diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/lisp_gpe.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/lisp_gpe.robot | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/lisp_gpe.robot b/resources/libraries/robot/honeycomb/lisp_gpe.robot new file mode 100644 index 0000000000..2b265c83c6 --- /dev/null +++ b/resources/libraries/robot/honeycomb/lisp_gpe.robot @@ -0,0 +1,252 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.Lisp.LispGPEKeywords +| Library | resources.libraries.python.LispUtil +| Documentation | Keywords used to test Honeycomb Lisp GPE features. + +*** Keywords *** +| Honeycomb enables LISP GPE +| | [Documentation] | Uses Honeycomb API to enable LISP GPE. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb enables LISP GPE \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Set LISPGPE state | ${node} | ${TRUE} + +| Honeycomb disables LISP GPE +| | [Documentation] | Uses Honeycomb API to disable LISP GPE. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb disables LISP GPE \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Set LISPGPE state | ${node} | ${FALSE} + +| Honeycomb adds first LISP GPE Mapping +| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. Removes +| | ... | any existing mappings. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - data - LISP settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds first LISP GPE Mapping \| ${nodes['DUT1']} \ +| | ... | \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${data} +| | ... +| | Configure LISPGPE Mapping | ${node} | ${data} + +| Honeycomb adds LISP GPE Mapping +| | [Documentation] | Uses Honeycomb API to configure a LISP mapping. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - data - LISP settings to use. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds LISP GPE Mapping \| ${nodes['DUT1']} \| ${data} \| +| | ... +| | [Arguments] | ${node} | ${data} +| | ... +| | Add LISPGPE Mapping | ${node} | ${data['id']} | ${data} + +| Honeycomb removes LISP GPE mapping +| | [Documentation] | Uses Honeycomb API to remove the specified mapping. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes LISP GPE mapping \| ${nodes['DUT1']} \ +| | ... | \| map_name \| +| | ... +| | [Arguments] | ${node} | ${mapping} +| | ... +| | Delete LISPGPE mapping | ${node} | ${mapping} + +| LISP GPE should not be configured +| | [Documentation] | Retrieves LISP GPE configuration from Honeycomb operational\ +| | ... | data, and expects an empty dictionary. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE should not be configured \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | ${data}= | Get LISP GPE operational data | ${node} +| | Should be Equal +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${FALSE} + +| LISP GPE state from Honeycomb should be +| | [Documentation] | Retrieves LISP GPE state from Honeycomb operational\ +| | ... | data, and compares LISP state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected LISP state. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE state from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| enabled \| +| | ... +| | [Arguments] | ${node} | ${state} +| | ... +| | ${data}= | Get LISPGPE operational data | ${node} +| | Run keyword if | $state == 'enabled' +| | ... | Should be equal as strings +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${True} +| | Run keyword if | $state == 'disabled' +| | ... | Should be equal as strings +| | ... | ${data['gpe-state']['gpe-feature-data']['enable']} | ${False} + +| LISP GPE state from VAT should be +| | [Documentation] | Retrieves LISP state from VAT,\ +| | ... | and compares LISP state with expected value. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - state - Expected LISP state. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP state from VAT should be \| ${nodes['DUT1']} \| enabled \| +| | ... +| | [Arguments] | ${node} | ${state} +| | ... +| | ${status}= | VPP show LISP State | ${node} +| | Should match | ${status['gpe_status']} | ${state} + +| LISP GPE mapping from Honeycomb should be +| | [Documentation] | Retrieves LISP GPE mapping from Honeycomb operational\ +| | ... | data, and compares with expected data. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... | - settings - Expected LISP mapping data. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE mapping from Honeycomb should be \| ${nodes['DUT1']} \ +| | ... | \| ${settings} \| +| | ... +| | [Arguments] | ${node} | ${settings} +| | ... +| | ${data}= | Get LISPGPE mapping | ${node} | ${settings['id']} +| | Compare data structures | ${data} | ${settings} + +| LISP GPE mappings from Honeycomb should not exist +| | [Documentation] | Retrieves LISP GPE mappings from operational\ +| | ... | data, and expects to find none. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| LISP GPE mappings from Honeycomb should not exist \ +| | ... | \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | ${data}= | Get LISPGPE operational data | ${node} +| | Variable Should Not Exist +| | ... | ${data['gpe-state']['gpe-feature-data']['gpe-entry']} + +| Honeycomb disables all LISP GPE features +| | [Documentation] | Uses Honeycomb API to remove all LISP GPE configuration. +| | ... +| | ... | *Arguments:* +| | ... | - node - Information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb disables all LISP GPE features \| ${nodes['DUT1']} \| +| | ... +| | [Arguments] | ${node} +| | ... +| | Disable LISPGPE | ${node} + +| Send packet and verify LISP GPE encap +| | [Documentation] | Send ICMP packet to DUT out one interface and receive\ +| | ... | a LISP-GPE encapsulated packet on the other interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: string +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string +| | ... | - tx_src_port - Interface of TG-if1. Type: string +| | ... | - tx_src_mac - MAC address of TG-if1. Type: string +| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string +| | ... | - rx_port - Interface of TG-if1. Type: string +| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string +| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string +| | ... | - src_rloc - configured RLOC source address. Type: string +| | ... | - dst_rloc - configured RLOC destination address. Type: string +| | ... +| | ... | *Return:* +| | ... | - No value returned +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \ +| | ... | \| 10.0.0.1 \| 32.0.0.1 \| +| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \ +| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \ +| | ... | \| 10.0.1.1 \| 10.0.1.2 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} | +| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac} +| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} +| | ... +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac +| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac +| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name} +| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc} +| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node} +| | ... | ${args} + +| LISPGPE Functional Traffic Test Teardown +| | [Documentation] | Teardown for LISP GPE functional traffic test. +| | Show Packet Trace on all DUTs | ${nodes} +| | VPP Show LISP EID Table | ${node} +| | Disable LISPGPE | ${node} |