aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/honeycomb/policer.robot
diff options
context:
space:
mode:
Diffstat (limited to 'resources/libraries/robot/honeycomb/policer.robot')
-rw-r--r--resources/libraries/robot/honeycomb/policer.robot162
1 files changed, 0 insertions, 162 deletions
diff --git a/resources/libraries/robot/honeycomb/policer.robot b/resources/libraries/robot/honeycomb/policer.robot
deleted file mode 100644
index 87b97470ac..0000000000
--- a/resources/libraries/robot/honeycomb/policer.robot
+++ /dev/null
@@ -1,162 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords
-| Variables | resources/test_data/honeycomb/policer_variables.py
-| Documentation | Keywords used to test Policer using Honeycomb.
-
-*** Keywords ***
-| Honeycomb Configures Policer
-| | [Documentation] | Uses Honeycomb API to configure Policer on the specified\
-| | ... | interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - policer_data - data needed to configure Policer. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb Configures Policer \| ${node} \
-| | ... | \| ${policer_data} \|
-| | ...
-| | [Arguments] | ${node} | ${policer_data}
-| | Configure Policer
-| | ... | ${node} | ${policer_data['name']} | ${policer_data}
-
-| Policer Operational Data From Honeycomb Should Be
-| | [Documentation] | Retrieves Policer operational data and verifies if\
-| | ... | Policer is configured correctly.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - policer_data - data to compare configuration Policer with.\
-| | ... | Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Policer Operational Data From Honeycomb Should Be \
-| | ... | \| ${node} \| ${policer_data} \|
-| | ...
-| | [Arguments] | ${node} | ${policer_data}
-| | ${data}= | Get Policer oper data | ${node} | ${policer_data['name']}
-| | Compare data structures | ${data[0]} | ${policer_data}
-
-| Policer Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Checks whether Policer configuration from Honeycomb \
-| | ... | is empty.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Policer Operational Data From Honeycomb Should Be empty \
-| | ... | \| ${node} \|
-| | ...
-| | [Arguments] | ${node}
-| | Run keyword and expect error | HoneycombError*404*
-| | ... | Get Policer oper data | ${node} | ${policer_data['name']}
-
-| Honeycomb removes Policer configuration
-| | [Documentation] | Uses Honeycomb API to remove Policer configuration\
-| | ... | from the specified interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes Policer configuration \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node}
-| | Configure Policer | ${node} | ${policer_data['name']}
-
-| Tear down policer test
-| | [Documentation] | Uses Honeycomb API to remove Policer configuration\
-| | ... | and reset interface state.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes Policer configuration \
-| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node}
-| | Honeycomb removes Policer configuration | ${node}
-
-| Honeycomb enables Policer on interface
-| | [Documentation] | Uses Honeycomb API to enable Policer on an interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - table_name - name of an ACL table. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb enables ACL on interface \| ${nodes['DUT1']} \
-| | ... | \| GigabithEthernet0/8/0 \| table0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${table_name}
-| | Enable Policer on interface
-| | ... | ${node} | ${interface} | ${table_name}
-
-| Honeycomb disables Policer on interface
-| | [Documentation] | Uses Honeycomb API to disable Policer on an interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb disables Policer on interface \| ${nodes['DUT1']} \
-| | ... | \| GigabithEthernet0/8/0 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | Disable Policer on interface
-| | ... | ${node} | ${interface}
-
-| Honeycomb Send packet and verify marking
-| | [Documentation] | Send packet and verify DSCP of the received packet.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - TG node. Type: dictionary
-| | ... | - tx_if - TG transmit interface. Type: string
-| | ... | - rx_if - TG receive interface. Type: string
-| | ... | - src_mac - Packet source MAC. Type: string
-| | ... | - dst_mac - Packet destination MAC. Type: string
-| | ... | - src_ip - Packet source IP address. Type: string
-| | ... | - dst_ip - Packet destination IP address. Type: string
-| | ... | - dscp_num - DSCP value to verify. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| ${dscp}= \| DSCP AF22 \|
-| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \
-| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \
-| | ... | \| 192.168.122.1 \| ${dscp} \|
-| | ...
-| | [Arguments] | ${node} | ${tx_if} | ${rx_if} | ${src_mac} | ${dst_mac}
-| | ... | ${src_ip} | ${dst_ip} | ${dscp_num}
-| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_if}
-| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_if}
-| | ${args}= | Traffic Script Gen Arg | ${rx_if_name} | ${tx_if_name}
-| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${args}= | Set Variable | ${args} --dscp ${dscp_num}
-| | Run Traffic Script On Node | policer.py | ${node} | ${args}