diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb/tap.robot')
| -rw-r--r-- | resources/libraries/robot/honeycomb/tap.robot | 144 |
1 files changed, 0 insertions, 144 deletions
diff --git a/resources/libraries/robot/honeycomb/tap.robot b/resources/libraries/robot/honeycomb/tap.robot deleted file mode 100644 index 37d6a02f52..0000000000 --- a/resources/libraries/robot/honeycomb/tap.robot +++ /dev/null @@ -1,144 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords -| Documentation | Keywords used to manipulate TAP interfaces. - -*** Keywords *** -| Honeycomb creates TAP interface -| | [Documentation] | Uses Honeycomb API to configure a new TAP interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... | - settings - Configuration data for TAP. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb creates TAP interface \ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\ -| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${settings} -| | Create TAP interface | ${node} | ${interface} -| | ... | &{settings} - -| Honeycomb configures TAP interface -| | [Documentation] | Uses Honeycomb API to configure an existing TAP interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... | - settings - Configuration data for TAP. Type: dictionary -| | ... -| | ... | *Example:* -| | ... | \| Honeycomb configures TAP interface \ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\ -| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${settings} -| | Configure interface TAP | ${node} | ${interface} -| | ... | &{settings} - -| Honeycomb removes TAP interface -| | [Documentation] | Uses Honeycomb API to remove a TAP interface. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Honeycomb removes TAP interface \ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| -| | [Arguments] | ${node} | ${interface} -| | Delete interface | ${node} | ${interface} - -| TAP Operational Data From Honeycomb Should Be -| | [Documentation] | Retrieves interface TAP configuration through Honeycomb\ -| | ... | and compares with settings supplied in argument. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... | - settings - Configuration data for TAP. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| TAP Operational Data From Honeycomb Should Be \ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\ -| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${settings} -| | ${api_data}= | Get interface oper data | ${node} | ${interface} -| | ${api_tap}= | Set Variable | ${api_data['v3po:tap-v2']} -| | Should be equal | ${api_tap['device-name']} | ${settings['device-name']} -| | ${api_mac}= | Set Variable | ${api_data['phys-address']} -| | Should be equal | ${api_mac} | ${settings['mac']} - -| TAP Operational Data From VAT Should Be -| | [Documentation] | Retrieves interface TAP configuration through VAT and\ -| | ... | compares with settings supplied in argument. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - settings - Configuration data for TAP. Type: dictionary -| | ... -| | ... | *Example:* -| | ... -| | ... | \| TAP Operational Data From Honeycomb Should Be \ -| | ... | \| ${nodes['DUT1']} \| ${{'host-interface-name':'tap1',\ -| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \| -| | ... -| | [Arguments] | ${node} | ${interface} | ${settings} -| | ${vat_data}= | TAP Dump | ${node} | ${interface} -| | Should be equal | ${vat_data['dev_name']} | ${settings['dev_name']} -| | Should be equal | ${vat_data['rx_ring_sz']} | ${settings['rx_ring_sz']} -| | Should be equal | ${vat_data['tx_ring_sz']} | ${settings['tx_ring_sz']} -# other settings not accessible through VAT commands - -| TAP Operational Data From Honeycomb Should Be empty -| | [Documentation] | Attempts to retrieve interface TAP configuration\ -| | ... | through Honeycomb and expects to recieve an empty dictionary. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| TAP Operational Data From Honeycomb Should Be empty\ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | ${api_data}= | Get interface oper data | ${node} | ${interface} -| | Run keyword and expect error | *KeyError: 'v3po:tap-v2' | Set Variable -| | ... | ${api_data['v3po:tap-v2']} - -| TAP Operational Data From VAT Should Be empty -| | [Documentation] | Attempts to retrieve interface TAP configuration\ -| | ... | through VAT and expects a "no data" error. -| | ... -| | ... | *Arguments:* -| | ... | - node - information about a DUT node. Type: dictionary -| | ... | - interface - name of an interface on the specified node. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| TAP Operational Data From VAT Should Be empty\ -| | ... | \| ${nodes['DUT1']} \| tap_int1 \| -| | ... -| | [Arguments] | ${node} | ${interface} -| | ${data}= | TAP Dump | ${node} | ${interface} -| | Should be empty | ${data} |