diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/proxyarp.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/proxyarp.robot | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/resources/libraries/robot/honeycomb/proxyarp.robot b/resources/libraries/robot/honeycomb/proxyarp.robot deleted file mode 100644 index 2df1d3c13a..0000000000 --- a/resources/libraries/robot/honeycomb/proxyarp.robot +++ /dev/null @@ -1,193 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.honeycomb.ProxyARP.ProxyARPKeywords -| Library | resources.libraries.python.honeycomb.ProxyARP.IPv6NDProxyKeywords -| Documentation | Keywords used to test Honeycomb ARP proxy and IPv6ND proxy. - -*** Keywords *** -| Honeycomb configures proxyARP -| | [Documentation] | Uses Honeycomb API to configure proxyARP for a specific\ -| | ... | destination IP range. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - data - Configuration to use. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb configures proxyARP \| ${nodes['DUT1']} \| ${data} \| -| | [Arguments] | ${node} | ${data} -| | Configure proxyARP | ${node} | ${data} - -| Honeycomb removes proxyARP configuration -| | [Documentation] | Uses Honeycomb API to remove existing proxyARP\ -| | ... | IP range configuration. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes proxyARP configuration \| ${nodes['DUT1']} \| -| | [Arguments] | ${node} -| | Remove proxyARP configuration | ${node} - -| Honeycomb enables proxyARP on interface -| | [Documentation] | Uses Honeycomb API to enable the proxyARP\ -| | ... | feature on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb enables proxyARP on interface \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | Set proxyARP interface config | ${node} | ${interface} | enable - -| Honeycomb disables proxyARP on interface -| | [Documentation] | Uses Honeycomb API to disable the proxyARP\ -| | ... | feature on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb disables proxyARP on interface \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | [Arguments] | ${node} | ${interface} -| | Set proxyARP interface config | ${node} | ${interface} | disable - -| Honeycomb configures IPv6 ND proxy on interface -| | [Documentation] | Uses Honeycomb API to enable the IPv6 ND proxy\ -| | ... | feature on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... | - addresses - one or more addresses to configure ND proxy with.\ -| | ... | Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb configures IPv6 ND proxy on interface \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 10::10 \| 10::11 \| -| | ... -| | [Arguments] | ${node} | ${interface} | @{addresses} -| | Configure IPv6ND | ${node} | ${interface} | ${addresses} - -| Honeycomb disables IPv6 ND proxy on interface -| | [Documentation] | Uses Honeycomb API to disable the IPv6 ND proxy\ -| | ... | feature on an interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb disables IPv6 ND proxy on interface \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | [Arguments] | ${node} | ${interface} -| | Configure IPv6ND | ${node} | ${interface} - -| IPv6 ND proxy from Honeycomb should be -| | [Documentation] | Retrieves IPv6 ND proxy operational data and compares\ -| | ... | with expected values. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... | - addresses - one or more addresses to expect. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| IPv6 ND proxy from Honeycomb should be \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 10::11 \| -| | ... -| | [Arguments] | ${node} | ${interface} | @{addresses} -| | ${oper_data}= | Get interface oper data | ${node} | ${interface} -| | ${oper_data}= | Set Variable -| | ... | ${oper_data['ietf-ip:ipv6']['nd-proxy:nd-proxies']['nd-proxy']} -| | ${data}= | Evaluate | [{"address":x} for x in $addresses] -| | Sort List | ${oper_data} -| | Sort List | ${data} -| | Should be equal | ${oper_data} | ${data} - -| IPv6 ND proxy from Honeycomb should be empty -| | [Documentation] | Retrieves IPv6 ND proxy operational data and expects\ -| | ... | to fail due to no data present. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \|IPv6 ND proxy from Honeycomb should be empty \| ${nodes['DUT1']} \ -| | ... | \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | ${oper_data}= | Get interface oper data | ${node} | ${interface} -| | Variable Should Not Exist -| | ... | ${oper_data['ietf-ip:ipv6']['nd-proxy:nd-proxies']['nd-proxy']} - -| Verify IPv6ND proxy -| | [Documentation] | Send and receive ICMPv6 messages between TG interfaces -| | ... | through Neighbor Discovery proxy. -| | ... -| | ... | *Arguments:* -| | ... | - tg_node - TG node. Type: dictionary -| | ... | - tg_interface1 - TG interface. Type: string -| | ... | - tg_interface2 - TG interface. Type: string -| | ... | - src_ip - Source IPv6 address to use. Type: string -| | ... | - dst_ip - Destination IPv6 address to use. Type: string -| | ... | - src_mac - MAC address of source interface. Type: string -| | ... | - dst_mac - MAC address of destination interface. Type: string -| | ... | - proxy_to_src_mac - MAC address of DUT interface on link to source\ -| | ... | TG interface. Type: string -| | ... | - proxy_to_dst_mac - MAC address of DUT interface on link to dest\ -| | ... | TG interface. Type: string -| | ... -| | ... | *Return:* -| | ... | - No value returned. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Verify IPv6ND proxy \| ${nodes['TG']} \ -| | ... | \| eth3 \| eth4 \| 3ffe:62::1 \| 3ffe:63::2 \ -| | ... | \| 08:00:27:cc:4f:54 \| 08:00:27:64:18:d2 \ -| | ... | \| 08:00:27:c9:6a:d5 \| 08:00:27:c4:75:3a \| -| | ... -| | [Arguments] | ${tg_node} | ${tg_interface1} | ${tg_interface2} -| | ... | ${src_ip} | ${dst_ip} | ${src_mac} | ${dst_mac} -| | ... | ${proxy_to_src_mac} | ${proxy_to_dst_mac} -| | ${tg_interface_name1}= | Get interface name | ${tg_node} | ${tg_interface1} -| | ${tg_interface_name2}= | Get interface name | ${tg_node} | ${tg_interface2} -| | ${args}= | Catenate | --tx_if | ${tg_interface_name1} -| | ... | --rx_if | ${tg_interface_name2} -| | ... | --src_ip | ${src_ip} -| | ... | --dst_ip | ${dst_ip} -| | ... | --src_mac | ${src_mac} -| | ... | --dst_mac | ${dst_mac} -| | ... | --proxy_to_src_mac | ${proxy_to_src_mac} -| | ... | --proxy_to_dst_mac | ${proxy_to_dst_mac} -| | Run Traffic Script On Node | ipv6_nd_proxy_check.py -| | ... | ${tg_node} | ${args} |