diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/l2_fib.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/l2_fib.robot | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/l2_fib.robot b/resources/libraries/robot/honeycomb/l2_fib.robot new file mode 100644 index 0000000000..e63f299d11 --- /dev/null +++ b/resources/libraries/robot/honeycomb/l2_fib.robot @@ -0,0 +1,187 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.L2Util +| Library | resources.libraries.python.honeycomb.HcAPIKwBridgeDomain.BridgeDomainKeywords +| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords +| ... | WITH NAME | InterfaceAPI + +*** Keywords *** +| Honeycomb adds L2 FIB entry to bridge domain +| | [Documentation] | Add L2 FIB entry to the specified bridge domain using \ +| | ... | Honyecomb API. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... | - l2_fib_settings - The parameters of the new L2 FIB entry. \ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb adds L2 FIB entry to bridge domain \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_cfg} \| +| | ... +| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_settings} +| | ... +| | Add L2 FIB Entry | ${node} | ${bd_name} | ${l2_fib_settings} + +| L2 FIB Table from Honeycomb should be empty +| | [Documentation] | Check if the L2 FIB table in the specified bridge domain \ +| | ... | is empty. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... +| | ... | *Example:* +| | ... | \| L2 FIB Table from Honeycomb should be empty \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| +| | ... +| | [Arguments] | ${node} | ${bd_name} +| | ... +| | ${l2_fib_data}= | Get All L2 FIB Entries | ${node} | ${bd_name} +| | Should be empty | ${l2_fib_data} + +| L2 FIB Entry from Honeycomb should be +| | [Documentation] | Retrieves the operational data about the specified L2 \ +| | ... | FIB entry and checks if they are as expected. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... | - l2_fib_ref_data - L2 FIB entry referential data. Type: dictionay +| | ... +| | ... | *Example:* +| | ... | \| L2 FIB Entry from Honeycomb should be \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_oper} \| +| | ... +| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_ref_data} +| | ... +| | ${l2_fib_data}= | Get L2 FIB Entry | ${node} | ${bd_name} +| | ... | ${l2_fib_ref_data['phys-address']} +| | interfaceAPI.Compare Data Structures | ${l2_fib_data} | ${l2_fib_ref_data} + +| Honeycomb removes L2 FIB entry +| | [Documentation] | Remove the specified L2 FIB entry from the bridge \ +| | ... | domain's L2 FIB table. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... | - mac - MAC address used as the key in L2 FIB data structure. \ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb removes L2 FIB entry \ +| | ... | \| ${nodes['DUT1']} \| test_bd \ +| | ... | \| ${l2_fib_forward_oper['phys-address']} \| +| | ... +| | [Arguments] | ${node} | ${bd_name} | ${mac} +| | ... +| | Remove L2 FIB Entry | ${node} | ${bd_name} | ${mac} + +| Honeycomb removes all L2 FIB entries +| | [Documentation] | Remove all L2 FIB enties from the bridge domain's L2 FIB \ +| | ... | table. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb removes all L2 FIB entries \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| +| | ... +| | [Arguments] | ${node} | ${bd_name} +| | ... +| | Remove all L2 FIB entries | ${node} | ${bd_name} + +| Honeycomb fails to add wrong L2 FIB entry +| | [Documentation] | Honeycomb tries to add a wrong L2 FIB entry and expects \ +| | ... | that it fails. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... | - l2_fib_settings - The wrong parameters of the new L2 FIB entry. \ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb fails to add wrong L2 FIB entry \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_wrong_cfg} \| +| | ... +| | [Arguments] | ${node} | ${bd_name} | ${l2_fib_settings} +| | ... +| | Run keyword and expect error | *HoneycombError: * was not successful. *00. +| | ... | Add L2 FIB Entry | ${node} | ${bd_name} | ${l2_fib_settings} + +| Honeycomb fails to modify L2 FIB entry +| | [Documentation] | Honeycomb tries to modify an existing L2 FIB entry and \ +| | ... | expects to fail. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_name - Name of the bridge domain. Type: string +| | ... | - mac - MAC address used as the key in L2 FIB data structure. \ +| | ... | Type: string +| | ... | - param - The parameter to be modified. Type: string +| | ... | - value - The new value of the parameter. Type: string or integer +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb fails to modify L2 FIB entry \ +| | ... | \| ${nodes['DUT1']} \| test_bd \ +| | ... | \| ${l2_fib_forward_oper['phys-address']} \| action \ +| | ... | \| l2-fib-forward \| +| | ... +| | [Arguments] | ${node} | ${bd_name} | ${mac} | ${param} | ${value} +| | ... +| | Run keyword and expect error | *HoneycombError: * was not successful. *00. +| | ... | Modify L2 FIB Entry +| | ... | ${node} | ${bd_name} | ${mac} | ${param} | ${value} + +| L2 FIB entry from VAT should be +| | [Documentation] | Retrieves the operational data about the specified L2 \ +| | ... | FIB entry using VAT and checks if it is as expected. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_index - Index of the bridge domain. Type: integer +| | ... | - l2_fib_ref_data - L2 FIB entry referential data. Type: dictionay +| | ... +| | ... | *Example:* +| | ... | \| L2 FIB entry from VAT should be \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| ${l2_fib_forward_oper} \| +| | ... +| | [Arguments] | ${node} | ${bd_index} | ${l2_fib_ref_data} +| | ... +| | ${l2_fib_data}= | Get L2 FIB entry VAT | ${node} | ${bd_index} +| | ... | ${l2_fib_ref_data['mac']} +| | interfaceAPI.Compare Data Structures | ${l2_fib_data} | ${l2_fib_ref_data} + +| L2 FIB Table from VAT should be empty +| | [Documentation] | Check if the L2 FIB table in the specified bridge domain \ +| | ... | is empty. VAT is used to get operational data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - bd_index - Index of the bridge domain. Type: integer +| | ... +| | ... | *Example:* +| | ... | \| L2 FIB Table from VAT should be empty \ +| | ... | \| ${nodes['DUT1']} \| test_bd \| +| | ... +| | [Arguments] | ${node} | ${bd_index} +| | ... +| | ${l2_fib_data}= | Get L2 FIB table VAT | ${node} | ${bd_index} +| | Should be empty | ${l2_fib_data} |