diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/persistence.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/persistence.robot | 332 |
1 files changed, 0 insertions, 332 deletions
diff --git a/resources/libraries/robot/honeycomb/persistence.robot b/resources/libraries/robot/honeycomb/persistence.robot deleted file mode 100644 index bc2b167f28..0000000000 --- a/resources/libraries/robot/honeycomb/persistence.robot +++ /dev/null @@ -1,332 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords -| Library | resources.libraries.python.honeycomb.HcPersistence -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/vxlan.robot -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Resource | resources/libraries/robot/honeycomb/tap.robot -| Resource | resources/libraries/robot/honeycomb/vhost_user.robot -| Resource | resources/libraries/robot/honeycomb/sub_interface.robot -| Variables | resources/test_data/honeycomb/persistence.py | ${interface} -| Documentation | Keywords used to test Honeycomb persistence. - -*** Keywords *** -| Restart Honeycomb -| | [Documentation] | Restarts Honeycomb without clearing persistence data. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart Honeycomb \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Log Persisted Configuration | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Restart VPP -| | [Documentation] | Restarts VPP and waits until it reconnects with Honeycomb. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart VPP \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Check VPP connection | ${node} - -| Check VPP connection -| | [Documentation] | Checks if Honeycomb is connected to VPP by reading VPP\ -| | ... | version number from Honeycomb operational data. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Check VPP connection \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Wait until keyword succeeds | 2min | 20sec -| | ... | Check Honeycomb startup state | ${node} - -| Restart Honeycomb and VPP in pesistence test -| | [Documentation] | Stops Honeycomb, restarts VPP and then starts Honeycomb\ -| | ... | again. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Log Persisted Configuration | ${node} -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Multi-Feature Persistence Test Configuration -| | [Documentation] | Uses Honeycomb to set basic settings for VxLAN,\ -| | ... | bridge domains, TAP, vhost-user and VLAN. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Multi-Feature Persistence Test Configuration \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | Honeycomb sets interface VxLAN configuration -| | ... | ${node} | ${vx_interface} | ${vxlan_settings} -| | Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Honeycomb creates TAP interface -| | ... | ${node} | ${tap_interface} | ${tap_settings} -| | Honeycomb creates vhost-user interface -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | Honeycomb creates sub-interface | ${node} | ${interface} -| | ... | ${sub_if_1_match} | ${sub_if_1_tags} | ${sub_if_1_settings} -| | Honeycomb configures interface state | ${node} | ${interface} | up -| | Honeycomb sets the sub-interface up -| | ... | ${node} | ${interface} | ${sub_if_id} -| | Honeycomb adds sub-interface to bridge domain -| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_bd_settings} -| | Honeycomb configures tag rewrite -| | ... | ${node} | ${interface} | ${sub_if_id} | ${tag_rewrite_pop_1} - -| Multi-Feature persistence Test Verification -| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\ -| | ... | bridge domains, TAP, vhost-user and VLAN. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Multi-Feature persistence Test Verification \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | VxLAN Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vx_interface} | ${vxlan_settings} -| | VxLAN Operational Data From VAT Should Be -| | ... | ${node} | ${vxlan_settings} -| | Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | TAP Operational Data From Honeycomb Should Be -| | ... | ${node} | ${tap_interface} | ${tap_settings_oper} -| | TAP Operational Data From VAT Should Be -| | ... | ${node} | ${tap_interface_vat} | ${tap_settings_vat} -| | Vhost-user Operational Data From Honeycomb Should Be -| | ... | ${node} | ${vhost_interface} | ${vhost_user_client} -| | Vhost-user Operational Data From VAT Should Be -| | ... | ${node} | ${vhost_user_client} -| | Sub-interface Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_if_1_oper} -| | Sub-interface Operational Data From VAT Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_if_1_oper} -| | Interface state from Honeycomb should be | ${node} | ${interface} | up -| | Interface state from VAT should be | ${node} | ${interface} | up -| | Sub-interface bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${interface} | ${sub_if_id} | ${sub_bd_settings} -| | Sub-interface bridge domain Operational Data From PAPI Should Be -| | ... | ${node} | ${sub_if_name} | ${sub_bd_settings} -| | Rewrite tag from Honeycomb should be -| | ... | ${node} | ${interface} | ${sub_if_id} | ${tag_rewrite_pop_1_oper} -| | Rewrite tag from VAT should be -| | ... | ${node} | ${sub_if_name} | ${tag_rewrite_pop_1_VAT} -| | ${data_conf}= | Get all interfaces cfg data | ${node} -| | ${data_oper}= | Get all interfaces oper data | ${node} -| | Compare interface lists | ${data_conf} | ${data_oper} - -| Honeycomb and VPP should have default configuration -| | [Documentation] | Uses Honeycomb and VAT to verify settings for VxLAN,\ -| | ... | bridge domains, TAP, vhost-user and VLAN. Expects default\ -| | ... | configuration. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb and VPP should have default configuration \| -| | ... | ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | VxLAN Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vx_interface} -| | VxLAN Operational Data From VAT Should Be empty | ${node} -| | Honeycomb should show no bridge domains | ${node} -| | PAPI should show no bridge domains | ${node} -| | TAP Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${tap_interface} -| | TAP Operational Data From VAT Should Be empty -| | ... | ${node} | ${tap_interface} -| | Vhost-user Operational Data From Honeycomb Should Be empty -| | ... | ${node} | ${vhost_interface} -| | Vhost-user Operational Data From VAT Should Be empty -| | ... | ${node} -| | interface state from Honeycomb should be -| | ... | ${node} | ${interface} | down -| | And interface state from VAT should be -| | ... | ${node} | ${interface} | down - -| Persistence file is damaged during restart -| | [Documentation] | Shuts down Honeycomb, modifies persistence files to\ -| | ... | simulate damage, then restarts VPP and starts up Honeycomb again. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Persistence file is damaged during restart \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Stop Honeycomb service on DUTs | ${node} -| | Modify persistence files | ${node} | { | abc -| | Restart Vpp Service | ${node} -| | Verify Vpp | ${node} -| | VPP Enable Traces On DUT | ${node} -| | Configure Honeycomb service on DUTs | ${node} - -| Log persisted configuration on node -| | [Documentation] | Logs the content of Honeycomb's persitence files. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Log persisted configuration on node \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Log persisted configuration | ${node} - -| Interface Persistence Setup -| | [Documentation] | Configure interface state, ipv4 and ipv6 addresses -| | ... | and neighbors. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Interface Persistence Setup \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Honeycomb and VPP should have default configuration | ${node} -| | Import Variables | resources/test_data/honeycomb/interface_ip.py -| | Honeycomb configures interface state | ${node} | ${interface} | up -| | Honeycomb sets interface IPv4 address with prefix -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | Honeycomb adds interface IPv4 neighbor -| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac} -| | Honeycomb sets interface IPv6 address -| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix} -| | Honeycomb adds interface IPv6 neighbor -| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac} - -| Interface Persistence Check -| | [Documentation] | Verify interface state, ipv4 and ipv6 addresses -| | ... | and neighbors. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Interface Persistence Check \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Interface state from Honeycomb should be | ${node} | ${interface} | up -| | IPv4 address from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix} -| | IPv4 address from VAT should be -| | ... | ${node} | ${interface} | ${ipv4_address} -| | ... | ${ipv4_prefix} | ${ipv4_mask} -| | IPv4 neighbor from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac} -| | IPv6 address from Honeycomb should contain -| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix} -| | IPv6 address from VAT should contain -| | ... | ${node} | ${interface} | ${ipv6_address} -| | ... | ${ipv6_prefix} | ${ipv6_mask} -| | IPv6 neighbor from Honeycomb should be -| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac} - -| Bridge Domain Persistence Setup -| | [Documentation] | Configure bridge domain, BD interface assignment -| | ... | and L2 fib entry. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Bridge Domain Persistence Setup \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Honeycomb and VPP should have default configuration | ${node} -| | Import Variables | resources/test_data/honeycomb/l2_fib.py -| | ... | ${node} | ${interface} | ${interface} -| | Honeycomb creates first l2 bridge domain -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Honeycomb adds interface to bridge domain -| | ... | ${node} | ${interface} | ${bd_name} | ${if_bd_settings} -| | Honeycomb adds L2 FIB entry to bridge domain -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_cfg} - -| Bridge Domain Persistence Check -| | [Documentation] | Verify bridge domain, BD interface assignment -| | ... | and L2 fib entry. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Bridge Domain Persistence Check \| ${nodes['DUT1']} \| -| | ... -| | [Arguments] | ${node} -| | Bridge domain Operational Data From Honeycomb Should Be -| | ... | ${node} | ${bd_name} | ${bd_settings} -| | Bridge domain Operational Data From VAT Should Be -| | ... | ${node} | ${0} | ${bd_settings} -| | Bridge domain Operational Interface Assignment should be -| | ... | ${node} | ${interface} | ${if_bd_settings} -| | L2 FIB Entry from Honeycomb should be -| | ... | ${node} | ${bd_name} | ${l2_fib_forward_oper} -| | L2 FIB entry from PAPI should be -| | ... | ${node} | ${bd_index} | ${l2_fib_forward_vat}
\ No newline at end of file |