diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/interfaces.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/interfaces.robot | 76 |
1 files changed, 38 insertions, 38 deletions
diff --git a/resources/libraries/robot/honeycomb/interfaces.robot b/resources/libraries/robot/honeycomb/interfaces.robot index 3eef9f1b2d..95c6ece277 100644 --- a/resources/libraries/robot/honeycomb/interfaces.robot +++ b/resources/libraries/robot/honeycomb/interfaces.robot @@ -20,7 +20,7 @@ | Library | resources.libraries.python.TrafficScriptExecutor *** Keywords *** -| Honeycomb sets interface state +| Honeycomb configures interface state | | [Documentation] | Uses Honeycomb API to change the admin state\ | | ... | of the specified interface. | | ... @@ -31,7 +31,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface state \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb configures interface state \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | interfaceAPI.Set interface state | ${node} | ${interface} | ${state} @@ -76,7 +76,7 @@ | | ... | ${vat_data['admin_up_down']} == 1 | up | down | | Should be equal | ${vat_state} | ${state} -| Honeycomb sets interface ipv4 address +| Honeycomb sets interface IPv4 address | | [Documentation] | Uses Honeycomb API to change ipv4 address\ | | ... | of the specified interface. Any existing addresses will be removed. | | ... @@ -88,13 +88,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface ipv4 address \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb sets interface IPv4 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${netmask} -| Honeycomb sets interface ipv4 address with prefix +| Honeycomb sets interface IPv4 address with prefix | | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\ | | ... | specified interface. Any existing addresses will be removed. | | ... @@ -106,13 +106,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface ipv4 address with prefix \ +| | ... | \| Honeycomb sets interface IPv4 address with prefix \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| Honeycomb adds interface ipv4 address +| Honeycomb adds interface IPv4 address | | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\ | | ... | specified interface, without removing existing addresses. | | ... @@ -124,13 +124,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds interface ipv4 address \ +| | ... | \| Honeycomb adds interface IPv4 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| Honeycomb fails to add interface ipv4 address +| Honeycomb fails to add interface IPv4 address | | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\ | | ... | specified interface, and expects to fail with code 500. | | ... @@ -142,11 +142,11 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb fails to add interface ipv4 address \ +| | ... | \| Honeycomb fails to add interface IPv4 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | Run Keyword and Expect Error | *not successful. Status code: 500. -| | ... | Honeycomb adds interface ipv4 address +| | ... | Honeycomb adds interface IPv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv4 address from Honeycomb should be @@ -191,7 +191,7 @@ | | ... | ip=${address} | netmask=${netmask} | prefix_length=${prefix} | | Should contain | ${vpp_data} | ${settings} -| Honeycomb removes interface ipv4 addresses +| Honeycomb removes interface IPv4 addresses | | [Documentation] | Removes all configured ipv4 addresses from the specified\ | | ... | interface. | | ... @@ -201,7 +201,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb removes interface ipv4 addresses \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb removes interface IPv4 addresses \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Remove all ipv4 addresses | ${node} | ${interface} @@ -240,7 +240,7 @@ | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 -| Honeycomb adds interface ipv4 neighbor +| Honeycomb adds interface IPv4 neighbor | | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ | | ... | specified interface. | | ... @@ -252,7 +252,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds interface ipv4 neighbor \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds interface IPv4 neighbor \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ | | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | interfaceAPI.Add ipv4 neighbor @@ -278,7 +278,7 @@ | | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static | | Should contain | ${api_data['ietf-ip:ipv4']['neighbor']} | ${settings} -| Honeycomb clears all interface ipv4 neighbors +| Honeycomb clears all interface IPv4 neighbors | | [Documentation] | Uses Honeycomb API to remove all ipv4 neighbors from the\ | | ... | specified interface. | | ... @@ -288,7 +288,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb clears all interface ipv4 neighbors \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb clears all interface IPv4 neighbors \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | interfaceAPI.Remove all ipv4 neighbors | ${node} | ${interface} @@ -310,7 +310,7 @@ | | Run keyword and expect error | *KeyError:* | | ... | Set Variable | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']} -| Honeycomb sets interface ipv6 address +| Honeycomb sets interface IPv6 address | | [Documentation] | Uses Honeycomb API to change ipv6 address\ | | ... | of the specified interface. Existing IPv6 addresses will be removed,\ | | ... | with the exception of self-configured link-layer IPv6. @@ -323,13 +323,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface ipv6 address \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb sets interface IPv6 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| Honeycomb adds interface ipv6 address +| Honeycomb adds interface IPv6 address | | [Documentation] | Uses Honeycomb API to add an ipv6 address\ | | ... | to the specified interface. | | ... @@ -341,13 +341,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds interface ipv6 address \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds interface IPv6 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} -| Honeycomb fails to add interface ipv6 address +| Honeycomb fails to add interface IPv6 address | | [Documentation] | Uses Honeycomb API to add an ipv6 address to the\ | | ... | specified interface, and expects to fail with code 500. | | ... @@ -359,11 +359,11 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb fails to add interface ipv6 address \ +| | ... | \| Honeycomb fails to add interface IPv6 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | Run Keyword and Expect Error | *not successful. Status code: 500. -| | ... | Honeycomb adds interface ipv6 address +| | ... | Honeycomb adds interface IPv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv6 address from Honeycomb should contain @@ -407,7 +407,7 @@ | | ... | ip=${address} | prefix_length=${prefix} | | Should contain | ${vpp_data} | ${settings} -| Honeycomb removes interface ipv6 addresses +| Honeycomb removes interface IPv6 addresses | | [Documentation] | Removes all configured ipv6 addresses from the specified\ | | ... | interface. | | ... @@ -417,7 +417,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb removes interface ipv6 addresses \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb removes interface IPv6 addresses \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Remove all ipv6 addresses | ${node} | ${interface} @@ -456,7 +456,7 @@ | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv6 -| Honeycomb adds interface ipv6 neighbor +| Honeycomb adds interface IPv6 neighbor | | [Documentation] | Uses Honeycomb API to assign an ipv6 neighbor to the\ | | ... | specified interface. | | ... @@ -468,7 +468,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb adds interface ipv6 neighbor \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb adds interface IPv6 neighbor \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \| | | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | InterfaceAPI.Add ipv6 neighbor @@ -494,7 +494,7 @@ | | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static | | Should contain | ${api_data['ietf-ip:ipv6']['neighbor']} | ${settings} -| Honeycomb clears all interface ipv6 neighbors +| Honeycomb clears all interface IPv6 neighbors | | [Documentation] | Uses Honeycomb API to remove all ipv6 neighbors from the\ | | ... | specified interface. | | ... @@ -504,7 +504,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb clears all interface ipv6 neighbors \| ${nodes['DUT1']} \ +| | ... | \| Honeycomb clears all interface IPv6 neighbors \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | interfaceAPI.Remove all ipv6 neighbors | ${node} | ${interface} @@ -581,7 +581,7 @@ | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | Should be equal | ${vat_data['mtu']} | ${mtu} -| Honeycomb sets interface vrf ID +| Honeycomb sets interface VRF ID | | [Documentation] | Uses Honeycomb API to change interface vrf\ | | ... | configuration. | | ... @@ -592,13 +592,13 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Honeycomb sets interface vrf ID \ +| | ... | \| Honeycomb sets interface VRF ID \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| ipv4 \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version} | | interfaceAPI.Configure interface routing | | ... | ${node} | ${interface} | ${ip_version}-vrf-id | ${vrf_id} -| Interface vrf ID from Honeycomb should be +| Interface VRF ID from Honeycomb should be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through Honeycomb and compares with settings supplied in arguments. | | ... @@ -610,7 +610,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Interface vrf ID from Honeycomb should be \ +| | ... | \| Interface VRF ID from Honeycomb should be \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| ipv4 \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version} @@ -618,7 +618,7 @@ | | Should be equal | | ... | ${api_data['v3po:routing']['${ip_version}-vrf-id']} | ${vrf_id} -| Interface vrf ID from VAT should be +| Interface VRF ID from VAT should be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through VAT and compares with settings supplied in arguments. | | ... @@ -629,7 +629,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Interface vrf ID from VAT should be \ +| | ... | \| Interface VRF ID from VAT should be \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | | ${vat_data}= | InterfaceCLI.get interface vrf table @@ -692,7 +692,7 @@ | | Should be equal as strings | | ... | ${api_data['if-index']} | ${sw_if_index} -| Get Interface index from oper data +| Get interface index from oper data | | [Documentation] | Retrieves interface operational data and returns\ | | ... | if-index of the specified interface. | | ... @@ -702,7 +702,7 @@ | | ... | | ... | *Example:* | | ... -| | ... | \| Get Interface index from oper data \| ${nodes['DUT1']} \| local0 \| +| | ... | \| Get interface index from oper data \| ${nodes['DUT1']} \| local0 \| | | [Arguments] | ${node} | ${interface} | | ${data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Return from keyword | ${data['if-index']} |