diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/policer.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/policer.robot | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/resources/libraries/robot/honeycomb/policer.robot b/resources/libraries/robot/honeycomb/policer.robot deleted file mode 100644 index 87b97470ac..0000000000 --- a/resources/libraries/robot/honeycomb/policer.robot +++ /dev/null @@ -1,162 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/traffic.robot -| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords -| Variables | resources/test_data/honeycomb/policer_variables.py -| Documentation | Keywords used to test Policer using Honeycomb. - -*** Keywords *** -| Honeycomb Configures Policer -| | [Documentation] | Uses Honeycomb API to configure Policer on the specified\ -| | ... | interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - policer_data - data needed to configure Policer. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb Configures Policer \| ${node} \ -| | ... | \| ${policer_data} \| -| | ... -| | [Arguments] | ${node} | ${policer_data} -| | Configure Policer -| | ... | ${node} | ${policer_data['name']} | ${policer_data} - -| Policer Operational Data From Honeycomb Should Be -| | [Documentation] | Retrieves Policer operational data and verifies if\ -| | ... | Policer is configured correctly. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - policer_data - data to compare configuration Policer with.\ -| | ... | Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Policer Operational Data From Honeycomb Should Be \ -| | ... | \| ${node} \| ${policer_data} \| -| | ... -| | [Arguments] | ${node} | ${policer_data} -| | ${data}= | Get Policer oper data | ${node} | ${policer_data['name']} -| | Compare data structures | ${data[0]} | ${policer_data} - -| Policer Operational Data From Honeycomb Should Be empty -| | [Documentation] | Checks whether Policer configuration from Honeycomb \ -| | ... | is empty. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Policer Operational Data From Honeycomb Should Be empty \ -| | ... | \| ${node} \| -| | ... -| | [Arguments] | ${node} -| | Run keyword and expect error | HoneycombError*404* -| | ... | Get Policer oper data | ${node} | ${policer_data['name']} - -| Honeycomb removes Policer configuration -| | [Documentation] | Uses Honeycomb API to remove Policer configuration\ -| | ... | from the specified interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes Policer configuration \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} -| | Configure Policer | ${node} | ${policer_data['name']} - -| Tear down policer test -| | [Documentation] | Uses Honeycomb API to remove Policer configuration\ -| | ... | and reset interface state. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes Policer configuration \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} -| | Honeycomb removes Policer configuration | ${node} - -| Honeycomb enables Policer on interface -| | [Documentation] | Uses Honeycomb API to enable Policer on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... | - table_name - name of an ACL table. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb enables ACL on interface \| ${nodes['DUT1']} \ -| | ... | \| GigabithEthernet0/8/0 \| table0 \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${table_name} -| | Enable Policer on interface -| | ... | ${node} | ${interface} | ${table_name} - -| Honeycomb disables Policer on interface -| | [Documentation] | Uses Honeycomb API to disable Policer on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb disables Policer on interface \| ${nodes['DUT1']} \ -| | ... | \| GigabithEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | Disable Policer on interface -| | ... | ${node} | ${interface} - -| Honeycomb Send packet and verify marking -| | [Documentation] | Send packet and verify DSCP of the received packet. -| | ... -| | ... | *Arguments:* -| | ... | - node - TG node. Type: dictionary -| | ... | - tx_if - TG transmit interface. Type: string -| | ... | - rx_if - TG receive interface. Type: string -| | ... | - src_mac - Packet source MAC. Type: string -| | ... | - dst_mac - Packet destination MAC. Type: string -| | ... | - src_ip - Packet source IP address. Type: string -| | ... | - dst_ip - Packet destination IP address. Type: string -| | ... | - dscp_num - DSCP value to verify. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| ${dscp}= \| DSCP AF22 \| -| | ... | \| Send packet and verify marking \| ${nodes['TG']} \| eth1 \| eth2 \ -| | ... | \| 08:00:27:87:4d:f7 \| 52:54:00:d4:d8:22 \| 192.168.122.2 \ -| | ... | \| 192.168.122.1 \| ${dscp} \| -| | ... -| | [Arguments] | ${node} | ${tx_if} | ${rx_if} | ${src_mac} | ${dst_mac} -| | ... | ${src_ip} | ${dst_ip} | ${dscp_num} -| | ${tx_if_name}= | Get Interface Name | ${node} | ${tx_if} -| | ${rx_if_name}= | Get Interface Name | ${node} | ${rx_if} -| | ${args}= | Traffic Script Gen Arg | ${rx_if_name} | ${tx_if_name} -| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip} -| | ${args}= | Set Variable | ${args} --dscp ${dscp_num} -| | Run Traffic Script On Node | policer.py | ${node} | ${args} |