diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb')
| -rw-r--r-- | resources/libraries/robot/honeycomb/routing.robot | 203 |
1 files changed, 203 insertions, 0 deletions
diff --git a/resources/libraries/robot/honeycomb/routing.robot b/resources/libraries/robot/honeycomb/routing.robot new file mode 100644 index 0000000000..7e38ef1e52 --- /dev/null +++ b/resources/libraries/robot/honeycomb/routing.robot @@ -0,0 +1,203 @@ +# Copyright (c) 2017 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Library | resources.libraries.python.honeycomb.Routing.RoutingKeywords +| Documentation | Keywords used to test Honeycomb routing. + +*** Keywords *** +| Honeycomb configures routing table +| | [Documentation] | Uses Honeycomb API to configure a routing table. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - name - name for the new routing table. Type: string +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type:string +| | ... | - data - Settings for the new routing table. Type: dictionary +| | ... | - vrf - vrf-id the new table will belong to. Type: integer +| | ... | - special - Does the table contain special rules. Type: boolean +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb configures routing table \| ${nodes['DUT1']} \ +| | ... | \| table1 \| ipv4 \| ${data} \| ${1} \| ${TRUE} \| +| | [Arguments] | ${node} | ${name} | ${ip_version} | ${data} | ${vrf}=${1} +| | ... | ${special}=${EMPTY} +| | Configure routing table | ${node} | ${name} | ${ip_version} | ${data} +| | ... | ${vrf} | ${special} + +| Routing data from Honeycomb should contain +| | [Documentation] | Uses Honeycomb API to retrieve operational data about\ +| | ... | a routing table, and compares with the data provided. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - name - name of the routing table. Type: string +| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type:string +| | ... | - expected_data - Data to compare against. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Routing data from Honeycomb should contain \| ${nodes['DUT1']} \ +| | ... | \| table1 \| ipv4 \| ${data} \| +| | [Arguments] | ${node} | ${name} | ${ip_version} | ${expected_data} +| | ${data}= | Get Routing Table Oper | ${node} | ${name} | ${ip_version} +| | Should Contain | ${data} | ${expected_data} + +| Log routing configuration from VAT +| | [Documentation] | Uses test API to read routing configuration from VPP\ +| | ... | and prints received response into robot log. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Log routing configuration from VAT \| ${nodes['DUT1']} \| +| | [Arguments] | ${node} +| | Log routing configuration | ${node} + +| Honeycomb removes routing configuration +| | [Documentation] | Uses Honeycomb API to remove Honeycomb-created\ +| | ... | routing configuration from the node. Entries configured automatically\ +| | ... | by VPP will not be removed. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - name - name of the routing table to remove. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes routing configuration \| ${nodes['DUT1']} \ +| | ... | \| table1 \| +| | [Arguments] | ${node} | ${name} +| | Delete routing table | ${node} | ${name} + +| Verify Route IPv4 +| | [Documentation] | Send an ICMP packet from one TG interface and receive\ +| | ... | it on the other TG interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: integer +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer +| | ... | - tx_port - Source interface (TG-if1). Type: string +| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string +| | ... | - rx_port - Destionation interface (TG-if2). Type: string +| | ... | - rx_mac - MAC address of DUT interface (DUT-if1). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Verify Route IPv4 \| ${nodes['TG']} \ +| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth1 \| 08:00:27:cc:4f:54 \ +| | ... | \| eth2 \| 08:00:27:c9:6a:d5 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} +| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --src_mac | ${tx_mac} +| | ... | --dst_mac | ${rx_mac} +| | ... | --src_ip | ${src_ip} +| | ... | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} +| | ... | --rx_if | ${rx_port_name} +| | Run Traffic Script On Node | send_ip_icmp.py | ${tg_node} | ${args} + +| Verify Route IPv6 +| | [Documentation] | Send an ICMPv6 packet from one TG interface and receive\ +| | ... | it on the other TG interface. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: integer +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer +| | ... | - tx_port - Source interface (TG-if1). Type: string +| | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string +| | ... | - rx_port - Destionation interface (TG-if2). Type: string +| | ... | - rx_mac - MAC address of DUT interface (DUT-if1). Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Verify Route IPv6 \| ${nodes['TG']} \ +| | ... | \| 10::1 \| 11::1 \| eth2 \| 08:00:27:cc:4f:54 \ +| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} +| | ... | ${tx_mac} | ${rx_port} | ${rx_mac} +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --src_mac | ${tx_mac} +| | ... | --dst_mac | ${rx_mac} +| | ... | --src_ip | ${src_ip} +| | ... | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} +| | ... | --rx_if | ${rx_port_name} +| | Run Traffic Script On Node | send_ip_icmp.py | ${tg_node} | ${args} + +| Verify multipath route +| | [Documentation] | Send 100 ICMP or ICMPv6 packets from one TG interface\ +| | ... | and receive them on the other TG interface. Verify destination MAC\ +| | ... | addresses of the packets so that exactly 50 of them use the first\ +| | ... | address and the other 50 use the second address. +| | ... +| | ... | *Arguments:* +| | ... +| | ... | _NOTE:_ Arguments are based on topology: +| | ... | TG(if1)->(if1)DUT(if2)->TG(if2) +| | ... +| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary +| | ... | - src_ip - IP of source interface (TG-if1). Type: integer +| | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer +| | ... | - tx_port - Source interface (TG-if1). Type: string +| | ... | - tx_src_mac - MAC address of source interface (TG-if1). Type: string +| | ... | - rx_port - Destionation interface (TG-if2). Type: string +| | ... | - tx_dst_mac - MAC address of DUT ingress interface (DUT-if1).\ +| | ... | Type: string +| | ... | - rx_src_mac - MAC address of DUT egress interface (DUT-if2).\ +| | ... | Type: string +| | ... | - rx_dst_mac1 - MAC address of first next-hop option. Type: string +| | ... | - rx_dst_mac2 - MAC address of second next-hop option. Type: string +| | ... | +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Verify multipath route \| ${nodes['TG']} \ +| | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ +| | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| +| | ... | \| 00:00:00:00:00:01 \| 00:00:00:00:00:02 \| +| | ... +| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} +| | ... | ${tx_src_mac} | ${rx_port} | ${tx_dst_mac} | ${rx_src_mac} +| | ... | ${rx_dst_mac1} | ${rx_dst_mac2} +| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} +| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} +| | ${args}= | Catenate | --tg_if1_mac | ${tx_src_mac} +| | ... | --dut_if1_mac | ${tx_dst_mac} +| | ... | --src_ip | ${src_ip} +| | ... | --dst_ip | ${dst_ip} +| | ... | --tx_if | ${tx_port_name} +| | ... | --rx_if | ${rx_port_name} +| | ... | --dut_if2_mac | ${rx_src_mac} +| | ... | --path_1_mac | ${rx_dst_mac_1} +| | ... | --path_2_mac | ${rx_dst_mac_2} +| | Run Traffic Script On Node | send_icmp_check_multipath.py | ${tg_node} +| | ... | ${args}
\ No newline at end of file |