diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/honeycomb.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/honeycomb.robot | 375 |
1 files changed, 0 insertions, 375 deletions
diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot deleted file mode 100644 index cf89229dfd..0000000000 --- a/resources/libraries/robot/honeycomb/honeycomb.robot +++ /dev/null @@ -1,375 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.HoneycombSetup -| Library | resources.libraries.python.honeycomb.HoneycombUtil -| Library | resources.libraries.python.honeycomb.HcPersistence -| Library | resources.libraries.python.DUTSetup -| Library | resources.libraries.python.InterfaceUtil -| Resource | resources/libraries/robot/shared/default.robot - -*** Keywords *** -| Configure Honeycomb service on DUTs -| | [Documentation] | *Setup environment for honeycomb testing.* -| | ... -| | ... | _Setup steps:_ -| | ... | - 1. Login to each honeycomb node using ssh -| | ... | - 2. Startup honeycomb service -| | ... | - 3. Monitor service startup using HTTP GET request loop -| | ... | Expected sequence of HTTP replies: -| | ... | connection refused -> 404 -> 401 -> 503 or 500 -> 200 (pass) -| | ... | - 4. Configure honeycomb nodes using HTTP PUT request -| | ... -| | ... | _Arguments:_ -| | ... | - duts - list of nodes to setup Honeycomb on -| | ... -| | ... | _Used global constants and variables:_ -| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory -| | ... | - HTTPCodes - HTTP protocol status codes -| | ... -| | [Arguments] | @{duts} -| | Start honeycomb on DUTs | @{duts} -| | :FOR | ${dut} | IN | @{duts} -| | | Check honeycomb startup state | @{duts} -| | | Sleep | 5s | Make sure all modules are loaded and ready. - -| Stop Honeycomb service on DUTs -| | [Documentation] | *Cleanup environment after honeycomb testing.* -| | ... -| | ... | _Teardown steps:_ -| | ... | - 1. Login to each honeycomb node using ssh -| | ... | - 2. Stop honeycomb service -| | ... | - 3. Monitor service shutdown using HTTP GET request loop -| | ... | Expected sequence of HTTP replies: -| | ... | 200 -> 404 -> connection refused (pass) -| | ... -| | ... | _Arguments:_ -| | ... | - duts - list of nodes to stop Honeycomb on -| | ... -| | ... | _Used global constants and variables:_ -| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory -| | ... | - HTTPCodes - HTTP protocol status codes -| | ... -| | [Arguments] | @{duts} -| | Stop honeycomb on DUTs | @{duts} -| | :FOR | ${dut} | IN | @{duts} -| | | Wait until keyword succeeds | 60sec | 15sec -| | | ... | Check honeycomb shutdown state | @{duts} - -| Clear persisted Honeycomb configuration -| | [Documentation] | *Delete saved configuration.* -| | ... -| | ... | *Arguments:* -| | ... | - duts - one or more nodes to clear persistence on. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Clear persisted Honeycomb configuration \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | @{duts} -| | Clear persisted Honeycomb config | @{duts} - -| Restart Honeycomb and VPP and clear persisted configuration -| | [Documentation] | Restarts Honeycomb and VPP with default configuration. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart Honeycomb and VPP and clear persisted configuration \ -| | ... | \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Clear persisted Honeycomb configuration | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Restart Honeycomb and VPP -| | [Documentation] | Stops the Honeycomb service and verifies it is stopped. -| | ... | Then restarts VPP, starts Honeycomb again and verifies it is running. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Restart Honeycomb and VPP in performance test -| | [Documentation] | Stops Honeycomb and VPP and verifies HC is stopped. -| | ... | Then restarts VPP, starts Honeycomb again and verifies it is running. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Configure Honeycomb service on DUTs | ${node} -| | Check honeycomb startup state | ${node} | timeout=120 - -| Archive Honeycomb logs -| | [Documentation] | Copies log files from Honeycomb node\ -| | ... | to test executor. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - perf - Running on performance testbed? Yes/no Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Archive Honeycomb logs \| ${nudes['DUT1']} \| -| | ... -| | [Arguments] | ${node} | ${perf}=${False} -| | Archive Honeycomb log | ${node} | ${perf} -| | Archive ODL log | ${node} - -| Configure ODL Client Service On DUT -| | [Documentation] | Configure and start ODL client, then repeatedly check if -| | ... | it is running. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - odl_name - Name of ODL client version. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure ODL Client Service on DUT \| ${nodes['DUT1']} \ -| | ... | \| carbon-SR1 \| -| | ... -| | [Arguments] | ${node} | ${odl_name} -| | Copy ODL Client | ${node} | ${odl_name} | /mnt/common | /tmp -| | Setup ODL Client | ${node} | /tmp -| | Wait until keyword succeeds | 3min | 30sec -| | ... | Install ODL Features | ${node} | /tmp -| | Wait until keyword succeeds | 4min | 15sec -| | ... | Mount Honeycomb on ODL | ${node} -| | Wait until keyword succeeds | 2min | 15sec -| | ... | Check ODL startup state | ${node} -| | Check honeycomb startup state | ${node} | timeout=120 - -| Configure Honeycomb for functional testing -| | [Documentation] | Configure Honeycomb with parameters for functional -| | ... | testing, then start Honeycomb and repeatedly check startup status. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure Honeycomb for functional testing \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Configure Restconf binding address | ${node} -| | Configure Log Level | ${node} | TRACE -| | Configure Persistence | ${node} | disable -| | Configure jVPP timeout | ${node} | ${10} -| | Generate Honeycomb startup configuration for ODL test | ${node} -| | Clear Persisted Honeycomb Configuration | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Configure ODL Client for functional testing -| | [Documentation] | Read external variable HC_ODL. Depending on its -| | ... | value either: do nothing, or setup ODL client for testing and -| | ... | create a global variable that modifies Restconf requests to use ODL. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Configure ODL Client for functional testing \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ${use_odl_client}= | Get Variable Value | ${HC_ODL} -| | Run Keyword If | '${use_odl_client}' != '${NONE}' -| | ... | Run Keywords -| | ... | Set Global Variable | ${use_odl_client} | AND -| | ... | Configure ODL Client Service On DUT | ${node} | ${use_odl_client} -| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL. -| | ... | level=INFO - -| Set Up Honeycomb Functional Test Suite -| | [Documentation] | Generic test suite setup for Honeycomb functional tests. -| | ... | Restarts VPP, then enables Honeycomb and optionally ODL, based -| | ... | on external variable. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Set Up Honeycomb Functional Test Suite \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | All TGs Set Interface Default Driver | ${nodes} -| | Configure Honeycomb for functional testing | ${node} -| | Configure ODL Client for functional testing | ${node} - -| Tear Down Honeycomb Functional Test Suite -| | [Documentation] | Generic test suite teardown for Honeycomb functional -| | ... | tests. Stops ODL client (if used), then stops Honeycomb and verifies -| | ... | that they are both stopped. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Tear Down Honeycomb Functional Test Suite \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Append suite to Honeycomb log file | ${node} -| | ${use_odl_client}= | Get Variable Value | ${HC_ODL} -| | Run Keyword If | '${use_odl_client}' != '${NONE}' -| | ... | Run Keywords -| | ... | Append suite to ODL log file | ${node} | ${use_odl_client} | AND -| | ... | Stop ODL Client | ${node} | /tmp | AND -| | ... | Wait until keyword succeeds | 3min | 15sec -| | ... | Check ODL shutdown state | ${node} | AND -| | ... | Set Global Variable | ${use_odl_client} | ${NONE} -| | Stop Honeycomb service on DUTs | ${node} -| | Clear Honeycomb Log | ${node} -| | Stop VPP Service | ${node} - -| Enable Honeycomb Feature -| | [Documentation] | Enable the specified feature in Honeycomb configuration. -| | ... | Requires a restart of Honeycomb to take effect. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Enable Honeycomb Feature \| ${nodes['DUT1']} \| NSH \| -| | ... -| | [arguments] | ${node} | ${feature} -| | Manage Honeycomb Features | ${node} | ${feature} - -| Disable Honeycomb Feature -| | [Documentation] | Disable the specified feature in Honeycomb configuration. -| | ... | Requires a restart of Honeycomb to take effect. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Disable Honeycomb Feature \| ${nodes['DUT1']} \| NSH \| -| | ... -| | [arguments] | ${node} | ${feature} -| | Manage Honeycomb Features | ${node} | ${feature} | disable=${True} - -| Honeycomb Performance Suite Setup Generic -| | [Documentation] | Generic test suite setup for Honeycomb performance tests. -| | ... | Performs multiple attempts to start Honeycomb+VPP stack. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb Performance Suite Setup Generic \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Wait until keyword succeeds | 8min | 2min -| | ... | Restart Honeycomb and VPP in Performance test | ${node} - -| Honeycomb Performance Suite Teardown Generic -| | [Documentation] | Generic test suite teardown for Honeycomb performance -| | ... | tests. Logs CPU usage before stopping Honeycomb. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb Performance Suite Teardown Generic \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Log Honeycomb and VPP process distribution on cores | ${node} -| | Append suite to Honeycomb log file | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Clear Honeycomb Log | ${node} -| | Stop VPP Service | ${node} - -| Append suite to Honeycomb log file -| | [Documentation] | Add the contents of honeycomb.log for the current suite\ -| | ... | to the full log which will be archived. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Append suite to Honeycomb log file \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Append Honeycomb log | ${node} | ${SUITE_NAME} - -| Append suite to ODL log file -| | [Documentation] | Add the contents of ODL karaf.log for the current suite\ -| | ... | to the full log which will be archived. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - odl_name - name of ODL client version. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Append suite to ODL karaf log file \| ${nodes['DUT1']} \ -| | ... | \| Oxygen \| -| | ... -| | [Arguments] | ${node} | ${odl_name} -| | Append ODL log | ${node} | ${odl_name} | ${SUITE_NAME} - -| Generate Honeycomb startup configuration for ODL test -| | [Documentation] | Create HC startup configuration and apply to config -| | ... | file on DUT. Requires Honeycomb restart to take effect. -| | ... -| | ... | *Arguments:* -| | ... | - node - Honeycomb node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Generate Honeycomb startup configuration for ODL test \ -| | ... | \| ${nodes[DUT1]} \| -| | ... -| | [Arguments] | ${node} -| | Import Library | resources.libraries.python.honeycomb.HoneycombSetup.HoneycombStartupConfig -| | ... | WITH NAME | HC_config -| | Run Keyword | HC_config.Set SSH Security provider -| | Run Keyword | HC_config.Set Memory Size | ${32} -| | Run Keyword | HC_config.Set Metaspace Size | ${32} -| | Run Keyword | HC_config.Apply config | ${node} |