diff options
Diffstat (limited to 'resources/libraries/robot/honeycomb')
| -rw-r--r-- | resources/libraries/robot/honeycomb/bridge_domain.robot | 76 | ||||
| -rw-r--r-- | resources/libraries/robot/honeycomb/interfaces.robot | 91 |
2 files changed, 153 insertions, 14 deletions
diff --git a/resources/libraries/robot/honeycomb/bridge_domain.robot b/resources/libraries/robot/honeycomb/bridge_domain.robot index 4c455ff50d..76122fa8f9 100644 --- a/resources/libraries/robot/honeycomb/bridge_domain.robot +++ b/resources/libraries/robot/honeycomb/bridge_domain.robot @@ -114,6 +114,29 @@ | | interfaceAPI.Add bridge domain to interface | | ... | ${node} | ${interface2} | ${bd_name} | &{settings} +| Honeycomb fails to add interfaces to bridge domain +| | [Documentation] | Uses Honeycomb API to assign interfaces to a bridge\ +| | ... | domain. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface1, interface2 - names of interfaces to assign to bridge\ +| | ... | domain. Type: string +| | ... | - bd_name - name of the bridge domain. Type: string +| | ... | - settings - bridge domain specific interface settings.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb fails to add interfaces to bridge domain \ +| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \ +| | ... | \| bd-04 \| ${{split_horizon_group:2, bvi:True}} \| +| | [Arguments] | ${node} | ${interface1} | ${interface2} | ${bd_name} +| | ... | ${settings} +| | Run keyword and expect error | *Failed to validate* +| | ... | Honeycomb adds interfaces to bridge domain | ${node} | ${interface1} +| | ... | ${interface2} | ${bd_name} | ${settings} + | Honeycomb should show interfaces assigned to bridge domain | | [Documentation] | Uses Honeycomb API to verify interface assignment to\ | | ... | bridge domain. @@ -146,6 +169,29 @@ | | ... | ${if2_data['v3po:l2']['bridged-virtual-interface']} | | ... | ${settings['bvi']} +| Honeycomb should not show interfaces assigned to bridge domain +| | [Documentation] | Uses Honeycomb API to verify interface assignment to\ +| | ... | bridge domain. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface1, interface2 - names of interfaces to check bridge domain\ +| | ... | assignment on. Type: string +| | ... | - bd_name - name of the bridge domain. Type: string +| | ... | - settings - bridge domain specific interface settings.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb should not show interfaces assigned to bridge domain \ +| | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \ +| | ... | \| bd-04 \| ${{split_horizon_group:2, bvi:False}} \| +| | [Arguments] | ${node} | ${interface1} | ${interface2} | ${bd_name} +| | ... | ${settings} +| | Run keyword and expect error | *ValueError* +| | ... | Honeycomb should show interfaces assigned to bridge domain +| | ... | ${node} | ${interface1} | ${interface2} | ${bd_name} | ${settings} + | VAT should show interfaces assigned to bridge domain | | [Documentation] | Uses VAT to verify interface assignment to\ | | ... | bridge domain. @@ -154,9 +200,9 @@ | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - index - Index of bridge domains on VPP node. Starts from 0,\ | | ... | new BDs reuse numbers after a bridge domain is removed. Type: int -| | ... | - interface1, interface2 - Names of interfaces to assign to bridge\ -| | ... | domain. Type: string -| | ... | - settings - Bridge domain specific interface settings.\ +| | ... | - interface1, interface2 - names of interfaces to check bridge domain\ +| | ... | assignment on. Type: string +| | ... | - settings - bridge domain specific interface settings.\ | | ... | Type: dictionary | | ... | | ... | *Example:* @@ -176,6 +222,30 @@ | | | Should contain | ${if_indices} | ${interface['sw_if_index']} | | | Should be equal | ${interface['shg']} | ${settings['split_horizon_group']} +| VAT should not show interfaces assigned to bridge domain +| | [Documentation] | Uses VAT to verify interface assignment to\ +| | ... | bridge domain, and expects to fail. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - index - index of bridge domains on VPP node. Starts from 0,\ +| | ... | new BDs reuse numbers after a bridge domain is removed. Type: integer +| | ... | - interface1, interface2 - names of interfaces to check bridge domain\ +| | ... | assignment on. Type: string +| | ... | - settings - bridge domain specific interface settings.\ +| | ... | Type: dictionary +| | ... +| | ... | *Example:* +| | ... +| | ... | \| VAT should not show interfaces assigned to bridge domain \ +| | ... | \| ${nodes['DUT1']} \| ${4} \| GigabitEthernet0/8/0 \ +| | ... | \| GigabitEthernet0/9/0 \| ${{split_horizon_group:2, bvi:False}} \| +| | [Arguments] | ${node} | ${index} | ${interface1} | ${interface2} +| | ... | ${settings} +| | Run keyword and expect error | *No JSON object could be decoded* +| | ... | VAT should show interfaces assigned to bridge domain +| | ... | ${node} | ${index} | ${interface1} | ${interface2} | ${settings} + | Honeycomb removes all bridge domains | | [Documentation] | Uses Honeycomb API to remove all bridge domains from the \ | | ... | VPP node. diff --git a/resources/libraries/robot/honeycomb/interfaces.robot b/resources/libraries/robot/honeycomb/interfaces.robot index 02d0a49cb8..ea1d2b090b 100644 --- a/resources/libraries/robot/honeycomb/interfaces.robot +++ b/resources/libraries/robot/honeycomb/interfaces.robot @@ -90,7 +90,7 @@ | | ... | ${vat_data['admin_up_down']} == 1 | up | down | | Should be equal | ${vat_state} | ${state} -| Honeycomb sets interface ipv4 configuration +| Honeycomb sets interface ipv4 address | | [Documentation] | Uses Honeycomb API to change ipv4 configuration\ | | ... | of the specified interface. | | ... @@ -99,25 +99,21 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - netmask - subnet mask to set. Type: string -| | ... | - fib_address - IP address to add to fib table. Type: string -| | ... | - fib_mac - MAC address to add to fib table. Type: string | | ... | - settings - ipv4 interface settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv4 configuration \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \ -| | ... | \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ | | ... | \| ${{'enabled': True, 'mtu': 1500}} \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} -| | ... | ${fib_address} | ${fib_mac} | ${settings} +| | ... | ${settings} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${netmask} -| | interfaceAPI.Add first ipv4 neighbor -| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | :FOR | ${key} | IN | @{settings.keys()} | | | interfaceAPI.Configure interface ipv4 | | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']} +| | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | Honeycomb sets interface ipv4 address with prefix | | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\ @@ -128,14 +124,38 @@ | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: int +| | ... | - settings - ipv4 interface settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv4 address with prefix \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} +| | ... | ${settings} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} +| | :FOR | ${key} | IN | @{settings.keys()} +| | | interfaceAPI.Configure interface ipv4 +| | | ... | ${node} | ${interface} | ${key} | ${settings['${key}']} + +| Honeycomb adds interface ipv4 neighbor +| | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ +| | ... | specified interface. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... | - fib_address - IP address to add to fib table. Type: string +| | ... | - fib_mac - MAC address to add to fib table. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb adds interface ipv4 neighbor \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ +| | ... | \| ${{'enabled': True, 'mtu': 1500}} \| +| | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} +| | interfaceAPI.Add ipv4 neighbor +| | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} | IPv4 config from Honeycomb should be | | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\ @@ -145,7 +165,7 @@ | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string -| | ... | - netmask - subnet mask to expect. Type: string +| | ... | - prefix - prefix length to expect. Type: string | | ... | - fib_address - IP address to expect in fib table. Type: string | | ... | - fib_mac - MAC address to expect in fib table. Type: string | | ... | - settings - ipv4 interface settings to expect. Type: dictionary @@ -156,13 +176,13 @@ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \ | | ... | \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ | | ... | \| ${{'enabled': True, 'mtu': 1500}} \| -| | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} +| | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ... | ${fib_address} | ${fib_mac} | ${settings} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be equal | ${address} | | ... | ${api_data['ietf-ip:ipv4']['address'][0]['ip']} -| | Should be equal | ${netmask} -| | ... | ${api_data['ietf-ip:ipv4']['address'][0]['netmask']} +| | Should be equal | ${prefix} +| | ... | ${api_data['ietf-ip:ipv4']['address'][0]['prefix-length']} | | Should be equal | ${fib_address} | | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip'] | | Should be equal | ${fib_mac} @@ -188,9 +208,58 @@ | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 +#TODO: update based on resolution of bug https://jira.fd.io/browse/VPP-132 | | Should be equal | ${vpp_data[0]['ip']} | ${address} | | Should be equal | ${vpp_data[0]['netmask']} | ${netmask} +| Honeycomb removes interface ipv4 addresses +| | [Documentation] | Removes all configured ipv4 addresses from the specified\ +| | ... | interface. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Honeycomb removes interface ipv4 addresses \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | Remove all ipv4 addresses | ${node} | ${interface} + +| IPv4 address from Honeycomb should be empty +| | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\ +| | ... | and expects to find no IPv4 addresses. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv4 address from Honeycomb should be empty\| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} +| | Should be empty | ${api_data['ietf-ip:ipv4']['address'] + +| IPv4 address from VAT should be empty +| | [Documentation] | Retrieves interface ipv4 configuration through VAT and\ +| | ... | and expects to find no ipv4 addresses. +| | ... +| | ... | *Arguments:* +| | ... | - node - information about a DUT node. Type: dictionary +| | ... | - interface - name of an interface on the specified node. Type: string +| | ... +| | ... | *Example:* +| | ... +| | ... | \| IPv4 config from VAT should be empty \| ${nodes['DUT1']} \ +| | ... | \| GigabitEthernet0/8/0 \| +| | [Arguments] | ${node} | ${interface} +| | Run keyword and expect error | *No JSON object could be decoded.* +| | ... | InterfaceCLI.VPP get interface ip addresses +| | ... | ${node} | ${interface} | ipv4 + | Honeycomb sets interface ipv6 configuration | | [Documentation] | Uses Honeycomb API to change ipv6 configuration\ | | ... | of the specified interface. |