diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/interfaces.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/interfaces.robot | 165 |
1 files changed, 79 insertions, 86 deletions
diff --git a/resources/libraries/robot/honeycomb/interfaces.robot b/resources/libraries/robot/honeycomb/interfaces.robot index 1ffc2e42bb..706da54d64 100644 --- a/resources/libraries/robot/honeycomb/interfaces.robot +++ b/resources/libraries/robot/honeycomb/interfaces.robot @@ -92,7 +92,7 @@ | | Should be equal | ${vat_state} | ${state} | Honeycomb sets interface ipv4 address -| | [Documentation] | Uses Honeycomb API to change ipv4 configuration\ +| | [Documentation] | Uses Honeycomb API to change ipv4 address\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* @@ -100,20 +100,14 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - netmask - subnet mask to set. Type: string -| | ... | - settings - ipv4 interface settings. Type: dictionary | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface ipv4 configuration \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \ -| | ... | \| ${{'enabled': True, 'mtu': 1500}} \| +| | ... | \| Honeycomb sets interface ipv4 address \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} -| | ... | ${settings} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${netmask} -| | :FOR | ${key} | IN | @{settings.keys()} -| | | interfaceAPI.Configure interface ipv4 -| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']} | Honeycomb sets interface ipv4 address with prefix | | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\ @@ -124,41 +118,17 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: int -| | ... | - settings - ipv4 interface settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv4 address with prefix \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} -| | ... | ${settings} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| | :FOR | ${key} | IN | @{settings.keys()} -| | | interfaceAPI.Configure interface ipv4 -| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']} -| Honeycomb adds interface ipv4 neighbor -| | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ -| | ... | specified interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... | - fib_address - IP address to add to fib table. Type: string -| | ... | - fib_mac - MAC address to add to fib table. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb adds interface ipv4 neighbor \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ -| | ... | \| ${{'enabled': True, 'mtu': 1500}} \| -| | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} -| | interfaceAPI.Add ipv4 neighbor -| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} - -| IPv4 config from Honeycomb should be -| | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\ +| IPv4 address from Honeycomb should be +| | [Documentation] | Retrieves interface ipv4 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* @@ -166,33 +136,20 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - prefix length to expect. Type: string -| | ... | - fib_address - IP address to expect in fib table. Type: string -| | ... | - fib_mac - MAC address to expect in fib table. Type: string -| | ... | - settings - ipv4 interface settings to expect. Type: dictionary | | ... | | ... | *Example:* | | ... -| | ... | \| IPv4 config from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| IPv4 address from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \ -| | ... | \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ -| | ... | \| ${{'enabled': True, 'mtu': 1500}} \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} -| | ... | ${fib_address} | ${fib_mac} | ${settings} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be equal | ${address} | | ... | ${api_data['ietf-ip:ipv4']['address'][0]['ip']} | | Should be equal | ${prefix} | | ... | ${api_data['ietf-ip:ipv4']['address'][0]['prefix-length']} -| | Should be equal | ${fib_address} -| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']} -| | Should be equal | ${fib_mac} -| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['link-layer-address']} -| | :FOR | ${key} | IN | @{settings.keys()} -| | | Should be equal -| | | ... | ${settings['${key}']} | ${api_data['ietf-ip:ipv4']['${key}']} -| IPv4 config from VAT should be -| | [Documentation] | Retrieves interface ipv4 configuration through VAT and\ +| IPv4 address from VAT should be +| | [Documentation] | Retrieves interface ipv4 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* @@ -203,7 +160,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| IPv4 config from VAT should be \| ${nodes['DUT1']} \ +| | ... | \| IPv4 address from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses @@ -240,7 +197,8 @@ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} -| | Should be empty | ${api_data['ietf-ip:ipv4']['address'] +| | Run keyword and expect error | *KeyError: 'ietf-ip:ipv4' +| | ... | Set Variable | ${api_data['ietf-ip:ipv4']['address']} | IPv4 address from VAT should be empty | | [Documentation] | Retrieves interface ipv4 configuration through VAT and\ @@ -255,12 +213,68 @@ | | ... | \| IPv4 config from VAT should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} -| | Run keyword and expect error | *No JSON object could be decoded.* +| | Run keyword and expect error | *No JSON object could be decoded* | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 -| Honeycomb sets interface ipv6 configuration -| | [Documentation] | Uses Honeycomb API to change ipv6 configuration\ +| Honeycomb adds interface ipv4 neighbor +| | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ +| | ... | specified interface. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - fib_address - IP address to add to fib table. Type: string +| | ... | - fib_mac - MAC address to add to fib table. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds interface ipv4 neighbor \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ +| | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} +| | interfaceAPI.Add ipv4 neighbor +| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} + +| IPv4 neighbor from Honeycomb should be +| | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\ +| | and compares with neighbor list supplied in argument. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - neighbors - list of ipv4 neighbor dictionaries. Type: list +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv4 neighbor from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \| +| | [Arguments] | ${node} | ${interface} | @{neighbors} +| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | ${data_neighbors}= | Set Variable | ${api_data['ietf-ip:ipv4']['neighbor']} +| | Compare data structures +| | ... | ${data_neighbors} | ${neighbors} | list_order=${False} +| | Should be equal | ${neighbor['fib_address']} +| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']} +| | Should be equal | ${neighbor['fib_mac']} +| | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['link-layer-address']} + +| Honeycomb clears all interface ipv4 neighbors +| | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ +| | ... | specified interface. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb clears all interface ipv4 neighbors \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | interfaceAPI.clear all ipv4 neighbors | ${node} | ${interface} + +| Honeycomb sets interface ipv6 address +| | [Documentation] | Uses Honeycomb API to change ipv6 address\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* @@ -268,27 +282,17 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of subnet prefix to set. Type: string -| | ... | - fib_address - IP address to add to fib table. Type: string -| | ... | - fib_mac - MAC address to add to fib table. Type: string -| | ... | - settings - ipv6 interface settings. Type: dictionary | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface ipv6 configuration \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \ -| | ... | \| 10::11 \| 08:00:27:c0:5d:37 \| ${{'enabled': True, 'mtu': 1500}} \| +| | ... | \| Honeycomb sets interface ipv6 address \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} -| | ... | ${fib_address} | ${fib_mac} | ${settings} | | interfaceAPI.Add first ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| | interfaceAPI.Add first ipv6 neighbor -| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} -| | :FOR | ${key} | IN | @{settings.keys()} -| | | interfaceAPI.Configure interface ipv6 -| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']} -| IPv6 config from Honeycomb should be -| | [Documentation] | Retrieves interface ipv6 configuration through Honeycomb\ +| IPv6 address from Honeycomb should be +| | [Documentation] | Retrieves interface ipv6 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* @@ -296,32 +300,21 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - length of subnet prefix to expect. Type: string -| | ... | - fib_address - IP address to expect in fib table. Type: string -| | ... | - fib_mac - MAC address to expect in fib table. Type: string -| | ... | - settings - ipv6 interface settings to expect. Type: dictionary | | ... | | ... | *Example:* | | ... -| | ... | \| IPv6 config from Honeycomb should be \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \ -| | ... | \| 10::11 \| 08:00:27:c0:5d:37 \| ${{'enabled': True, 'mtu': 1500}} \| +| | ... | \| IPv6 address from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} -| | ... | ${fib_address} | ${fib_mac} | ${settings} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be equal | ${address} | | ... | ${api_data['ietf-ip:ipv6']['address'][0]['ip']} | | Should be equal | ${prefix} | | ... | ${api_data['ietf-ip:ipv6']['address'][0]['prefix-length']} | | Should be equal | ${fib_address} -| | ... | ${api_data['ietf-ip:ipv6']['neighbor'][0]['ip'] -| | Should be equal | ${fib_mac} -| | ... | ${api_data['ietf-ip:ipv6']['neighbor'][0]['link-layer-address'] -| | :FOR | ${key} | IN | @{settings.keys()} -| | | Should be equal -| | ... | ${settings['{key']} | ${api_data['ietf-ip:ipv6']['{$key}']} -| IPv6 config from VAT should be -| | [Documentation] | Retrieves interface ipv6 configuration through VAT and\ +| IPv6 address from VAT should be +| | [Documentation] | Retrieves interface ipv6 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* @@ -332,7 +325,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| IPv6 config from VAT should be \| ${nodes['DUT1']} \ +| | ... | \| IPv6 address from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses |