diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/sub_interface.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/sub_interface.robot | 670 |
1 files changed, 0 insertions, 670 deletions
diff --git a/resources/libraries/robot/honeycomb/sub_interface.robot b/resources/libraries/robot/honeycomb/sub_interface.robot deleted file mode 100644 index 8bb95f51b8..0000000000 --- a/resources/libraries/robot/honeycomb/sub_interface.robot +++ /dev/null @@ -1,670 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util -| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords -| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot -| Documentation | Keywords used to manipulate sub-interfaces. - -*** Keywords *** -| Honeycomb creates sub-interface -| | [Documentation] | Create a sub-interface using Honeycomb API. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface where a sub-interface will be\ -| | ... | created. Type: string -| | ... | - match - Match type. Type: string -| | ... | - tags - List of tags to be set while creating the sub-interface.\ -| | ... | Type: list -| | ... | - sub_interface_settings - Sub-inteface parameters to be set while\ -| | ... | creating the sub-interface. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb creates sub-interface\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0\ -| | ... | \| vlan-tagged-exact-match \| ${sub_if_1_tags}\ -| | ... | \| ${sub_if_1_settings} \| -| | ... -| | [Arguments] | ${node} | ${super_interface} -| | ... | ${match} | ${tags} | ${sub_interface_settings} -| | ... -| | Honeycomb Create sub interface | ${node} | ${super_interface} -| | ... | ${match} | ${tags} | &{sub_interface_settings} - -| Sub-interface Operational Data From Honeycomb Should Be -| | [Documentation] | Retrieves sub-interface configuration through Honeycomb\ -| | ... | and compares it with settings supplied in argument. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - sub_if_settings - Operational data for sub-interface to be checked.\ -| | ... | Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface Operational Data From Honeycomb Should Be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ -| | ... | \| ${sub_if_1_params} \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... | ${sub_if_settings} -| | ... -| | ${api_data}= | Get sub interface oper data -| | ... | ${node} | ${super_interface} | ${identifier} -| | Compare Data Structures | ${api_data} | ${sub_if_settings} - -| Sub-interface Operational Data From Honeycomb Should Be empty -| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \ -| | ... | and expects no data. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface Operational Data From Honeycomb Should Be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Run keyword and expect error | *KeyError: 'vpp-vlan:sub-interfaces'* -| | ... | Get sub interface oper data -| | ... | ${node} | ${super_interface} | ${identifier} - -| Sub-interface state from Honeycomb should be -| | [Documentation] | Retrieves sub-interface configuration through Honeycomb \ -| | ... | and checks the administrative and operational state. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - admin_state - Required administrative state - up or down. \ -| | ... | Type: string -| | ... | - oper_state - Required operational state - up or down. Type: string -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface state from Honeycomb should be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| up \| up \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... | ${admin_state} | ${oper_state} -| | ... -| | ${api_data}= | Get sub interface oper data -| | ... | ${node} | ${super_interface} | ${identifier} -| | Should be equal | ${api_data['admin-status']} | ${admin_state} -| | Should be equal | ${api_data['oper-status']} | ${oper_state} - -| Sub-interface Operational Data From VAT Should Be -| | [Documentation] | Retrieves sub-interface configuration through VAT and\ -| | ... | compares it with settings supplied in argument. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node.\ -| | ... | Type: string -| | ... | - sub_interface_settings - Operational data specific for a\ -| | ... | sub-interface to be checked. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface Operational Data From VAT Should Be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_if_1_params} \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} | ${sub_interface_settings} -| | ... -| | ${vat_data}= | VPP get interface data -| | ... | ${node} | ${sub_interface} -| | Should be equal as strings | ${vat_data['sub_id']} -| | ... | ${sub_interface_settings['identifier']} -| | Should be equal as strings -| | ... | ${vat_data['interface_name']} | ${sub_interface} -| | Run keyword if | ${vat_data['link_up_down']} == 0 -| | ... | Should be equal as strings -| | ... | ${sub_interface_settings['oper-status']} | down -| | Run keyword if | ${vat_data['link_up_down']} == 1 -| | ... | Should be equal as strings -| | ... | ${sub_interface_settings['oper-status']} | up - -| Sub-interface state from VAT should be -| | [Documentation] | Retrieves sub-interface configuration through VAT and \ -| | ... | checks the administrative and operational state. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node. \ -| | ... | Type: string -| | ... | - admin_state - Required administrative state - up or down. \ -| | ... | Type: string -| | ... | - oper_state - Required operational state - up or down. Type: string -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface state from VAT should be \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| up \| up \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} | ${admin_state} | ${oper_state} -| | ... -| | ${vat_data}= | VPP get interface data -| | ... | ${node} | ${sub_interface} -| | Run keyword if | '${admin_state}' == 'down' -| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 0 -| | Run keyword if | '${admin_state}' == 'up' -| | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 1 -| | Run keyword if | '${oper_state}' == 'down' -| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 0 -| | Run keyword if | '${oper_state}' == 'up' -| | ... | Should be equal as strings | ${vat_data['link_up_down']} | 1 - -| Sub-interface indices from Honeycomb and VAT should correspond -| | [Documentation] | Uses VAT and Honeycomb to get operational data about the\ -| | ... | given sub-interface and compares the interface indexes. The -| | ... | sub-interface index from Honeycomb should be greater than index from -| | ... | VAT by one. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Sub-interface indices from Honeycomb and VAT should correspond \ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | ${api_data}= | Get sub interface oper data -| | ... | ${node} | ${super_interface} | ${identifier} -| | ${vat_data}= | VPP get interface data -| | ... | ${node} | ${super_interface}.${identifier} -| | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1 -| | Should be equal as strings -| | ... | ${api_data['if-index']} | ${sw_if_index} - -| Honeycomb sets the sub-interface up -| | [Documentation] | Honeycomb sets the sub-interface up. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | Honeycomb sets the sub-interface up\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Set sub interface state -| | ... | ${node} | ${super_interface} | ${identifier} | up - -| Honeycomb sets the sub-interface down -| | [Documentation] | Honeycomb sets the sub-interface down. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | Honeycomb sets the sub-interface down\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Set sub interface state -| | ... | ${node} | ${super_interface} | ${identifier} | down - -| Honeycomb fails to set sub-interface up -| | [Documentation] | Honeycomb tries to set sub-interface up and expects error. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_interface - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb fails to set sub-interface up\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_interface} | ${identifier} -| | ... -| | Run keyword and expect error | *HoneycombError: * was not successful. * 500. -| | ... | Set sub interface state -| | ... | ${node} | ${super_interface} | ${identifier} | up - -| Honeycomb adds sub-interface to bridge domain -| | [Documentation] | Honeycomb adds the given sub-interface to bridge domain. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - sub_bd_setings - Bridge domain parameters to be set while adding\ -| | ... | the sub-interface to the bridge domain. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb adds sub-interface to bridge domain\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings} -| | ... -| | Add bridge domain to sub interface -| | ... | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings} - -| Sub-interface bridge domain Operational Data From Honeycomb Should Be -| | [Documentation] | Uses Honeycomb API to verify sub-interface assignment to\ -| | ... | a bridge domain. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - settings - Bridge domain parameters to be checked. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface bridge domain Operational Data From Honeycomb Should Be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} -| | ... -| | ${if_data}= | Get BD data from sub interface -| | ... | ${node} | ${super_if} | ${identifier} -| | Should be equal | ${if_data['bridge-domain']} -| | ... | ${settings['bridge-domain']} - -| Sub-interface bridge domain Operational Data From PAPI Should Be -| | [Documentation] | Uses VAT to verify sub-interface assignment to a bridge\ -| | ... | domain. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - interface - Name of a sub-interface on the specified node. Type:\ -| | ... | string -| | ... | - setings - Parameters to be checked. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Sub-interface bridge domain Operational Data From PAPI Should Be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_bd_setings} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${settings} -| | ... -| | ${bd_data}= | VPP get bridge domain data | ${node} -| | ${bd_intf}= | Set Variable | ${bd_data[0]} -| | ${sw_if_data}= | Set Variable | ${bd_intf['sw_if_details'][0]} -| | Should be equal as integers | ${bd_intf['flood']} | ${bd_settings['flood']} -| | Should be equal as integers | ${bd_intf['forward']} -| | ... | ${bd_settings['forward']} -| | Should be equal as integers | ${bd_intf['learn']} | ${bd_settings['learn']} -# interface[1] = sw_if_index, interface[2] = shg -| | Should be equal as strings | ${sw_if_data[2]} -| | ... | ${settings['split-horizon-group']} - -| Honeycomb fails to remove all sub-interfaces -| | [Documentation] | Honeycomb tries to remove all sub-interfaces using\ -| | ... | Honeycomb API. This operation must fail. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb fails to remove all sub-interfaces\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| -| | ... -| | [Arguments] | ${node} | ${super_if} -| | ... -| | Run keyword and expect error | *HoneycombError:*not successful. * code: 500. -| | ... | Remove all sub interfaces -| | ... | ${node} | ${super_if} - -| Honeycomb configures tag rewrite -| | [Documentation] | Honeycomb configures tag-rewrite -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - settings - tag-rewrite parameters. Type: dictionary. -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb configures tag rewrite\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ -| | ... | \| ${tag_rewrite_push} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} -| | ... -| | Configure tag rewrite -| | ... | ${node} | ${super_if} | ${identifier} | ${settings} - -| Rewrite tag from Honeycomb should be empty -| | [Documentation] | Checks if the tag-rewrite is empty or does not exist. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Rewrite tag from Honeycomb should be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} -| | ... -| | Run keyword and expect error | *Hon*Error*oper*does not contain*tag-rewrite* -| | ... | Get tag rewrite oper data -| | ... | ${node} | ${super_if} | ${identifier} - -| Rewrite tag from Honeycomb should be -| | [Documentation] | Checks if the operational data retrieved from Honeycomb\ -| | ... | are as expected. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - settings - tag-rewrite operational parameters to be checked.\ -| | ... | Type: dictionary. -| | ... -| | ... | *Example:* -| | ... | \| Rewrite tag from Honeycomb should be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ -| | ... | \| ${tag_rewrite_push_oper} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} -| | ${api_data}= | Get tag rewrite oper data -| | ... | ${node} | ${super_if} | ${identifier} -| | Compare Data Structures -| | ... | ${api_data} | ${settings} - -| Rewrite tag from VAT should be -| | [Documentation] | Retrieves sub-interface configuration through VAT and\ -| | ... | compares values of rewrite tag parameters with settings supplied in\ -| | ... | argument. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of a sub-interface on the specified node.\ -| | ... | Type: string -| | ... | - rw_settings - Parameters to be set while setting the rewrite tag.\ -| | ... | Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Rewrite tag from VAT should be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${rw_params} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${rw_settings} -| | ${vat_data}= | VPP get interface data | ${node} | ${interface} -| | Compare Data Structures | ${vat_data} | ${rw_settings} - -| Honeycomb fails to set wrong rewrite tag -| | [Documentation] | Honeycomb tries to set wrong rewrite tag and expects\ -| | ... | an error. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - settings - tag-rewrite parameters. Type: dictionary. -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb fails to set wrong rewrite tag\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ -| | ... | \| ${tag_rewrite_push_WRONG} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} -| | Run keyword and expect error | *HoneycombError: * was not successful. *00. -| | ... | Configure tag rewrite -| | ... | ${node} | ${super_if} | ${identifier} | ${settings} - -| Honeycomb sets sub-interface ipv4 address -| | [Documentation] | Uses Honeycomb API to configure an ipv4 address on the\ -| | ... | spcified sub-interface. Replaces any existing ipv4 addresses. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - address - IPv4 address to set. Type: string -| | ... | - prefix - IPv4 network prefix length to set. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| | Honeycomb sets sub-interface ipv4 address\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ -| | ... | \| 192.168.0.2 \| ${24} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} -| | Add ip address to sub_interface -| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv4 - -| Sub-interface ipv4 address from Honeycomb should be -| | [Documentation] | Uses Honeycomb API to verify ipv4 address configuration\ -| | ... | on the specified sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - address - IPv4 address to expect. Type: string -| | ... | - prefix - IPv4 network prefix length to expect. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv4 address from Honeycomb should be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ -| | ... | \| 192.168.0.2 \| ${24} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} -| | ${if_data}= | Get sub interface oper data -| | ... | ${node} | ${super_if} | ${identifier} -| | Should be equal -| | ... | ${if_data['ipv4']['address'][0]['ip']} | ${address} -| | Should be equal -| | ... | ${if_data['ipv4']['address'][0]['prefix-length']} | ${prefix} - -| Sub-interface ipv4 address from VAT should be -| | [Documentation] | Uses VAT to verify ipv4 address configuration\ -| | ... | on the specified sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node.\ -| | ... | Type: string -| | ... | - address - IPv4 address to expect. Type: string -| | ... | - prefix - IPv4 network prefix length to expect. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv4 address from VAT should be\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix} -| | ${data}= | VPP get interface ip addresses -| | ... | ${node} | ${sub_interface} | ipv4 -| | Should be equal | ${data[0]['ip']} | ${address} -| | Should be equal | ${data[0]['prefix_length']} | ${prefix} - -| Honeycomb removes all sub-interface ipv4 addresses -| | [Documentation] | Uses Honeycomb API to remove all configured ipv4\ -| | ... | addresses from the sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb removes all sub-interface ipv4 addresses\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} -| | Remove all ip addresses from sub_interface -| | ... | ${node} | ${super_if} | ${identifier} | ipv4 - -| Sub-interface ipv4 address from Honeycomb should be empty -| | [Documentation] | Uses Honeycomb API to verify that ipv4 address\ -| | ... | configuration on the specified sub-interface is empty. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv4 address from Honeycomb should be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} -| | ${if_data}= | Get sub interface oper data -| | ... | ${node} | ${super_if} | ${identifier} -| | Run keyword and expect error | *KeyError: 'ipv4'* -| | ... | Set Variable | ${if_data['ipv4']['address'][0]['ip']} - -| Sub-interface ipv4 address from VAT should be empty -| | [Documentation] | Uses VAT to verify that ipv4 address\ -| | ... | configuration on the specified sub-interface is empty. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node.\ -| | ... | Type: string -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv4 address from VAT should be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} -| | ${data}= | VPP get interface ip addresses -| | ... | ${node} | ${sub_interface} | ipv4 -| | Should be empty | ${data} - -| Honeycomb sets sub-interface ipv6 address -| | [Documentation] | Uses Honeycomb API to configure an ipv6 address on the\ -| | ... | spcified sub-interface. Replaces any existing ipv6 addresses. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - address - IPv6 address to set. Type: string -| | ... | - prefix - IPv6 network prefix length to set. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| | Honeycomb sets sub-interface ipv6 address\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ -| | ... | \| 10::10 \| ${64} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} -| | Add ip address to sub_interface -| | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv6 - -| Sub-interface IPv6 address from Honeycomb should contain -| | [Documentation] | Uses Honeycomb API to verify ipv6 address configuration\ -| | ... | on the specified sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... | - address - IPv6 address to expect. Type: string -| | ... | - prefix - IPv6 network prefix length to expect. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| sub-interface IPv6 address from Honeycomb should contain\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ -| | ... | \| 10::10 \| ${64} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} -| | ${if_data}= | Get sub interface oper data -| | ... | ${node} | ${super_if} | ${identifier} -| | ${settings}= | Create Dictionary -| | ... | ip=${address} | prefix-length=${prefix} -| | Should contain | ${if_data['ipv6']['address']} | ${settings} - -| Sub-interface IPv6 address from VAT should contain -| | [Documentation] | Uses VAT to verify ipv6 address configuration\ -| | ... | on the specified sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node.\ -| | ... | Type: string -| | ... | - address - IPv6 address to expect. Type: string -| | ... | - prefix - IPv6 network prefix length to expect. Type: integer -| | ... -| | ... | *Example:* -| | ... | \| sub-interface IPv6 address from VAT should contain\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix} -| | ${data}= | VPP get interface ip addresses -| | ... | ${node} | ${sub_interface} | ipv6 -| | Should be equal | ${data[0]['ip']} | ${address} -| | Should be equal | ${data[0]['prefix_length']} | ${prefix} - -| Honeycomb removes all sub-interface ipv6 addresses -| | [Documentation] | Uses Honeycomb API to remove all configured ipv6\ -| | ... | addresses from the sub-interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb removes all sub-interface ipv6 addresses\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} -| | Remove all ip addresses from sub_interface -| | ... | ${node} | ${super_if} | ${identifier} | ipv6 - -| Sub-interface ipv6 address from Honeycomb should be empty -| | [Documentation] | Uses Honeycomb API to verify that ipv6 address\ -| | ... | configuration on the specified sub-interface is empty. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - super_if - Super-interface. Type: string -| | ... | - identifier - Sub-interface ID. Type: integer or string -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv6 address from Honeycomb should be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| -| | ... -| | [Arguments] | ${node} | ${super_if} | ${identifier} -| | ${if_data}= | Get sub interface oper data -| | ... | ${node} | ${super_if} | ${identifier} -| | Run keyword and expect error | *KeyError: 'ipv6'* -| | ... | Set Variable | ${if_data['ipv6']['address'][0]['ip']} - -| Sub-interface ipv6 address from VAT should be empty -| | [Documentation] | Uses VAT to verify that ipv6 address\ -| | ... | configuration on the specified sub-interface is empty. -| | ... -| | ... | *Arguments:* -| | ... | - node - Information about a DUT node. Type: dictionary -| | ... | - sub_interface - Name of an sub-interface on the specified node.\ -| | ... | Type: string -| | ... -| | ... | *Example:* -| | ... | \| sub-interface ipv6 address from VAT should be empty\ -| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| -| | ... -| | [Arguments] | ${node} | ${sub_interface} -| | ${data}= | VPP get interface ip addresses -| | ... | ${node} | ${sub_interface} | ipv6 -| | Should be empty | ${data} |