diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/sub_interface.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/sub_interface.robot | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/sub_interface.robot b/resources/libraries/robot/honeycomb/sub_interface.robot new file mode 100644 index 0000000000..dd68e3f22e --- /dev/null +++ b/resources/libraries/robot/honeycomb/sub_interface.robot @@ -0,0 +1,412 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.InterfaceUtil +| ... | WITH NAME | interfaceCLI +| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords +| ... | WITH NAME | InterfaceAPI +| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot +| Documentation | Keywords used to manipulate sub-interfaces. + +*** Variables *** +# Translation table used to convert values received from Honeycomb to values +# received from VAT. +| &{rewrite_operations}= +| ... | disabled=0 +| ... | push-1=1 +| ... | push-2=2 +| ... | pop-1=3 +| ... | pop-2=4 +| ... | translate-1-to-1=5 +| ... | translate-1-to-2=6 +| ... | translate-2-to-1=7 +| ... | translate-2-to-2=8 + +*** Keywords *** +| Honeycomb creates sub-interface +| | [Documentation] | Create a sub-interface using Honeycomb API. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - identifier - ID of sub-interface to be created. Type: integer +| | ... | - sub_interface_base_settings - Configuration data for sub-interface.\ +| | ... | Type: dictionary +| | ... | - sub_interface_settings - Configuration data specific for a\ +| | ... | sub-interface. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb creates sub-interface\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| 10 \| ${sub_interface_settings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${identifier} +| | ... | ${sub_interface_base_settings} | ${sub_interface_settings} +| | interfaceAPI.Create sub interface | ${node} | ${interface} +| | ... | &{sub_interface_base_settings} | &{sub_interface_settings} + +| Honeycomb fails to remove sub-interface +| | [Documentation] | Honeycomb tries to remove sub-interface using Honeycomb\ +| | ... | API. This operation must fail. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of a sub-interface on the specified node. +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb fails to remove sub-interface\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| +| | ... +| | [Arguments] | ${node} | ${interface} +| | Run keyword and expect error | *HoneycombError: Not possible to remove* 500. +| | ... | interfaceAPI.Delete interface | ${node} | ${interface} + +| Sub-interface configuration from Honeycomb should be +| | [Documentation] | Retrieves sub-interface configuration through Honeycomb\ +| | ... | and compares it with settings supplied in argument. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - base_settings - Configuration data for sub-interface.\ +| | ... | Type: dictionary +| | ... | - sub_settings - Configuration data specific for a sub-interface.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface configuration from Honeycomb should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${sub_interface_base_settings}\ +| | ... | \| ${sub_interface_settings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${base_settings} | ${sub_settings} +| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | ${api_sub}= | Set Variable | ${api_data['v3po:sub-interface']} +| | :FOR | ${key} | IN | @{base_settings.keys()} +| | | Should be equal | ${api_data['${key}']} | ${base_settings['${key}']} +| | Should be equal as strings +| | ... | ${api_sub['super-interface']} | ${sub_settings['super-interface']} +| | Should be equal as strings +| | ... | ${api_sub['identifier']} | ${sub_settings['identifier']} +| | Should be equal as strings +| | ... | ${api_sub['vlan-type']} | ${sub_settings['vlan-type']} +| | Should be equal as strings +| | ... | ${api_sub['number-of-tags']} | ${sub_settings['number-of-tags']} +| | Run keyword if | ${sub_settings['match-any-outer-id']} == ${TRUE} +| | ... | Should be equal | ${api_sub['match-any-outer-id'][0]} | ${None} +| | Run keyword if | ${sub_settings['match-any-inner-id']} == ${TRUE} +| | ... | Should be equal | ${api_sub['match-any-inner-id'][0]} | ${None} +| | Run keyword if | ${sub_settings['exact-match']} == ${TRUE} +| | ... | Should be equal | ${api_sub['exact-match'][0]} | ${None} +| | Run keyword if | ${sub_settings['default-subif']} == ${TRUE} +| | ... | Should be equal | ${api_sub['default-subif'][0]} | ${None} + +| Sub-interface configuration from VAT should be +| | [Documentation] | Retrieves sub-interface configuration through VAT and\ +| | ... | compares it with settings supplied in argument. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - sub_settings - Configuration data specific for a sub-interface.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface configuration from VAT should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${sub_interface_base_settings}\ +| | ... | \| ${sub_interface_settings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${sub_settings} +| | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} +| | Should be equal as strings | ${vat_data['sub_id']} +| | ... | ${sub_settings['identifier']} +| | Should be equal as strings | ${vat_data['sub_number_of_tags']} +| | ... | ${sub_settings['number-of-tags']} +| | Run keyword if | ${sub_settings['match-any-outer-id']} == ${TRUE} +| | ... | Should be equal as integers | ${vat_data['sub_outer_vlan_id_any']} +| | ... | ${sub_settings['match-any-outer-id']} +| | Run keyword if | ${sub_settings['match-any-inner-id']} == ${TRUE} +| | ... | Should be equal as integers | ${vat_data['sub_inner_vlan_id_any']} +| | ... | ${sub_settings['match-any-inner-id']} +| | Run keyword if | ${sub_settings['exact-match']} == ${TRUE} +| | ... | Should be equal as integers | ${vat_data['sub_exact_match']} +| | ... | ${sub_settings['exact-match']} +| | Run keyword if | ${sub_settings['default-subif']} == ${TRUE} +| | ... | Should be equal as integers | ${vat_data['sub_default']} +| | ... | ${sub_settings['default-subif']} + +| Sub-interface configuration from Honeycomb should be empty +| | [Documentation] | Attempts to retrieve sub-interface configuration through\ +| | ... | Honeycomb and expects to get empty dictionary. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of a sub-interface on the specified node. Type:\ +| | ... | string +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface configuration from Honeycomb should be empty\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| +| | ... +| | [Arguments] | ${node} | ${interface} +| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | Should be empty | ${api_data} + +| Sub-interface configuration from VAT should be empty +| | [Documentation] | Attempts to retrieve sub-interface configuration through\ +| | ... | VAT and expects to get empty dictionary. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of a sub-interface on the specified node. Type:\ +| | ... | string +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface configuration from VAT should be empty\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| +| | ... +| | [Arguments] | ${node} | ${interface} | +| | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} +| | Should be empty | ${vat_data} + +| Honeycomb adds sub-interface to bridge domain +| | [Documentation] | Honeycomb adds the given sub-interface to bridge domain. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an sub-interface on the specified node. Type:\ +| | ... | string +| | ... | - bd_name - The name of bridge domain where the sub-interface will be\ +| | ... | added. Type: string +| | ... | - sub_bd_setings - Parameters to be set while adding the\ +| | ... | sub-interface to the bridge domain. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb adds sub-interface to bridge domain\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| test_bd \| ${sub_bd_setings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${bd_name} | ${sub_bd_setings} +| | interfaceAPI.Add bridge domain to interface +| | ... | ${node} | ${interface} | ${bd_name} +| | ... | split_horizon_group=${sub_bd_setings['split-horizon-group']} +| | ... | bvi=${sub_bd_setings['bridged-virtual-interface']} + +| Sub-interface bridge domain configuration from Honeycomb should be +| | [Documentation] | Uses Honeycomb API to verify sub-interface assignment to\ +| | ... | a bridge domain. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of a sub-interface on the specified node. Type:\ +| | ... | string +| | ... | - setings - Parameters to be checked. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface bridge domain configuration from Honeycomb should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${sub_bd_setings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${settings} +| | ${if_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | Should be equal | ${if_data['v3po:l2']['bridge-domain']} +| | ... | ${settings['bridge-domain']} +| | Should be equal | disabled +| | ... | ${if_data['v3po:l2']['vlan-tag-rewrite']['rewrite-operation']} + +| Sub-interface bridge domain configuration from VAT should be +| | [Documentation] | Uses VAT to verify sub-interface assignment to a bridge\ +| | ... | domain. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of a sub-interface on the specified node. Type:\ +| | ... | string +| | ... | - setings - Parameters to be checked. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface bridge domain configuration from VAT should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${sub_bd_setings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${settings} +| | ${bd_data}= | VPP get bridge domain data | ${node} +| | ${bd_intf}= | Set Variable | ${bd_data[0]} +| | ${sw_if_data}= | Set Variable | ${bd_intf['sw_if'][0]} +| | Should be equal as integers | ${bd_intf['flood']} | ${bd_settings['flood']} +| | Should be equal as integers | ${bd_intf['forward']} +| | ... | ${bd_settings['forward']} +| | Should be equal as integers | ${bd_intf['learn']} | ${bd_settings['learn']} +| | Should be equal as strings | ${sw_if_data['shg']} +| | ... | ${settings['split-horizon-group']} + +| Sub-interface configuration with bd and rw from Honeycomb should be +| | [Documentation] | Retrieves sub-interface configuration through Honeycomb\ +| | ... | and compares it with settings supplied in argument. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - base_settings - Configuration data for sub-interface.\ +| | ... | Type: dictionary +| | ... | - sub_settings - Configuration data specific for a sub-interface.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Sub-interface configuration with bd and rw from Honeycomb should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${sub_interface_base_settings}\ +| | ... | \| ${sub_interface_settings} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${base_settings} | ${sub_settings} +| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | ${api_sub}= | Set Variable | ${api_data['v3po:sub-interface']} +| | Should be equal as strings | ${api_data['name']} | ${base_settings['name']} +| | Should be equal as strings | ${api_data['type']} | ${base_settings['type']} +| | Should be equal as strings +| | ... | ${api_sub['super-interface']} | ${sub_settings['super-interface']} +| | Should be equal as strings +| | ... | ${api_sub['identifier']} | ${sub_settings['identifier']} +| | Should be equal as strings +| | ... | ${api_sub['vlan-type']} | ${sub_settings['vlan-type']} +| | Should be equal as strings +| | ... | ${api_sub['number-of-tags']} | ${sub_settings['number-of-tags']} +| | Run keyword if | ${sub_settings['match-any-outer-id']} == ${TRUE} +| | ... | Should be equal | ${api_sub['match-any-outer-id'][0]} | ${None} +| | Run keyword if | ${sub_settings['match-any-inner-id']} == ${TRUE} +| | ... | Should be equal | ${api_sub['match-any-inner-id'][0]} | ${None} +| | Run keyword if | ${sub_settings['exact-match']} == ${TRUE} +| | ... | Should be equal | ${api_sub['exact-match'][0]} | ${None} +| | Run keyword if | ${sub_settings['default-subif']} == ${TRUE} +| | ... | Should be equal | ${api_sub['default-subif'][0]} | ${None} +| | Should be equal | ${api_data['v3po:l2']['bridge-domain']} +| | ... | ${base_settings['v3po:l2']['bridge-domain']} +| | ${rw_data}= | Set Variable | ${api_data['v3po:l2']['vlan-tag-rewrite']} +| | ${rw_params}= | Set Variable +| | ... | ${base_settings['v3po:l2']['vlan-tag-rewrite']} +| | Should be equal as strings | ${rw_data['rewrite-operation']} +| | ... | ${rw_params['rewrite-operation']} +| | Should be equal as strings | ${rw_data['first-pushed']} +| | ... | ${rw_params['first-pushed']} + +| Rewrite tag configuration from VAT should be +| | [Documentation] | Retrieves sub-interface configuration through VAT and\ +| | ... | compares values of rewrite tag parameters with settings supplied in\ +| | ... | argument. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - rw_settings - Parameters to be set while setting the rewrite tag.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Rewrite tag configuration from VAT should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${rw_params} \| +| | ... +| | [Arguments] | ${node} | ${interface} | ${rw_settings} +| | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} +| | Should be equal as strings | ${vat_data['vtr_op']} +| | ... | ${rewrite_operations['${rw_settings['rewrite-operation']}']} +| | Run keyword if | '${rw_settings['rewrite-operation']}' == 'push-1' +| | ... | Should be equal as strings +| | ... | ${vat_data['vtr_tag1']} | ${rw_settings['tag1']} + +| Honeycomb sets rewrite tag +| | [Documentation] | Set the rewrite tag for sub-interface using Honeycomb API. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - sub_interface - name of an sub-interface on the specified node.\ +| | ... | Type: string +| | ... | - rw_params - Parameters to be set while setting the rewrite tag.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb sets rewrite tag\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${rw_params} \| +| | ... +| | [Arguments] | ${node} | ${sub_interface} | ${rw_params} +| | interfaceAPI.Add vlan tag rewrite to sub interface +| | ... | ${node} | ${sub_interface} | &{rw_params} + +| Honeycomb removes rewrite tag +| | [Documentation] | Remove the rewrite tag from sub-interface using Honeycomb\ +| | ... | API. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - sub_interface - name of an sub-interface on the specified node.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb removes rewrite tag \| ${nodes['DUT1']} \| sub_test \| +| | ... +| | [Arguments] | ${node} | ${sub_interface} +| | interfaceAPI.Remove vlan tag rewrite from sub interface +| | ... | ${node} | ${sub_interface} + +| Rewrite tag from Honeycomb should be +| | [Documentation] | Uses Honeycomb API to verify if the rewrite tag is set\ +| | ... | with correct parameters. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - sub_interface - name of an sub-interface on the specified node.\ +| | ... | Type: string +| | ... | - rw_params - Parameters to be checked. Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Rewrite tag from Honeycomb should be\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${rw_params} \| +| | ... +| | [Arguments] | ${node} | ${sub_interface} | ${rw_params} +| | ${if_data}= | interfaceAPI.Get interface oper data | ${node} +| | ... | ${sub_interface} +| | ${rw_data}= | Set Variable | ${if_data['v3po:l2']["vlan-tag-rewrite"]} +| | Should be equal as strings | ${rw_data['rewrite-operation']} +| | ... | ${rw_params['rewrite-operation']} +| | Should be equal as strings | ${rw_data['first-pushed']} +| | ... | ${rw_params['first-pushed']} + +| Honeycomb fails to set wrong rewrite tag +| | [Documentation] | Honeycomb tries to set wrong rewrite tag and expects\ +| | ... | error. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - sub_interface - name of an sub-interface on the specified node.\ +| | ... | Type: string +| | ... | - rw_params - Parameters to be set while setting the rewrite tag.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb fails to set wrong rewrite tag\ +| | ... | \| ${nodes['DUT1']} \| sub_test \| ${rw_params} \| +| | ... +| | [Arguments] | ${node} | ${sub_interface} | ${rw_params} +| | Run keyword and expect error | *HoneycombError: * was not successful. * 400. +| | ... | interfaceAPI.Add vlan tag rewrite to sub interface | ${node} +| | ... | ${sub_interface} | &{rw_params} + +| Honeycomb fails to set sub-interface up +| | [Documentation] | Honeycomb tries to set sub-interface up and expects error. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - sub_interface - name of an sub-interface on the specified node.\ +| | ... | Type: string +| | ... +| | ... | *Example:* +| | ... | \| Honeycomb fails to set sub-interface up\ +| | ... | \| ${node} \| sub_test \| +| | ... +| | [Arguments] | ${node} | ${sub_interface} +| | Run keyword and expect error | *HoneycombError: * was not successful. * 500. +| | ... | interfaceAPI.Set interface up | ${node} | ${sub_interface} |