src ${subnet}
+| | END
| | Add Replace Acl Multi Entries | ${dut} | rules=${acl}
| | @{acl_list} = | Create List | ${0}
| | Set Acl List For Interface | ${dut} | ${dut_if} | ${acl_apply_type}
@@ -239,17 +242,17 @@
| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24
| | ... | and next hop of neighbour DUT interface IPv4 address.
| | ... | Apply required ACL rules to DUT1 interfaces.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - ip_nr - Number of IPs to be used. Type: integer
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize IPv4 routing fwith IPv4 ACLs on DUT1 \
| | ... | in 3-node circular topology \|
-| | ...
+| |
| | [Arguments] | ${ip_nr}=${1}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -258,21 +261,22 @@
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2_if2}
| | ... | ELSE | Set Variable | ${dut1_if2}
-| | ...
+| |
| | Set interfaces in path up
-| | ...
-| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
+| |
+| | FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
| | | VPP Add IP Neighbor
| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac}
| | | VPP Add IP Neighbor
| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac}
+| | END
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
| | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Add IP Neighbor
| | ... | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
-| | ...
+| |
| | VPP Interface Set IP Address
| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24
| | VPP Interface Set IP Address
@@ -283,12 +287,12 @@
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | VPP Interface Set IP Address
| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
-| | ...
+| |
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | gateway=1.1.1.2
| | ... | interface=${dut1_if2}
| | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | gateway=1.1.1.1
| | ... | interface=${dut2_if1}
-| | ...
+| |
| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
diff --git a/resources/libraries/robot/features/gbp.robot b/resources/libraries/robot/features/gbp.robot
index 8495475639..57ddf6dd1a 100644
--- a/resources/libraries/robot/features/gbp.robot
+++ b/resources/libraries/robot/features/gbp.robot
@@ -13,26 +13,26 @@
*** Settings ***
| Library | resources.libraries.python.GBP
-| ...
+|
| Documentation | GBP keywords.
*** Keywords ***
| Initialize GBP routing domains on node
| | [Documentation]
| | ... | Initialize GBP routing domains on node.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - dut - DUT node. Type: string
| | ... | - count - Number of baseline interface variables. Type: integer
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize GBP routing domains on node \| DUT1 \| 1 \|
-| | ...
+| |
| | [Arguments] | ${dut} | ${count}=${1}
-| | ...
+| |
| | ${dut_str}= | Convert To Lowercase | ${dut}
-| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| | FOR | ${id} | IN RANGE | 1 | ${count} + 1
| | | ${hexa_id}= | Convert To Hex | ${id} | length=2 | lowercase=yes
| | | ${dut_lo}= | VPP Create Loopback | ${nodes['${dut}']}
| | | ... | mac=ba:dc:00:ff:ee:${hexa_id}
@@ -80,20 +80,22 @@
| | | ... | ${nodes['${dut}']} | ${200} | ${300} | acl_index=${0}
| | | GBP Contract Add Del
| | | ... | ${nodes['${dut}']} | ${300} | ${200} | acl_index=${0}
+| | END
| Initialize GBP routing domains
| | [Documentation]
| | ... | Initialize GBP routing domains on all DUTs.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - count - Number of GBP routing domains. Type: integer
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Initialize GBP routing domains \| 1 \|
-| | ...
+| |
| | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
| | | Initialize GBP routing domains on node | ${dut} | count=${count}
+| | END
| | Set interfaces in path up
diff --git a/resources/libraries/robot/features/policer.robot b/resources/libraries/robot/features/policer.robot
index 962f4cf2be..bbabdd7632 100644
--- a/resources/libraries/robot/features/policer.robot
+++ b/resources/libraries/robot/features/policer.robot
@@ -14,7 +14,7 @@
*** Settings ***
| Library | resources.libraries.python.Classify
| Library | resources.libraries.python.Policer
-| ...
+|
| Documentation | Policer keywords
*** Keywords ***
@@ -23,7 +23,7 @@
| | ... | Setup of 2r3c color-aware or color-blind policer with dst IPv4 match
| | ... | on all DUT nodes in 2-node / 3-node circular topology. Policer is
| | ... | applied on links TG - DUTx.
-| | ...
+| |
| | ${policer_index}= | Policer Set Configuration | ${dut1} | policer1 | ${cir}
| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
@@ -35,7 +35,7 @@
| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
| | Policer Classify Set Interface | ${dut1} | ${dut1_if1}
| | ... | ip4_table_index=${table_idx}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -44,7 +44,7 @@
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2_if2}
| | ... | ELSE | Set Variable | ${dut1_if2}
-| | ...
+| |
| | ${policer_index}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Policer Set Configuration | ${dut} | policer2 | ${cir}
| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
@@ -65,7 +65,7 @@
| | ... | Setup of 2r3c color-aware or color-blind policer with dst IPv6 match
| | ... | on all DUT nodes in 2-node / 3-node circular topology. Policer is
| | ... | applied on links TG - DUTx.
-| | ...
+| |
| | ${policer_index}= | Policer Set Configuration | ${dut1} | policer1 | ${cir}
| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
| | ... | Mark_and_Transmit | Transmit | ${t} | exceed_dscp=${dscp}
@@ -77,7 +77,7 @@
| | ... | hit_next_index=${policer_index} | opaque_index=${pre_color}
| | Policer Classify Set Interface | ${dut1} | ${dut1_if1}
| | ... | ip6_table_index=${table_idx}
-| | ...
+| |
| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
| | ... | Variable Should Exist | ${dut2}
| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -86,7 +86,7 @@
| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Set Variable | ${dut2_if2}
| | ... | ELSE | Set Variable | ${dut1_if2}
-| | ...
+| |
| | ${policer_index}= | Run Keyword If | '${dut2_status}' == 'PASS'
| | ... | Policer Set Configuration | ${dut} | policer2 | ${cir}
| | ... | ${eir} | ${cb} | ${eb} | pps | Closest | 2R3C_RFC_2698 | Transmit
@@ -105,16 +105,17 @@
| Show Classify Tables Verbose on all DUTs
| | [Documentation] | Show classify tables verbose on all DUT nodes in topology.
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - nodes - Topology. Type: dictionary
-| | ...
+| |
| | ... | *Example:*
-| | ...
+| |
| | ... | \| Show Classify Tables Verbose on all DUTs \| ${nodes} \|
-| | ...
+| |
| | [Arguments] | ${nodes}
-| | ...
+| |
| | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
| | | Show Classify Tables Verbose | ${nodes['${dut}']}
+| | END