diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/lisp_gpe.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/lisp_gpe.robot | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/resources/libraries/robot/honeycomb/lisp_gpe.robot b/resources/libraries/robot/honeycomb/lisp_gpe.robot deleted file mode 100644 index 2b265c83c6..0000000000 --- a/resources/libraries/robot/honeycomb/lisp_gpe.robot +++ /dev/null @@ -1,252 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.Lisp.LispGPEKeywords -| Library | resources.libraries.python.LispUtil -| Documentation | Keywords used to test Honeycomb Lisp GPE features. - -*** Keywords *** -| Honeycomb enables LISP GPE -| | [Documentation] | Uses Honeycomb API to enable LISP GPE. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb enables LISP GPE \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ... -| | Set LISPGPE state | ${node} | ${TRUE} - -| Honeycomb disables LISP GPE -| | [Documentation] | Uses Honeycomb API to disable LISP GPE. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb disables LISP GPE \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ... -| | Set LISPGPE state | ${node} | ${FALSE} - -| Honeycomb adds first LISP GPE Mapping -| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. Removes -| | ... | any existing mappings. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - data - LISP settings to use. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb adds first LISP GPE Mapping \| ${nodes['DUT1']} \ -| | ... | \| ${data} \| -| | ... -| | [Arguments] | ${node} | ${data} -| | ... -| | Configure LISPGPE Mapping | ${node} | ${data} - -| Honeycomb adds LISP GPE Mapping -| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - data - LISP settings to use. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb adds LISP GPE Mapping \| ${nodes['DUT1']} \| ${data} \| -| | ... -| | [Arguments] | ${node} | ${data} -| | ... -| | Add LISPGPE Mapping | ${node} | ${data['id']} | ${data} - -| Honeycomb removes LISP GPE mapping -| | [Documentation] | Uses Honeycomb API to remove the specified mapping. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes LISP GPE mapping \| ${nodes['DUT1']} \ -| | ... | \| map_name \| -| | ... -| | [Arguments] | ${node} | ${mapping} -| | ... -| | Delete LISPGPE mapping | ${node} | ${mapping} - -| LISP GPE should not be configured -| | [Documentation] | Retrieves LISP GPE configuration from Honeycomb operational\ -| | ... | data, and expects an empty dictionary. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| LISP GPE should not be configured \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ... -| | ${data}= | Get LISP GPE operational data | ${node} -| | Should be Equal -| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${FALSE} - -| LISP GPE state from Honeycomb should be -| | [Documentation] | Retrieves LISP GPE state from Honeycomb operational\ -| | ... | data, and compares LISP state with expected value. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - state - Expected LISP state. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| LISP GPE state from Honeycomb should be \| ${nodes['DUT1']} \ -| | ... | \| enabled \| -| | ... -| | [Arguments] | ${node} | ${state} -| | ... -| | ${data}= | Get LISPGPE operational data | ${node} -| | Run keyword if | $state == 'enabled' -| | ... | Should be equal as strings -| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${True} -| | Run keyword if | $state == 'disabled' -| | ... | Should be equal as strings -| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${False} - -| LISP GPE state from VAT should be -| | [Documentation] | Retrieves LISP state from VAT,\ -| | ... | and compares LISP state with expected value. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - state - Expected LISP state. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| LISP state from VAT should be \| ${nodes['DUT1']} \| enabled \| -| | ... -| | [Arguments] | ${node} | ${state} -| | ... -| | ${status}= | VPP show LISP State | ${node} -| | Should match | ${status['gpe_status']} | ${state} - -| LISP GPE mapping from Honeycomb should be -| | [Documentation] | Retrieves LISP GPE mapping from Honeycomb operational\ -| | ... | data, and compares with expected data. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - settings - Expected LISP mapping data. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| LISP GPE mapping from Honeycomb should be \| ${nodes['DUT1']} \ -| | ... | \| ${settings} \| -| | ... -| | [Arguments] | ${node} | ${settings} -| | ... -| | ${data}= | Get LISPGPE mapping | ${node} | ${settings['id']} -| | Compare data structures | ${data} | ${settings} - -| LISP GPE mappings from Honeycomb should not exist -| | [Documentation] | Retrieves LISP GPE mappings from operational\ -| | ... | data, and expects to find none. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| LISP GPE mappings from Honeycomb should not exist \ -| | ... | \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ... -| | ${data}= | Get LISPGPE operational data | ${node} -| | Variable Should Not Exist -| | ... | ${data['gpe-state']['gpe-feature-data']['gpe-entry']} - -| Honeycomb disables all LISP GPE features -| | [Documentation] | Uses Honeycomb API to remove all LISP GPE configuration. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb disables all LISP GPE features \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | ... -| | Disable LISPGPE | ${node} - -| Send packet and verify LISP GPE encap -| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ -| | ... | a LISP-GPE encapsulated packet on the other interface. -| | ... -| | ... | *Arguments:* -| | ... -| | ... | _NOTE:_ Arguments are based on topology: -| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) -| | ... -| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary -| | ... | - src_ip - IP of source interface (TG-if1). Type: string -| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string -| | ... | - tx_src_port - Interface of TG-if1. Type: string -| | ... | - tx_src_mac - MAC address of TG-if1. Type: string -| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string -| | ... | - rx_port - Interface of TG-if1. Type: string -| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string -| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string -| | ... | - src_rloc - configured RLOC source address. Type: string -| | ... | - dst_rloc - configured RLOC destination address. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ -| | ... | \| 10.0.0.1 \| 32.0.0.1 \| -| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ -| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ -| | ... | \| 10.0.1.1 \| 10.0.1.2 \| -| | ... -| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | -| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} -| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} -| | ... -| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} -| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} -| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac -| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac -| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} -| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} -| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} -| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node} -| | ... | ${args} - -| LISPGPE Functional Traffic Test Teardown -| | [Documentation] | Teardown for LISP GPE functional traffic test. -| | Show Packet Trace on all DUTs | ${nodes} -| | VPP Show LISP EID Table | ${node} -| | Disable LISPGPE | ${node} |